Anyconnect won't connect if client version is older than version on ASA
Hi,
I read, that could be possilbe to connect with older version of Anyconnect than is in ASA box.
If I disable auto-update in the profile, update is not forced to client but client with older SW won't connect to ASA with following error:
And in the syslog is no specific message or error.
If the SVC version on the client is equal or newer than on ASA, everything is OK.
Question is, it is working to anyone?
Thanks.
Hi Jan,
did you change
true
in the file AnyConnectLocalPolicy.xml located in
C:\Documents and Settings\All Users\Application Data\Cisco\Cisco AnyConnect VPN Client ?
Maybe you need to install the xml-profile from the asa into the profiles folder as well.
(German FAQ: http://www.lrz.de/fragen/faq/vpn/vpn39/)
regards,
Markus
Similar Messages
-
AnyConnect won't download to client PC
I have an ASA5510 ver 8.2(1)1
I have configured two anyconnect VPNS. I have enabled both clientless and svc mode on both. The clientless works. They can conenct to the webpage and access plugins and access hosts on the internal network.
however the software wont download. and if I install the anyconnect client manually I can't even connect then. Depending on the version fo client I get either "Anyconnect is not enabled" or Can't start secure Desktop.
Any work aorund for this?
Config:
group-policy mypol_vpn_policy internal
group-policy mypol_vpn_policy attributes
dns-server value 10.x.x.x
vpn-filter value mypol_VPN_ACCESS_ACL
vpn-tunnel-protocol svc webvpn
split-tunnel-network-list value mypol_Split_Tunnel
address-pools value mypool_Pool
webvpn
http-proxy disable
svc keep-installer installed
svc ask enable default svc
customization value mypol
tunnel-group mypol_vpn_policy type remote-access
tunnel-group mypol_vpn_policy general-attributes
default-group-policy mypol_vpn_policy
tunnel-group mypol_vpn_policy webvpn-attributes
group-alias mypol enable
group-url https://xxx.com/mypol enable
files in flash:
csd_3.6.3002-k9.pkg
anyconnect-dart-win-2.4.1012-k9.pkg
any ideas please?Unfortunately i tired that, but the ocmmand is nto available:
ASA(config)# webvpn
ASA(config-webvpn)# anyconnect enable
^
ERROR: % Invalid input detected at '^' marker.
ASA(config-webvpn)# ?
WebVPN commands:
anyconnect-essentials Enable/Disable AnyConnect Essentials
apcf Load Aplication Profile Customization Framework (APCF)
profile
auto-signon Configure auto-sign to allow login to certain
applications using the WebVPN session credentials
cache Configure WebVPN cache
certificate-group-map Associate a tunnel-group with a certificate map rule
character-encoding Configures the character encoding for WebVPN portal
pages
csd This specifies whether Cisco Secure Desktop is enabled
and the package file name to be used.
default-idle-timeout This is the default idle timeout in seconds
default-language Default language to use
dtls Configure DTLS for WebVPN
enable Enable WebVPN on the specified interface
error-recovery Contact TAC before using this command
exit Exit from WebVPN configuration mode
file-encoding Configures the file encoding for a file sharing server
help Help for WebVPN commands
http-proxy This is the proxy server to use for HTTP requests
https-proxy This is the proxy server to use for HTTPS requests
internal-password Adds an option to input a different password for
accessing internal servers
java-trustpoint Configure WebVPN java trustpoint
keepout Shows Web page when the login is disabled
memory-size Configure WebVPN memory size. CHECK MEMORY USAGE
BEFORE APPLYING THIS COMMAND. USE ONLY IF ADVISED BY
CISCO
no Remove a WebVPN command or set to its default
onscreen-keyboard Adds WebVPN onscreen keyboard for typing password on
the WebVPN logon page and internal pages requiring
authentication
port WebVPN should listen for connections on the specified
port
port-forward Configure the port-forward list for WebVPN
proxy-bypass Configure proxy bypass
rewrite Configure content rewriting rule
smart-tunnel Configure a list of programs to use smart tunnel
sso-server Configure an SSO Server
svc This specifies whether the SSL VPN Client is enabled
and the package file name to be used.
tunnel-group-list Configure WebVPN group list dropdown in login page -
IPod won't connect with new version of iTunes
After I downloaded the latest version of iTunes, my device wouldn't connect to my computer. After extensive troubleshooting, I have found that my iPod does not respond to the latest version of iTunes. When I un-install iTunes, my iPod connects. When I try re-installing, it will disconnect. I downloaded an older version of iTunes, and it stayed connected. However, when I went to open iTunes, a pop-up came up and said it couldn't open because my library was updated by a newer version. So, I'm at a loss of what to do. Someone please help! Thanks in advance!
