Anyconnect on IOS and licensing

Hi,
I would  like to know if any license i required to run anyconnect on Cisco ISO  12.4(24) T? If not when is a license required? in 15?
Best regards,
Laurent

Laurent,
IOS 15.x for ISR G2 only introduces licensing. Old ISR code especially in 12.4 trains is not affected.
Marcin

Similar Messages

  • No SSL VPN tunnel from AnyConnect to IOS

    Dear all
    Due to the annoying WWAN issues with the old Cisco VPN client (IPsec) I am trying to establish remote access to a LAN behind a Cisco 1803 using Anyconnect and SSL VPN.
    But I simply cannot make it work.
    I have a Cisco 1803 running IOS Version 12.4(15)T15 and I have tried Anyconnect 3.0 and 2.4 on Windows XP and MacOS 10.5, none of them established a VPN connection to the router, saying not a single word more but "Connection attempt has failed".
    Here is my configuration on the router:
    crypto pki trustpoint TP-self-signed-595019360
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-595019360
    revocation-check none
    rsakeypair TP-self-signed-595019360
    crypto pki certificate chain TP-self-signed-595019360
    certificate self-signed 01
      3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
    [......skipped....]
    interface Loopback123
    ip address 192.168.123.254 255.255.255.0
    ip local pool GS-POOL 192.168.123.1 192.168.123.10
    webvpn gateway GS-GW
    hostname GS-VPN-test
    ip address x.x.x.x port 443
    ssl trustpoint TP-self-signed-595019360
    inservice
    webvpn install svc flash:/webvpn/svc.pkg
    webvpn context GS-CONTEXT
    ssl authenticate verify all
    policy group GS-POLICY
       functions svc-required
       svc address-pool "GS-POOL"
    default-group-policy GS-POLICY
    gateway GS-GW
    inservice
    These are my debug settings:
    #sh debug
    WebVPN Subsystem:
      WebVPN (verbose) debugging is on
      debug webvpn entry GS-CONTEXT
      WebVPN HTTP (verbose) debugging is on
      WebVPN AAA debugging is on
      WebVPN tunnel (verbose) debugging is on
      WebVPN Single Sign On debugging is on
    And these are all debug messages I get upon incoming connection:
    Sep 13 13:12:03.267 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:12:03.271 MEST: WV: sslvpn process rcvd context queue event
    At this poibnt I have to accept the self-sigbned certificate in the AnyConnect client. Doing so repeats these messages again five times. Then I hav to accept the certificate in the client a second time (WHY?) Then the router gives these messages:
    Sep 13 13:14:10.754 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:10.754 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:10.766 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:10.766 MEST: WV: http request: / with no cookie
    Sep 13 13:14:10.766 MEST: WV-HTTP: Deallocating HTTP info
    Sep 13 13:14:10.766 MEST: WV: Client side Chunk data written..
    buffer=0x84E54AA0 total_len=191 bytes=191 tcb=0x85066820
    Sep 13 13:14:10.766 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:11.050 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:11.054 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:11.354 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:11.354 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:11.366 MEST: WV: sslvpn process rcvd context queue event
    Sep 13 13:14:11.366 MEST: WV: http request: /webvpn.html with domain cookie
    Sep 13 13:14:11.366 MEST: WV-HTTP: Deallocating HTTP info
    Sep 13 13:14:11.366 MEST: WV: [Q]Client side Chunk data written..
    buffer=0x84E54AA0 total_len=1009 bytes=1009 tcb=0x83DABBF4
    Sep 13 13:14:11.366 MEST: WV: [Q]Client side Chunk data written..
    buffer=0x84E54A80 total_len=1009 bytes=1009 tcb=0x83DABBF4
    Sep 13 13:14:11.366 MEST: WV: [Q]Client side Chunk data written..
    buffer=0x84E54A60 total_len=1009 bytes=1009 tcb=0x83DABBF4
    Sep 13 13:14:11.366 MEST: WV: [Q]Client side Chunk data written..
    buffer=0x84E54A40 total_len=1009 bytes=1009 tcb=0x83DABBF4
    Sep 13 13:14:11.370 MEST: WV: Client side Chunk data written..
    buffer=0x84E54A20 total_len=641 bytes=641 tcb=0x83DABBF4
    Sep 13 13:14:11.370 MEST: WV: sslvpn process rcvd context queue event
    At this point the Anyconnect client says "Connection attempt failed" and that's all.
    So please, any advice how to solve this?
    And do I have to install any particular svc.pkg in the flash? As far as I have found out you can install only one client package (how do you server different clients then?). But if I use permanently installed AnyConnect on my client system the installed svc.pkg on the router doesn't matter at all, right?
    Thanks a lot for any suggestions,
    Grischa

