AnyConnect SSL Client issue with Mac OS X

Hello this seems to be a very common issue with AnyConnect working on Mac OS X. A lot of random sites talk about this.
I have a Cisco 2801 running IOS 12.4(22)T (ADV ENT SRV) with AnyConnect 2.3 package installed.
From Windows I can connect without any issues.
From a Mac OS X after providing login credentials the AnyConnect log says its connecting... checking for updates... and then disconnects.
If this does work on Mac OS X what is needed (or needs to be configured) to get this to work properly on Mac OS X?
Thank you!

Hello All,
I recently experienced the same problem when my company upgraded to our entire company from the stone age to a VPN system using the Cisco AnyConnect. At first, I had the same problem as described above. Then my IT guy and I got on the phone with Cisco.
Here is the solution that worked for me. First, our IT department had to specifically load a MAC connection file into the VPN firewall to allow access for MacIntosh computers. Then I redownloaded the latest anyconnect files and updated whatever else through the vpn.yourcompany.com site. Finally, from www.citrix.com/download I downloaded (on the RH side under featured downloads) the appropriate Citrix ICA File.
Everything works fine now. I don't know if this will work for you, but it did the trick for us.

Similar Messages

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi

Compatibility issues with Mac OSX Leopard 10.5 and Word 2004 11.6.3 on G5 PowerMac?

Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?

I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
anitabean wrote:
Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
Crossing my fingers and loading Leopard....
Cheers.

Issue with Mac OS 10.8.3 and Anyconnect VPN Client 3.1.02026

Hi all,
I am running Anyconnect VPN Client 3.1.02026 on Mac OS X 10.8.3. I am unable to connect to my corporate network as the connection fails with following error :
The VPN client was unable to successfully verify the IP forwarding table modifications. A VPN connection will not be established.
Can anyone suggest remedies. I am completely stuck. I had an older AnyConnect client and it was working until a few days back when it stopped working. I then upgraded to 3.1.02026.
As suggested in some of the pots on the web, i have disabled the following AirPort, Bonjour, Bluetooth, Adium, restarted after these changes and yet i am seeing this.
My company has corporate license for Cisco AnyConnect VPN.
TIA
kumar

MartyP wrote:
Or is there a problem with both OS's writing stuff to the
~/Home/Library folder that may be incompatible?
Yes, big time. Mail, for sure, has a different file/folder structure, and would not be happy.
Plus, a number of apps (Apple and 3rd-party) are "Sandboxed." That's a security feature, to prevent malware or bad coding from affecting things it shouldn't. Some of their files, including the preferences files, aren't even stored in the same places!
Or to other places I'm not aware of?
Probably. If you have two versions of the same app, they may or may not expect the same data setup.
To have one User folder for both OS's would save a lot of drive space
Not if you use some or all of woodmeister50's suggestions.
But I'm also not sure how I'd use Time machine with such a set up.
Just as you do now. By default, Time Machine backs-up everything (except things like system work files, most caches and logs, trash) for all users and all internal drives & partitions. By default, it excludes external drives.
You can change those defaults, of course, via TM Preferences > Options.
See Time Machine - Frequently Asked Question #32 for details and considerations of multiple drives.
Presently I backup with . . . clones to other HD's
Good. Yes, clones are different. You need multiple "tasks" to back up multiple drives/partitions. But once set up, that shouldn't be a big deal.

