Anyone configured with JacORB as a 3rd party ORB?

I get these funny errors with AS 7 using JacORB as a third
party ORB. Because of legacy reasons.
[21/Mar/2003:13:44:07] FINE ( 632): service-j2ee: class "mactiveinc.com.AdbaseIF._CoAdOrderFactoryStub" not found via codebase
[21/Mar/2003:13:44:07] FINE ( 632): service-j2ee: class "mactiveinc.com.AdbaseIF._CoAdOrderFactoryStub" not found via codebase
[21/Mar/2003:13:44:07] FINE ( 632): service-j2ee: class "mactiveinc.com.AdbaseIF._CoAdOrderFactoryStub" not found via codebase
[21/Mar/2003:13:44:07] FINE ( 632): service-j2ee: class "org.omg.stub.mactiveinc.com.AdbaseIF._CoAdOrderFactoryStub" not found via codebase

Are they using the same user account?
If so how many IPads using the same user account. Might be throttling policy

Similar Messages

How to AUTO print DMS with Shop Paper without 3rd party software?

Since standard SAP cannot AUTOMATICALLY print DMS with shop paper.
Is there a way to AUTOMATICALLY print DMS with shop paper without using 3rd party software ? I've heard that there's a user exit or Function Modules that we can use so this will be possible. We don't really want to deal with 3rd party software if we can avoid it.
Has anyone resolved this problem without using 3rd party software?
Thank you,
Sam

It would easier to get an ABAPER to debug the manual process and then use those function modules etc in the modified program.
The ability to print attached documents exists as a manual process of navigate and click, the process is as follows:
1.     Access transaction IW32 (or IW33).
2.     Enter order number (initial screen).
3.     Click enter (change order central header screen).
4.     Select the operations tab page (change order operation overview screen).
5.     Select the relevant operation (change order operation overview screen).
6.     Click the PRT icon (change order operation overview screen).
7.     Select the PRT (PRT list of operation screen).
8.     Click the PRT display button (PRT list of operation screen).
9.     Click the print button (display document screen).
The process prerequisites are:
     Work order created with assigned PRT document.
     PRT documents.
     DMS configuration to allow document to be opened and printed.

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Integration of JacORB as a third party ORB?

Has anyone used iAS7 and JacORB as a third party ORB?
I've seen the instructions about integrating iAS7 with Iona
as a third party ORB.
This doesn't seem to work with JacORB.

Thanks for your interest! To answer your first question: No, transferring metadata or data to Oracle servers certainly isn't typical, nor is it at all a requirement in order to become a third-party provider! You can certainly host your content directly from your firm..
Is your company planning to provide portlets to the community of Oracle9iAS Portal customers? If so, then feel free to learn more about how your firm can join The Oracle Portal Partners Initiative.
On the other hand, if you are just thinking of hosting content for your own intranet for display thru your own installation of Oracle9iAS Portal, you won't need to have any of Oracle's own servers involved at all! To test things out, we do, however have a site available called portalstudio.oracle.com, which allows customers to test and present how one might integrate web content into an Oracle 9iAS Portal installation.

BRFPlus - license with NW fundation for 3rd party - SAP PO applies ?

Hi,
I got the impression that in order to use BRFPlus we need to have SAP NW fundation license for 3rd party,
does anyone know, if we have SAP PO (process orchestration) which has a restricted SAP NW fundation license for 3rd party
(to be used only with BPM, PI and BRM), can we use BRFPlus from PI ?
Thank you for any comments,
Regards,
Michal Krawczyk

Hi Michal,
no idea about the licensing question, but I think you need an additional license due to the Java stack, but this has to be answered by an expert of SAP.
Concerning the usage of BRFplus from PI: The only way I know to use the BRFplus functions from PI is via webservices generated out of the functions.
The other way round is a little more comfortable as you can use the BRMS Connector expression.
BR
Christian

Integration with IP and other 3rd party procurement apps

I don't know about the rest of you, but one of the primary hurdles that we have to get past with target customers is that most of the big ones already have procurement systems that produce POs. Ideally, they'd like to post those POs as either an RFQ/Auction or directly as a PO for a particular supplier. This is particularly true for big manufacturers who initially want to bring their OEM suppliers and contract manufacturers into an on-line procurement environment and then expand that to auctions and RFQs later. The scenario refers primarily to those trading partners that do not have their own back-end systems and EAI solutions.
We think we have come up with a workaround by taking the EDI produced out of the buyer's system into our Hub, transforming it into our cannonical form, then turning the data into an OEX OAG XML auction document, uploading it through a dummy account for that buyer, once the bid is placed by the supplier, automatically accepting, and generating a final PO as a PO Akn back to the buyer's system. It is a little hokey, but it is the best we've been able come up with. (Of course, once the PO message from the buyer's system is sent, the buyer wants nothing to do with it after that. They just want to receive a PO Akn back).
Any ideas?
David Luper
[email protected]
415-325-5028

