AnyConnect - Posture Assessment Failed: Unable to get the available CSD version....

Hello all
I am attempting to get the HostScan posture assessment working so we can check that any device connecting to the ASA is a valid corporate asset.
I have installed the posture module onto our test client machine (Windows 8.1) using the following software:
anyconnect-posture-win-4.0.00061-pre-deploy-k9
Then in ASDM under Remote Access VPN > Host Scan Image I have uploaded the following package:
disk0:/hostscan_3.1.06073-k9.pkg
...and ticked the box 'Enable Host Scan/CSD'.
Under Remote Access VPN > Secure Desktop Manager I have configured an initial simple Prelogin policy to test it working, this simply just checks that the OS is Windows 8. A success should map this user to a Group Policy I have created that is mapped to a Connection Profile.
So, with all that said, when I try to connect I see that the AnyConnect client going through the motions: "Posture Assessment: Checking for updates....", after which I get a pop-up and error message:
"Posture Assessment Failed: Unable to get the available CSD version from the secure gateway"
A bit stumped here and haven't quite found much on the web as to how to resolve this.
Has anyone encountered this before? If so, can you advise on what I can do
By the way I am connecting using IKEv2 (IPsec) as these are the requirements and the AC version is 4.0.00061, ASA version: 9.2(1).
Many thanks

Hello
Please forgive the shameless bump. Was hoping someone could help?
Many thanks

Similar Messages

Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home. Our EM version is 12.1.0.4.
We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch". This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
Description from the above mentioned bug is our same issue. We do not have this issue when we use patch plans against an 11.2.x oracle_home target. It is unique to 12.1.0.2 oracle_home target.
Description from the bug:
The Plan failed in step "Run Prerequisite Checks" with the following errors:
PREREQ_NAME: Minimum Version of OPatch
PREREQ_DESC: Check if the required version of OPatch is present on the target
PREREQ_TYPE: PATCH_TOOL_CHECK
PREREQ_STATUS: FAILED
PREREQ_MESG: Unable to get the version of OPatch at
/u01/app/oracle/product/12.1.0/dbhome_2/Opatch
We have opened an SR to see if we can get more info on what was already identified as a bug. Has anyone else experienced this issue? If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
Thanks.

You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home). If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you. If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround. The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon. I would ask the support analyst to request the backport for your plugin/patch level...

When trying update I get a message: Update failed unable to extract the downloaded files U44M1I20

when trying to update I get a message: Update failed unable to extract the downloaded files U44M1I20