AnyConnect SSL-client Certificate AND AAA RADIUS

Hi All,
I'm trying to setup Anyconnect VPN Phone feature. I have the license, and I have been able to get the phone to authenticate / register etc with a username / password.
I want to use the cert on the phone, use the CN as the username and just verify that against my ACS server via RADIUS.... Easier said than done. The ASA is grabbing the Username, but for the life of me, i can't get it to send the username over to the RADIUS server. I have enabled all sorts of aaa and radius debugging and just get no output at all...
Here are some relevant log messages I'm getting:
Starting SSL handshake with client outside:72.91.xx.xx/42501 for TLSv1 session
Certificate was successfully validated. serial number: 5C7DB8EB000000xxxxxx, subject name: cn=CP-7942G-SEP002155551BD7,ou=EVVBU,o=Cisco Systems Inc..
Certificate chain was successfully validated with warning, revocation status was not checked.
Tunnel group search using certificate maps failed for peer certificate: serial number: 5C7DB8EB000000xxxxxx, subject name: cn=CP-7942G-SEP002155551BD7,ou=EVVBU,o=Cisco Systems Inc., issuer_name: cn=Cisco Manufacturing CA,o=Cisco Systems.
Device completed SSL handshake with client outside:72.91.xx.xx/42501
Group SSLClientProfile: Authenticating ssl-client connection from 72.91.14.42 with username, CP-7942G-SEP002155551BD7, from client certificate
Teardown TCP connection 35754 for outside:72.91.xx.xx/42501 to identity:173.227.xxx.xxx/443 duration 0:00:05 bytes 5473 TCP Reset by appliance
Relevant Config:
tunnel-group SSLClientProfile type remote-access
tunnel-group SSLClientProfile general-attributes
authentication-server-group RADIUS
default-group-policy GroupPolicy1
tunnel-group SSLClientProfile webvpn-attributes
authentication aaa certificate
radius-reject-message
pre-fill-username ssl-client
group-alias SSLClientProfile enable
group-url https://URL enable
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
wins-server none
dns-server value <ip1> <ip2>
vpn-tunnel-protocol ssl-client
default-domain value xxxxxxxx
address-pools value VPNPOOL
aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 192.168.102.242
key *****
aaa-server RADIUS (inside) host 192.168.240.242
key *****
ASA version 8.4
What am I doing wrong? It will not send the request to the AAA server, very much frustating me...

PRogress....
I changed the authentication to Certificate ONLY and set authorization to be RADIUS... now it's sending the request to my ACS server. Next question: What's the password that's being sent? Is it blank? I've tried the phone's whole username, tried the MAC and tried just the SEP part. No Dice. Thoughts?

Internal hard drive issue with Mac Pro

I work for two office that share information through a VPN. Each office has one Mac Pro being used as a server for data storage. The Pros have four internal hard drives (1TB each).
Hard drives in the Pro for OFFICE 1 were configured like so:
HD1 - OS/Boot drive
HD2 - Time Machine backup of HD1/DATA1/DATA2
DATA1 - Data storage
DATA2 - Data storage
Three weeks ago: Time Machine could not find HD2 and could not backup. I rebooted the machine and HD2 reappeared. However, after the reboot, DATA1 did not mount. I was unable to find DATA1 in Disk Utility. However, the drive could be accessed by all other Macs on the network. This machine was taken to the local Apple Store and we were told that HD2 was a bad drive and need to be replaced. We opted not to replaced the drive at this time and turned Time Machine backups off. We haven't had any problems with DATA1 since. (NOTE: During the weeks prior, the client machines intermittently lost connection with DATA1 and would have to reconnect)
Last week: OFFICE 2 - Mac Pro hard drives configured the same as OFFICE 1; however, HD2 was not used for TM backups. TM was turned on and set to backup HD1/DATA1/DATA2 to HD2 (exactly like OFFICE 1). The next day, TM could not find HD2 and backups stopped running. I rebooted the machine, HD2 reappeared, but we did not restart the TM backups.
Today: OFFICE 2 client machines have experienced intermittent disconnecting of DATA1.
I wasn't extremely concerned with the situation at OFFICE 1 as these Pros are almost five years old and in constant use. We plan on purchasing an external drive for the TM backups. HOWEVER, with a similar situation now being experienced in OFFICE 2, I am perplexed.
Could both machine be experiencing hard drive failures weeks apart? They were both purchased and installed at the same time.
Is there a known issue with TM and internal drives?
One difference between the two machines: OFFICE 1 is running OS X 10.8.5; OFFICE 2 runs 10.6.8
Any suggestions/help is appreciated. Thanks!