David,
It sounds like you are hitting on two of our critical issues. Specifically, our issues are the following:
1. We have customers with existing procurement systems containing requisitioning/workflow/approval functionality. They want to continue using this functionality while using our Exchange for sourcing/bidding/tabulation/etc. This gives us the requirement for integration to these procurement systems (iP, SAP, Peoplesoft, etc). We need the ability to load to the Exchange all the parameters for an Auction (open date, close date, type of auction, etc), line items, and potentially even suppliers. We envision that this document load generated from the requisition system could even be flagged to open the auction immediately without the buyer ever having to go to the Exchange. The buyer would then go to the Exchange to see bids and to do the award process. Once the bid was awarded, this would generate a document back to the requisition system for issuance of a PO by the procurement system.
Our second issue is the ability to simply issue a manual PO. This could be done within the Exchange and/or a procurement system. Right now we are missing significant transaction volume due to the inability for a buyer to go issue a direct PO to a vendor on the Exchange without going through the auction or catalog process. If the goods the buyer wants to buy are under their threshold for required bidding and are not in the catalog, they go around the Exchange with a paper PO. This eliminates all the benefits of integration and our chance to charge for this transaction
Both of these issues are extremely critical for us. Dee, what can you tell us about the integration capabilities with procurement/requisition systems or the manual PO functionality? We have heard multiple conflicting reports about the availability of integration with iP.
Thanks!
John Alexander
Way2Bid
[EMAIL][email protected][EMAIL]
417.447.5042 (Voice)

How to call a CORBA Object in a 3rd Party ORB from a EJB

Hello
I found a few articles on the web how to call EJBs for example from C++.
However, I want to do the inverse. I want to resolve an Object (implemented in C++, using OmniORB) via COS-Naming and invoke it from a EJB. I can write a simple Java Client which does this without a problem. But as soon as I try to do the same in EJB I get the following:
[#|2004-11-09T10:48:16.848+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.resource.corba._DEFAULT_.rpc.transport|_ThreadID=12;|"IOP00710209: (INTERNAL) Unable to create listener thread on the specific port"
org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 209 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3142)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3160)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize(SocketFactoryAcceptorImpl.java:60)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.getAcceptors(CorbaTransportManagerImpl.java:190)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.addToIORTemplate(CorbaTransportManagerImpl.java:207)
at com.sun.corba.ee.spi.oa.ObjectAdapterBase.initializeTemplate(ObjectAdapterBase.java:104)
I think there is somehow a conflict because the SUN Appserver also uses CORBA. My Code looks like this:
String[] a = null;
Properties props = new Properties();
final String CORBA_HOST = "arcos";
final String ORB_INITIAL_PORT = "2809";
props.put("org.omg.CORBA.ORBInitialPort", ORB_INITIAL_PORT);
props.put("org.omg.CORBA.ORBInitialHost", CORBA_HOST);
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(a, props);
So I thought this might be because there is already a ORB initialised. So I replaced the last line with
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init();
Which should give me an ORB instance. However I get the following exception:
[#|2004-11-09T11:51:59.206+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.err|_ThreadID=15;|
org.omg.CORBA.NO_IMPLEMENT: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.genericNoImpl(ORBUtilSystemException.java:7085)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.genericNoImpl(ORBUtilSystemException.java:7107)
at com.sun.corba.ee.impl.orb.ORBSingleton.resolve_initial_references(ORBSingleton.java:311)
at com.ascom.util.CorbaNaming.resolve(CorbaNaming.java:26)
at com.ascom.fxm.FileManager.<init>(FileManager.java:46)
at com.ascom.srv.file.web.FileImporterImpl.importFile(FileImporterImpl.java:146)
Any ideas? Thank you very much in advance.
Oliver Jaun

Perhaps you could take a look at the following document and see if it meets your needs:
http://java.sun.com/j2se/1.4.2/docs/guide/rmi-iiop/interop.html

Posting from 3rd party email addresses

Hi folks,
I have researched this matter as much as I can but am still having problems.
Anyone familiar with sending emails from 3rd party email addresses via Windows Mail (Vista Home premium)?
I use Windows Mail for my sins and am fairly familar with it.
I have verified my email addresses with yahoo and activated the verification emails sent.
I still cannot send emails via the server mail.btinternet.com.
Anyone familiar with sending emails from 3rd party email addresses?
This ia the error message:
Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
In Windows Mail
Incoming server is pop3.tiscali.co.uk
Outgoing mail.btinternet.com
My server requires authentication is selected.
Outgoing Mail server log on info.
Email User Name: mymainbt/[email protected]
Password : correct for above account
Remember Password: yes
Log on using secure password authentication: have tried with it on and off
Under advanced:
Outgoing server
Server address: 25
This server requires SSL: Yes.
As stated I have verified this account with BT Yahoo
I am able to set the same Windows Mail account to send via my gmail account easily.
Any suggestions please?
TIA David
Solved!
Go to Solution.