geetib, others,
It should be here:
Error U44M1I210 | Install updates

Posture Assessment Failed:Hostscan Initialize error in Window 8 x64

I’m using Windows8 Enterprise x64,while using Cisco AnyConnect mobility client(installed filename is anyconnect-win-3.0.2052-web-deploy-k9.exe), it show error:
Posture Assessment Failed：Hostscan Initialize error
this is not being resolved,then I go back to Windows 7. Today I’ve changed the value of the registry as the guide( HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva; changed the value to "Cisco AnyConnect Secure Mobility Client Virtual Miniport Adapter for Windows x64"), but it does NOT work yet. I re-installed the client software via the lastest anyconnect-win-3.1.00495-web-deploy-k9.exe, it still show the same error:
Posture Assessment Failed：Hostscan Initialize error
So boring it is! I would go back to Windows 7 one more time. Any advise???
[周四 11月 08 23:06:03.075 20][libcsd][all][csd_init] hello
[周四 11月 08 23:06:03.075 20][libcsd][all][csd_init] libcsd.dll version 3.0.08062
[周四 11月 08 23:06:03.075 20][libcsd][debug][hs_transport_init] initialization
[周四 11月 08 23:06:03.075 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\winhttp.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.075 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\winhttp.dll)
[周四 11月 08 23:06:03.075 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\winhttp.dll]: 2148204800
[周四 11月 08 23:06:03.075 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\winhttp.dll)
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\winhttp.dll]: 2148098064
[周四 11月 08 23:06:03.107 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\winhttp.dll)
[周四 11月 08 23:06:03.107 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\winhttp.dll).
[周四 11月 08 23:06:03.107 20][libcsd][debug][hs_transport_winhttp_init] failed to initialize winhttp with absolute path
[周四 11月 08 23:06:03.107 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\kernel32.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\kernel32.dll)
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\kernel32.dll]: 2148204800
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\kernel32.dll)
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\kernel32.dll]: 2148098064
[周四 11月 08 23:06:03.138 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\kernel32.dll)
[周四 11月 08 23:06:03.138 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\kernel32.dll).
[周四 11月 08 23:06:03.138 20][libcsd][error][load_system_lib] Failed to initialize kernel32.dll
[周四 11月 08 23:06:03.138 20][libcsd][debug][hs_dl_load_no_signature] winhttp.dll has been loaded successfully with no signature verification
[周四 11月 08 23:06:03.138 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\crypt32.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\crypt32.dll)
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\crypt32.dll]: 2148204800
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\crypt32.dll)
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\crypt32.dll]: 2148098064
[周四 11月 08 23:06:03.169 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\crypt32.dll)
[周四 11月 08 23:06:03.169 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\crypt32.dll).
[周四 11月 08 23:06:03.169 20][libcsd][debug][hs_transport_winhttp_init] failed to initialize crypt32
[周四 11月 08 23:06:03.169 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\wininet.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\wininet.dll)
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\wininet.dll]: 2148204800
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\wininet.dll)
[周四 11月 08 23:06:03.185 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\wininet.dll]: 2148098064
[周四 11月 08 23:06:03.185 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\wininet.dll)
[周四 11月 08 23:06:03.185 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\wininet.dll).
[周四 11月 08 23:06:03.185 20][libcsd][error][hs_transport_init] initialization failed
[周四 11月 08 23:06:03.185 20][libcsd][debug][hs_transport_free] de-initialization
[周四 11月 08 23:06:03.185 20][libcsd][debug][hs_transport_free] de-initialization done
[周四 11月 08 23:06:03.185 20][libcsd][debug][hs_transport_free] de-initialization [周四 11月 08 23:06:03.075 20][libcsd][all][csd_init] hello
[周四 11月 08 23:06:03.075 20][libcsd][all][csd_init] libcsd.dll version 3.0.08062
[周四 11月 08 23:06:03.075 20][libcsd][debug][hs_transport_init] initialization
[周四 11月 08 23:06:03.075 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\winhttp.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.075 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\winhttp.dll)
[周四 11月 08 23:06:03.075 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\winhttp.dll]: 2148204800
[周四 11月 08 23:06:03.075 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\winhttp.dll)
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\winhttp.dll]: 2148098064
[周四 11月 08 23:06:03.107 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\winhttp.dll)
[周四 11月 08 23:06:03.107 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\winhttp.dll).
[周四 11月 08 23:06:03.107 20][libcsd][debug][hs_transport_winhttp_init] failed to initialize winhttp with absolute path
[周四 11月 08 23:06:03.107 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\kernel32.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\kernel32.dll)
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\kernel32.dll]: 2148204800
[周四 11月 08 23:06:03.107 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\kernel32.dll)
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\kernel32.dll]: 2148098064
[周四 11月 08 23:06:03.138 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\kernel32.dll)
[周四 11月 08 23:06:03.138 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\kernel32.dll).
[周四 11月 08 23:06:03.138 20][libcsd][error][load_system_lib] Failed to initialize kernel32.dll
[周四 11月 08 23:06:03.138 20][libcsd][debug][hs_dl_load_no_signature] winhttp.dll has been loaded successfully with no signature verification
[周四 11月 08 23:06:03.138 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\crypt32.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\crypt32.dll)
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\crypt32.dll]: 2148204800
[周四 11月 08 23:06:03.138 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\crypt32.dll)
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\crypt32.dll]: 2148098064
[周四 11月 08 23:06:03.169 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\crypt32.dll)
[周四 11月 08 23:06:03.169 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\crypt32.dll).
[周四 11月 08 23:06:03.169 20][libcsd][debug][hs_transport_winhttp_init] failed to initialize crypt32
[周四 11月 08 23:06:03.169 20][libcsd][debug][hs_file_verify_with_killdate] verifying file signature: file = [C:\Windows\system32\wininet.dll], signer = [Microsoft Corporation], type = [1]
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_file] checking signature by file (C:\Windows\system32\wininet.dll)
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_file] unable to verify trust for [C:\Windows\system32\wininet.dll]: 2148204800
[周四 11月 08 23:06:03.169 20][libcsd][debug][check_signature_by_catalog] checking signature by catalog (C:\Windows\system32\wininet.dll)
[周四 11月 08 23:06:03.185 20][libcsd][debug][check_signature_by_catalog] unable to verify trust for [C:\Windows\system32\wininet.dll]: 2148098064
[周四 11月 08 23:06:03.185 20][libcsd][error][hs_file_verify_with_killdate] unable to verify file signature: (C:\Windows\system32\wininet.dll)
[周四 11月 08 23:06:03.185 20][libcsd][error][hs_dl_load] file signature invalid, not loading library (C:\Windows\system32\wininet.dll).
[周四 11月 08 23:06:03.185 20][libcsd][error][hs_transport_init] initialization failed
[周四 11月 08 23:06:03.185 20][libcsd][debug][hs_transport_free] de-initialization
[周四 11月 08 23:06:03.185 20][libcsd][debug][hs_transport_free] de-initialization done
[周四 11月 08 23:06:03.185 20][libcsd][debug][hs_transport_free] de-initialization

