Anyconnect: unable to connect to host by hostname through VPN

VPN AnyConnect is connected successfull. DNS-lookup (for private and public hosts) is successfull. Ping hosts by IP is successfull.
Problem:
Ping or connect private hosts by hostname is failed (but sometimes works). When I try to connect VPN using other ISP, the problem is solved.
In what reason?! There are ideas?
AnyConnect 3.1.00495
ASA5510, Version 8.4(4)1

Try using fully qualified domain name.
Sent from Cisco Technical Support iPad App

Similar Messages

VMWare Multi-Hypervisor Manager - Unable to connect to host

I have installed a VMWare Multi-Hypervisor into a test environment running vCentre 5.5. However, when am trying to add Microsoft Hyper-V, it says "Unable to connect to Host".
Winrm are enabled on the Hyper-V host. Also, tried to manually add its IP on TrustedHosts in Winrm. Still no go. Can somebody please provide some directions.

Hi,
Hyper-V 2012 R2 is not supported by Multi Hypervisor Manager, hence your issue with adding the host.
You can refer to the Release Notes for further information.
HTH,

I got a new iPhone 5s and I am unable to connect to my home wifi (through Comcast/Xfinity). I was able to with my 4s but not with my new 5s.

I got a new iPhone 5s and I am unable to connect to my home wifi (through Comcast/Xfinity) network. I was able to with my 4s with no problems but with my new 5s, I just get that a message that says "Unable to connect to network [network name]" Thoughts on how to connect to the wifi network? My laptop is connected and using the wifi just fine.

I see the following instruction:
Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
However when I get there I am offered a screen which states "Enter Passcode", and have no clue as to what this should be given I never had to set this in the first place.
It expects 4 digit code, so any ideas?

Unable to connect to host on port 4241

HI SAPers,
I have started the gui, now that I am trying to connect to server I am getting the following error:
Error while connecting to communication partner - see preceeding messages. Could not connect to host lxxxxxxx on port 4241. java.net.ConnectException: Connection refused java.net.ConnectException: Connection refused
Can any one shed some light on this issue?
Regards

Hello All,
Even this question is too old , I am replying this , Because , I am also faced this error and corrected this.
While starting the EHPInstaller , the port is 4241 is listened for the GUI and if the Installation is stopped due to some error and while restarting the GUI we are facing this " Unable to Connect host on Port 4241 "
The answer is ,
In windows , Restarting the server will free the already allocated post to this application .
regards
Vagesan

Unable to connect to AE 802.11n through airport utility -despite resetting

Hi all,
I do realize that there are a number of threads adressing what seems to be my problem, but none of the solutions have worked for me.
I have a 2 year old AE 802.11n that has given me flawless wireless network for a long time now. I have for some time been unable to connect to it and change settings through the Airport utility, for example I was unable to update to the 7.4.1 firmware, so I am (was) running 7.3.2.
Today I wanted to setup a external hard drive connected to the aiport, so I needed the Airport utiltiy. After numerous tries, including a direct connection through an ethernet cable, I was still unable to connect. I was getting the infamous 'Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6728)' error message, despite being able to detect the base fine.
It seemed that resetting the airport had helped a lot of other people, but Alas!! I used soft reset, hard reset and factory reset (presseing the reset button while plugging in the power), and still no luck. The only change is that now my network is no longer working (not surprising), and the base name has changed to factory default. What puzzles me is that Aiport utility states that the base is running the 7.3.2 firmware, while I am certain that it came with version 5.something as factory default. I have just left it without power for a few hours, and still the same.
So, how do I connect to my beloved AE again?
Thanks!
Oh, and I have the same problem on my 3 year old iMac and my brand new MacBook Pro....
Nikolaj 'getting desperate' HTP

I found a workaround:
I removed my new (5.4.1) version of Airport utility, and re installed 5.3.2 (downloaded here: http://www.apple.com/downloads/macosx/apple/application_updates/airportutility53 2forleopard.html)
I could then access the Base, setup my AirDisk, update the firmware, and AFTER the firmware update, reinstall Airport utility 5.4.1. It seems that everything is working now.

