Anyconnect stops internet from working

I am using anyconnect v3.1.01065 and when I connect my computer can no longer access internet. As soon as I disconnect the internet it accessible. I think it is related to dns servers not resolving the requests. Any ideas?

Well because by default AnyConnect is a full-tunnel.
Since you got AnyConnect working, so Ill assume that you have the NAT ACLs correctly configured
Anyway to cover that:
In you policy group <GROUP> configuration add the subnets you are accessing in your infrastructure.
#webvpn context REMCONTEXT
#aaa authentication list REMUSER
#gateway REMGATE
#max-users 20
#virtual-template 1
#inservice
#policy group REMGROUP
#functions svc-enabled
#functions svc-required
#svc address-pool REMPOOL netmask 255.255.255.0
**SPLIT-TUNNEL
#svc split include 172.30.10.0 255.255.255.0 -repeat this as necessary
Repeat the svc split include command for all the subnets inside your network that you allowed.

Similar Messages

As soon as I open iTunes a message pops up to say a problem has stopped it from working and I have to close it. Any solutions?

As soon as I open iTunes a message pops up to say a problem has stopped it from working and I have to close it. Any solutions?

Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

Freeze accounts periods stops MRP from working?

Hi
We have been doing some work in Accounts and froze the accounting periods January - September, but it appears this action stopped MRP from working.
Is this behaviour correct by design, or is it possible there is an as yet undefined issue?
Thanks

Hi,
Did you received error message like Period is locked for new data [Message 131-107]?
If yes, then the system behavior is correct.
Thanks & Regards,
Nagarajan

This content requires hdcp for playback. so I paid $100 for it and now they stop it from working?

I have an atv 2, my tv uses componet, I have used it to rent and watch movies on it for a year at least but now it says this content requires hdcp for playback. so I paid $100 for it and now they stop it from working?
I also have the first atv, I get the same message

lol, I had to go look at the back of that, I've been using it so long with componet. I started getting the hdcp message a few months ago on it. been using it for years with componet now I cant. what I meNt on the AT2 is that when I bought it, I was able to use it, rent moves, etc. since I got it using an adaptor because of my tv. It just recently was rendered incapable along with the componet output on the AT1.
My tv is a 65" Hitachi rear projection, with no hdmi. It's old, but still has a great picture

IOS 6 issues still cannot connect to Internet from work access. Says browser does not support HTML redirect

My iPod touch cannot access wifi from work . I get message browser does not support HTML redirect . I've tried alot of suggestions nothing seems to work . Can anyone help me out with this . I also have been getting booted alot while trying to check out my App Store

What does your work IT staff say?
It might be related to this previous discussion.
https://discussions.apple.com/thread/4359363?tstart=0

Itunes match stops Itunes from working on a windows 7 64 bit PC

Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
Dell Inc. Studio XPS 9100
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00DCBC201208EEA8
Current user is not an administrator.
The current local date and time is 2014-01-09 08:19:31.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD RADEON HD 6670
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: ce06aa4a18a321df2eefb3c779bf1239
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:           {F0B5354E-8EA6-45CE-B27E-B80027B7F62B}
Description:                 DW1525 (802.11n) WLAN PCIe Card
IP Address:                 0.0.0.0
Subnet Mask:             0.0.0.0
Default Gateway:       0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:         Wed Dec 31 18:00:00 1969
Lease Expires:           Wed Dec 31 18:00:00 1969
DNS Servers:
Adapter Name:           {7CA2450F-3522-4C73-B0C8-FF6853F09CF8}
Description:                 Realtek PCIe GBE Family Controller
IP Address:                 192.168.1.100
Subnet Mask:             255.255.255.0
Default Gateway:       192.168.1.1
DHCP Enabled:          Yes
DHCP Server:             192.168.1.1
Lease Obtained:         Wed Jan 08 23:57:05 2014
Lease Expires:           Thu Jan 09 23:57:05 2014
DNS Servers:              192.168.1.1
                                        75.75.75.75
                                        75.75.76.76
Active Connection:    LAN Connection
Connected:                  Yes
Online:                          Yes
Using Modem:            No
Using LAN:                  Yes
Using Proxy:               No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-01-09 08:17:30.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (3.1.1.0),
UpperFilters: GEARAspiWDM (2.2.3.0),
D: PLDS DVDRWBD DH-12E3S, Rev MD11
Drive is empty.
Error Correction is turned on for importing audio CDs.
**** Device Connectivity Tests ****
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
NEC Electronics USB 3.0 Host Controller. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A34. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A35. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A36. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A37. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A38. Device is working properly.
Intel(R) ICH10 Family USB Universal Host Controller - 3A39. Device is working properly.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A. Device is working properly.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (3rd generation) running firmware version 5.1.1
Serial Number:            1B004BB66K2
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

