Anyconnect VPN not prompting to accept Certificate (Windows 7)

Hello,
I have an issue with windows 7 and anyconnect. When trying to connect to the VPN server the anyconnect client pops up a window saying that the server certificate cannot be verified.
Doing the same in a windows XP machine just pops a window and prompts me to accept or refuse the certificate, which at least works.
Any hints on this?
Regards,
Alex

I believe that Chandru's concern is in his statement that his DSL modem is controlled by the RAS service.
I agree with Andrew that Chandru probably does not need the RAS enabled. I have used several Dell laptop running XP and connected to DSL just fine without needing RAS. If there is some aspect of how the laptop is configured that results in needing RAS for the modem then perhaps Chandru can clarify this for us.
HTH
Rick

Similar Messages

Anyconnect is not able to run with windows routing & remote access service

I am unable to connect with the new Anyconnect VPN installation when it tries to connect, it raises an alert that says, "The Windows Routing and Remote Access service is not compatible with the VPN client. The VPN client cannot operate when this service is running."
I have a Dell system laptop, OS is XP SP2 with all the latest Windows updates up to SP2. My internet connection is DSL modem. Internet hardware is an
external adapter connected to my USB port. The adapter is controlled by the Routing and Remote Access service mentioned in the alert message.
Can anyone help me how we can solve this issue. I appreciate the help and currently some of the users can not connect to my network who works from home.
Thanks
Chandru

I believe that Chandru's concern is in his statement that his DSL modem is controlled by the RAS service.
I agree with Andrew that Chandru probably does not need the RAS enabled. I have used several Dell laptop running XP and connected to DSL just fine without needing RAS. If there is some aspect of how the laptop is configured that results in needing RAS for the modem then perhaps Chandru can clarify this for us.
HTH
Rick

Once cancelled, Accept Certificate window never appears again! (HELP!)

Ok, I am developing a self-signed applet for me and a few friends to play a webgame.
They can still play. In fact, they're having a grand ole' time. but ME, the DEVELOPER is locked out.
WHY? because I hit "cancel" on the "accept certificate" one time.
It's been 3 days now, and I'm at my wits end trying to figure out how to flush my accepted / rejected certificates!
It's not in the java > security > control panel thing, because I hvae played around with every option there, and still in both my browsers (even after reinstalling firefox) I get just a plain white-screen whit no popup window when I visit the html.
Simply stated: How do I force the "Accept Certificate" dialogue to pop up again? I'm sure anyone who's made a signed applet experiences this worry!!!

Hi,
The original posters have probably worked this out already ;)
On Windows you can control certificates by going to Control Panel->Java Control Panel->Security and click "Certificates"

Anyconnect VPN not working after Firefox upgrade - "Certificate import has failed"

Hi All,
I am running anyconnect 3.0.5080 on ubuntu 11.10x86. I had everything working using my company's enroll process but after a recent Firefox upgrade (12.0) I was no longer able to authenticate. I have had this problem before and fixed it by re-enrolling.
This time when I try to re-enroll it accepts my CA challenge password and prompts me to close all browsers before continuing. After ensuring that no browsers are running and clicking 'Accept' I am presented with the message "Certificate Enrollment - Certificate import has failed."
Can anyone help me with this?
Thanks,
Philip

Hi Nick,
Did you try to import .der/.pse file? if yes, this is not the case for ECC6.
This is the procedure for ECC6:
1) Log to Visual Administrator
2) Go to Server -> Services -> Key Storage
3) Select the TicketKeyStore view
4) Export SAPLogonTicketKeypair-cert file (file extension should be crt)
5) Import the crt file to the ECC6 system.
Regards,
Omri

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

Anyconnect VPN Certificate-matching not working

Cisco Adaptive Security Appliance Software Version 9.1(4); Device Manager Version 7.1(5)100; anyconnect-win-3.1.05152-k9.pkg
Hello, I am trying to implement Certificate Matching for certain client profiles. However 'certificate matching' does not seem to work- another certificate is always selected instead for Anyconnect SSL VPN authentication.
For example the client has two client-certificates installed: masin2 and masin3. I have configured the client-profile certificate-matching to use masin2 for authentication, but Anyconnect still chooses masin3 instead.
The client-profile looks like this:
<CertificateMatch>
           <KeyUsage>
               <MatchKey>Key_Encipherment</MatchKey>
               <MatchKey>Digital_Signature</MatchKey>
           </KeyUsage>
           <ExtendedKeyUsage>
               <ExtendedMatchKey>ClientAuth</ExtendedMatchKey>
           </ExtendedKeyUsage>
           <DistinguishedName>
               <DistinguishedNameDefinition Operator="Equal" Wildcard="Disabled" MatchCase="Disabled">
                   <Name>CN</Name>
                   <Pattern>masin2</Pattern>
               </DistinguishedNameDefinition>
           </DistinguishedName>
       </CertificateMatch>
Any suggestions/ideas? thanks for any input,
heiki.