Gateway Unable to connect to host

Hi
I'm having some problems with my gateway, I installed a verisign demo certificate a while ago (the certificate has expired already), it worked well but then started sending errors.
This is the error I get while trying to connect to the gateway:
3/9/05 9:15:54 AM CST: Thread[Thread-13,5,main]
ERROR: GWLogManager: Unable to get user ID -> java.lang.NullPointerException
3/9/05 9:15:54 AM CST: Thread[Thread-13,5,main]
ERROR: GWLogManager: Unable to get user ID -> java.lang.NullPointerException
3/9/05 9:15:55 AM CST: Thread[Thread-13,5,main]
ERROR: GWLogManager: Unable to get user ID -> java.lang.NullPointerException
3/9/05 9:15:55 AM CST: Thread[Thread-13,5,main]
ERROR: GWLogManager: Unable to get user ID -> java.lang.NullPointerException
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: ServerCertApprovalCallback: reason -8181
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: ServerCertApprovalCallback: reason -8162
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: ServerCertApprovalCallback: reason -8156
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: ServerCertApprovalCallback: reason -8172
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: HTTPSRetriever: ErrorRetrieve GET /http://tlp21901.mx.americas.intranet/amserver/UI/Login?gw=portalqa.mx.americas.intranet&org=dc%3Dmx%2Cdc%3Damericas%2Cdc%3Dintranet HTTP/1.0
Host: tlp21901.mx.americas.intranet:10443
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-powerpoint, application/vnd.ms-excel, application/msword, application/x-shockwave-flash, */*
Accept-Language: es-mx
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
Connection: close
PS-Netlet: enabled=true; encryption=plain
PS-GW-URL: http://portalqa.mx.americas.intranet/
PS-GW-Rewriting-URL: http://portalqa.mx.americas.intranet/
PS-GW-PDC: false
org.mozilla.jss.ssl.SSLSocketException: Failed to write to socket: (-8157) Certificate extension not found.
at org.mozilla.jss.ssl.SSLSocket.socketWrite(Native Method)
at org.mozilla.jss.ssl.SSLSocket.write(SSLSocket.java:650)
at org.mozilla.jss.ssl.SSLOutputStream.write(SSLOutputStream.java:53)
at org.mozilla.jss.ssl.SSLOutputStream.write(SSLOutputStream.java:49)
at com.sun.portal.rproxy.connectionhandler.HTTPSRetriever.ForceSSLHandshake(Unknown Source)
at com.sun.portal.rproxy.connectionhandler.HTTPSRetriever.getResponse(Unknown Source)
at com.sun.portal.rproxy.connectionhandler.Session.retrieveResponse(Unknown Source)
at com.sun.portal.rproxy.connectionhandler.Session.processProtocolRequest(Unknown Source)
at com.sun.portal.rproxy.connectionhandler.Session.processNextRequest(Unknown Source)
at com.sun.portal.rproxy.server.RequestProcessor$1.run(Unknown Source)
at com.sun.portal.util.ThreadPoolThread.run(Unknown Source)
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: GWLogManager: Unable to get user ID -> java.lang.NullPointerException
3/9/05 9:16:04 AM CST: Thread[Thread-13,5,main]
ERROR: GWLogManager: Unable to get user ID -> java.lang.NullPointerException
Does anyone know what could be happening??
thank you very much