@Merel, I find it amusing that people have hundreds of blocked senders. I have been using internet mail since late 1980s. I have been actively using some of my mail accounts since before the Millennium. I have no blocked senders.
I used to have blocked senders in MSN messenger and Yahoo messenger as it was the only SPAM control option available, but I have Zero blocked senders in my mail client. I certainly get loads of spam in my Yahoo account, it is something Yahoo appear to be incapable of managing. I get very very little in my other mail accounts, so other providers can mange it.
Thunderbird does an excellent job of managing my spam with only a few each day making it to my inbox.
You appear to think transferring this list from client to client is important. I would really like you to tell me why! Then I would love an explanation why you think syncing of such list has merit.
Most people with lots of blocked senders appear to think a blocklist is a SPAM management tool. It is not.
Either they are using blocked senders for SPAM control, something that is simply not appropriate as it is a slow process. To place each mail in a list and check it against 500 email addresses you don't like simply bogs down the receipt of mail.
Or they are and a particularly unlikable person that just

Upgrade to iOS 6.1.3 for iPad stopped cable from working

Hey guys, not too long ago I finally decided to upgrade to ios 6.1.3., because a lot of the apps I wanted needed it. After updating it, my cable to connect to the tv (30 pin male to hdmi female cord from Apple store) stopped working, displaying the message 'This accessory is not support by the iPad'. And the T.V. screen remains black. Has anyone else experienced this and/or solved this issue? Can it be solved at all? Because it's a real **** off, especially since I didn't want to upgrade to ios 6 in the first place. My iPad literally just lost half of its usefulness.

That's not possible on a device other than an iPhone 3GS.
(94512)

/*   */ is a remark? Why deleting it stops query from working?

Dear All,
I recently got the SQL below from one expert and it worked perfecly.
I am now wondering why he sent me this line in green?
/*Select 1 from jdt1 t where t.duedate*/
When I removed this line so that the code at the beginning now reads:
            Declare @d datetime
            set @d = [%1]
the query stops working. Error Msg "Must specify table to select from'.
What is happening here?
I thought   /*   */   means remarks, which can be deleted without effect.
It now seems they are an essential part of the query.
Could you explain the meaning of the command, so that I can use it when building other queries?
- What does 'Select 1' mean and what is its effect?
- Why do we have to put this command to make query work?
- Why do you put it between /*   */?
Thanks
Leon Lai
My previous thread is here:
AR AGEING - Query works perfectly; stops working when changed into Subquery
Declare @d datetime
set @d
/*Select 1 from jdt1 t where t.duedate*/=[%1]
select * from
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
     CASE WHEN T0.TransType=13 THEN 'Invoice'
          WHEN T0.TransType=14 THEN 'Credit Note'
          WHEN T0.TransType=30 THEN 'Journal'
          WHEN T0.TransType=24 THEN 'Receipt'
          END AS 'Document Type',
     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)<=-1),0) 'Future'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE T1.CardType = 'C'
) sub

HI Leonlai
Sorry for my english...I try explain you how work it
This variables
'[%0]' - '[%1]' Etc...
Are from SAP. If you insert this variables in SQL management studio (for example) doesn't work
You must declare variables allowed in SQL, using the @, after insert variables of SAP into variables to SQL.
DECLARE @DATES INT, @BEGIN DATETIME, @END DATETIME
SET @DATES = (SELECT TOP 1 A.DocEntry FROM dbo.OINV A WHERE A.DocDate >= '[%0]' AND A.DocDate <= '[%1]') /*This variable is used for called SAP varibles*/
SET @BEGIN = '[%0]' /*Here Insert SAP variables into SQL variables*/
SET @END = '[%1]'
NOW WRITE your query.
Sometimes when uses variables of SAP into UDF, doesn't work. This is a method for replace it.
Regards