Relying on TimeMachine has some issues, along with only having one, I use at least two swapping TimeMachine so that they rotate AND I clone every drive (volume actually) so I can swap drives if need be, especially useful for t he system but good for any drive.
Power issues in t he buildings?
There are some programs that will scan for and report and./or attempt to reassign a failing sector ("fail" is qualitative, is 10 write failures a fail? then the 9th is not but it is a "weak sector.") Some run in the background.
Mirror can be 2 or 3 ( I prefer 3, that way if one fails I STILL have a mirror array in place) where any failure is not acceptable, AND where the array data is backed up usually - less important when using a three-drive configurations.
How old, when last initialized (zero), and is it showing spare blocks being used? that last is the most indicative of failed drive.
Rare but a bad SATA cable or power (seeing how the cables are tucked away) is only way generally for multiple failures in same drive bay or computer. Note: early on in 2006-7 there were reports of some customers having motherboard and trouble with a drive bay , and t he problems showed up early.
Often though it is NVRAM or SMC related issue trigged by something else, a USB cable or device that is faulty, even a PCIe controller that is the culprit. And replacing cable, keyboard, device, and resetting SMC and NVRAM (often NVRAM needed to be done multiple times, but never keep resetting SMC) - unplugged and when you connect back up, do not install anything other than system, keyboard and mouse and see if that helps.
With a drive, likely the drive in 85% or more, is fine, but the directory is not, or it needs to be erased to rebuild all the system partitions.
1TB is small for TimeMachine. 350% of the amount of data, and always have free space for a full backup set of all the data. T.M. will try and prefers to automatically backup any and everything plugged in and connected, rather than my preference which is ASK FIRST to add a drive to TM backup set, otherwise leave it out. 600GB of data and system would mean 2.5TB drive, maybe 2TB minimum.

SSL communication issue with JDK 1.6.0_19

Hi,
I am facing issue with JDK 1.6.0_19. I have a Java client which communicate with the Server in SSL communication.so, It is able to communicate properly with the JDK <=1.6.0_18 version.But I got handling exception: javax.net.ssl.SSLException: HelloRequest followed by an unexpected handshake message exception when the client is trying to communicate with the server in JDK 1.6.0_19.
We are using mutual authentication.The client and the server both have the signed certificate.The client certificate has to be validated by the server to establish the connection.
I have seen in forum that it is a renegotiation issue.So, if I enable the renegotiation flag by -Dsun.security.ssl.allowUnsafeRenegotiation=true it's working fine.But enabling renegotiation itself is a vulnerability.So, I can't enable renegotiation.
I am using httpclient 4.0 and JSSE in client side and IIS in the server side for this SSL connection.
I am not sure which side client or server initiating the renegotiation?
Please help me out.
I have tried Openssl command from console.
The command is : openssl s_client -connect X.X.X:443 -CAfile "xxxxx" -cert "xxxxxxxx" -key "xxxxxxxxxx" -state -verify 20 here is the output:
Loading 'screen' into random state - done
CONNECTED(00000748)
SSL_connect:before/connect initialization
SSL_connect:SSLv2/v3 write client hello A
SSL_connect:SSLv3 read server hello A
xxxxxxxxxxx.................
verify return:1
xxxxxxxxxxx.................
verify return:1
SSL_connect:SSLv3 read server certificate A
SSL_connect:SSLv3 read server done A
SSL_connect:SSLv3 write client key exchange A
SSL_connect:SSLv3 write change cipher spec A
SSL_connect:SSLv3 write finished A
SSL_connect:SSLv3 flush data
SSL_connect:SSLv3 read finished A
Certificate chain
xxxxxxxxxxx.................
Server certificate
-----BEGIN CERTIFICATE-----
xxxxxxxxxxx.................
-----END CERTIFICATE-----
xxxxxxxxxxx.................
No client certificate CA names sent
SSL handshake has read 1839 bytes and written 392 bytes
New, TLSv1/SSLv3, Cipher is RC4-MD5
Server public key is 1024 bit
Secure Renegotiation IS NOT supported
Compression: NONE
Expansion: NONE
SSL-Session:
    Protocol : TLSv1
    Cipher    : RC4-MD5
    Session-ID: xxxxxxxxxxx
    Session-ID-ctx:
    Master-Key: xxxxxxxxxxx
    Key-Arg   : None
    PSK identity: None
    PSK identity hint: None
    Start Time: 1275564626
    Timeout   : 300 (sec)
    Verify return code: 0 (ok)
read:errno=10054If you see the console output you can see that two statement is missing those are :
SSL_connect:SSLv3 read server certificate request A
SSL_connect:SSLv3 write client certificate ASo, I like to know if this is any clue which is asking for renegotiation.