My pc crashes any time, once or twice a day. For a long time I thought my pc had hardware problems or a virus, but shortley I noticed the error messages.
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x046b7597, pid=3004, tid=2980
# Java VM: Java HotSpot(TM) Client VM (1.5.0_04-b05 mixed mode, sharing)
# Problematic frame:
[error occurred during error reporting, step 60, id 0xc0000005]
--------------- T H R E A D ---------------
Current thread (0x02721bf0): JavaThread "Thread-13" [_thread_in_Java, id=2980]
siginfo: ExceptionCode=0xc0000005, reading address 0x2a4ef9d8
Registers:
EAX=0x046b2923, EBX=0x2b4efc28, ECX=0x00000009, EDX=0x2a4ef9c8
ESP=0x0846f854, EBP=0x0846f860, ESI=0x2abfaaf0, EDI=0x0846f870
EIP=0x046b7597, EFLAGS=0x00010246
Top of Stack: (sp=0x0846f854)
0x0846f854: 00000000 2b4efc28 0846f868 0846f894
0x0846f864: 046b2923 00000000 20a9e490 20a9e4b0
0x0846f874: 20a9e4b0 0846f878 2abfa74d 0846f8a0
0x0846f884: 2b4ef400 00000000 2b4eef28 0846f89c
0x0846f894: 0846f8c0 046b29fa 00000000 20a9e490
0x0846f8a4: 0846f8a4 2aa94ec2 0846f8c8 2b2b33d0
0x0846f8b4: 00000000 2b29def0 0846f8c8 0846f8e8
0x0846f8c4: 046b29fa 20a9e490 0846f8cc 2abfa6d9
Instructions: (pc=0x046b7597)
0x046b7587: 56 8b 73 08 8d 76 30 53 68 00 00 00 00 8b 53 0c
0x046b7597: 8b 52 10 52 57 56 68 00 00 00 00 89 24 24 64 8b
Stack: [0x08370000,0x08470000), sp=0x0846f854, free space=1022k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
[error occurred during error reporting, step 120, id 0xc0000005]
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x02721bf0 JavaThread "Thread-13" [_thread_in_Java, id=2980]
0x07769fd8 JavaThread "Thread-12" [_thread_blocked, id=1000]
0x07781040 JavaThread "AWT-EventQueue-3" [_thread_blocked, id=3336]
0x027317e8 JavaThread "Thread-10" [_thread_blocked, id=1184]
0x0777c430 JavaThread "thread applet-nl.facingfacts.marketxs.tickertape.Tape.class" [_thread_in_vm, id=408]
0x076a9480 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=2172]
0x04542700 JavaThread "AWT-Shutdown" [_thread_blocked, id=2488]
0x04533458 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=3972]
0x045306a8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4016]
0x0278dba8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3552]
0x02743b58 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3864]
0x02745028 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1892]
0x02701bf8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=664]
0x0271a8e8 JavaThread "Finalizer" daemon [_thread_blocked, id=2752]
0x02742f98 JavaThread "Reference Handler" daemon [_thread_blocked, id=1872]
0x02759b18 JavaThread "main" [_thread_in_native, id=2988]
Other Threads:
0x02736e30 VMThread [id=2396]
0x0273db00 WatcherThread [id=1380]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 145K [0x20a80000, 0x20b20000, 0x211e0000)
eden space 512K, 23% used [0x20a80000, 0x20a9e8a8, 0x20b00000)
from space 64K, 35% used [0x20b00000, 0x20b05ba8, 0x20b10000)
to space 64K, 0% used [0x20b10000, 0x20b10000, 0x20b20000)
tenured generation total 1408K, used 874K [0x211e0000, 0x21340000, 0x26a80000)