DavidUk1 wrote:
Hi folks,
I have researched this matter as much as I can but am still having problems.
Anyone familiar with sending emails from 3rd party email addresses via Windows Mail (Vista Home premium)?
I use Windows Mail for my sins and am fairly familar with it.
I have verified my email addresses with yahoo and activated the verification emails sent.
I still cannot send emails via the server mail.btinternet.com.
Anyone familiar with sending emails from 3rd party email addresses?
This ia the error message:
Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
In Windows Mail
Incoming server is pop3.tiscali.co.uk
Outgoing mail.btinternet.com
My server requires authentication is selected.
Outgoing Mail server log on info.
Email User Name: mymainbt/[email protected]
Password : correct for above account
Remember Password: yes
Log on using secure password authentication: have tried with it on and off
Under advanced:
Outgoing server
Server address: 25
This server requires SSL: Yes.
As stated I have verified this account with BT Yahoo
I am able to set the same Windows Mail account to send via my gmail account easily.
Any suggestions please?
TIA David
Hi. Welcome to the forums.
As mentioned, unset SSL when using port 25. You could try using port 587 (again without SSL set).
If you still get an error message when trying to send, can you post that ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Connecting directly from ECC 6.0 to a 3rd party system with out XI ?

Hi Guys,
we have developed soap-soap scenarios in XI and we are sending the data from ECC 6.0 -> XI ->3rd party webbased system.
Due to some security reasons we are looking for options of doing the same with out XI ie directly from ECC 6.0 to 3rd party system.
can somebody explain or provide the links for doing the direct connection and also suggest the advantages and disadvantages of eliminating XI completly from the design
any hep would be really appreciated
Thanks,
Srini

HI,
Yes, using standard Enterprise services from SAP you can communicate with 3rd party systems also,
Even you can configure the HTTPS communication with R/3 to 3rd Party system. For this you need to install the client Certificates and have to use valid User ID and Passwords.
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/7cddde33ff05cae10000000a128c20/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
Disadvantage of communication without XI
1. XI provides the re-usability concept. i.e. if you have just R/3 to 3rd party and tomorrow you may need to add another 3rd party or sap system to communicate, then you just re-use the existing scenario.
But in case of direct communication is leads to point-to-point connection.
2. R/3 can't directly support to the open Standards, either you have to use ABAP proxies or RFCs to convert it to XML format. But XI is an Centralized Integration Platform with Open Standard. In current world, Openness is important.
3. XI has the Ability to communicate with other messaging systems/products may be JMS or any other 3rd party systems also which has the limitations with direct communication
4. Complex processes for communication possible instead of only sending and receiving (business process management) (connect e.g. asynchronous and synchronous steps, define complex communication scenarios)
Mapping etc possible to accomplish in Java. Platform independent Java components.
5. XI has Java & .Net support. which is not possible with directly R/3
Thanks
Swarup

IPayment with 3rd Party payment system

Hi All,
I have to configure iPayment with the third party payment system. the 3rd party talks with the Paymentech for credit card processing.
Here in this case,
1. 3rd party server is providing web services to talk with them
2. 3rd party server is working fine with the Paymentech
Issues
1. As per my understanding, I have to use Gateway model overhere. Correct me if I am worng?
2. Do I need to create any configuration servlet to talk with 3rd party server or is there any other way?
3. At which point I should call the web services provided by 3rd party?
4. How to create request as per the web service requirements and how to solve the response provided by web services?
Thanks in advance

Hi,
If your third party system talks with Payment Tech, Is it possible for you to confiure payment Tech directly with iPayment. As you know that oracle provides all the necessary confguration and servelt. Its pretty striagt forward and simple.
Find out whether you can use payment tech directly, that should solve most of your issues. If you need more information, let me know
Thanks,
RK
925 998 1494
Independent Techno Func Consultant

Pull Merchandize distribution with 3rd party SO

Hello,
i want to build process with collective PO and 3rd party order. I like classical 3rd party order, but in case of vendor is internal vendor = supplying site, i am facing restriction. 3rd party can be only used for vendor which is not connected to site. Maybe someone knows new way of doing it in IS-Retail when one company is selling and another company (DC site) is supplying?
We have supplying site S1, distributing site (DC) S2 and selling site S3. So i want goods to be sold by S3, consolidated at S2 and supplied from S1.
I attach two pictures about desired process.
Thanks in advance for any hints!
Regards,
Boris.