    Some more restrictions:
    12.4(15)T does not support Anyconnect in standalone mode, only web-launch (i.e. starting AC from the clientless portal). You need 12.4(20)T or later for standalone mode.
    In addition with an untrusted certificate you will run into this bug which is not resolved in 12.4(15)T:
    CSCtb73337    AnyConnect does not work with IOS if cert not trusted/name mismatch
    In short, if it's possible to upgrade, go to 15.0(1)M7  (or latest 12.4(24)Tx if 15.0 is out of the question)
    If you're stuck with 12.4(15)T,  only use AC 2.x with weblaunch and make sure the host trusts the router's certificate (create a trustpoint, enroll it, import the certificate on the client into the trusted root store).
    hth
    Herbert

  • HeartBleed vulnerability on AnyConnect for iOS

    Does anyone have additional information on this vulnerability? This security post: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140409-heartbleed
    Tells us that "Cisco AnyConnect Secure Mobility Client for iOS" is an affected product, but doesn't tell us what versions are at risk.

    This build with this fix has been posted to the iTunes store.
    AnyConnect for Apple iOS 3.0.09353 is now available for download from the Apple App Store
    Resolves CSCuo17488 – AnyConnect for iOS is vulnerable to CVE-2014-0160 – Heartbleed
    Download: https://itunes.apple.com/us/app/cisco-anyconnect/id392790924
    Release notes: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/rn-ac3-0-iOS.html
    ** Please note the two upgrade instructions pasted below which are applicable to all upgrades of AnyConnect software on Apple iOS
    Disconnect AnyConnect connection before upgrading
    Please make sure your AnyConnect VPN is disconnected when you upgrade. Otherwise, you may fail to connect after the upgrade with the following error: ”Could not connect to VPN server, Please verify internet connectivity and server address.” This issue can be fixed by a device reboot.
    Apple iOS Connect On Demand Considerations
    To ensure proper establishment of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the AnyConnect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message "The VPN Connection requires an application to start up" will display.

  • HT4972 my ipod touch wont let me update IOS and becuase of that i cant download any apps

    my ipod touch wont let me update IOS and becuase of that i cant download anything of the app world is there anyway of helping me

    Do you have a 2G iPod. Those can only go to iOS 4.2.1.
    A 1G can only go to 3.1.3
    A 3G only to 5.1.1
    Identifying iPod models
    What version of iTunes is on the computer? The latest is 11
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it

    updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
    Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.

    Is the SIM from a supported carrier?
    Is the device carrier locked, officially unlocked, or hacked to be unlocked?
    Has the SIM been reseated?  If not, try that.
    Also, basic troubleshooting is reset, restart, restore.  Has any of that been tried?

  • I updated to new ios and now it is not syncing properly.  How can i revert back to the previous installed version?

    I updated to new ios and now it is not syncing properly.  New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs.  It previously synced perfectly before the IOS update.  How can i revert back to the previous installed version?

    Downgrading the iOS is not supported by Apple.
    Try:
    Re: What does the gray dotted circle in iTunes mean?
    https://discussions.apple.com/thread/4676111?tstart=0\\
    Dotted circles next to songs, won't sync, red circle with square?

  • Having a problem with my ipad... I tried to install ios and the ipad has frozen

    I am having a problem with my Ipad air.  tried to install ios and my ipad has frozen

    Click here and follow the instructions.
    (124611)

  • Report for IOs and PR

    HI Gurus
    Please tell me the T code for report which will list the IOs and corresponding PR s
    Thanks
    Avadhut

    Hi,
    Use ME5A.
    Reg,
    Ashok

  • I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty

    I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty and been able to resolve it?

    Did you try deleting the mail account, then adding it back?   I've read a lot of times that is what needs to happen in order for it to work properly.

  • I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?

    I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?
    This is due to the different changes Adobe has gone through and unfortunately I used different emails at certain times.