the space 1408K, 62% used [0x211e0000, 0x212bab90, 0x212bac00, 0x21340000)
compacting perm gen total 8192K, used 1169K [0x26a80000, 0x27280000, 0x2aa80000)
the space 8192K, 14% used [0x26a80000, 0x26ba4538, 0x26ba4600, 0x27280000)
ro space 8192K, 62% used [0x2aa80000, 0x2af893f0, 0x2af89400, 0x2b280000)
rw space 12288K, 46% used [0x2b280000, 0x2b80fe20, 0x2b810000, 0x2be80000)
Dynamic libraries:
0x00400000 - 0x00419000      C:\Program Files\Internet Explorer\iexplore.exe
0x7c900000 - 0x7c9b6000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8fe000      C:\WINDOWS\system32\kernel32.dll
0x77be0000 - 0x77c38000      C:\WINDOWS\system32\msvcrt.dll
0x77d10000 - 0x77da0000      C:\WINDOWS\system32\USER32.dll
0x77e40000 - 0x77e86000      C:\WINDOWS\system32\GDI32.dll
0x77e90000 - 0x77f06000      C:\WINDOWS\system32\SHLWAPI.dll
0x77f40000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
0x77da0000 - 0x77e31000      C:\WINDOWS\system32\RPCRT4.dll
0x77720000 - 0x7788c000      C:\WINDOWS\system32\SHDOCVW.dll
0x77a40000 - 0x77ad5000      C:\WINDOWS\system32\CRYPT32.dll
0x77ae0000 - 0x77af2000      C:\WINDOWS\system32\MSASN1.dll
0x76880000 - 0x76904000      C:\WINDOWS\system32\CRYPTUI.dll
0x76bf0000 - 0x76c1e000      C:\WINDOWS\system32\WINTRUST.dll
0x76c50000 - 0x76c78000      C:\WINDOWS\system32\IMAGEHLP.dll
0x770e0000 - 0x7716c000      C:\WINDOWS\system32\OLEAUT32.dll
0x774a0000 - 0x775dd000      C:\WINDOWS\system32\ole32.dll
0x6ff20000 - 0x6ff74000      C:\WINDOWS\system32\NETAPI32.dll
0x77170000 - 0x77217000      C:\WINDOWS\system32\WININET.dll
0x76f20000 - 0x76f4d000      C:\WINDOWS\system32\WLDAP32.dll
0x77bd0000 - 0x77bd8000      C:\WINDOWS\system32\VERSION.dll
0x77390000 - 0x77492000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x7c9c0000 - 0x7d1e0000      C:\WINDOWS\system32\SHELL32.dll
0x5d4e0000 - 0x5d577000      C:\WINDOWS\system32\comctl32.dll
0x5b190000 - 0x5b1c8000      C:\WINDOWS\system32\uxtheme.dll
0x10000000 - 0x10020000      C:\PROGRA~1\CASEMA~1\SMARTB~1\SBHook.dll
0x75f20000 - 0x7601d000      C:\WINDOWS\system32\BROWSEUI.dll
0x20000000 - 0x20013000      C:\WINDOWS\system32\browselc.dll
0x77b00000 - 0x77b22000      C:\WINDOWS\system32\appHelp.dll
0x76f90000 - 0x7700f000      C:\WINDOWS\system32\CLBCATQ.DLL
0x77010000 - 0x770dd000      C:\WINDOWS\system32\COMRes.dll
0x77220000 - 0x772be000      C:\WINDOWS\system32\urlmon.dll
0x77f10000 - 0x77f21000      C:\WINDOWS\system32\Secur32.dll
0x779e0000 - 0x77a36000      C:\WINDOWS\System32\cscui.dll
0x765a0000 - 0x765bd000      C:\WINDOWS\System32\CSCDLL.dll
0x778e0000 - 0x779d7000      C:\WINDOWS\system32\SETUPAPI.dll
0x00e60000 - 0x00eec000      C:\WINDOWS\system32\shdoclc.dll
0x010f0000 - 0x010fe000      C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
0x7c340000 - 0x7c396000      C:\WINDOWS\system32\MSVCR71.dll
0x01130000 - 0x01165000      C:\Program Files\Norton AntiVirus\NavShExt.dll
0x7c120000 - 0x7c139000      C:\WINDOWS\system32\ATL71.DLL
0x7c3a0000 - 0x7c41b000      C:\WINDOWS\system32\MSVCP71.dll
