AnyConnect on VIsta x64 Ultimate

Hi All,
Somehow my AnyConnect client has stoped working on Vista x64 Ultimate. It works fine on any other system (XP, Vista Home, Vist Business, etc.) I'm using version 2.3.0254
I get this message when I try to connect.
The VPN client was unable to successfully verify the IP forwarding table modifications. A VPN connection will not be established.
Any help would be appreciated.
Thanks,
Alex

Please make sure UAC is disabled on Vista. Also, is there any other software you may have installed on the box that might be disallowing the box from modifying the routing table. Some Internet Security software, or maybe you're using a Broadband card?

Similar Messages

No Audio - External Speakers - Running VISTA x64 Ultimate

I have seen numerous references to this problem in the forum archives... but no solutions yet.
I run Vista x64 Ultimate natively on the Mac Pro - no VMware or other emulation software.
Everything works great EXCEPT audio: I have searched and searched and need an expert.
All OSX, Firmware, and Bootcamp drivers are up to date.
Realtek Audio doesn't not recognize the rear external audio port. I plugged in / out / in etc., nothing. All audio comes from the internal tower speaker.
My speakers use the standard analog jack, they are new Bose MusicMonitor speakers.
Things I have done:
Vista Audio Settings - all ok, all set to max, double checked - nothing.
New Realtek Audio Drivers - tried installing newer version - nothing.
Reinstalled Bootcamp Drivers - nothing.
Reinstalled Bootcamp Drivers (original disk) + Bootcamp Vista Drivers (new release) - nothing.
BTW - the speakers work just great under OSX - they produce awesome sound - so it's not a hardware issue.
Thanks - I hoping someone has discovered a solution!

P.S. I have the X-Fi Platinum.
I left that out in my original post.

Vista x64 Ultimate

Anyone using T400 with Vista x64 Ultimate?
Regards
Dr. Khan

Please make sure UAC is disabled on Vista. Also, is there any other software you may have installed on the box that might be disallowing the box from modifying the routing table. Some Internet Security software, or maybe you're using a Broadband card?

GX630 and Vista x64 Ultimate Sleep Mode

I have MSI GX630 and having trouble to wake my notebook after sleep mode at Vista x64 Ultimate Sp1 edition
When my notebook goes to sleep mode everything ok.power led is blinking.When I press Power Button fan starts wireless led is ok but screen is black.And I m not able to start system till I unplug/plug AC and Battery
Msi Service in Turkey checked my notebook.they unpluged/pluged motherboards battery to reset bios ( I think :D )and flashed bios back to 1.02 ( i was using 1.05 ).But same result.They said they don't have any idea:)
There is no problem in 32 bit vista home edition
I tried many Vga drivers.Now using moded 181.20
I tried all bios versions released on msi website.
All other drivers are up to date.
There are lots of users having same problem
I will be glad if anyone can help me.
Thanks