Thank you for your response.
Yes I have set the particular proerty SSLAlwaysNegoClientCert to True and it is able to establish the ssl conneciton without initiating renegotiation from IIS server side.The property has to be set the metabase.xml file.
Thank you very much once again.
Edited by: arpitak on Jun 23, 2010 2:10 AM

Issues with mac pro 2014 and Adobe CC

Having major issues with my New Mac Pro since installing 10.9.3. The issues are with render in Adobe CC products and glitches on displays.
Model Name:          Mac Pro
Model Identifier:          MacPro6,1
Processor Name:          12-Core Intel Xeon E5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache:          30 MB
Memory:          64 GB
Boot ROM Version:          MP61.0116.B05
SMC Version (system):          2.20f18
Illumination Version:          1.4a6

Well known issue and no solution yet. There is nothing wrong with your computer. http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compati bility-with-critical-pro-apps/

PSE 10 Install issue with Mac OS 10.6.8

Hi,
I'm having trouble installing a copy of PSE 10 on a Macbook Pro (Intel 2.4 GHz) with Mac OS X version 10.6.8. I've tried downloading the software twice and get errors on both copies. Here is the latest error:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 23 error(s), 3 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirJZhvRqio/Assets1/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" to "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" Error 0(Seq 1343)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1343)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1332)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL"(Seq 1152)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1152)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required"(Seq 1098)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1098)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
The second downloaded version made it farther than the first on the installation. It makes it to the installation of PSE 10 and then jumps from 60% installed to 98% and shows the above message. This is getting really frustrating given that it takes me several hours to download a copy of this software.
Any advice would be greatly appreciated.

Hi Barbara,
Thanks for the advice. Unfortunately, it didn't work. I deleted (and emptied the trash) of the Adobe folder in the Hard drive>library>application support folders, uninstalled the partial install of PSE 10 using Adobe's uninstall, turned off the antivirus software, and tried installing from a new administrative account. Here is the error code from this most recent attempt.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 23 error(s), 1 warning(s)
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirSAstoywp/Assets1/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" to "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" Error 0(Seq 1343)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1343)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1332)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required/PDFL"(Seq 1152)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1152)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Required"(Seq 1098)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1098)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
This computer has had some previous Photoshop versions migrated to it over the years (Photoshop 4.0 for OS 9, and Photoshop 7.0). Photoshop 7.0 stopped working after I upgraded the OS from Tiger to Snow Leopard, and I no longer have the disks or serial number so that is why I'm trying install PSE 10. Could these old versions (which I tried to delete, but did not have a specific uninstall version for) be a source of this issue? If so, is there a way to make sure they're all gone?
Thanks