0x71a50000 - 0x71a5a000      C:\WINDOWS\system32\WSOCK32.dll
0x71a30000 - 0x71a47000      C:\WINDOWS\system32\WS2_32.dll
0x71a20000 - 0x71a28000      C:\WINDOWS\system32\WS2HELP.dll
0x6af30000 - 0x6af6d000      C:\Program Files\Common Files\Symantec Shared\ccL30.dll
0x75e30000 - 0x75ee0000      C:\WINDOWS\system32\SXS.DLL
0x01190000 - 0x01465000      C:\WINDOWS\system32\xpsp2res.dll
0x75d40000 - 0x75dd1000      C:\WINDOWS\system32\mlang.dll
0x719d0000 - 0x71a10000      C:\WINDOWS\system32\mswsock.dll
0x61200000 - 0x61259000      C:\WINDOWS\system32\hnetcfg.dll
0x71a10000 - 0x71a18000      C:\WINDOWS\System32\wshtcpip.dll
0x76ea0000 - 0x76edc000      C:\WINDOWS\system32\RASAPI32.DLL
0x76e50000 - 0x76e62000      C:\WINDOWS\system32\rasman.dll
0x76e70000 - 0x76e9f000      C:\WINDOWS\system32\TAPI32.dll
0x76e40000 - 0x76e4e000      C:\WINDOWS\system32\rtutils.dll
0x76af0000 - 0x76b1e000      C:\WINDOWS\system32\WINMM.dll
0x5d1a0000 - 0x5d1a7000      C:\WINDOWS\system32\serwvdrv.dll
0x5b4c0000 - 0x5b4c7000      C:\WINDOWS\system32\umdmxfrm.dll
0x77c40000 - 0x77c63000      C:\WINDOWS\system32\msv1_0.dll
0x76d20000 - 0x76d39000      C:\WINDOWS\system32\iphlpapi.dll
0x745e0000 - 0x748a6000      C:\WINDOWS\system32\msi.dll
0x76970000 - 0x76a24000      C:\WINDOWS\system32\USERENV.dll
0x76ee0000 - 0x76f07000      C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f78000      C:\WINDOWS\System32\winrnr.dll
0x72240000 - 0x72245000      C:\WINDOWS\system32\sensapi.dll
0x76f80000 - 0x76f86000      C:\WINDOWS\system32\rasadhlp.dll
0x7d4b0000 - 0x7d796000      C:\WINDOWS\System32\mshtml.dll
0x014d0000 - 0x014f7000      C:\WINDOWS\System32\msls31.dll
0x02020000 - 0x0204a000      C:\WINDOWS\System32\msimtf.dll
0x02050000 - 0x0209b000      C:\WINDOWS\System32\MSCTF.dll
0x76330000 - 0x7634d000      C:\WINDOWS\system32\IMM32.DLL
0x020c0000 - 0x020d4000      C:\Program Files\Common Files\Symantec Shared\Script Blocking\scrauth.dll
0x020e0000 - 0x020f3000      C:\Program Files\Common Files\Symantec Shared\Script Blocking\ScrBlock.dll
0x6b180000 - 0x6b192000      C:\Program Files\Common Files\Symantec Shared\ccVrTrst.dll
0x0ffd0000 - 0x0fff8000      C:\WINDOWS\system32\rsaenh.dll
0x75bf0000 - 0x75c5e000      c:\windows\system32\jscript.dll
0x67310000 - 0x67350000      C:\WINDOWS\System32\iepeers.dll
0x72f70000 - 0x72f96000      C:\WINDOWS\System32\WINSPOOL.DRV
0x76260000 - 0x762d1000      C:\WINDOWS\System32\mshtmled.dll
0x72c90000 - 0x72c99000      C:\WINDOWS\system32\wdmaud.drv
0x72c80000 - 0x72c88000      C:\WINDOWS\system32\msacm32.drv
0x77bb0000 - 0x77bc5000      C:\WINDOWS\system32\MSACM32.dll
0x77ba0000 - 0x77ba7000      C:\WINDOWS\system32\midimap.dll
0x767a0000 - 0x767c7000      C:\WINDOWS\system32\schannel.dll
0x68100000 - 0x68124000      C:\WINDOWS\system32\dssenh.dll
0x03ea0000 - 0x04047000      C:\WINDOWS\system32\macromed\flash\Flash.ocx
0x76350000 - 0x7639a000      C:\WINDOWS\system32\comdlg32.dll
0x6d940000 - 0x6d94a000      C:\WINDOWS\System32\ddrawex.dll
0x736d0000 - 0x73719000      C:\WINDOWS\System32\DDRAW.dll