They wouldn't, not officially. NVIDIA started to support gamers with laptops and will do it in future, regularly. But the real problem is, that most of other vendors have their GPUs supported in those drivers and MSI doesn't, it's completely missing NVMI.INF file. Note, that there is no universal INF file, but many of them named after vendors according to the NVIDIA's filename scheme.
But beta status has not to do with the fact those drivers are working and MSI products simply aren't there.
Other side of the issue is, that MSI is selling so called gaming laptops and didn't updated the drivers since, well, July 2008 (GX630, ForceWare 176.10) or September 2008 (GX620, Forceware 176.60). It just cannot keep up with game releases and bug fixes for new games included in every ForceWare release. This kind of support is simply not enough for the respective audience.
Don't understand me wrong - the products are excellent and even my brother just ordered GX630.
Back to the issue - guys, try to use newer drivers for GX620 if you have MSI laptop with NVIDIA - and yes, even when it's not GX620. All NVIDI GPU's should be supported, check the list:
Quote
NVIDIA_C77.DEV_0844.2 = "NVIDIA GeForce 9100M G"
NVIDIA_C77.DEV_0844.3 = "NVIDIA GeForce 9100M G "
NVIDIA_C79.DEV_086F.1 = "NVIDIA MCP79MVL"
NVIDIA_G73.DEV_0398.2 = "NVIDIA GeForce Go 7600"
NVIDIA_G84.DEV_0405.1 = "NVIDIA GeForce 9500M GS"
NVIDIA_G84.DEV_0407.1 = "NVIDIA GeForce 8600M GT"
NVIDIA_G84.DEV_0407.2 = "NVIDIA GeForce 8600M GT "
NVIDIA_G84.DEV_0407.3 = "NVIDIA GeForce 8600M GT "
NVIDIA_G84.DEV_0407.4 = "NVIDIA GeForce 8600M GT "
NVIDIA_G84.DEV_0407.5 = "NVIDIA GeForce 8600M GT "
NVIDIA_G86.DEV_0425.1 = "NVIDIA GeForce 8600M GS"
NVIDIA_G86.DEV_0425.2 = "NVIDIA GeForce 8600M GS "
NVIDIA_G86.DEV_0425.3 = "NVIDIA GeForce 8600M GS "
NVIDIA_G86.DEV_0425.4 = "NVIDIA GeForce 8600M GS "
NVIDIA_G86.DEV_0425.5 = "NVIDIA GeForce 8600M GS "
NVIDIA_G86.DEV_0425.6 = "NVIDIA GeForce 8600M GS "
NVIDIA_G86.DEV_0425.7 = "NVIDIA GeForce 8600M GS "
NVIDIA_G86.DEV_0427.1 = "NVIDIA GeForce 8400M GS"
NVIDIA_G86.DEV_0427.2 = "NVIDIA GeForce 8400M GS "
NVIDIA_G86.DEV_0427.3 = "NVIDIA GeForce 8400M GS "
NVIDIA_G86.DEV_0428.1 = "NVIDIA GeForce 8400M G"
NVIDIA_G86.DEV_0428.2 = "NVIDIA GeForce 8400M G "
NVIDIA_G86.DEV_0428.3 = "NVIDIA GeForce 8400M G "
NVIDIA_G86.DEV_0428.4 = "NVIDIA GeForce 8400M G "
NVIDIA_G94.DEV_062B.1 = "NVIDIA GeForce 9800M GS"
NVIDIA_G96.DEV_0649.4 = "NVIDIA GeForce 9600M GT"
NVIDIA_G96.DEV_0649.5 = "NVIDIA GeForce 9600M GT "
NVIDIA_G96.DEV_0649.6 = "NVIDIA GeForce 9600M GT "
NVIDIA_G96.DEV_0649.7 = "NVIDIA GeForce 9600M GT "
NVIDIA_G96.DEV_0649.8 = "NVIDIA GeForce 9600M GT "
NVIDIA_G96.DEV_0649.9 = "NVIDIA GeForce 9600M GT "
NVIDIA_G98.DEV_06E9.4 = "NVIDIA GeForce 9300M GS"
NVIDIA_G98.DEV_06E9.6 = "NVIDIA GeForce 9300M GS "
NVIDIA_G98.DEV_06E9.7 = "NVIDIA GeForce 9300M GS "
NVIDIA_G98.DEV_06E9.8 = "NVIDIA GeForce 9300M GS "
Those are probably the newest official NVIDIA drivers from MSI.
Other thing you can try to deal with the sleep mode issue is to disable PowerMizer in driver's control panel. I cannot try it by myself (have only ATI and Intel VGA here), but found it on LaptopVideo2Go site.

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

Why doesn't the latest update replace Flash10b.ocx v10.0.22.87 with the latest Version 10.0.32.18 on Vista X64 Ultimate?

The Secuna Online Scanner reports that Flash10b.ocx in directory C:\Windows\SYSTEM32\Macromed\Flash\ should be replaced by version 10.0.32.18 even after I run the update installer pointed to by Secunia. I would note that there is no C:\Windows\SYSTEM32\Macromed\Flash\ directory on my system. The Flash10b.ocx file is located in the C:\Windows\SysWOW64\Macromed\Flash\ directory and is still version 10.0.22.87 according to the properties dialog for the file. I should note that Firefox is my default web browser but of course IE is installed and working.

