Anyone check A2DP support in 1.1.4?

Anyone with the Motorola S9 or similar device check out A2DP support? Thanks in advance.

Anyone who really wants to use the MotoRokr S9 BT Stereo headphones, should check out this device I purchased (Motorola TenTechnology NaviPlay). It works well with the iphone, despite having to attach a seperate device. I use it for everything including calls, and the quality is impressive both for music and calls. The trick to it is during the initial sync to the phone, then to the adapter. The best approach to using the dongle correctly for calls and music, is to 1st sync the headset to the phone for standard function. Next, plug in the adapter, answer no the the Error Message about no support, then put the device and headset in sync mode, and wait for the dongle to flash fast green. When both the phone and the device is connected to the headset, all the controls on the S9 work well. Now the next time you goto use the dongle, before connecting it turn on the S9, let it autosync to the phone, then plugin and turn on the dongle, answer no again to the error msg, and wait for the dongle to autosync to the S9. In essence, you only really need to sync the S9, iPhone and dongle once, as all 3 devices keep memory of previously synced devices, but don't forget to let the S9 sync to the phone 1st, before connecting and powering on the dongle

Similar Messages

  • A2DP Support

    I am new to this forum so excuse my ignorance. I purchased a stereo headset motorola s9 before I realized that the iphone will not support A2DP yet. One of the reasons I bought the phone. The motorola will not play music over the headset. I have found a work around with a sony bluetooth adapter. The adapter of course takes battery power from the phone and the volume levels are what I would consider marginal. Does anyone know when or if apple plans on supporting A2DP and when? I paid good money for the phone and now for the adapters, headset, ect... and really think a legitimate answer wouldn't be too much to ask.

    Welcome to the forums!
    Unfortunately, as we are all end users here there is no way for anyone to know when or if Apple plans to implement A2DP support on the iPhone. Apple never comments to these posts so the answer you won't get the answer you seek here. Likewise, Apple rarely announces feature enhancements before an upgrade so it is unlikely you will get an answer from them either.
    While I understand your frustration about the lack of this feature, Apple never promoted the iPhone as having stereo blue tooth capabilities. The fact that you paid good money on the phone before you did a solid search of its feature set is just a lesson learned.

  • Nokia N91 8GB A2DP support 3rd Party Stereo Bluet...

    Hi...
    Can Anyone confirm that does Nokia N91 8GB's A2DP(stereo Bluetooth) support 3rd Party software Stereo Bluetooth Sound? like
    LCG Jukebox, Smartmovie , Power Movie etc...
    N73/N73ME A2DP does not support 3rd party apllication (LCG Jukebox,Powermoive etc)bluetooth stereo sound.But The set (N73/73ME)A2DP support only default music,video player(real player)stereo Bluetooth.
    I want to know real things abt Nokia N91 8GB A2DP with 3rd party software..

    I have a Nokia N73 and a Parrot MKi9000. I wanted to use the Internet Radio application to listen to streaming radio via bluetooth AD2P connection. Nokia N73 firmware updated last, supports this standard, but only for applications installed directly with the operating system: (Standard Media Player and RealPlayer).
    If you start only "Internet Radio" sound does not pass through the bluetooth connection, but I noticed that also enable the media player to hear the sum of the two sounds.
    The solution I found is that of creating an MP3 file of about 30 minutes with a background of ambient music very low (not too much else if there is total absence of sound, such as interruptions in the buffer, the system soon after it disconnects). I set the standard player so that will loop through the MP3 in the background.
    Then I turned on the application "Internet Radio" and select the station to play. Once started streaming the music you hear on the car speakers.
    I think this trick may be useful not only to listen to the radio via the internet, but also for other applications that do not activate by default bluetooth AD2P streaming and other Nokia devices, or other Bluetooth hands-free systems.
    Ciao