0x73b30000 - 0x73b36000      C:\WINDOWS\System32\DCIMAN32.dll
0x6d590000 - 0x6d5a1000      C:\Program Files\Java\jre1.5.0_04\bin\npjpi150_04.dll
0x5f230000 - 0x5f247000      C:\WINDOWS\system32\OLEPRO32.DLL
0x6d400000 - 0x6d417000      C:\Program Files\Java\jre1.5.0_04\bin\jpiexp32.dll
0x6d450000 - 0x6d468000      C:\Program Files\Java\jre1.5.0_04\bin\jpishare.dll
0x6d640000 - 0x6d7c9000      C:\PROGRA~1\Java\JRE15~2.0_0\bin\client\jvm.dll
0x6d280000 - 0x6d288000      C:\PROGRA~1\Java\JRE15~2.0_0\bin\hpi.dll
0x76bb0000 - 0x76bbb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d610000 - 0x6d61c000      C:\PROGRA~1\Java\JRE15~2.0_0\bin\verify.dll
0x6d300000 - 0x6d31d000      C:\PROGRA~1\Java\JRE15~2.0_0\bin\java.dll
0x6d630000 - 0x6d63f000      C:\PROGRA~1\Java\JRE15~2.0_0\bin\zip.dll
0x6d000000 - 0x6d167000      C:\Program Files\Java\jre1.5.0_04\bin\awt.dll
0x738b0000 - 0x73980000      C:\WINDOWS\system32\D3DIM700.DLL
0x6d240000 - 0x6d27d000      C:\Program Files\Java\jre1.5.0_04\bin\fontmanager.dll
0x6d1f0000 - 0x6d203000      C:\Program Files\Java\jre1.5.0_04\bin\deploy.dll
0x6d5d0000 - 0x6d5ed000      C:\Program Files\Java\jre1.5.0_04\bin\RegUtils.dll
0x6d3e0000 - 0x6d3f4000      C:\Program Files\Java\jre1.5.0_04\bin\jpicom32.dll
0x07610000 - 0x0761b000      C:\Program Files\Common Files\Microsoft Shared\OFFICE11\MSOXMLMF.DLL
0x6d4c0000 - 0x6d4d3000      C:\Program Files\Java\jre1.5.0_04\bin\net.dll
0x6d4e0000 - 0x6d4e9000      C:\Program Files\Java\jre1.5.0_04\bin\nio.dll
0x76930000 - 0x76938000      C:\WINDOWS\system32\LINKINFO.dll
0x76940000 - 0x76966000      C:\WINDOWS\system32\ntshrui.dll
0x76ad0000 - 0x76ae1000      C:\WINDOWS\system32\ATL.DLL
VM Arguments:
jvm_args: -Xbootclasspath/a:C:\PROGRA~1\Java\JRE15~2.0_0\lib\deploy.jar;C:\PROGRA~1\Java\JRE15~2.0_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.5.0_04 -Djavaplugin.nodotversion=150_04 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\Java\JRE15~2.0_0 -Djava.protocol.handler.pkgs=sun.plugin.net.protocol -Djavaplugin.vm.options=-Djava.class.path=C:\PROGRA~1\Java\JRE15~2.0_0\classes -Xbootclasspath/a:C:\PROGRA~1\Java\JRE15~2.0_0\lib\deploy.jar;C:\PROGRA~1\Java\JRE15~2.0_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.5.0_04 -Djavaplugin.nodotversion=150_04 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\Java\JRE15~2.0_0 -Djava.protocol.handler.pkgs=sun.plugin.net.protocol vfprintf
java_command: <unknown>
Environment Variables:
PATH=C:\PROGRA~1\Java\JRE15~2.0_0\bin;C:\Program Files\Internet Explorer;;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;.
USERNAME=Eigenaar
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 10 Stepping 0, AuthenticAMD
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 family 6, cmov, cx8, fxsr, mmx, sse
Memory: 4k page, physical 458224k(151432k free), swap 1084168k(835788k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_04-b05) for windows-x86, built on Jun 3 2005 02:10:41 by "java_re" with MS VC++ 6.0
can anybody please help me what to do with this strange thing?