Permission/Privilege Issues With Mac OS Lion

I created a new user account after I installed Lion, transferred my files over, and now I'm having issues with my account. I don't know if permissions and privilages are responsible for the issues, but seemingly so. I also have to mention that when I was changing over user accounts, I ended up wanting to change the short names on both my old and new accounts, so I used the root user to do so. Here are some problems I've been experiencing:
- When I open system preferences, it always opens up to the General pane. No matter what.
- After restarting, certain windows that I had open at a certain time keep opening up, no matter if I closed them out and had completely new windows open.
- Preferences in certain applications will not save. Audacity opens up each time I start my computer, there is a tick box for show this screen when starting Audacity, I untick it, but it still opens up each time. Photoshop gives me a message that my preferences can't be saved because I don't have the right privilages. Textedit keeps opening up to a certain file I had open a couple of days ago, and when I try to save a new document, it gives me an error. Safari only remembers history from a couple of days ago. And when I try to reset Safari, and reopen it, the same old history is displayed.
- When I try to move files to my desktop or to the Trash, I have to authenticate it.
I tried Repairing the disk, repairing permissions, inserting my Mac os leopard disk and doing the same, and using the Reset Password utility on the Mac os installation disk to repair permissions to my home folder, but nothing is working.

Hi everyone, I have found a solution. This worked for me:
1) Create a new user account. Make sure it has a desireable name, otherwise you're going to want to change it later, and that will cause permission issues. (check if preferences are saving in this temporary new account, if not, I can't help you.)
2) Transfer all the files you want to keep by putting them in the SHARED folder.
3) Change permissions to the folders and files in your shared folder by right clicking and clicking on GET INFO. Then go to the very bottom of the popup menu and unlock the picture of the lock. Next change permissions so that your new account will have permission to view the files. You might have to add your new account to the list by pressing the plus button, or simply allow staff the read and right, or just let everyone read and right. Next click on the gear menu (the one with the little gear on it.) and click on APPLY TO ENCLOSED ITEMS.
4) Go to your new user account and take the things in the shared folder and put them where you had them in your older account.
Now you have a new user with the files you want, the permissions right, and preferences will save!
I really really really hope this works for you. I know how extremely frustrating it was. It worked for me, and I am so relieved now.

Display Issues with Mac Pro 1.1 HELP!!

I have a Mac Pro 1,1:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version: 1.7f10
Running OSX 10.6.3
I'm on my second graphics card [ATI Radeon HD 2600] after having issues with the original [NVIDIA GeForce 7300 GT]. The issue with the NVIDIA card was that, at times, it would display digital artifacts, glitches, distortion and freeze up the system forcing me to have to do a hard shut down. I found many reports of similar issues with that card and the Mac Pro 1,1's.
When I replaced it with the ATI the problem went away for 6 months and now IT"S BACK.
So, are there any particular graphics cards that work OK with the Mac Pro 1,1? I don't want to waste my money again only to encounter the same issue!
I'm also contemplating getting a new Mac all together.
Please advise, I've read many threads with this issue and they all seem to point to the same deal: replace the card. I can't afford to keep replacing graphics cards.
Saki

The 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
You're running 10.6.3, might want to update your profile itself.

SSL certificate issue with WLS 10.3

Hi All,
I am facing this issue with my WLS cluster.
<21-Apr-2010 10:42:00 o'clock BST> <Warning> <Security> <BEA-090482> <BAD_CERTIF
ICATE alert was received from system.core.com - 10.15.135.30.
Check the peer to determine why it rejected the certificate chain (trusted CA co
nfiguration, hostname verification). SSL debug tracing may be required to determ
ine the exact reason the certificate was rejected.>
<21-Apr-2010 10:42:00> <Warning> <Uncaught exception in server handler: javax.ne
t.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was received from
system.core.com - 10.15.135.30. Check the peer to determine wh
y it rejected the certificate chain (trusted CA configuration, hostname verifica
tion). SSL debug tracing may be required to determine the exact reason the certi
ficate was rejected.>
Please suggest. I have also tried the below settings.
Node Manager:
-Dweblogic.nodemanager.sslHostNameVerificationEnabled=false
Admin Server:
-Dweblogic.security.SSL.ignoreHostnameVerification=true
Many thanks in advance.