  • A2DP Support for Nokia ASHA

    I am so disappointed by the recent Nokia ASHA phones with keypads (non-touchscreens). I could not believe that none of these phones supported A2dp, and what's baffling is that most websites and blog sites would say that these phones would have A2DP support, but it really does not have. I have a Philips SHB 9100 bluetooth stereo headset, and it's disappointing that I wasted money in buying these two phones below:
    1. I bought Nokia 112. It's a great small classic phone that is not fancy looking. It has bluetooth 2.1, edge, and dual sim. But even though it has bluetooth, it doesn't support A2dp. I sold Nokia 112 for 40% less it's original price, even though I bought it on the same day.
    2. . I then bought NOKIA ASHA 206, hoping that this will have A2dp, but it doesn't have! I'm surprised. So I sold it too.
    3. I decided to check on Nokia Asha 202 before buying it, but I'm surprised it also doesn't have A2dp.
    Are there still basic phones out there that support A2dp? I have a Nokia Xpress Music 5320, it's small and it has A2dp!

    The Nokia 301 supports A2DP 1.2
    http://www.developer.nokia.com/Devices/Device_specifications/Nokia_301/

  • HT5787 What do I do if my iPod was stolen and I checked my support profile and when I entered the serial # I got a message saying it has been registered to another Apple ID? Is there a way to find out that Apple ID so that we can locate the iPod?

    What should I do if my iPod has been stolen and when I checked my support profile and entered my serial # and I received a message that the serial # had been registered to another Apple ID account? Is there a way to find out the Apple ID that it was registered to? I have already checked find my iPod and it shows my iPod is offline. I have already filed a police report.

    No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
    Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
    Regards.

  • No A2DP support for Nokia N80!

    I just wonder why Nokia can't add support for A2DP in the new firmware for Nokia N80ie cellphone. =(
    I just uppdatet my phone in hope of getting somewhere,but it was pointless.
    It would be pretty nice if i could use my N80 as a real media centre with my Jabra BT 620s bluetooth headset but no way.
    I am just intrested why not, i have read som discussions in this forum and other N phones did get their uppdates with A2DP support . Or am i wrong. Am i doing somethig wrong and cant get this to work?

    A2DP and AVRCP does not require additional hardware for bluetooth 1.2 and above. It is based purely on software simulation.
    Nokia can support A2DP in nokia n80. but battery could be an issue. Initial prototype of N80 had bluetooth 2 but then it was downgraded to 1.2 !!!

  • Does A2DP support in leopard mean A2DP driver for Vista on MBP?

    Would love to have A2DP bluetooth support for my MBP, and I know it's coming next month. Also next month in leopard is the official release of Boot camp and therefore I should imagine a full bunch of windows drivers for the MBP. My question is, if they are bunging A2DP support into leopard do you think the bluetooth drivers written for windows will also include it? I mainly run Vista on my MBP (not out of choice, but you try getting Visual Studio to run on OSX).

    The Nokia 301 supports A2DP 1.2
    http://www.developer.nokia.com/Devices/Device_specifications/Nokia_301/

  • Anyone from customer support: i just installed my CS 5.5 creative suite design premium and everythin

    installation support needed: i just installed my CS 5.5 creative suite design premium and everything installed except the Flash catalyst CS 5.5 any suggestions? i am ready to upgrade to CS 6 and SUBSCRIBE to cloud.  anyone from Adobe support or elsewhere please repy - i am a registered user. thanx in advance

    greetings
    hmmm... was sent the CS 5.5 cds to install for upgrade from CS4 ......
    2. enclosed is the error message from installion dialogue box...  any suggestions?
    exit code 6:
    Adobe flash catalyst CS5.5 901 mb did not install
    0 fatal errors 3 errors  2warnings:
    payload {DEA79551-23E3-430A-9B15-B544479BDB2} Flash player  10.2.153.1
    warning: DF009 - higher version plug in already exists at: /Library/internet/plug-in/flashplayer.plugin(seq48)
    warning: DF010  not installing plugin to :/Library/internet/plug-in/flashplayer.plugin(seq48)
      payload{50491591-A44F-429E B7C8-87EO3FECFD78} Adobe Flash Catalyst CS5.5 1.5.0.0
    error DS001  Failed to mount the disk image at Volume 1CS 5_5DesignPrm1/AdobeCS5.5
    Design Premium/payloads/AdobeFlashCatalyst-mul/AdobeFlashCatalyst-mul.dmg please verify that the disk image is not corrupt.
    Error: DW050: the following payload errors ere found during install
    Error: DW050: Adobe Flash Catalyst CS5.5 install failed

