Anyconnect + windows 8.1 problem

Hei guys,
I'm getting really frustrated with this problem now. I have searched everywhere and tried everything I could and still I haven't solved this problem.
After upgrading to windows 8.1, I uninstalled the previous version of anyconnect, removed the driver, and then installed the version
3.1.05152. When I try to connect to my vpn, this message appears:
"anyconnect cannot confirm it is connected to your secure gateway"
and the connection is closed. I installed the server certificate into the trusted store, enabled/disabled the virtual port driver, restarted, unchecked the option "block connections to unstrusted servers" .. and nothing, always the same error message.
What else can I try to make it work?
Thanks!

I also have this problem and have tried every available solution that I've come across from the DNE fix the registry fix to everything else. The registry change worked for Windows 8 but does not work for me in Windows 8.1.

Similar Messages

  • I have lightroom 5 with 5.7 updated.   I use windows.  My problem is with the spot healer or remover.  It worked perfectly when I click on it it don't have the additional circle with a line attached to it where I can move it to another place for better sa

    I have lightroom 5 with 5.7 verson updated.  I use windows.  My problem is with the spot healer or remover in the develop.  It worked perfectly for a while and then suddenly the other circle with a line attached to it where you can move it to a better spot stopped showing up.  I uninstalled the software and re installed it again but it didn't fix the problem and its still the same.  Help please.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • TS3074 im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    Try the following user tip:
    " ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

  • Elem 4.0 in Windows 7 without problems ?

    Is it possible tun run Photoshop Elem 4.0 in Windows 7 without problems ?
    Warnings about compability problems.

    Please refer to this related post
    http://forums.adobe.com/message/4964761#4964761

  • Windows file permissions problems

    We have an Xserve G5 that was running Server 10.3. I upgraded it directly to Server 10.5. Since then, I am having problems with some of our Windows users.
    When they create a new folder, it puts them as the owner, but gives them NO rights. I am using ACLs to give full rights to the group that needs access, and also setting the POSIX group rights to read/write. So once they leave that folder, they can no longer get back in. I have SMB set to inherit rights from the parent, and the ACL is set to inherit as well. Other people in the group can access the folder, just not the owner! I change the owner permissions and all is well (for that folder at least). How do I need to set SMB so it follows the inheritance I set?
    Once I have the folder set correctly, any new files created there have the POSIX group set to read only. The ACL inherits properly and still has full control. The owner is set correctly, usually. It is not consistent.
    Once someone creates a file in any folder, if a Windows user modifies a file someone else created, it changes the owner name and gives them no rights. It also creates a new ACL record. If the original owner was a Mac user, it creates a new explicit ACL with all rights except execute and delete. If the file has ACL records already, it duplicates them and gives whatever rights it feels like (it seems). One new record may say Allow Delete only, and the next one say Allow Read except for execute. The only thing for certain is it will never match the original ACL. It always adds the new ACLs at the top of the list, and the duplicates are grayed out as if they were actually inherited that way. The most 'popular' file I've found so far had 128 "inherited" ACL records!
    It is also denying access to some folders that the user has the correct permissions for. For instance, I can create/modify/delete files logged in on the Mac side, but when I log in on Windows, I have problems accessing files/folders. It shows everything as read only. Even if I change the properties in Windows, it will revert back to read-only when I apply the change.
    We have a new Xserve that we will be moving the file services to. At that time, all the Windows users will be moved completely to the Mac side - currently the Windows users are accessing the Xserve and a Novell server.
    Thanks in advance for any help.

    Hi Thy,
    Based on my research, the Trusted Installer is a service, for those resources which only allow Trusted Installer to modify, neither Administrator nor System can modify them.
    I am wondering that how secure the network and physical environment is that you need to create a GPO to prevent users making permissions changes on system files. These system files normally only can be modified by Administrators,
    System or Trusted Installer, which is secure enough when we don’t add users we don’t trust enough to Administrators group.
    >What is the best way to undo this while leaving the audit failures turned on and still retaining the correct permissions on all the files?
    As long as administrators on these machines are qualified, you can remove the Group Policy. If not, please don’t make any user you don’t trust as Administrator.
    >What happens to the files that aren't owned trustedinstalled than now have the trustedinstaller default permissions under system32 and syswow64 if I were to remove the gpo?  What file  permissions would be retained?
    We should keep the default permissions, if those files weren’t owned by Trusted Installer before, we should change the original owner back, vice versa.
    Here are some related articles below I suggest you refer to:
    New ACLs Improve Security in Windows Vista
    http://technet.microsoft.com/en-us/magazine/2007.06.acl.aspx
    SYSK 277: How-To Bring Back the TrustedInstaller
     http://blogs.msdn.com/b/irenak/archive/2007/01/30/sysk-277-how-to-bring-back-the-trustedinstaller.aspx
    Best Regards,
    Amy

  • ISight - connects with windows users no problem?