Did you try simply downloading the latest version of iTunes using the link below and then installing it on top of the older version?
http://www.apple.com/itunes/download/
B-rock -
Macbook won't connect wirelessly on home network
Hey guys,
I see that a lot of you are having the same issue I am. I have a Macbook that I got the summer of 2008. Up until Thursday, it would connect wirelessly to my E-wire router and network just fine. Then it quit. Later that night, I went up to school for a class, and it connected just fine to the wireless network up there, but will not connect wirelessly to my home network. I have since gotten a new router (Netgear) and reconfigured everything (again), including security and all updates. Airport shows that I am connected to my network, and I can load web pages when I am plugged into the router via ethernet cable (as I am now) but when I try to launch Mozilla or Safari wirelessly, I get the "Server cannot be found" error message.
I am connected to my network, I have tried shutting off Airport and restarting it, as well as quitting my browser and reopening it, and rebooting my Macbook all together. And I also went in and manually entered my IP address, which is what allowed me to connect to the network via ethernet cable in the first place.
Any theories why my Macbook (which is newer) won't connect wirelessly whereas my roommates older Macbook doesn't have any issue connecting wirelessly from right next to me? And I know that it's not an issue of too many people trying to be on the network at once, since it's just the two of us at most, and I'm the only one here right now.
Any thoughts or suggestions would be appreciated.Is your router a model that supports a/b/g/n? If you turn off N will it work? If your N is setup at 40MHz slots it may not work as well. Can you take your wireless router somewhere else for testing? I assume you might have some issue where you are at with your Mac and that router. When you open Apple Menu/About this Mac/More Info../Network/Airport does it show your network there? From a working machine can you see your Mac from your router web interface? FYI if your router was an Apple product(Airport Express or Airport Extreme/Time Capsule) you could see all your wireless clients via the Airport Utility, even signal strength and connection speed...
-
Hiee,
I am using cisco anyconnect secure mobility client, version - 3.1.05170 , in my windows 8.1 PC to access vpn to my office desktop. But as soon as i connect cisco anyconnect client, my wifi networks becomes limited or unavailable. Thus, i am not able to get remote access to my office desktop. And not even able to access any other websites also. But as soon as i disconnect from the cisco anyconnect vpn client, every thing becomes normal, and the exclamation mark from the network icon also disappears.
kindly help me in this regard.
Thanks and regards
NeerajThere are a few things to consider here:
- The IPSec VPN client is EoL, so even if we consider this as a bug, it wouldn't be fixed
- fixing the file server access would break the DHCP renew which means there is no completely clean way to fix this, at least not at the IP level since the client can't route to the same destination using 2 different paths.
Is there any chance we could do a static policy NAT for the DHCP traffic so it appears to come from another IP? It's twisted and it may not work (the client might use the DHCP server IP embedded inside the payload and not the source IP) but if it does, then we'd fix the overlap.
Could the server use another IP address for the DHCP service (much like using a loopback for a certain service on a router?)
A third solution would be to NAT the destination server IP on the ASA for traffic from the IP pool going to the server. We'd need DNS doctoring as well to resolve the server's name to the NATted IP. This way the server would appear from the VPN client as being at a different IP, thereby fixing the overlap.
All these potential solutions are quite involved... you may be better off wityh a simpler design: splitting of your server into 2 or using something else to do DHCP for the VPN clients. -
I need to split the load of my WSUS on to another site because the amount of computers is straining the internet connection in the amount of uploads performed.
However I'm having an issue at the second WSUS where only Windows 7 and Server 2003 clients will update...
Windows 8.1 and Server 2008 and Server2012 won't update giving the following error codes: 8024400A and 80072EE2
The WSUS is a Server 2012 with Local Update Publisher 1.1 installed. It works fine locally at the site but not across our WAN.
The clients appear in the WSUS console but fail to check for updates.
I've tried it with the firewall turned off...
Both WSUS servers are using Microsoft SCEP 2012.
Has anyone out there experienced this? Or have any suggestions to fix?