  • After I tried to update my ipod to iOS 5, my ipod screen turned to the screen of the cherger cord pointing to the iTunes symbol. when I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes  and i did download t

    After I tried to update my iPod 4 to iOS 5, my screen turned to the USB cord pointing to the iTunes symbol. When I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and I did download the latest version of iTunes (11.1.1). I tried to restore it again and the same error occured. I dont understand half of the instructions for the resolution of the 3014 error code so I did the instructions that I understood and nothing has changed. Please tell me how I can fix it.

    Just what do you not understand?
    Did you try:
    Try to restore from another known-good computer and network.
    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How can I check to support specific JSRs using standard API?

    Hi all.
    How can I check to support specific JSRs?
    I'd like to know supporting of following JSRs on VM.
    1. JSR-75 (FileSystem and PIM API)
    2. JSR-120 (WMA)
    3. JSR-135 (MMAPI)
    4. JSR-211 (CHAPI)
    5. JSR-184 (M3G)
    and so on...
    Thanks.
    Message was edited by:
    WhiteBear

    Answer myself.
    It was possible using System.getProperty().
    In case of supporting a FileConnection,
    Return value of System.getProperty("microedition.io.file.FileConnection.version")
    should be "v1.0" or similar value.
    Thanks.

  • [svn] 3219: Checking in support for Network Monitor in rpc.swc

    Revision: 3219
    Author: [email protected]
    Date: 2008-09-16 01:33:39 -0700 (Tue, 16 Sep 2008)
    Log Message:
    Checking in support for Network Monitor in rpc.swc
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/DirectHTTPChannel.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractInvoker.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractOperation.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/AbstractOperation.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPService.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/Operation.as
    Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/NetworkMonitor.as

    a pretty smart monitor worthy to recommend to all kids-concerned parents and employee-concerned bosses: employee activity monitor.
    Learn morefrom here:
    www.employee-activity-monitor.com

  • Is anyone from Apple Support reading these questions regarding Numbers for IOS crashing?

    Is anyone from Apple Support reading these questions regarding Numbers for IOS crashing?

    This is a user – user forum.
    Leave Apple feedback here: https://www.apple.com/feedback/numbers_ios.html

  • Mirror server missing file.... does anyone check this stuff?

    I just came across a problem with a repo mirror....
    pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    error: cannot resolve "libjpeg>=7", a dependency of "ffmpegthumbnailer"
    error: failed to prepare transaction (could not satisfy dependencies)
    :: ffmpegthumbnailer: requires libjpeg>=7
    Seemed odd to me as libjpeg was updated to 7 several days ago.
    pacman -Q libjpeg
    libjpeg 6b-6
    ???? So extra is up to date but I still have an old libjpeg.
    I live in Thailand and decided to use the Australian mirrors. I checked on the first server in my mirrorlist,
    Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686, and saw that libjpeg is absent from Extra. Not even an old version, just totally missing!
    Ok, the solution is simple.... use another mirror.
    But clearly this is a pain is the a$$. How can one know which servers are reliable and up to date?
    Does anyone check this stuff? Perhaps a script could be run that checks the contents of the mirrors against the main server, and posts the results on the Arch website where users can check?
    Cheers, Renners

    jwwolf wrote:http://users.archlinux.de/~gerbra/mirrorcheck.html
    LoL, marvelous!