Unable to connect to the OracleForms application through a J2EE application

Hi there,
I have deployed a custom J2EE application in Middleware instance of my Oracle 10g AS 10.1.2
The application is sso enabled . Once a user logs in the application he is able to see a jsp in which i display hyperlinks for him to access.
One of these hyperlinks is pointing to the forms application.
the url is http://psc-pc0592:7778/forms/frmservlet?config=abs_deploy[b]
Once i click on the URL the forms applet begins to load but as the applet opens up i get the database logon screen.This should not happen
I am already logged and have been verified by sso.
Also the forms configuration is associated with a datasource.
I am not able to get as to why i get that screen when it shoud directly connect to the forms application.
Any help on this is appreciated.
Thanks & Regards,
Madhur Pant

when you go through your carrier provider, there is an additional step in the SSL tunnel. Not sure how this transcribes, but it is possible that your carrier does not use the same port as the one you want it to use.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Unable to connect to SAP business one through web service

Hi
I'm facing some problem with my web service. I tried to connect to SAP but it gave me an "System.Exception"
Public Function ConnectedToDatabase() As Boolean
Try
Dim oCompany as SAPbobsCOM.Company
oCompany = New SAPbobsCOM.Company
Dim lRetCode, lErrCode As Long
Dim sErrMsg As String
sErrMsg = ""
Session("g_server") = System.Configuration.ConfigurationManager.AppSettings("Server")
Session("g_companyDB") = System.Configuration.ConfigurationManager.AppSettings("CompanyDB")
Session("g_DBUserName") = System.Configuration.ConfigurationManager.AppSettings("DbUsername")
Session("g_DBPassword") = System.Configuration.ConfigurationManager.AppSettings("DbPassword")
Session("g_Username") = System.Configuration.ConfigurationManager.AppSettings("Username")
Session("g_Password") = System.Configuration.ConfigurationManager.AppSettings("Password")
oCompany.Server = Session("g_server")
oCompany.CompanyDB = Session("g_companyDB")
oCompany.DbUserName = Session("g_DBUSerName")
oCompany.DbPassword = Session("g_DBPassword")
oCompany.UserName = Session("g_Username")
oCompany.Password = Session("g_Password")
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
lRetCode = oCompany.Connect()
When the codes runs to the line IRetCode = oCompany.Connect(), it will return an error code -8006. Those session got the correct information from the web.config. Then exception is throw in.
I try restarting my com and restarting my suite manager. Usually this will solve the problem. However, it won't for this time. I hope will receive some solutions for my problem. Thanks for your time.

Hi,
Try To Set the db server type to MS SQL 2005 (value 4)
oCompany.DbServerType = BoDataServerTypes.dst_MSSQL2005
or
oCompany.DbServerType = 4
and
oCompany.UseTrusted = False
Regards,
János

Since installation of last 4.0b12 version, I'm unable to connect to any https site through a proxy. Connection works if no proxy is involved, with proxy I receive a message like "proxy refuses the connection". Thank you for your answer

I'm connected to a customer's network and I have to use a proxy.
I correctly authenticate myself to the proxy and I try to access https://mail.google.com.
I receive a message that the proxy refuses the connection.
I noticed that this happens with all the https sites.
If I connect with my mobile internet key without proxy, I'm able to connect: the combination of proxy and https is failing.
Other computers on the same network with different browsers can connect to https through the proxy.

I'm working with the Firefox development team on this one. As far as I can tell, they seem to think that there are 2-3 different problems with the same/very similar symptoms, all involving proxies. They think they've fixed them all for RC1.
Right now, it looks like we just want people to test an early build.
You can get that here:
[http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/2011-03-03-12-mozilla-central/firefox-4.0b13pre.en-US.win32.installer.exe]
Install that somewhere (not in your current install directory), quit all open Firefox instances and try it. Let me know if it works.

Unable to connect Power Query to Salesforce through custom domain

If I try a straight login / connection through Power Query, I get "Your company's authentication service is currently down. Please contact the administrator at your company for more information".
If I try to connect via the Custom Domain, new box will pop up, opening up an IE window in Excel, where I can log in and it does connect me to my default page, but the Power Query connection does not connect.
You can see the successful connection but the Salesforce connection in Power Query isn't made. Is this a custom domain connection issue, a company security issue or a Saleforce connection bug?

First off, I can never undestand how Microsoft can have these forums operate efficiently if just about ever response is entered as a duplicate entry. Across many different forum channel, for years, I continue to see multiple entries, regardless of
browser I'm using. It just seems unprofessional and so counter productive to the image that Microsoft is trying to project, but that's a different rant.
I'm in the process of getting some information on how our system is set up. Working for a large company, local IT is good for somethings but when it comes down to system settings for global salesforce roll-outs, the team can only answer so much.
Until I discover the settings at my side, it's a bit early to have some mark a solution as answered if not all the facts are in. Someone have some sort of strange forum quota for closures going on?
Just curious. There's this add-in that is supposed to let you connect to Saleforce, but may not connect to Production or Sandbox environment or custom domain because there's a choice? I realize this is the first iteration and the video and description
look good but how long before it becomes more versatile and open to more users whom might be in a similar situation?
Don't get me wrong guys (and girls). I love that this product and these various forums do exist to flush out problems of users and I sincerely appreciate the time and effort everyone puts into helping out where/when they can, but it is very much a
sour grapes situation for me. It's a bit like 1 step forward and 2 steps back. It will be nice when we get to the final destination, I just hope it happens sooner, rather than later.