Cheers.Hi there,
I spoke too soon, I think I got one Windows 8 client to update yesterday by fluke. Now today it won't.
There's not much different between the W7 and W8 systems they both use the same antivirus. Same software but updated on W8.
Here is the windows update.log:
2014-06-05 10:44:14:561
976 954
Misc =========== Logging initialized (build: 7.9.9600.17093, tz: +1000) ===========
2014-06-05 10:44:14:639
976 954
Misc = Process: C:\Windows\system32\svchost.exe
2014-06-05 10:44:14:639
976 954
Misc = Module: c:\windows\system32\wuaueng.dll
2014-06-05 10:44:14:561
976 954
Service *************
2014-06-05 10:44:14:639
976 954
Service ** START ** Service: Service startup
2014-06-05 10:44:14:639
976 954
Service *********
2014-06-05 10:44:15:311
976 954
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2014-06-05 10:44:15:311
976 954
Agent * WU client version 7.9.9600.17093
2014-06-05 10:44:15:326
976 954
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2014-06-05 10:44:15:326
976 954
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-06-05 10:44:15:326
976 954
Agent * Access type: No proxy
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-06-05 10:44:15:326
976 954
Agent * Network state: Connected
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-06-05 10:44:16:123
976 954
Agent *********** Agent: Initializing global settings cache ***********
2014-06-05 10:44:16:123
976 954
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-06-05 10:44:16:123
976 954
Agent * WSUS server: http://10.155.194.59:8530
2014-06-05 10:44:16:123
976 954
Agent * WSUS status server: http://10.155.194.59:8530
2014-06-05 10:44:16:123
976 954
Agent * Target group: Test Group
2014-06-05 10:44:16:123
976 954
Agent * Windows Update access disabled: No
2014-06-05 10:44:16:170
976 954
WuTask WuTaskManager delay initialize completed successfully..
2014-06-05 10:44:16:170
976 954
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-06-05 00:24:13, not idle-only, not network-only
2014-06-05 10:44:16:170
976 954
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-06-05 05:36:25, not idle-only, not network-only
2014-06-05 10:44:16:170
976 954
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2014-06-05 05:36:25, not idle-only, not network-only
2014-06-05 10:44:16:170
976 954
Report CWERReporter::Init succeeded
2014-06-05 10:44:16:170
976 954
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-06-05 10:44:16:170
976 954
DnldMgr Download manager restoring 0 downloads
2014-06-05 10:44:16:170
976 954
AU ########### AU: Initializing Automatic Updates ###########
2014-06-05 10:44:16:170
976 954
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-06-05 10:44:16:170
976 954
AU AIR Mode is disabled
2014-06-05 10:44:16:170
976 954
AU # Policy Driven Provider: http://10.155.194.59:8530
2014-06-05 10:44:16:170
976 954
AU # Detection frequency: 22
2014-06-05 10:44:16:170
976 954
AU # Target group: Test Group
2014-06-05 10:44:16:170
976 954
AU # Approval type: Scheduled (Policy)
2014-06-05 10:44:16:170
976 954
AU # Auto-install minor updates: Yes (Policy)
2014-06-05 10:44:16:170
976 954
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Scheduled)
2014-06-05 10:44:16:170
976 954
AU # Will interact with non-admins (Non-admins are elevated (Policy))
2014-06-05 10:44:16:186
976 954
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070032
2014-06-05 10:44:16:186
976 954
AU AU finished delayed initialization
2014-06-05 10:44:16:202
976 954
AU Adding timer:
2014-06-05 10:44:16:202
976 954
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-06-05 03:47:12, not idle-only, not network-only
2014-06-05 10:44:16:217
976 99c
DnldMgr Asking handlers to reconcile their sandboxes
2014-06-05 10:45:17:562
976 954
AU ReAttemptDownloadsAsUserIfNecessary, No calls in download progress.