    I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

    It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
    I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
    The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
    I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
    Skype has a video plugin (only for Windows)
    Yahoo! Messenger does not have voice yet (2.5.3)
    MSN is badmouthing because of the "M"
    I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
    The best two alternatives I found are:
    a) AIM 5.9
    b) Trillian (www.trillian.cc)
    Both use a free AIM screen name.
    AIM works fine, see also EZJim pages.
    TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
    The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
    TrillianBase is free but has no Video capabilities. The Pro version is 25$.
    Regards Coen
    ps. if you want to test your setup use my AIM screenname: coenjeukens

  • TS3297 when i try to open itunes store error comes up saying windows experienced a problem and program stopped working

    can some help me everytime I try to open itunes store an error comes up saying windows experienced a problem and program stopped working. Itunes opens this just happens when I go to the store

    Hello Ducati848,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    You might get some help over on the shuffle discussions.
    http://discussions.apple.com/forum.jspa?forumID=822

  • FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

    FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

    You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
    * for information on the options available see [[Updating firefox]] <--- clickable link ---

  • Mat****a UJ-8315: Error message - windows found a problem

    I'm trying to copy a film to a dvd/cd and the windows always display the message: windows found a problem.....what might be wrong ?

    Hi
    Usually its not possible to copy the original DVD movies with the simply burning application because of the copy protection.
    Did you get also this same error message if you will copy simple files on the CD or DVD? If not so I assume the medias are copy protected and therefore its not possible to burn the medias.
    The second possibility is that you use not compatible medias. Usually in the user manual of your notebook you will find a list of tested and supported medias which should work properly.

  • I bought a scanner Fujitsu (model sv600) in which is delivered a CD of installation of Acrobat 11 for Windows. The problem is that I possess an iMac. How can it be done?

    I bought a scanner Fujitsu (model sv600) in which is delivered a CD of installation of Acrobat 11 for Windows. The problem is that I possess an iMac. How can it be done?

    This page ScanSnap SV600 : Fujitsu Global shows that Acrobat is for Windows, not for Mac. There is no trade-up option so far as I know. Indeed, Acrobat Standard does not exist for Mac at all, only Acrobat Pro. Which you could buy.
    Or, you can invest in Parallels Desktop which will allow you to run Windows apps on your Mac.

  • How to fix windows 7 sound problem

    Hello, I've been searching all over the internet for a solution on how to fix a windows 7 sound problem. I'm running it on bootcamp ,but There's absolutely no sound to it. Is there anyone that can please help me?

    Hi;I followed your instructions but still it is the same!
    Regards
          From: Pat Willener <[email protected]>
    To: Said Ahghari <[email protected]>
    Sent: Saturday, 10 January 2015, 3:58
    Subject:  How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
    How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
    created by Pat Willener in Adobe Reader - View the full discussionEven more strange!  The only thing I can think of is a complete uninstall/reinstall. Download, unzip, and run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7082910#7082910 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7082910#7082910 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Windows 2000 boot problem

    I have just moved my system to the new MX-6585 board - Did an Windows 2000 "upgrade" to initiate total hardware scan.
    System works ok, when it has booted, but booting is sooo slow.
    Found a Microsoft article describing the problem:
    SYMPTOMS
    After you choose to start Windows from the Boot menu, you may experience a long delay (or pause) before your computer finishes starting. Note that this delay may range from 10 seconds to a minute. Also, this delay occurs before the Starting Windows progress bar appears, and your computer may appear to stop responding (hang) during this time.
    CAUSE
    This behavior can occur if Windows is installed on a drive or a partition to which Windows cannot gain access with normal Basic Input/Output System (BIOS) INT-13 or INT-13 extension calls. When Windows Setup determines it cannot use BIOS calls to start, it uses scsi() or signature() syntax in the Boot.ini file instead of multi() syntax.
    My question is: Does MX-6585/BIOS in any way hinder the INT-13 calls to my Adaptec 2940???