Hi
I have done the things suggested by Caprin + Sanjeev Kumar. No help
Here is additional info. . As i am working on this issue i could replicate it in the quality server . I have found out how the issue was caused.
There is a inconsistency between PO delivery date & SO req delivery date. In 3rd party orders the Sch line date is derivied from Vendor info records. The user created SO & PO .The SO got its Sch line date from info record. Then the user manually changed the Requested del date on the SO beyond the sch line date derived from the info record & at the same time leaving the Del date on PO untouched. This has resulted in mismatch between the PO & SO at the same time weird looking sch lines on SO ( the order + rounded qty is on the later date whereas the confirmed qty on the 1st sch line ).
I feel if somebody can suggesta program to bring in sync the VBAP + VBEP + PO line item tables i think it will solve the issue

3rd Party SATA raid cards for internal drives?

All --
Apart from the discussion as to if RAID actually benefits a home desktop system, I am wondering if anyone has the lowdown on using 3rd party SATA raid cards to support the INTERNAL hard drives on the Mac Pro series?
My Mac Pro is still slated to be built at Apple and for now I have the minimum memory and HD spec being requested at Apple, with the plan to upgrade the memory and drives from OWC or another vendor.
I've toyed with the idea of utilizing Disk Utility's software RAID features (e.g. RAID 0 for scratch disks, RAID 1 for boot, RAID 0+1 for all else.) I've also toyed with the notion of searching for a hardware raid solution which would allow me to transfer the internal SATA cable runs from the motherboard to a host adapter card for an internal multi-channel experience (with options to create and break mirrors to external devices for backup purposes.)
So....
Has anyone experience or utilized 3rd party hardware raid controllers which can connect to the internal HD bays? Are there limitations to this (ie, does the boot drive HAVE to reside off the internal motherboard controllers, or can an internal hardware controller successfully boot the system) of which ought be noted?
Finally, in the event that a host adapter card cannot drive the interna bays, can anyone give feedback to hardware SATA cards to power external drive bays with support for Disk Utility (to allow RAID1 pairings of internal drives to external snapshot-backup drives)?
Thanks for your time,
Ian Poulin
Richmond, Va

I am wondering if anyone has the lowdown on using 3rd party SATA raid cards to support the INTERNAL hard drives on the Mac Pro series?
There are many 3rd party controllers that support the internal HDs if an internal iPass connector is used. The problem is that some are bootable but most are not.
The Areca ARC-1680ix-12 and the HighPoint RocketRAID 4320 are bootable. However, the system cannot be installed via the Apple DVD. Instead the user needs to clone a boot drive with the proper drivers to the boot volume on the controller and then boot from the 3rd party controller.
The other issue I found is that these controllers do not support Boot Camp. If Boot Camp is desired, my recommendation would be to leave the internal HDs on the Mac Pro internal bus intact and use the 3rd party controller for external storage. This method provides four internal bays that are bootable, support Boot Camp and can be used for system backups. I use the 3rd party controller for external storage for large RAID sets and hot swapping hard disks.
With the internal bays intact and external hot swap RAID storage available the user can support Boot Camp, multiple system volumes and large external RAID sets. From my experience using a 3rd party controller with the internal HD bays always has some limitations. The user usually does not realize it unit later when Boot Camp does not work or the computer fails on a system upgrade or the controller does not work at all with a new version of Mac OS X.
Staying with the standard internal Mac Pro bay configuration will be the best configuration to avoid compatibility issues with future versions of Mac OS X. It is rumored that the new Snow Leopard may require 64-bit drivers. If that is the case, I would expect most if not all existing 3rd party controller drivers to fail. Some drivers will be upgraded after a few months while others may not. Having the internal Mac Pro SATA controller intact should at least allow the Mac Pro to boot if my guess about compatibility issues is correct.
can anyone give feedback to hardware SATA cards to power external drive bays with support for Disk Utility (to allow RAID1 pairings of internal drives to external snapshot-backup drives)?
There are a large number of external controllers that work with Disk Utility. Here are some of my favorites.
1. FirmTek SeriTek/2SE2-E and the SeriTek/5PM
http://firmtek.stores.yahoo.net/sata5pm2se2.html
http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/5pm/
2. Sonnet Tempo E4P
http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/mac-pro/
3. DAT Optic eSATA_PCIe8
http://www.amug.org/amug-web/html/amug/reviews/articles/datoptic/pcie8/
Have fun!