I've successfully solved this problem by using both web-based SSL-VPN login and latest AnyConnect Secure Mobility Client. After I installed anyconnect-win-3.1.00495-k9, I open the URL of my company's ssl vpn, followed the steps then logged in, thus it calls the client to establish a vpn connection. It successed!
VPN CONNECTED LIKE THIS:

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Unable to get the AppsLocalLogin.jsp page

Hi,
We are on oracle Db 11.2.0.2 and EBS : 11.5.10.2 on Solaris Sparc 64 Bit 5.10.
We have recently added a web node to an existing setup.
Although Apache services are up , but we are unable to get the AppsLocalLogin.jsp page.
Replacing the domain name and Ip in line 4 with HOSTNAME.DOMAIN_NAME/IPADDRESS
We have found the below error in the Jserv log :
[12/04/2012 20:09:38:868 IST] <info> ApacheJServ/1.1.2 is starting...
[12/04/2012 20:09:38:868 IST] <debug> using confFile /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties
[12/04/2012 20:09:39:016 IST] <info> Connection authentication enabled
[12/04/2012 20:09:39:045 IST] <info> Connection allowed from HOSTNAME.DOMAIN_NAME/IPADDRESS
[12/04/2012 20:09:39:045 IST] <info> Connection allowed from /127.0.0.1
[12/04/2012 20:09:39:046 IST] <debug> port 16000 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16001 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16002 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16003 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16004 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16005 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16006 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16007 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16008 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16009 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> try to start on port 16000
[12/04/2012 20:09:39:050 IST] <debug> try to start on port 16001
[12/04/2012 20:09:39:050 IST] <debug> cannot create socket on 16000
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16001
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16002
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16002
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16003
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16003
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16004
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16004
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16005
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16005
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16006
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16006
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16007
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16007
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16008
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16008
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16009
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16009
ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.
[12/04/2012 20:09:39:053 IST] <critical> ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.The IP of this web node is different from the IP mentioned in the log, at line 4.
Regards
KK

Hi;
ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.Please check your port is avaliable or not also check related path
Regard
Helios

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

Failed to get the Availability State on server Distriubtionpoint1 for role SMS Distribution Point

