Anyone else experience iOS 8 iPad issues with multitasking gestures?

I've had several instances where the multitasking gestures do not respond on my iPad mini. When using the 4-finger swipe up (equivelent to double click the home button), instead of entering the multitasking view, the visible app senses me trying to scroll. I tried this gesture from the Settings app in landscape mode and both sides of the app scrolled. Restarting my iPad fixes this issue temporarilly.
On another occasion, while trying to switch between apps by swiping left to right with 4 fingers, SpringBoard crashed and restarted.
Anyone else seeing these kinds of issues? How best to report to Apple?

Yes, I have this on an iPad Air after updating to IOS 8. The pinch option seems to randomly quit working. It you go to Settings and turn off Multitasking Gestures, leave Settings, and go back in to Settings and re-enable Multitasking Gestures it works again for a while but will then randomly quit again. It seems like it is only the pinch option that quits working.
I have found that when I have the problem I can pull down the Notification screen, or pull up the settings screen using the one finger swipe up or swipe down option and then the pinch options works again. Since I found this circumvention and don't have to toggle the setting it is not as annoying, but I still wind up trying to pinch multiple times before I realize it has quit working so I agree this should be fixed soon.

Similar Messages

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
It happened immediately following the update. I was sending emails and browsing before the update without a problem.
from apple:

I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless. (deleting a top site means you are blocking it from that page) Have not had the message since so it must have had something to do with top sites activity.
Just a note: Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

Anyone else having wifi drop out issues with their iPad 3?

Right from the word 'go' I have experienced frequent losses in wifi connectivity on my iPad 3 (64Gb, 4G). Fortunately I don't have to keep re-entering my wifi password but I do have to keep renewing the lease which is really tedious. My iPad 2 works flawlessly on the same network (Netgear cable modem/router from Virginmedia). I also have an iPod Touch and an iPhone that also work without issues on this set up. Thus far I have tried:
Rebooting the modem
Restoring the iPad 3
Resetting the network settings on the iPad 3
Changing the channel on the router from 'auto' to various other channels
Switching between WPA and WEP encryption on the router
Turning off the auto brightness (a tip I saw that worked on some of the earlier iPads)
None of the above have helped and after three calls to Apple support I have received a replacement iPad 3 which has exactly the same problem? People talk about replacing one's router as a potential solution but my options are limited because this is a combination cable unit supplied by Virginmedia. Also, the issue points pretty clearly to the iPad 3 because, as I mention, my other Apple products work flawlessly. I'm going abroad shortly and I'm thinking of leaving the iPad 3 at home if I can't sort out its wifi capabilities.
Any ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Anyonr else experience wake from sleep issues with early 2009 mini?

I have my early 09 mini attached to a 22" Samsung monitor vis the mini dvi-dvi adapter. This morning i went to wake the monitor and it responded right away normally but then went black. I tried to wake it again i got a screen that was just noise. Like the photoshop noise filter. It required me to hit the power button on the monitor and then it cleared up.

I would like to share that I also have experienced display problems with my Mini. My problem was that when my mini would put my monitor into power save mode, the screen would display a noisy picture when returning out of power save. Sometimes it would clear up on its own quickly while other times the problem would persist until I put the mini fully into sleep mode and then wake it up again. I have since taken my monitor and mini to the Apple store where the Genius Bar examined the problem and gave me a new Mini. The new one is still sealed and sitting in my office. I'm skeptical that it will perform any better. I know for a fact that my monitor is in good working order because it is currently running on another PC and has never shown signs of being faulty. For the record, the LCD I own is a 25.5 inch Asus monitor connected to the mini using the mini-dvi to dvi adapter. At the apple store they tried the mini-display port to dvi adapter and the same problem occurred. I'm really hoping that the display issues can be fixed with a software update. I've read on a number of forums that mini owners have complained about the noisy picture when coming out of power save mode. It's clearly a common problem and I would have to assume that Apple is aware of it by now.

Has anyone else noticed this bug with multitasking gestures on iOS 5?

I recently updated my iPad 2 to iOS 5 and have just noticed this bug with multitasking gestures.
If you're currently in an app and use the four-finger swipe up to open the app switcher, and then subsequently close another app that's open in the background from the switcher, the app doesn't seem to fully close. What I mean is that if you now use the four-finger swipe right/left to switch apps, when you get to the place where that app you closed was, it's still open, and after you view it, it pops back into the app switcher. It seems like the multitasking gestures feature isn't recognizing that you've closed the app and that it should skip it from now on.
If you do the above steps again, but this time after you close the app from the switcher, use the five-finger pinch to go back to the home screen, it seems to clear the "cache" being used by the the gestures feature. Now if you go back into any app and swipe left to right, the closed app won't load up anymore (which is how it should correctly work).
Has anyone else noticed this, or can anyone else reproduce the bug as I described? I'd appreciate it if an Apple employee could confirm that this is a bug in iOS 5 and not just something wrong on my end. Thanks in advance.

02-May-200702:03 PM
scoobyman wrote:
Hi keffa
After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
http://www.nokia.co.uk/A4222231
This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
Useful links: Phone firmware update | Nokia support site

Has anyone else had a screen separation problem with the ipad?

Has anyone else had a screen separation problem with the ipad?

Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards.

Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks

Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

After I unplug headphones, the speakers no longer work until rebooted. Anyone else experience this? Also had the same issue on the Droid Razr Maxx.

After I unplug headphones, the speakers no longer work until rebooted. Anyone else experience this? Also had the same issue on the Droid Razr Maxx.

Ahh. We can still help find the culprit, TeaParty14. Do you have any 3rd party applications installed to play your music? Are you able to hear any audio if you plug the headphones back into the phone instead of rebooting? Any audio for calls through the phone direct or through speakerphone?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

I downloaded Lion and have attempted to 'updat' it from apps to my imac... after 3 hours of uploading it show mw an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

What type of Internet connection do you have? How fast is it?

My iTunes password will update some of my Apps on iPad but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?

My iTunes password will update some of my Apps but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?

- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears

Is anyone else experiencing arbitrary loss of communication with peripherals (like back-up disk)

Is anyone else experiencing arbitrary loss of communication with peripherals (like back-up disk)? The problem on my iMac also seems to involve my HP 2355 printer which ghost-enlivens periodically and resets itself like it has lost power or communication with the computer. I had the same problem on my MacBook Pro. I couldn't figure out why the printer screen was lit up when no one was using the computer. The loss of communication with the back-up disk also happened on the Pro. Two different Apple models; two different computers; two different back-up systems; two different printers. So, I am thinking it is not limited to one computer or computer type or printer.

None of the issues you describe occur on my iPad in iOS 5.
To begin with, reset your iPad: Press and hold the Sleep/Wake + Home buttons at the same time, until you see the Apple logo appear.

Time Capsule which will only let me connect to one device at a time. Anyone else experience this?

I have a Time Capsule which I use with a Macbook Pro and an iMac, as well as my iPhone and an Airport Express. It appears as though it will currently only allow me to connect to one device at a time. I had my MBP and iMac sitting side by side and ran Aiport Utility on both. The Time Capsule would only show up on one or the other but not both. Anyone else experience this? It was working great until a day or so ago.

It sounds as if your Time Capsule is in "Bridge Mode", which would only allow one device to connect to the Internet at a time.
To check......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Check the setting for Connection Sharing
If it is "Off (Bridge Mode)", change it to "Share a public IP address"
Click Update to save your changes

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1. I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem. Strangely enough PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

Anyone else experience iOS 8 iPad issues with multitasking gestures?

Similar Messages

Maybe you are looking for