3rd party apps from someone other then Apple

Does anyone now if you can get 3rd party apps without jail braking and without using Apples application store. I found a website that offers apps that I really want and was very disappointed to see none of the in the Apps store and dont know why nobody made them or offered them there. For $24.99 I can get all these apps that I was really looking forward to seeing in the apps store but werent:
NES System : Nintendo with all the games
Customization : Were I can custom every aspect of the I-Phone from I-cons to backgrounds
Screen shot : A app where I can take a picture of anything that my I-Phone is viewing at that time like from a game or a website ETC.
Video Recorder : I cant believe there was no video recorder in the apples web app release it is just something every phone should have
MMS : Picture messaging, I mean I dont know how many times I recieve a picture message and have to wait till I get home to go on my computer to go to a website just to see them. How long it takes also with normal broadband just to see a simple picture.........This is a must have app
Ringtone: Now all you have to do is select a song from your music library and put it to you contacts that easy no cutting or editing it down to size, no extra programs to make them with and no money to spend to make them
Also much more that I dont feel like describing like:
Instant Messenger
YouTube Downloader
Books
VNC
<post edited by host>

Wow don't try to send a MMS to someones cell phone from the e-mail option this was a nightmare. I tried it to see if it would work and I received a message that the attempt didn't succeed so it kept trying and trying automatically. Then I get a phone call from the person I sent it to telling me it work but for me to quit sending it. I said I only sent it once then he said I have like 15 already so I check out my phone and it is really warm I looked at it and the battery went from fully full to a little less then half empty. So I am like what the heck so I go into my e-mail account and I see there is an e-mail demon meaning there was an attempt to send a e-mail but it didn't succeed. Normally when this happens it will make another try just to make sure it wasn't a service error well apparently my cell phone is continuing to retry to send the message so I have the phone trying my e-mail account trying while the person who the message is being sent to is receiving everyone........So I had to delete every message being sent on my e-mail account, I had to delete my E-mail account on my phone, and I had to shut it off for 30 minutes to see if this works it not I don't know what to do and my nightmare continues as well for the person who's phone keeps blowing up with the MMS message and I am wasting all of his text on his plan.......
Thanks for the bad advice

Any 3rd party version of Epson's Mac version of Print CD?

I've used the Print CD application on my Epson printer (Photo R300) for 2 years now on the PC. Easy and intuitive to use. I have just recently moved over to the iMac, and of course I want to use the same printer, and also be able to use the Print CD application for labeling my CD/DVDs. No problem, the Epson comes with a Mac version of the printer driver and the Print CD software.
Installing and setting up the printer with my iMac was a piece of cake, but WHAT THE ****?! The Mac version of the Print CD software is a complete joke. Awkward and fiddly, and feels as though it was coded as a afterthought by Epson. It is so bad that at the moment I am using Parallels just to be able to use the PC version!
Does anyone know if there is a 3rd party Mac version of this software available?

I filed a bug report/feature request on Apples ADC site. Ticket #6198989.
I have called all of the major VPN solution providers and they all seem to agree that they cant make a VPN solution to run as needed because of the way the Login Window works. I have called Cisco, Birdsoft (VPN-X) and Equinux (VPN Tracker). None of them have a Mac solution that I need. But these vendors do have Windows solutions that are exactly what I need.
Many of my new Mac laptop users were previously running Windows on Dell laptops. The Cisco IPSec client for Windows DOES integrate with the Windows XP login window, and thus they used to be able to log into the LAN via VPN before logging into the PC, and thus they could authenticate to the AD DC's and sync/reset passwords as needed, just as if they were physically in their office on the LAN. Now that those Windows users have "converted" to Mac OS X and Apple MacBook Pros, they are getting frustrated that I can't provide a similar VPN experience for them, and now AD passwords have become a hot-button issue.

3rd party plugins and Lion?

Does anyone know if there are still 3rd party plugins that are not working with Logic 9 and Lion?
Thanks,
Cobb

I don't think there is a comprehensive list anywhere of compatible plugins.
You can however begin looking here:
http://www.sweetwater.com/sweetcare/ts/detail.php?Index=33622
and
http://www.logic-users-group.com/forums/showthread.php?t=5203
Best to check the manufacturers' websites for your important plugins, if they don't feature on these lists.

Anyone configured with JacORB as a 3rd party ORB?

Similar Messages

Maybe you are looking for