2014-06-05 10:45:31:453
976 778
IdleTmr Incremented idle timer priority operation counter to 1
2014-06-05 10:45:34:562
976 778
AU Triggering AU detection through DetectNow API
2014-06-05 10:45:34:562
976 778
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-06-05 10:45:34:562
976 778
AU Triggering Online detection (interactive)
2014-06-05 10:45:34:562
976 778
AU Adding timer:
2014-06-05 10:45:34:562
976 778
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-06-05 00:45:34, not idle-only, not network-only
2014-06-05 10:45:34:609
976 954
AU #############
2014-06-05 10:45:34:609
976 954
AU ## START ## AU: Search for updates
2014-06-05 10:45:34:609
976 954
AU #########
2014-06-05 10:45:34:609
976 954
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-06-05 10:45:34:609
976 954
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 15; does use network; is not at background priority
2014-06-05 10:45:34:609
976 954
IdleTmr Incremented idle timer priority operation counter to 2
2014-06-05 10:45:34:797
976 954
Report *********** Report: Initializing static reporting data ***********
2014-06-05 10:45:34:797
976 954
Report * OS Version = 6.3.9600.0.0.65792
2014-06-05 10:45:34:797
976 954
Report * OS Product Type = 0x00000004
2014-06-05 10:45:34:813
976 954
Report * Computer Brand = Microsoft Corporation
2014-06-05 10:45:34:813
976 954
Report * Computer Model = Virtual Machine
2014-06-05 10:45:34:813
976 954
Report * Platform Role = 1
2014-06-05 10:45:34:813
976 954
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-06-05 10:45:34:813
976 954
Report * Bios Revision = 090004
2014-06-05 10:45:34:813
976 954
Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
2014-06-05 10:45:34:813
976 954
Report * Bios Release Date = 2009-03-19T00:00:00
2014-06-05 10:45:34:813
976 954
Report * Bios Sku Number unavailable.
2014-06-05 10:45:34:813
976 954
Report * Bios Vendor = American Megatrends Inc.
2014-06-05 10:45:34:813
976 954
Report * Bios Family unavailable.
2014-06-05 10:45:34:828
976 954
Report * Bios Major Release unavailable.
2014-06-05 10:45:34:828
976 954
Report * Bios Minor Release unavailable.
2014-06-05 10:45:34:828
976 954
Report * Locale ID = 3081
2014-06-05 10:45:35:578
976 954
Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-06-05 10:45:35:609
976 954
AU <<## SUBMITTED ## AU: Search for updates [CallId = {CDA6DEA2-9874-4DB5-AAA7-9A05D933C012} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-06-05 10:45:35:609
976 fc4
Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-06-05 10:45:35:609
976 fc4
Agent *************
2014-06-05 10:45:35:609
976 fc4
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-06-05 10:45:35:609
976 fc4
Agent *********
2014-06-05 10:45:35:609
976 fc4
Agent * Online = Yes; Ignore download priority = No
2014-06-05 10:45:35:609
976 fc4
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-06-05 10:45:35:609
976 fc4
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-06-05 10:45:35:609
976 fc4
Agent * Search Scope = {Machine & All Users}
2014-06-05 10:45:35:609
976 fc4
Agent * Caller SID for Applicability: S-1-5-21-1323361640-3159480285-1943353560-1532
2014-06-05 10:45:35:609
976 fc4
Agent * RegisterService is set
2014-06-05 10:45:35:625
976 fc4
EP Got WSUS Client/Server URL: "http://10.155.194.59:8530/ClientWebService/client.asmx"
2014-06-05 10:45:35:641
976 fc4
Setup Checking for agent SelfUpdate
2014-06-05 10:45:35:641
976 fc4
Setup Client version: Core: 7.9.9600.17093 Aux: 7.9.9600.17093
2014-06-05 10:45:35:641
976 fc4
EP Got WSUS SelfUpdate URL: "http://10.155.194.59:8530/selfupdate"
2014-06-05 10:45:35:672
976 fc4
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-06-05 10:45:35:734
976 fc4
Misc Microsoft signed: NA
2014-06-05 10:45:35:734
976 fc4
Misc Infrastructure signed: Yes
2014-06-05 10:45:35:734
976 fc4
Misc WARNING: Cab does not contain correct inner CAB file.
2014-06-05 10:45:35:734
976 fc4
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-06-05 10:45:35:734
976 fc4
Misc Microsoft signed: NA
2014-06-05 10:45:35:750
976 fc4
Misc Infrastructure signed: Yes
2014-06-05 10:45:35:766
976 fc4
Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-06-05 10:45:35:766
976 fc4
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-06-05 10:45:35:907
976 fc4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
--continued-- -
Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072
I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
I am able to create the VPN connection but the connection will not allow data to be transferred.