enabling wildcard did not help. also tried disabling/enabling automatic certificate selection- no luck.
I have also tried with and without different keyusage and extendedkeyusage- no difference.
The Client Profile is correctly updated on the client PC every time a change in made, but it seems like Anyconnect is not evaluating the Certificate Matching fields at all. And it seems like the problem is only with the CertificateMatch fields, because other fields are used as configured (for example: certificatestore, retainvpnonlogoff, usestartbeforelogon and so on).
I even upgraded Anyconnect to the latest version 3.1.05160 and still- anyconnect completely ignores certificatematch configuration in client-profile.

AnyConnect VPN with Windows 8.1

Has anyone else had issues with the anyconnect vpn client on windows 8.1? I cannot get it to work for the life of me. It will connect and find the gateway, prompt for password, then ask about certificate, the status on the client itself quickly changes to updating software, then blows up and with the failure to connect message...
Any ideas?

What I can tell you is that I have Windows 7 64bits and anyconnect works fine. ver 3.1.03103.
If you feel like share the address for the gateway and I will tell you if it ask for autentication. I don't really think the address is critical information.
It's your call.

OTP 2FA Problems with DA 2012 R2 and Windows 8.1 Client - Not prompting or OTP Code

Hi
Just seeing if anyone has come across the same issue with their WIn 8.1 clients not prompting for 2FA once configured with DirectAccess 2012 R2?
I have created the 2x OTP certificates, enabled OTP via PowerShell and set up the RADIUS server but whatever happens the Win 8.1 client does not get prompted for 2FA - They connect seamlessly?
I have also configured the DAProbeUser on the RADIUS server
Any help appreciated
Thanks

I was afraid that you'll said that
I hate to be the annoying guy but take a look at this KB article:
http://support.microsoft.com/kb/2787534
Applied to: Windows 8\2012,
Doesn't Apply to: Windows 8.1\2012 R2
and - for a fact, doesn't include in Windows 8.1\2012 R2 as this bug still exists in those operating systems.
another annoying fact - No other update was released for these version yet.
this example approves that not every hotfix \ updates that was released for 8\2012 before 8.1\2012 R2, is already included in 8.1\2012 R2
and allow me to add another fact.
when you configure DirectAccess via the remote access wizard it creates a WMI query called
DirectAccess - Laptop Only WMI Filter.
after you create it in Windows Server 2012 R2 - look at the WMI Query and you'll see that by default it doesn't apply to version 6.3! the version for Windows 8.1.
if you want to add the support for Windows 8.1 you have to modify manually the query which is of course, not supported by Microsoft.
That is just another symptom that makes me wonder if Microsoft did ANY change or update to DirectAccess 2012 R2
Tamir Levy

Error 1722 Installing Anyconnect VPN (Windows 7)

Hi,
i'm trying to install Anyconnect VPN Client (anyconnect-win-2.5.2006-web-deploy-k9) to connect the university wifi, but i always get an error 1722
There
is a problem with this Windows Installer package. Ein Programm, das als
Teil des Setups ausgeführt wird, wurde nicht wie erwartet beendet.
Contact your support personnel or package vendor.
I had this error and i couldn't fix it and i reinstalled the Windows 7 (HP Compaq 610). Than i could install the AnyconnectVPN. Today it tried to update, than i get the same error. Now i can't use it and i can't install it.
There are a lot of people with this problem but there is no information in internet to fix this problem.
I really need help. I don't want to reinstall the windows. (It's also not a solution).
There is a key (Standart) HKEY_LOCAL_MACHINE/SOFTWARE/..../RUNONCE without a value.
What should i do now?