I assumed that the updated file would also be Flash10b.ocx but it appears that it becomes Flash10c.ocx and I did not notice the additional file.

PC Suite 6.84, Restore crash under Vista x64 Ultim...

Hello, there. I have PC Suite 6.84 and, of course contents copier V4.0 on Vista Ultimate x64. Backup went very well with both N73ME or 6267. However, on Restore part, when go to part that ask us which Backup you want to restore, it crashs and Windows has to close program.
PS. Not a problem with WinXP. All with USB connection.
What should I do? Any suggestion??
Also, N-Series PC suite have had the similar problem but right from start Contents Copier V3.0. Is there any bugs in program or it just Winows Vista?Message Edited by delixis on 28-Oct-200703:47 AM
C6-00 with 8GB MicroSD

There are no suggestions what so ever. This means I'm alone or no body here use Vista x64 Ultimate version. Please shade some light on me.
C6-00 with 8GB MicroSD

Cannot install Photoshop CS4 Trial on Vista x64

Hi everyone,
I got a big problem, I download the Photoshop Extended Trial Version and extracted it without any problem. But when I double-click setup.exe nothing happens. It seems to popup a window, but its gone every fast. When I open the Taskmanager I can see the setup.exe under processes, but nothing happens also after hours of waiting.
My PC:
Intel E8400
4 Gb G.Skill DDR1000
Gigabyte P35-DS3
Gecube HD3780 X-Turbo
Windows Vista x64 Ultimate
C: (NTFS) 94800 MB (18418 MB frei)
H: (NTFS) 61440 MB (27418 MB frei) <--- here I extracted the Folder
What I had tried beforce:
- Installing in safe-mode = same problem
- register jscript.dll myself = same problem
- Uninstall CS3 = same problem
- Using AdobeCS3Cleaner
- Using AdobeCS3Cleaner -> found nothing...
- delete last things of CS3 with TuneUp

Peter,
To avoid complications, I would have uninstalled the trial first, then run the Adobe clean-up script, followed by the installation of the full version using the default location.
This has both a 32 bit and a 64 bit component, installed as follows:
32 bit C:\Program Files (x86)\Adobe\Adobe Photoshop CS4
64 bit C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit*)
The 64 bit version will be the default on a 64 bit OS.
In your situation I would uninstall everything related to CS4, run the Adobe clean-up script and start again.
* Adobe should note that
bits have a small
b and Bytes have a big one!

Another CS4 and Vista x64 GPU SLi Support Question

After reading some of the forums I could not really find a clear answer on the following:
I am running Vista x64 Ultimate on a QX6850 system with 8GB of RAM. I also have 2x XFX8800GT graphics cards running in SLi with the latest Nvidia drivers (181.20). Dxdiag testing provides no errors.
The GPU support features in CS4 x64 (and x32) is greyed out with the text wording of no support in Photoshop standard. Based on some of the threads posted here, I tried enabling or disabling some settings in the Nvidia control panel, but the only one that seem to enable the GPU support is to deactivate SLi completely (which sort of defeats the purpose in 3D graphics).
Does CS4 support an SLi setup? If not, will there be any difference in performance with SLi disabled and using the CS4 GPU support vs the other way around?
Thank you for your assistance.

Negitive. It is written on the CS4 requirements section. Only 1 GPU.

Windows VISTA x64 ramdomly force-shut Premiere before it starts

Hi,
I just upgraded to Vista x64 Ultimate and all is updated and shiny new with Premiere CS2 and CS3 installed and Master COllection CS4 trial.
The problem is that Vista will sometimes runs CS3 well (always CS2), but it sometimes gives me the Windows will shut down the software.
At first I thought it was CS4 so I installed it but it still does it sometimes then stops and then again.
thank you for your help.

try opening the project, clicking OK when it tells you that the scratches are write protected, and then when it opens, go to the top menu bar and click Project > project settings > Scratch discs and re-point your scratches to the location you want them. Save, and you should be good to go.