    Thanks! I sent the following message:
    There are no IDE devices in my system, only SCSI. My hd is an IBM Ultrastar 36XP DRHS-36D. When I start the system up, the SCSI & MSI BIOS screens display normally, then BOOT.INI appears. After I select one of my NT-type OS's (NT4, W2K, WXP), there is a 30-second delay between the time I press the Enter key at the BOOT.INI screen and the time the OS actually starts to boot. (The BOOT.INI countdown time is limited to 5 seconds. I am *not* talking about this time.)
    Since the same hardware was transferred from another installation (with a non-MSI mb) in which the same Adaptec drivers were used but this 30-second delay did not occur, the delay appears to be due to the MSI BIOS. Interestingly, W98 is also installed on this hd and it appears in the BOOT.INI list. When I start up W98, the 30-second delay does not occur -- as soon as I press the Enter key, W98 starts to boot.
    Other end users have complained about this same boot delay. See the post "Windows 2000 boot problem" found in the MSI user forum here: http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=6970&boardid=10&page=1
    I'd estimate our chances of success at 1%. Still, it's far better to complain and not be heard than never complain. That way, we get to complain even more.  

  • Anyconnect secure mobility and windows 8.1 problem

    I installed the anyconnect secure mobility client 3.1.05152 version on a couple o windows 8.1 workstations
    on my home network.
    There are no restrictions from my firewall towards the outside world.
    When i try to connect for the first time i get the certificate message and the login prompt.
    After successfully entering the login details the clients connects and i get a message saying that
    the vpn clients is getting updated. After that nothing. If finally disconnects and when i try to re-establish
    a connection i get  the following message:
    "The service provider in your current location is restricting access to the internet blah blah blah..."
    That is not the case though. Osx vpn client from the same location connects successfully
    I have tried removing rebooting, reinstalling the product always with admin rights. every single time the clients connects
    the first time and ends up with the same issue.
    Anyone knows what is going on?

    Is there an older package present and set as the AnyConnect image on the ASA?
    If you could share the tunnel-group, group-policy, and any profile (xml file) from the ASA that would assist further troubleshooting.

  • AnyConnect customized NAM Profile Problem

    Hello,
    i have a problem with the deployment of customized NAM profiles for AnyConnect 3.0.1047 clients on a Windows XP machine. I successfully installed via msiexec the anyconnect-win-3.0.1047-pre-deploy-k9.msi /passive /log c:\temp\anyconnect-base.log PRE_DEPLOY_DISABLE_VPN=1 and then the
    anyconnect-nam-win-3.0.1047-k9.msi /passive /log c:\temp\anyconnect-nam.log.
    But the folders ...\All Users\Application Data\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager and the subloder logs, newConfigFiles and setup where not created during setup prozedure.
    So i created a profile with the AnyConnect profile editor and saved it as userConfiguration.xml in the setup folder. After restarting the anyconnect just ignores the xml file and starts with some default. In the try icon i see a wired LAN called wired. I can create another wired LAN from the advanced configuration of the client but i rather would use a customized profile without accessing every client.
    Any Ideas?
    Thanks in advanced for your feedback
    Alex