Distriubtionpoint1-- Server share distribution point
Distriubtionpoint1-- Acting as site system role (DP)
Distriubtionpoint1--attached under the primary PR0 (Primary server0)
Primary server0-- reporting to CS0 (central site 0)
Distriubtionpoint1-- Windows 2008 sp1 r2 standard
Infrastructure details:-
=============
Distriubtionpoint1 located in different domain with one way trust.
1) Check ping status with FQDN from both domain and it is success.
2) Check port 135, 445, 80,443 through telnet from both domain and success.
3) Primary Server0 account is member of the local admin group on Distriubtionpoint1.
4) Check the PR0-SCCM-DP$ folder NTFS & Share permission
Share permission
a) everyone & local admin group has full control
Security permission
a) System has full permission
b) user has read & exec
4) Local admin full
Sitestat.log error message:
---->: Failed to get the Availability State on server
Distriubtionpoint1 for role SMS Distribution Point. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:15 PM 952 (0x03B8)
---->: Now polling via NAL for SiteObject "["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\" SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
---->: The NAL path ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ is currently not accessible. SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
Info>: Unable to get available space for the Site Object ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
STATMSG: ID=4701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_SYSTEM_STATUS_SUMMARIZER" SYS=Distriubtionpoint1 SITE=PR0 PID=4112 TID=952 GMTDATE=Wed Apr 23 01:00:18.002
2014 ISTR0="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR1="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR2="2014 04 4 17 04 31 31 000" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:18 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
---->: GetOperationsManagementData failed to connect to ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\; error
= 5. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:20 PM 952 (0x03B8)

I have tried to access the server share DP from the primary server by using my user
credential. Yes I can able to access the share.
But when I use the system credential to access the share received an error message as shown in below screenshot
Hence i have provided the share and ntfs permission administrators, system, everyone,
primary server account with full control on both tab. but still i am receiving error message.
:\temp>whoami
US\prasath
c:\temp>dir \\PrimaryServer1\SCCM-DP$
Volume in drive \\PrimaryServer1\SCCM-DP$ is Data
Volume Serial Number is 22F0-661B
Directory of \\PrimaryServer1\SCCM-DP$03/17/2014
03:33 PM <DIR> .03/17/2014 03:33 PM <DIR> .
04/01/2014 08:04 AM <DIR> SMSPKG
0 File(s) 0 bytes
3 Dir(s) 514,625,064,960 bytes free
===========================================
C:\Windows\system32>whoami
nt authority\system
C:\Windows\system32>dir
\\PrimaryServer1\SCCM-DP$
Access is denied.

Update failed: Unable to extract the download files (why????), error U44M1210. What's that ?

When downloading Premiere Pro CC, in Creative Cloud, I'm getting a message:
Update Failed
Unable to extract the downloaded files. Press retry.
(U44M1210)
Sometimes it happens when I'm updating extensions.
Can I directly download and update apps WITHOUT using the Creative Cloud desktop app ?
Please advice.

I had the same problem on a Mac (CC update failing with a U44M1210 error.
. I just finished a chat with an Adobe specialist who walked me through the solution. So I recommend a chat to solve the problem for me (and I suspect all Mac users).
The Solution essentially this came down to the following:
Deleting the following:
OOBE and AAM Updater folders from ~/library/Application Support/Adobe
OOBE and Adobe Application Manager folders from /Library/Application Support/Adobe
Reinstalling the Adobe Application Manager.
Restarting the Creative cloud Application.

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed. I get the opening window where it says installing plugins searching etc, after which PS opens in full screen. Just moments after that there's a fail warning, no code number, only

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed.
I get the opening window where it says installing plugins searching etc, after which PS opens in full screen.
Just moments after that there's a failure warning, no code number, only the warning that PS failed to open and PS will close.
I tried downloading it for a second time, but this did'nt solve the problem.
Befor the CC version I used a one year student version of Adobe CS6.
What can I do?

Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Unable to get the values from PAYLOAD

Hi,
i'm unable to get the values of payload. When i use
currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
Element payload = (Element)currentTask.getPayloadAsElement();
node = (Element)payload.getFirstChild();
System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
I get null but i instantiate the bpel process with a value and i have
- <payload>
- <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
<ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
<ns1:documentName>bvnbvnvn</ns1:documentName>
<ns1:URI>http://www.first.pt</ns1:URI>
<ns1:assignees>gestdoc</ns1:assignees>
<ns1:groups />
</ns1:DocumentReviewProcessRequest>
</payload>
if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
I get a normal erro 'cause this variable don't exist...
Can someone please help me?
Thanks!!

I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps.

Unable to get the response from dynamic partnerlink

Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
Srikanth

Hi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

Unable to get the media from the Endeca Experience manager version 11.0.0

Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.

What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.

AnyConnect - Posture Assessment Failed: Unable to get the available CSD version....

Similar Messages

Maybe you are looking for