Mac: Graphic Update of Snow Leopard (08/19/10) stopped LR3 from working

I wonder if I'm the only one who has a problem with the latest Apple Update named "Graphic Update 1.0 for Snow Leopard" from last night. After I installed the update on my iMac 27" with quad core i5, 8Gb RAM I accidently used LR 3 RC 3.2 when I recognized that the brushes and all other editing tools where really slow. Even after clicking the brush it took sometimes up to 15 sec. until the tool got selected. Using the brush was slow and without any effect on working either.
I recognized that I was usign the RC 3.2 release which I stopped working with as I have had several issues on that release before with long loading times of photos to edit. So I switched back to the normal release 3.0 which was working OK for me before. But now I have the same issues on the official 3.0 release. Even 3.0 is now very, very stringy and tools aren't working, too. Using the loupe, which shows the magnification immediatly takes now 15 sec. to show the magnification and some more sec. until it is sharp. Switching to next photo takes around 25 sec. which was done in around 3 sec. before.
Now idea what happend, but I think I have to reinstall the OS and get the latest data from my TM.

Bert Nase wrote:
thanks exploded view, you're right, I should try it before. It was so obvious that only the update could have been the matter....
If so normally I expected more people having that problem.
Bert,
Was this specific to the iMac? I just checked for updates on my Macbook Pro and nothing came up about a Graphic update. I went through the process of backing off an update (10.6.4 back to 10.6.3). It wasn't exactly pretty, but not impossible. You may have to do some reinstalls afterward if you find you need to choose that route. In my case I reinstalled Snow Leopard from the DVD first, preserving current user settings and then reinstalled 10.6.3 from a download. A few hours effort, but was back in business, so it is doable.
Jay S.

Firefox extremely slow to load, stops Keyboard from working despite resetting, uninstal and downloading same problems persist

Firefox takes forever to load. When trying to fill in a form on a Web Page the Keyboard wont work and I have to close Firefox and start over. It stops for no reason and page gets s white haze over it. I have reloaded Foxfire. Uninstalled it and downloaded the latest version but it continues. Any clues Thanks Haydn

Another update:
I just tried a different router, an older wireless version of the same router and when I first plugged it in and restarted my computer the internet seemed to work normally again, under 5 second page loads (which is still slower than I'm used to getting, but it was a major improvent).
Then I checked different slots in the router to see if my IP address was changing and it was still remaining on the same IP regardless of which slot I put it in. Do I have to restart my computer everytime I change slots? Either way the internet seemed to be working fine again.
Then I switched back to the other cord that was producing the problems and the speed slowed down again, but it was still loading pages within 10-20 seconds, leading one to believe it was indead the cord.
However, a few minutes into browsing around the web the speed seems to be getting progessively slower. I quit Safari a few times and restarted and the pages would now flash up with no delays, click one or two links with the same results. Then with the 4th or 5th new page the speed slows, and has been slowing to a dead hault again....
I am out of ideas, seemingly a different cord and different router helped things, but only at first. I don't think I can rule out the cord and router as not being problems, but I don't think they are the only problem either.
It must be something to do with the IP addresses, as I am still getting the same address regardless of which router port I put it in. But, I've tried resetting the routers and going into their configurations and resetting them to system defaults, all with no luck.
You would think my computer is the problem, as my roommates computer hasn't had any problems, however everything else on my computer is working perfectly, I've not noticed any other problems and I've tried setting and resetting every network configuration option I can think of and that still doesn't fix the problem.
Maybe the ethernet port on my computer is busted?

Quicktime will not install on my PC - also stopping iTunes from working

Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
James

Says windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

Preloader stops buttons from working?!

Hi,
I made a flash file with buttons that go here and there and everything was fine
except it takes a while to load so i added a preloader and suddenly the compiler
is throwing the following error:
Error #1009: Cannot access a property or method of a null object reference.
... and the buttons have ceased to function.
Here is my code:
preloader:
import flash.events.ProgressEvent;
function update(e:ProgressEvent):void
var percent:Number = Math.floor( (e.bytesLoaded*100)/e.bytesTotal );
if(preloaderMC is MovieClip){
preloaderMC.gotoAndStop(percent);
if(percent == 100){
play();
loaderInfo.addEventListener(ProgressEvent.PROGRESS, update);
// Extra test for IE
var percent:Number = Math.floor( (this.loaderInfo.bytesLoaded*100)/this.loaderInfo.bytesTotal );
if(percent == 100){
nextFrame();
stop();
scene 1:
stop();
import flash.events.MouseEvent;
//---Hair Button---\\
hair_btn.addEventListener(MouseEvent.CLICK, hairClick);
function hairClick(event:MouseEvent):void{
    gotoAndStop("4");
//---Home Button---\\
home_btn.addEventListener(MouseEvent.CLICK, homeClick);
function homeClick(event:MouseEvent):void{
    gotoAndStop("1");
//---Contact Button---\\
weddings_btn.addEventListener(MouseEvent.CLICK, weddingsClick);
function weddingsClick(event:MouseEvent):void{
    gotoAndStop("3");
//---Products Button---\\
products_btn.addEventListener(MouseEvent.CLICK, productsClick);
function productsClick(event:MouseEvent):void{
    gotoAndStop("2");
//---Gallery Button---\\
gallery_btn.addEventListener(MouseEvent.CLICK, galleryClick);
function galleryClick(event:MouseEvent):void{
    gotoAndStop("5");
//---Contact Button---\\
contact_btn.addEventListener(MouseEvent.CLICK, contactClick);
function contactClick(event:MouseEvent):void{
    gotoAndStop("6");
Please help me sort this out!
Thanks