    Hi Tarik,
    thanks for your answer. I'll uninstall anyconnect disable the antivirus software and try again. I got some logfiles from the DART tool, i think i have some other issues. Here is some output of the logfile. it is particular this line which worries me.
    9: BS3206: Aug 01 2011 01:19:48.312 -0100: %NAM-6-INFO_MSG: %[tid=136]: Invalid development version of configuration file.
    1: BS3206: Aug 01 2011 01:19:48.265 -0100: %NAM-7-DEBUG_MSG: %[tid=2036]: NAM Plugin Agent: SSO Logon Module service entry does not exist
    2: BS3206: Aug 01 2011 01:19:48.265 -0100: %NAM-7-DEBUG_MSG: %[tid=2036]: NAM Plugin Agent: Starting main service
    3: BS3206: Aug 01 2011 01:19:48.265 -0100: %NAM-7-DEBUG_MSG: %[tid=2036]: NAM Plugin Agent: main service failed to start
    3: BS3206: Aug 01 2011 01:19:48.296 -0100: %NAM-7-DEBUG_MSG: %[tid=1812]: Starting oneTimeTimer with 24 seconds left
    4: BS3206: Aug 01 2011 01:19:48.296 -0100: %NAM-7-DEBUG_MSG: %[tid=1812]: CoreLib:TRACE: context=ace, thread exec, ThreadImpl.cpp:74, m003FDA68, err=0(OS_OK), thread_id=2044
    5: BS3206: Aug 01 2011 01:19:48.296 -0100: %NAM-7-DEBUG_MSG: %[tid=1812]: CoreLib:TRACE: context=ace, thread exec, ThreadImpl.cpp:74, m003FDBA0, err=0(OS_OK), thread_id=136
    7: BS3206: Aug 01 2011 01:19:48.296 -0100: %NAM-6-INFO_MSG: %[tid=136]: Opening file C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\system\/configuration.xml ...
    8: BS3206: Aug 01 2011 01:19:48.296 -0100: %NAM-7-DEBUG_MSG: %[tid=136]: <?xml version="1.0" encoding="UTF-8" standalone="yes"?>   false   false                                                                                                                          
    9: BS3206: Aug 01 2011 01:19:48.312 -0100: %NAM-6-INFO_MSG: %[tid=136]: Invalid development version of configuration file.
    10: BS3206: Aug 01 2011 01:19:48.312 -0100: %NAM-6-INFO_MSG: %[tid=136]: Opening file C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\system\/userConfiguration.xml ...
    11: BS3206: Aug 01 2011 01:19:48.312 -0100: %NAM-7-DEBUG_MSG: %[tid=136]: <?xml version="1.0" encoding="UTF-8"?> Local networks true true
    12: BS3206: Aug 01 2011 01:19:48.312 -0100: %NAM-6-INFO_MSG: %[tid=136]: Opening file system/internalConfiguration.xml ...
    13: BS3206: Aug 01 2011 01:19:48.312 -0100: %NAM-7-DEBUG_MSG: %[tid=136]: <?xml version="1.0" encoding="UTF-8"?>
    6: BS3206: Aug 01 2011 01:19:48.296 -0100: %NAM-7-DEBUG_MSG: %[tid=1812]: CoreLib:TRACE: context=ace, thread exec, ThreadImpl.cpp:74, m003FDD18, err=0(OS_OK), thread_id=152
    14: BS3206: Aug 01 2011 01:19:48.406 -0100: %NAM-6-INFO_MSG: %[tid=1812]: Successfully initialized SAE Ver: 3.0.1047.0 (Mar 23 2011 16:26:07)
    15: BS3206: Aug 01 2011 01:19:48.406 -0100: %NAM-6-INFO_MSG: %[tid=1812][comp=SAE]: API (0) AC NAM Auth Version: 3.0.1047.0
    16: BS3206: Aug 01 2011 01:19:48.453 -0100: %NAM-7-DEBUG_MSG: %[tid=1812]: CoreLib:TRACE: context=ace, thread exec, ThreadImpl.cpp:74, m0142EBF0, err=0(OS_OK), thread_id=264

Maybe you are looking for

  • HP Laserjet 1018 Alert on Support Site

    When searching for updated drivers for our office printers I noticed that there was a Alert out for 1018 printers. I searched and could no find anything, also called HP and they were not able to tell me anything beside the fact that it is no longer a

  • ABAP and HR-ABAP

    Dear All, My self is Chandra Gopal, I have 3 yrs of core HR exp and good knowledge on ABAP also. I would like to take HR-ABAP course from MKT. Could you please give me your suggesion on this. I don't have Technical background education. I  just compl

  • Uninstalling creative suites 4 - with error messages

    Hey.  I need help.  I got a new imac so I was transfering all my infor from my old macbook pro to the new one (took 40 plus hours!).  I go to edit some photos and when I go to open some there is an error message that pops up saying "Fatal error - mis

  • Gantt chart shows points only

    Hi, we are developing a Gantt chart in an ABAP webdynpro. The chart is not a problem, however only points are being displayed, not bars - as expected. The same problem was described for J2EE webdynpros. Unfortunately, the way it was solved there does

  • How do you delete the saved sites

    I deleted browser history and cache. but the sites are still there. thanks