Have you uploaded the AnyConnect package to the vpn gateway yet? I would recommend that you uploaded the latest version: AnyConnect version 2.5.2017.
Firstly you would need to upload the package to the vpn gateway, and you would need to use the following:
anyconnect-win-2.5.2017-k9.pkg
Once you have uploaded the package to the vpn gateway, you can download and install the AnyConnect onto your Windows 7 in 2 ways:
1) From Windows 7, assuming that the vpn gateway has been configured for AnyConnect, then you can browse to the vpn gateway ip address, and the AnyConnect software will be automatically downloaded and installed on the Windows 7 machine.
2) Alternatively, you can also pre-install the AnyConnect using the following file:
anyconnect-win-2.5.2017-pre-deploy-k9.msi
Hope that helps.

Browser does not ask to accept a certificate for an applet

I wanted to write an applet that enables the user to access the local file system. On the internet i found the following resource:
[http://www.captain.at/programming/java/] which actually is great. So i followed the instructions on the page an everything works fine. My file structure looks like this
fileEditApplet
Index.html
subfolder "fileEditApplet" contains the files
->fileEditAppletKey.crt
->Compile.bat
->LocalFile.class
->localfile.jar
->LocalFile.java
So my compile.bat looks like this:
javac LocalFile.java
jar cvf LocalFile.jar LocalFile.class
jarsigner LocalFile.jar fileEditAppletKey.crtWhen i compile the applet the system asks me to enter the passwort for the key i genearted following the instructions on the webpage. Everything works fine. Now, i want to open the Index.html in my Firefox Browser. The applet loads fine nothing to complain about. But firstly, i notice that i'm not asked to accept any certificate which i do not understand. Then, i try to open a simple text file and on the Java console i get the following error message:
Exception in thread "AWT-EventQueue-4" java.security.AccessControlException: access denied (java.io.FilePermission C:\Programme\Mozilla Firefox\install.log read)
at java.security.AccessControlContext.checkPermission(Unknown Source)
...Seems as if the certificate is not accepted or seen in any way. I do not know what i have to alter to get this running.

Hi toom,
I'm having a few applet problems myself, but I noticed in my testing that when the server hosting the page/applet is on the same LAN, it doesn't ask me for a certificate.
Basically, I put the page with the applet and the .jar on my webspace given by my ISP and, as expected, it always asks me to accept a certificate.
However, when i put the page with the applet and the .jar on a server on my LAN it never asks me to accept a certificate.
So I'm guessing that because the .jar is on a local network the browser ignores any security.
Hope this helps!

Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate

Has anyone had this problem with IPad 3 after upgrade to IOS 7,
trying to to connect VPN , but I get this messag, "could not validate the server certificate".
I am trying to connect to Oracle VPN.

Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated.

HT5868 I am always prompted to Trust this computer, but still my iTunes will not sync. I have Windows 8 on my laptop. All of my photos transfer to the computer just fine, but the iTunes is not communicating between my phone and laptop.

I am always prompted to Trust the Computer by my iPhone 4S, but still my iTunes will not sync. I have Windows 8. All of my pictures transfer to the computer when I plug my phone in, but not the iTunes. My playlists and purchased songs are not syncing either from the computer to the phone, or from the phone to the computer. I have been working on this for days and have tried every suggestion in Help

you just need to call the apple support or just book an appointment at the genus bar at your nearest apple store.

Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com

Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN

Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,

Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given.

AnyConnect VPN Warning Message

Hi
I have setup AnyConnect VPN and all works fine apart from the warning messages appearing about the server being Untrusted.
I am not too good with certificates so any help will be much appreciated. When I open anyconnect client and click connect, the warning appears then so I click continue anyway to carry on. Then after entering username//password the warning appears a second time and again i click continue and carry on.
We had a wildcard certificate so I installed in on the asa in the CA certificates section, Now the 2nd warning has gone but the first one still appears.
Any ideas???
Thanks

You can simply accept the self-signed certificate the first time you are presented with that message and direct AnyConnect to always trust such certificates.
If you don't want to do that, you need to make your clients automatically trust this certificate from your ASA. You can do that several ways. You mentioned using a 3rd party vendor - that ends up being the method of using a vendor in the trusted root Certificate Authority (CA) list. If you don't use one of the 3rd party ones, you will need to push out the trust via some software deployment method - e.g. a GPO for Windows clients in a managed AD setup or via pre-deploying with yet another 3rd party tool like LANdesk.
If you don't have an internal CA or AD-managed infrastructure for your clients then just telling users to click "always trust" is the path of least resistance (although the least secure).

Anyconnect VPN not prompting to accept Certificate (Windows 7)

Similar Messages

Maybe you are looking for