Anyconnect session "Assigned IP" not appearing

I have an ASA 5540 running 9.0.3 and a client running Windows 7 and Anyconnect 3.1.04072. The client authenticates to the VPN successfully and an "ipconfig" on the client reveals that it successfully pulls an IP address from the pool on the ASA. However, the user can't get to resources over the VPN and when i look at the database on the ASA, the session is missing it's assigned IP address (see below).
Session Type: AnyConnect
Username : XXX\XXXXXXX Index : 25967
Public IP : 2XX.XXX.XXX.232
Protocol : AnyConnect-Parent
License : AnyConnect Essentials
Encryption : AnyConnect-Parent: (1)none
Hashing : AnyConnect-Parent: (1)none
Bytes Tx : 12340 Bytes Rx : 792
Group Policy : SOITrane Tunnel Group : DefaultWEBVPNGroup
Login Time : 11:22:59 EDT Tue Sep 16 2014
Duration : 0h:15m:15s
Inactivity : 0h:12m:54s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
Any thoughts?

I wish I could help, I have been seeing the same issue. It has been hit or miss when it happens to the users though. I am running 9.1.5 on my ASA and Anyconnect Client 3.1.05182

Similar Messages

Assigned Apps not appearing in Company Portal on iOS

Hi
Before I log this with Intune support, has anyone had the issue where assigned apps are NOT showing up in the Company Portal on iOS devices? Version 2.0.3 of the portal, iOS 8.1.3.
Re-sync makes no difference.
If I change them to required install, I get prompted to install and it works - this is not my preferred scenario as I want user choice to install.
Cheers
Ian

Hi - i'm referring too applications published through the InTune Software Publisher that are made available using 'Available Install'. These are Store apps for MS Office.
So under Manage Deployment , I select All Users as the deployment target, and make the app 'Available Install' not 'Required Install'
Where is this made available, I cant see the apps in the Company Portal available apps.
If I change them to required install, I get prompted to install and it works - this is not my preferred
scenario as I want user choice to install.
Ian

Lock screen wallpaper does not appear in the lock screen

I just reset my iphone 4 running iOS5 and set it up as a new iPhone. Everything appeared fine until I noticed the Lock Screen wallpaper I assigned does not appear after I lock it. The home screen wallpaper does. I hope someone can tell me how to fix this.

Settings --> Wallpaper --> (select whichever image or photo you want to use) --> Set, choose Lock Screen, Home Screen, or Both

Role created in ERM is not appearing in CUP request for assignment-GRC 10.0

Hi,
We are on GRC 10.0 - SP5
We have created a role in ERM and it was succesfully created in backend system. However when we tried to assign the same role using CUP request - the role is not appearing.
1) Do we need to upload roles for CUP in GRC 10.0 (similar to 5.3) to populate. Will the role doesnot automatically appears in GRC database for CUP as it is created through ERM?
2) If the roles are imported in ERM with role owner information, does the same reflects for CUP also for role owner approver assignments?
Thanks and Best Regards,
Srihari.K

Hi Sri,
Is the role status set to "production" ??
Cheers,
Diego.

How to fix The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.

Items assigned using EGO_ITEM_PUB.ASSIGN_ITEM_TO_ORG does not appear in GUI

I used the EGO_ITEM_PUB.ASSIGN_ITEM_TO_ORG API to assign multiple items (one by one) from one organization to another.I had created test items through the inventory responsibility using master item window and then assign them to another organization.
After completion, I checked into the database and the items were assigned to the organization i wanted to. However, these items were not appearing in any of the windows when i searched through GUI (Item information window or item search window) under the new organization that i assigned them too.
I tried changing few values that appeared to be abnormal (E.g: last update time was '-1' probably because i used API and not GUI using my user id and password).
Why are not the items appearing in GUI?Is there a step other than executing the EGO_ITEM_PUB.ASSIGN_ITEM_TO_ORG API correctly that I am missing? Please help.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

TS2529 The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation ser

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?

Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up.

ASA 5510 8.3(2.25) Failover Pair AnyConnect Sessions not Idle-Timing Out

Hi guys,
I have an Active/Standby pair of ASA 5510's running 8.3(2.25) software that are showing AnyConnect sessions running at 10 days +.
The users in question are not connected...
I have configured the profile's policy to idle-timeout after 90 minutes.
Is this a bug?
Kind regards, Ash.

Hi guys,
I have an Active/Standby pair of ASA 5510's running 8.3(2.25) software that are showing AnyConnect sessions running at 10 days +.
The users in question are not connected...
I have configured the profile's policy to idle-timeout after 90 minutes.
Is this a bug?
Kind regards, Ash.