Vista x64 bit GUI "Quirks"

Has anyone else running a 64 bit version of Vista experience weird GUI issues in iTunes 8? Mine range from disappearing minimize,maximize and close buttons to when iTunes loads up it's all black (issue was also in iTunes 7 as well).
Message was edited by: Gearz1701

Yes, I'm running version 8.0.1 of iTunes on Windows Vista x64 Ultimate and have a lot of problems like those you described. I haven't noticed such problems with earlier versions of iTunes.
-Steff1

Quicktime 7.2 under Vista x64

I am using iTunes 7.3.1 under Vista x64 Ultimate with no issues. However, Quicktime 7.2 doesn't work very well.
When I open .mp4 vidoes which run fine under Windows Media Player, Quicktime Player seems to stubmle.
I get the following errors:
-The video screen turns green
-Video stutters
-Audio seems to play ok
I am running on an AMD 3800 x2 with nVidia 7900GTO video card (using latest WHQL video drivers from nVidia).
Are there known issues with Quicktime with Vista x64?

I have the same issue with QT running on Vista. The new version of QT that just came only made things worse!!! Now the tv shows I purchased from iTunes shuts iTunes down when I try to view them. At first, I was getting the green screen, video stuttering, etc.
I tried ALL the recommended fixes:
- Changing the settings in QT to take off Direct3D
- changing the settings in QT to "safe mode"
- Updating my Nvidia graphics card driver
- Going into my bios to ensure my hard drive was not using the RAID array
- Uninstalling QT and reinstalling
This is DEFINITELY a QT (Apple) issue. They simply do not support Vista. I have already stopped purchasing video media on iTunes until QT is updated to run smoothly with Vista.
All that to say... you can search discussion boards all you want, but there is no real fix for QT to run smooth video (audio is OK) in Vista.
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.01 GHz w/ 2Gigs RAM Windows Vista 80 Gig Video iPod
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.01 GHz w/ 2Gigs RAM Windows Vista 80 Gig Video iPod

Vista x64 SP2 Install Broke My Volume Panel

Hi,
As subject says.
I installed Vista x64 SP2 yesterday and now my microphone wont work because?in the control panel it says Microphone FP not connected.
This is obvious I dont have a front panel!
I used to change this in the Volume Panel and all would be well except now I have installed SP2 it wont let me load the volume panel.
It shows up in my task bar next to the clock and I can right click on it. It says Creative SB X-FI and I can select the Enable?DTS etc etc so the driver is installed ok but when I double click it to get the volume panel on screen nothing happens.
It doesnt even come up with an error.
I have tried uninstalling everything and reinstalling = nothing.
Then done an auto update, still nothing.
I hope someone can help, its really annoying not being able to talk to anyone over TS.
My specs are
Asus P5KE
Core 2 Quad Q6600
GeForce GTX260
4 x gb 066mhz memory
2 x WD Raptors RAID0
Soundblaster X-FI Titanium Fatalty PCI-E
Logitech Z5500 Digital Surround Sound
Vista x64 Ultimate
Thanks in advance
Message Edited by MikeChandler on 05-28-2009 03:5 [email protected]

Excellent all fixed.
Not as easy as we thought though.
First had to uninstall everything via add remove programs.
Then deleted everything I could find that related to Creative.
I found stuff in Program Files / Program Data & Program Files (x86)
Unfortunately I couldnt delete it all because it was in use, so had to reboot in safe mode and delete it all from there.
Then installed the package you suggested and indeed Volume Panel and everything else works again.
Thank You

Vista x86 ultimate version switch to x64

I just bought a W500(4058CTO) with Vista x86 ulitmate version.
Now I need vista x64 for some program, Can I apply the recovery disc for x64 version?
Or I have to install by scratch Vista x64?

You will need to install Vista X64, it's drivers, and it's management software manually. If your'e W500 was preinstalled with Vista x86, then you have that OS as you're recovery image. If Lenovo was able to provide you with a Vista x64 recovery disc, then they would have to charge you a licensing fee as it is a new OS for your configuration.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Vista X64 Drive Management Snap-In Error with SD Cards

I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg ‏204 KB

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

AnyConnect on VIsta x64 Ultimate

Similar Messages

Maybe you are looking for