  • Lightroom 6 reports "Check OpenGL support: Failed"

    Lightroom 6 system info reports "Check OpenGL support: Failed".  I know that OpenGL is installed and working properly, since it passes all tests of OpenGL Extensions Viewer 4.1
    Any ideas?
    System:
    Lightroom version: 6.0 [1014445]
    License: Perpetual
    Operating system: Windows 7 Ultimate Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 16
    Processor speed: 3.5 GHz
    Built-in memory: 12189.7 MB
    Real memory available to Lightroom: 12189.7 MB
    Real memory used by Lightroom: 1020.9 MB (8.3%)
    Virtual memory used by Lightroom: 1048.0 MB
    Memory cache size: 495.8 MB
    Maximum thread count used by Camera Raw: 8
    Camera Raw SIMD optimization: SSE2,AVX,AVX2
    System DPI setting: 134 DPI
    Desktop composition enabled: No
    Displays: 1) 2560x1440
    Input types: Multitouch: No, Integrated touch: No, Integrated pen: No, External touch: No, External pen: No, Keyboard: No
    Graphics Processor Info:
    Check OpenGL support: Failed
    Vendor: ATI Technologies Inc.
    Version: 3.3.13293 Core Profile Context FireGL 14.502.1019.0
    Renderer: ATI FirePro V5800 (FireGL) Graphics Adapter
    LanguageVersion: 4.40

    Same issue here....
    Lightroom version: 6.0.1 [ 1018573 ]
    License: Perpetual
    Operating system: Windows 7 Home Premium Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 3.4 GHz
    Built-in memory: 16336.9 MB
    Real memory available to Lightroom: 16336.9 MB
    Real memory used by Lightroom: 514.2 MB (3.1%)
    Virtual memory used by Lightroom: 486.7 MB
    Memory cache size: 89.4 MB
    Maximum thread count used by Camera Raw: 4
    Camera Raw SIMD optimization: SSE2,AVX,AVX2
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 2560x1440
    Input types: Multitouch: No, Integrated touch: No, Integrated pen: No, External touch: No, External pen: No, Keyboard: No
    Graphics Processor Info:
    Check OpenGL support: Failed
    Vendor: ATI Technologies Inc.
    Version: 3.3.13283 Core Profile Context 14.501.1003.0
    Renderer: AMD Radeon HD 6670
    LanguageVersion: 4.40
    Application folder: C:\Program Files\Adobe\Adobe Lightroom
    Library Path: E:\My Pictures\LR5 Data Bkup\LR5 Master\LR5 Master-2.lrcat
    Settings Folder: C:\Users\Rick\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Behance
    2) Canon Tether Plugin
    3) Facebook
    4) Flickr
    5) Leica Tether Plugin
    6) Nikon Tether Plugin
    Config.lua flags: None
    Updated Toolkit: Adobe Camera Raw 9.0 for Lightroom 6.0 (build 1014445)
    Updated Toolkit: Book Module 6.0 (build 1014445)
    Updated Toolkit: Develop Module 6.0 (build 1014445)
    Updated Toolkit: Import Module 6.0 (build 1014445)
    Updated Toolkit: Library Module 6.0 (build 1014445)
    Updated Toolkit: Map Module 6.0 (build 1014445)
    Updated Toolkit: Monitor Module 6.0 (build 1014445)
    Updated Toolkit: Print Module 6.0 (build 1014445)
    Updated Toolkit: Slideshow Module 6.0 (build 1014445)
    Updated Toolkit: Web Module 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.AgNetClient 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.AgWFBridge 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.Headlights 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.LibraryToolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.MultiMonitorToolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.archiving_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.bridgetalk 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.catalogconverters 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.cef_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.coretech_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.curculio 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.discburning 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.email 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.export 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.ftpclient 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.help 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.iac 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.imageanalysis 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.layout_module_shared 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.pdf_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.sdk 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.sec 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.socket 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.store_provider 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.substrate 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.ui 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.video_toolkit 6.0 (build 1014445)
    Updated Toolkit: com.adobe.ag.xml 6.0 (build 1014445)
    Updated Toolkit: com.adobe.wichitafoundation 6.0 (build 1014445)
    Adapter #1: Vendor : 1002
      Device : 6758
      Subsystem : 318b1682
      Revision : 0
      Video Memory : 1008
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (4- Logitech USB Headset)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: Uninitialized
    Direct2DEnabled: false
    GPUDevice: not available
    OGLEnabled: true