    Under one Adobe ID you can have one CC only,if by accident you have purchased two CC under one account, it needs to be cancelled & refunded, please contact Adobe Support at
    http://adobe.ly/yxj0t6
    Regards
    Rajshree

  • Is it possible to synchronize mail between all iOS and OS devices?

    I am running an iPhone 5 and iPads 3 & 4 with iOS 8.1 plus 2 MacBook Pros, and 3 (4th ordered) Mac minis with OS Yosemite 10.10. I also use an iPhone 4 and iPad 1 with older iOS software but mail is not important on them. I am the only user of these devices (reason = personal convenience).
    I have mail accounts with Hotmail, Live, iCloud, Yahoo and Centurylink.
    My problem is that because the mail is not synchronized (deleting an email on one device does not delete it from other devices or from the server) I now have up to and over 10,000 accumulated emails on various devices. I don't mind keeping all my old emails IF I could eliminate all the emails I choose to delete from any of the devices.
    The result is that email has become unmanageable for me.
    I had very high hopes that Apple would fix this with Yosemite and iOS 8.1 but that does not appear to be the case.
    I suppose I could work around it by always going to Hotmail, Live, Yahoo, Centurylink etc. on the internet and not using iOS and OS mail but that seems a dumb way to have to do it.
    Every time I buy a new iOS or OS device (like the new mini) it compounds the problem with yet another disorganized mail mess.
    There is so much spam, phishing, data mining etc. going on that I use the multiple email accounts to pre-filter anticipated email responses. As an example I need a Yahoo account to use Yahoo but I know almost all Yahoo mail is spam so I can ignore it most of the time.
    Any suggestions?
    Thanks

    Thank you for your reply.
    I am somewhat new to iOS and OS having grown up with DOS and Windows. I am not familiar with IMAP and iCloud and I am not even sure which types of servers my various emails use.
    The problem I would anticipate with iCloud is that (I assume) it would limit my access to data (including mail) on the iCloud to when I happen to be logged onto the internet. I also assume(?) that large files (photos etc.) would require some time to download whenever I wish to access them from whichever device I happen to be using (I hope I am wrong about this).
    I have kept my devices to 500gb - 1TB for OS and 32gb - 128gb for iOS but since I have pretty slow WiFi (shared with DirecTV Whole Home and Netflix streaming) it is my impression that iCloud might be quite limited due to data transfer times.
    Perhaps a factor would be that I have 2 DSL lines and my main DSL line is connected to two wireless routers (to also provide WiFi in a metal building that blocks WiFi and Cellular signals)
    I may be totally wrong in my assumptions regarding iCloud. My mail is not so urgent that I need access to it instantly and I could wait until I had internet access or I can get it on my iPhone. My main concern with iCloud would be my data files (Word, Pages, Excel, Numbers etc.).
    On the other hand, if I wanted to keep my 10,000 emails that would take up a lot of iCloud memory and I don't know how to measure how much storage it would take or how to move Hotmail or even iCloud mail to iCloud.
    It may take me some time to figure this out.

  • Is there a way to open the settings app from an air app on both iOS and android?

    Since you can't change the notifications settings within the app, is there a way to simply open the settings app from an air app? like a link or something like that?

    Even on iOS this has only recently been added by Apple for iOS 8 only using the line:
    [[UIApplication sharedApplication] openURL:[NSURL URLWithString:UIApplicationOpenSettingsURLString]];
    So you would have to wrap this in an ANE and then again, only for iOS and only call it in iOS 8+

  • HT4962 I have an Ipod Touch 2nd generation with version 4.2.1 IOS and it no longer seems to be recognized as a device when I plug into my computer. I want to update my sync settings but can't do this without being able to select the device. Any suggestion

    I have an Ipod touch 2nd generation with version 4.2.1 IOs and it is no longer recognized as a device when I plug into my computer. This means I can not change synch settings - any ideas on what I need to do ?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I recently updated my iPhone to the new iOS and it no longer works with my inbuilt car bluetooth. Is it possible to restore to my previous iOS system?

    I recently updated my iPhone to the new iOS and it no longer works with my inbuilt car bluetooth. Is it possible to restore to my previous iOS system?

    Delete the pairing and then re-pair the devices.
    There are no supported methods to downgrade the iOS.

Maybe you are looking for