Stats from a manual connection:
Cisco AnyConnect Secure Mobility Client Version 3.1.04072
VPN Stats
Bytes Received: 14375
Bytes Sent: 0
Compressed Bytes Received: 0
Compressed Bytes Sent: 0
Compressed Packets Received: 0
Compressed Packets Sent: 0
Control Bytes Received: 0
Control Bytes Sent: 0
Control Packets Received: 0
Control Packets Sent: 0
Encrypted Bytes Received: 7820
Encrypted Bytes Sent: 1207
Encrypted Packets Received: 9
Encrypted Packets Sent: 3
Inbound Bypassed Packets: 0
Inbound Discarded Packets: 0
Outbound Bypassed Packets: 0
Outbound Discarded Packets: 0
Packets Received: 4
Packets Sent: 0
Time Connected: 00:03:01
Protocol Info
Inactive Protocol
Protocol Cipher: RSA_3DES_168_SHA1
Protocol Compression: None
Protocol State: Disconnected
Protocol: DTLS
Active Protocol
Protocol Cipher: RSA_3DES_168_SHA1
Protocol Compression: Deflate
Protocol State: Connected
Protocol: TLS
OS Version
Windows 8 : WinNT 6.2.9200
Log from the data transmission software:
24/12/2013 12:51:13 - Application version = 1.11.28.0
24/12/2013 12:51:13 - Lodgement Library Version = 1.11.28.0
24/12/2013 12:51:13 - Connection Method = INTERNET
24/12/2013 12:51:13 - DIS Connection Type = Automatic
24/12/2013 12:51:13 - VPN Client = ACTIVE
24/12/2013 12:51:13 - Check Available Connections = NOT ACTIVE
24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
24/12/2013 12:51:13 - Language: English (Australia)
24/12/2013 12:51:13 -
24/12/2013 12:51:13 - Connected to ISP via LAN
24/12/2013 12:51:13 - Checking for presence of VPN client.
24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
24/12/2013 12:51:18 -
24/12/2013 12:51:18 - Checking Cisco AnyConnect version.
24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc. All Rights Reserved.
24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Initializing the VPN connection.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
24/12/2013 12:51:23 - Authenticating user.
24/12/2013 12:51:23 - Connected to VPN concentrator.
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Checking for profile updates...
24/12/2013 12:51:23 - Checking for product updates...
24/12/2013 12:51:23 - Checking for customization updates...
24/12/2013 12:51:23 - Performing any required updates...
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
24/12/2013 12:51:24 - Establishing VPN - Examining system...
24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
24/12/2013 12:51:24 - Establishing VPN - Configuring system...
24/12/2013 12:51:24 - Establishing VPN...
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connection to VPN client return code = 0.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
Connection timed out.
24/12/2013 12:51:46 -
24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
24/12/2013 12:51:46 - Disconnect in progress, please wait...
24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
24/12/2013 12:51:47 - Detached.
24/12/2013 12:51:47 - Disconnected from VPN concentrator.
24/12/2013 12:51:47 - *****************************************************
24/12/2013 12:51:47 - END OF LODGEMENT PROCESS
24/12/2013 12:51:47 - *****************************************************
Issue history:
- Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
- Upgrade to Windows 8.1 stopped the VPN client working
- Refreshed system back to Windows 8 and reinstalled all software
- Cisco VPN client would not install on system
- Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
- Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
- Data transmission software returns error code #10060
Any assistance would be greatly appreciated.anyone found the fix for this?
-
Financial Reports Client - 11.1.2.1 - Won't connect via VPN only?
When I try and connect via VPN only. I get: You are not authorized to use this functionality. Contact your administrator.
Here's the log from client. We have ensured the client version matches the server version exactly. Funny as when I'm directly on their network I can connect just fine. Hoping this log will point to solution.
Log:
[2012-06-01T10:31:45.196-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JUcTOpZD4io5KVt1ie1FmD9H000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
[2012-06-01T10:31:45.273-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JUcTOpZD4io5KVt1ie1FmD9H000000,0] [SRC_CLASS: com.hyperion.reporting.javacom.HsServer] [SRC_METHOD: getServer] [[
java.lang.NullPointerException
at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
]]I think you have already posted this problem on another post, I said it is possible it could be a ports issue.