If you are getting a 1009 error, the file will not work, so the buttons might not be the problem.
The 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is not in the display list
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved.

Ipod stops itunes from working

i am opperating itunes on vista. every time i connectr my new ipod and it starts synching - 1 min or less later itunes stops working and the program closes. what am i doing wrong here - i havent even got any music onto my ipod yet!!

Are you using 64-bit Vista?

C309g causes router to stop internet from router

I bought a c309 and connected wirelessly to a Netgear N-300 router (Comcast modem), I am able to print from my laptop wirelessly but after a few minutes i find none of the computers in the house can receive internet (though strangely my son's computer can still get Slacker, but not internet explorer). There is no problem with the modem as I do get internet if I connect directly to the modem. i changed the IP on the printer manually to make sure it is not the same as the primary server, but still I get the same issue. Appreciate any advice.
This question was solved.
View Solution.

First, update firmware for your router. A few versions of Netgear N routers had firmware that did not play nice with HP wireless printers.
Next, Setting a static IP in this way has fixed this issue with others':
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. Enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Installing iTunes updates stops iTunes from working in Windows 8.1

Last year after installing Windows 8.1 I had problems with iTunes ( couldn't burn to disc and could not uninstall after being advised by Apple Support that uninstalling was the solution), after assistance from the Windows community my problem was solved. I installed iTunes 12.1, I believe it was.
Then in early January 2015 I received an update notification and installed it but again started getting error messages and could not run iTunes, error was -
"ITunes.exe - entry Point not found"
The procedure entry point "ADadPolicyEngine_DidEnterStation" Could not be located in the dynamic link library C:\ProgramFiles(x86)\iTunes\iTunes.dll.
Then the message
ITunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
Part of last years solution was the correct procedure to uninstall iTunes (remove all Apple programs) this I followed again and reinstalled iTunes. It again worked correctly until 30.1.15. I opened iTunes and was told there was a newer version available which I installed which it completed ok but then it checked for any other updates and foolishly I installed it and got the error message -
GNSDK_MANAGER_DLL. is missing from your computer reinstall
After clicking ok I get the further message
ITunes was not installed correctly, reinstall
Error 7 (Windows error 126)
Whilst I know how to uninstall and reinstall it is a bit of a pain to have to go through quite a long procedure to correct this problem. As this seems to be an ongoing problem does anyone know a solution ?
I believe the suggested update is the same (12.1) that I install from the iTunes site, so why does it tell me to update I ask .
It would appear that this problem relates to the update from iTunes and not Windows
Obviously not installing updates is an option but not the answer.
Any advice will be appreciated.
Thanks.

i've found something http://download.lenovo.com/lenovo/content/windows8-1/upgrade/ideapad/index_en.ht ml
1. Model compatibility
- Ideapad can only support the current preloaded hardware and software configuration. Therefore, depending on a specific configuration, it might not be recommended to upgrade your computer. That is because some hardware issues cannot be resolved currently.
It is not recommended to upgrade the following models to Windows® 8.1 because some VGA related issues cannot be solved by the vendor, currently.
U310, U410, U510, U410 Touch, U310 Touch;
Z500 Touch, Z500, Z400, Z400 Touch, Z380, Z480, Z580, Z485, Z585;
S300, S400, S400u, S400 Touch, S405, S206, G485, G585, N480
I should have read this before updating lol .... i hate my self right now lol

Anyconnect stops internet from working

Similar Messages

Maybe you are looking for