Hi Sandip,
I am facing this issue right after when I have configured the listen address to my system IP in Machine(NodeManager), earlier it was "localhost".
Also I have tried to generate the certificates e.g.
C:\bea\wlserver_10.3\server\bin>java utils.CertGen -cn system.core.com -keyfilepass DemoIdentityPassPhr
ase -certfile mycertificate -keyfile .keystore
Generating a certificate with common name system.core.com and key strength 1024
issued by CA with certificate from C:\bea\WLSERV~1.3\server\lib\CertGenCA.der file and key from C:\bea\WLSERV~1.3\server
\lib\CertGenCAKey.der file
C:\bea\wlserver_10.3\server\bin>java utils.ImportPrivateKey -keystore DemoIdentity.jks -storepass DemoIdentityKeyStorePa
ssPhrase -keyfile .keystore.pem -keyfilepass DemoIdentityPassPhrase -certfile mycertificate.pem -alias demoidentity
No password was specified for the key entry
Key file password will be used
Imported private key .keystore.pem and certificate mycertificate.pem
into a new keystore DemoIdentity.jks of type jks under alias demoidentity
Tried the above but not wokring. Please advise.
Edited by: R Vashi on 21-Apr-2010 03:38

Compatibility issues with mac OS - Lightroom 4 works where CS5 won't

Hope someone can shed some light on this issue...
I tried installing Lightroom 4 on Mac OS 10.6.1 (which is currently running CS5 without issues) but the specs call for OS 10.6.8 or later (10.7). When I updated my OS to 10.6.8, none of my CS5 apps work! They encounter launch errors - InDesign, Illustrator, Dreamweaver... only Photoshop seems to work. So, I reverted back to OS 10.6.1 and all the programs function. Is Adobe working on a solution to fix this issue? I see with the forums that several other users have noted the same issue with CS5 not working in the OS 10.6.8 environment. I don't want to upgrade my OS just to have Lightroom function, but none the CS apps. I was thinking of partitioning my HD to load both OS, but that shouldn't be the workaround. I am very disappointed that I've purchased Lightroom 4 and now am unable to use it due to compatibility issues with the OS with the rest of CS5.0.

Pixelzboy are you receiving any specific errors when launching your applications under 10.6.8? CS5 should work just fine with 10.6.8 as well as 10.7.3. You may also want to post to the product specific forums with your launch errors as the users in those forums will be more familiar with troubleshooting steps specific to those products.

E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
Regards,
Daniel

Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L.

Sudden banding issue with Mac and new Canon printer, already called tech

Good morning fellow Elementites.
I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue? None of the suggestions in other threads from the past seem appropriate enough.
Eager to hear,
Regards.

I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling. Maybe something glaring will be spotted before I start changing things.
I opened an image in PSE 12.
I chose from the PSE menu at the top of the monitor, FILE >PRINT
A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
I then select MORE OPTIONS button at bottom of window.
Another window opens.
There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
I select COLOR MANAGEMENT.
COLOR HANDLING is set to PRINTER MANAGES COLOR.
IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
(There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog. I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
I then click OK and the box goes away.
I then click the PAGE SET UP button.
A window titled PRINT opens.
The Printer selection box says CANON PRO=100 series.
The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos. It is the Presets box.
I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window. But I don't want that so I always look to see if there is something I should choose that applies. I don't know what they mean by DEFAULT SETTINGS in this case. LAST USED SETTINGS would be ok if that was what I wanted each time I printed. FAST and FINE on Plain Paper? I have been assuming they mean plain copy paper so I don't choose that. SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings. And the SHOW PRESETS does me no good becuase you can't change anything in there.
PAPER SIZE, not an issue at the moment.
LAYOUT button is my next stop, by now I am exhausted
I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method. (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
PAPER HANDLING & COVER PAGE, N/A at this time.
QUALITY & MEDIUM. I choose my paper type, paper source, print quality which for my photos I select HIGH. I don't touch COLOR OPTIONS because that is scary looking. And BORDER and MARGIN I have no issue with.
I then hit SAVE and the window closes.
Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
Phew. So, can anyone tell me if they see anything wrong here, PLEASE.
Regards,
P.

AnyConnect SSL Client issue with Mac OS X

Similar Messages

Maybe you are looking for