"Assign access control" not appearing under Essbase in shared services

Hi Everyone,
Can anyone point out the reason behind this? This is leading to all sorts of problems. Configuration is as follows:
App Server: Foundation, EAS, Planning, Reporting, Web Analysis, Workspace on Tomcat
DB Server: Essbase and SQL Server
Essbase is on Shared Services mode.
This is actually very urgent. Would be grateful for any help.
Thanks,
Sayantan

This has been posted in the essbase forum > "Assign access control" not appearing under Essbase in shared services
Cheers
John
http://john-goodwin.blogspot.com/

New Role does not appear in home page after assigned to a user

Hi there!
I'm new at SAP Portals.
I've created a role and assigned it to an user, but the corresponding tab does not appear in home page.
I've already changed permitions to a group that is assigned to the user.
I've seen in some posts that the role's property "Entry point" should have value "Yes", but mine is set to "No". Meanwhile, I can't change it. When I open the role and press button "Properties" nothing happens. The only way I can check role's properties is through "Delta Link tracer", but there I can't change them.
Can you help me, make the new tab (corresponding to role) happear in home page menu?
Thanks and best regards,
Vasco Brandã

Hi,
to track down you problem, you click on "properties", but you can't see the properties? They won't get loaded and therefor, you can't edit the property?
What's your portal version + SPS, which browser are you using + version (IE, FF) and how do you access the portal? IP, FQDN? Are you getting any error message in the browser?
What profile is assigned to your user? What kind of roles are you trying to modify? A new one, or a SAP pre-delivered portal role?
br,
Tobias

The "Logout" button does not appear my Sakai sessions. I have to mouse over the blank area to find the link to logout. The Logout button does appear in Safari. Firefox version 10.0. Mac OS 10.7.2

The "Logout" button does not appear my Sakai sessions. I have to mouse over the blank area to find the link to logout. The Logout button does appear in Safari. Firefox version 10.0. Mac OS 10.7.2

To make sure that all required media is in the library contain the project you need to "Consolidate media" see: http://help.apple.com/imovie/mac/10.0/#mov882dee351
You can then copy the library to your laptop with the Finder and open it with the same version of iMovie. The last phrase is important since Apple has made changes in the project format several times even between minor updates of iMovie 10. Earlier versions may not be able to read the library and later versions (not possible in this case) may cause the project to be updated so that it is no longer readable by the desktop version. iMovie on the laptop will not at first find the copied library - you will have either to double click on it or File - Open library - Other and navigate to its location.
Geoff.

Excise group not appearing in excise no range maintainence session

Hi,
We created a new depot plant and new excise group in golden client.
Transported the same in testing client, excise group is appearing in excise group node.
but in excise number range maintenance session SNRO for object j_1irg23d in testing client, transported excise group is not appearing.
If we enter the same and move for number ranges system states " Excise group XX doesnot exist"
I checked for excise group intable J_1IRG23D table , excise group xx is appearing.
Please help in this regard
Raju.

Hi,
You need to have an entry of the Excise Group in the table - J_1INEXCGRP.
Mostly whenever the excise Group is created this Table is supposed to be updated with the excise Group, but in some cases it does not.
For maintaining the entry in this table you need to open the client settings.
Just maintain the entry of the Excise Group in this table and Save it.
Regards,
Jeetendra Kulkarni
Mumbai
India

Sales order number not appears in account assignment tab

Hi,
User raised PO for third party and account assignment category.But ,Sales order number and its item not appear in account assignment tab.
Can anybody help me.
Lucky.

Hi Lucky,
Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
Thanks for your inputs on this issue.
Regards
Rang

EWA Session does not appear

Hi all,
I've installed SolMan 7.0 EHP1 and complete the initial and basic configuration using SOLMAN_SETUP tcode.
Then I connect a satellite system with SMSY tcode and setup the EWA configuration.
Now I want to create a EWA Report manually but when I run the REFRESH_SESSION from SDCCN tcode on satellite system the EarlyWatch Alert for Solution Manager Session does not appear.
Could you please help me?
Thanks in advanced
Moreno

1. Did you setuo EWA in SOLMAN for that satelitte System? DSWP->Select the solution->Operations Setup->Solution Monitoring->Early Watch Alert->Setup Early Watch Alert.
2. If you have done this, then goto DSWP->Select the solution->Operations->Solution Monitoring->Early Watch Alert->Just click on the scheduled EWA. It will tell you why the session data is not collected from satelitte system though you ran REFRESH_SESSION at satelitte system.
OR
3. Check whether EWA is active at solman for that solution(Satelitte System).
DSWP->Settings->Solution Monitoring->Early Watch Alert
4. Check maintenace package and EWA is scheduled after you ran REFRESH_SESSION at satellite system(SDCCN), if so, then select the maintance package->click on details button(right side of the screen). Make sure that "Target RFC Destination" under Target System should be Back RFC of Solution Manager.
Hope this may help you.
Regards
Sanjai

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Anyconnect session "Assigned IP" not appearing

Similar Messages

Maybe you are looking for