Nokia c5 unable to connect with pc in pc suite mod...

nokia c5 is unable to connect with computer via pc suite mode but it get connected via mass storage mode . So i am unable to connect internet in my pc through my mobile. Whenever i m connecting my mobile , hardware installer of computer can't install my mobile due to code 39 shown in Computer.

is your pc with ovisuite? Try with pcsuite

Cannot File share or connect to server through VPN.

I used to connect to my work server through VPN. During September through December of last year, I had no problem connecting to the server, but I could never file share. A few weeks ago I tried connecting again but I can't. The VPN connection is fine, and there's no problem with the server, but I can't connect to it. I'm pretty sure I haven't changed any of my network settings.
Any Ideas??

Just thought I would give this a bump. I recently transferred over to a new computer (I did not import/migrate settings, I reentered them. No longer can I VPN into work. Running 10.5.7 I have entered in the correct DNS settings and the domain. No errors, it says I am connected but I cannot contact any servers or file share. Any thoughts?

Unable to connect shared drive on Sun host via PCNFS v5.1

I am trying to setup a shared directory on a Sun host running SunOS Release 5.6. I have an old version of PCNFS v5.1 for DOS that I require for a legacy application which seems to be setup correctly. However when I try to mount a shared drive on the Sun server I using "mt.exe" I get the message "Unable to connect the resource '/dirname' from the Server 'name'. Reason: Unrecognized RPC error number 1005." When I try to use the "net use..." command it also fails with the message "PCNFS 251F: The NET USE failed with an internal error code of 1005." I have mountd and rpc.pcnfsd running on the Sun host and would appreciate any help that can be provided. Thanks!

I have looked under Wireless/Advanced Wireless Setting, and in fact, all around in the setup, but don't have any parameter called AP Isolation. Router model is BEFW11S4.
Any other ideas?

Network host HPF.local is busy - Unable to connect to printer;

Recently when trying to print with a wifi bonjour networked OfficeJet J4680 this is the notice I receive, and it will never print.
Does anyone have any advice other than throwing the printer, or my computer out of the window?
Network host 'HPFBlah.local' is busy; will retry in 30 seconds...
Eventually the notice will change to...
'Unable to connect to printer; will retry in 30 seconds...';

Removing the wifi networked Printer from System Preferences > Printers, and then turning OFF the OfficeJet's wifi option, and instead plugging it into the Airport with a USB cable resolved the issue.

ERROR: Unable to connect to any of the specified MySQL hosts.

Hi all,
I have run into an issue and not able to resolve it.
There was a requirement to connecting to a MySQL data source. For that I unknowingly added an entry in the "ODBC Data Source Administrator" ->
User DSN & System DSN
I was totally unaware that I am breaking my SP setup (Development). Now Central Admin site and all other sites have stopped working.
I tried repairing by re-running the config wizard but no use. Error I get is "An unexpected error has occurred." OR "Unable to connect to any of the specified MySQL hosts."
But when I try accessing other site, its showing an error from the "machine.config" file: >
Line 284: <siteMap>
Line 285: <providers>
Line 286: <add name="MySqlSiteMapProvider" type="MySql.Web.SiteMap.MySqlSiteMapProvider, MySql.Web, Version=6.9.6.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
Line 287: </providers>
Line 288: </siteMap>
Source File: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\machine.config
For record, I have already removed those entries from that User DSN & System DSN.
Still error persists.
If some has ANY IDEA how to resolve it... please help!
Regards, Nayan

Can you give us a description of what is happening? Errors form the Application and System Event Log, and/or ULS logs?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Anyconnect: unable to connect to host by hostname through VPN

Similar Messages

Maybe you are looking for