  • How to check CPU support

    Wanting to upgrade with a new cpu or running into troubles after having already upgraded frequently the question comes up if the new cpu is supported by the board used.
    Before asking about that with a post you should for yourself by just going to your mainboard's product site at msi.com
    There just choose your board's category (AMD or Intel Platform) and click on your board's socket and choose your mainboard:
    Is your board already out of production and not mentioned you need to click Archive instead of Intel/AMD platform:
    In the following pop-up just enter the name of your board, click "search" and you will be directed to the archived product site:
    When you finally opened your board's product site click on "support" -> "cpu support" and all supported cpus will be listed as well as the bios version with which support for the cpu has been implemented
    Is your new cpu not listed there it is not officially supported which could result in all kinds of problems from just not recognising the cpu's name string to not booting at all. Buying an unsupported cpu is therefor a gamble and not recommended.
    If the new cpu is listed, you need to check if the bios installed on your board is supporting the cpu or you need to update. To figure out what bios version you have, >>use the MSI HQ Forum USB flasher<< if you want to upgrade a running system. After starting the MSI HQ Forum USB flasher it will automatically detect your board's current bios and save the details in a file on your desktop called MSIHQ_INFO.txt. There you can read up the exact bios version. Posting in a topic to get assistance you can quote this details to make it easier for others to help you
    If you have just the board you can look for a tiny green sticker on the bios chip that has the version of the original bios it came with printed on it.
    With new cpu generations coming up MSI usually creates microsites where you can lookup if your older board will support it.
    Currently Intel platform users are wondering if their socket 1155 boards are supporting Ivy Bridge while AMD users want to know if their boards support AM3+ cpus (FX) or Vishera (2nd Generation FX) or Richland if FM2 is used. To answer if support is implemented or planned the following microsites can be checked:
    >Socket 1155 supporting 22nm (Intel IVY BRIDGE)<   
    >AM3+ (AMD FX multicore processors) support<
    >Vishera (2nd gen AMD FX multicore processors) support<
    >FM2 Richland support<

    Simply check the product site for cpu support (like instructed in "How to check CPU support"): http://www.msi.com/support/mb/890GXMG65.html#support-cpu

Maybe you are looking for

  • Error message for Nano

    I am getting this message when I try to sync albums to my I Pod. ITunes cannot add any songs to th IPod because no songs on your IPod library can be copies to this IPod HELP.  WHAT CAN I DO TO FIX THIS?

  • How can I get my iMovie 4 working with a USB Camcorder

    Hello everybody, I bought a Sony DCR SX33E which does not have a FireWire connection. IMovie does not recognize the camcorder and it is not possible to transfer the recorded material to iMovie 4. What can I do to get the camcorder working with my iMo

  • Fading gradients help

    Hi there, been using flash for a while now but im having big problems in sorting this MAJOR problem out: It goes as follows. The movie found at: http://www.ronguy.co.uk/fla/help.sfw is a preview of the problem Basically i need to fade 1 gradient in o

  • Working with raw Microphone data...

    so I'm creating an audio recorder and I'm writing the floats from the SampleDataEvent to a byteArray.  Everything works fine locally, but we need to store these files on our server.  I have tried to use Sound.load with the url of the byteArray howeve

  • Fire A Portal Event With Source Id

    Hi All, I have this requirement where I need to fire an event from a Web Dynpro iView and a delivered iView (MSS Team Viewer) will receive it.  The problem is the receiving iView (Team Viewer) need the source id parameter which is available in EPCF r