Have a look at the following http://www.oracle.com/technetwork/middleware/bi-foundation/epm-component-communications-11121-354680.xls
Select FR studio as the client and it should give indication to the ports that need to be opened.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanksYou are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.
oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-
-
I have a Macbook Air running OS-X Yosemite and an iPhone 5s running IOS version 8.1. Every time I try to connect the devices via bluetooth is won't connect saying my Macbook Air isn't supported when in actuality it is. Anyone know how to fix this issue? I have restarted both my Mac/Iphone and have turned bluetooth on/off and nothing seems to help. Bluetooth pairing didn't work before I updated to IOS 8.1 so I doubt that is the issue here.
Pairing an iPhone to a computer (Mac or Windows) is only supported for personal hotspot (sharing the iPhone's cellular internet connection) and then only if your cellular plan supports it. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?
-
Just downloaded ios 7. Now my iphone won't connect to iTunes. It says I need Itunes 11. However, I'm running OS 10.5.8 which ITunes 11 doesnt recognize. Any suggestions other than buying a new Mac?
Upgrade your Mac to OS X "Snow Leopard". You need an Intel Mac (no PowerPC).
Purchase Snow Leopard from Apple:
Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store
Apple's price is $19.99, £14.00, €18.
Once installed run Software Update which will update OS X to version 10.6.8. You can then download and install iTunes 11. -
Won't connect to the Mac version of Desktop Manager
I have a blackberry 8520 v 4.6.1.314 (platform 4.2.0.135). It used to connect to the desktop manager, but now it won't connect at all.
The desktop manager reads the cellphone type just fine (on the screen it reads the name (my name), the cellphone type, the PIN number, and how much space my media card has left) but if I click the icon on the upper-left side of the screen, it says that my cellphone is not connected. The back-Up, Restore, and Sync buttons are all greyed.
How do I fix this? It used to be just fine a couple of months ago, and I never changed anything on my blackberry. -- in short, it has the same condition as it was before, when everything was a OK.
PS: My Mac version of the Blackberry Desktop Manager is the newest version.Did you try a hard reset? ( phone powered on / remove battery / replace 15 seconds later and wait for reboot)
Did this work?
If not, make sure you have mass storage mode enabled on your device:
To enable mass storage mode complete the following steps:
Connect your BlackBerry smartphone to your computer.
From the Home screen of the BlackBerry smartphone, click Options > Media Card or Memory, or click Options > Advanced Options > Media Card(depending on which BlackBerry® Device Software version you are running).
Press the Menu key and change Mass Storage Mode Support to On.
To enable Mass Storage Mode automatically every time you connect, scroll down to Auto Enable Mass Storage Mode when Connected and change it to Yes.
Press the Menu key and click on Save.
Enter your BlackBerry smartphone password and click Enter (if prompted).
more info
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB13564&slic...
>>>>>>>>>>>>>>>>>>>>>>>>~
Hope I was able to help
If you have received information that has helped you out, please give them Kudos.
If your problem has been solved, please click on the post that resolved the issue -
I installed the latest version of iTunes on my Windows XP. I can launch it but it won't connect to the store because it says I don't have a network connection but I do because I'm on the internet right now! Help!
The requirement shoul be on the box the iphone came in. they are also on the website
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)" -
Performed Jukebox Driver Upgrade version 1.30.03 now computer won't connect to Zen To
I installed "Creative Zen and Jukebox Driver Upgrade version .30.03" and now computer won't connect to Zen Touch
Any thoughts or ideas on why this happened or how to fix it'sI've seen someone else mention this also.
Do you still have your install CD? You can try installing the drivers from here.
Maybe you are looking for
-
I am connected via airport extreme wifi, should I be hard wired?
-
Link style sheet to .html file?
Hey dreamweaver community i'm really new to dreamweaver but have a slight grasp. But i am creating a website (ethicistbeats.com). I have a design by using a css. style sheet and everything looks good in dreamweaver safari preview (on a mac), but when
-
Hi, There is an ABAP program step in a job. The program uses a variant which is having date. The attribute for the date field is RS_VARI_V_TODAY which would give currrent date. But the thing is when the job is manually run, the date is not provided a
-
Files added to server take time to show for other users
Various users add files to server and other users with folder access cannot see files for sometimes up to 2 hours before the files appear. It is not a rights issues as when the file final appear in the directory they can access the file and use.
-
What happened to my Photoshop after todays update??
It used to be so easy.... click on the pixel layer's thumbnail and you're editing the pixels, click on the mask and you edit the mask... USED to be easy. Now today, after the update, click on the pixel layer's thumbnail and you're editing the pixels,