Anyone else getting an error message in Itunes right now?

I keep getting an error message that has (error -50) and check back later in it. Any one else getting this?

Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different Dock Connector or Lightning Connector to USB cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
The above comes from here:
http://support.apple.com/kb/TS3694

Similar Messages

  • Does anyone else get the error message :iCloud has unexpectedly stopped"?

    I am visiting South Africa and realy heavily on access to my iCloud. For the past 48 hours iCloud seems to be down and I keep getting the error message "icloud has unexpectedly stopped". Apple has not acknowledged the problem, yet. Does anyone else experience similar issues? Any suggestions on how to access icloud.com?

    I'm having the same problem on my wife's computer. I successfully joined several shared calendars from my account, and suddenly started getting this message on the last one. I've tried again repeatedly over the last 24 hours, including sending a new invitation, logging her out of iCloud website, etc.
    Did you find any resolution to the problem?

  • Anyone else getting an error message when trying to update their ipad2?

    everytime I try to update my ipad2 I get an error message! What gives?

    Hi Brian,
    If that is the only message, then it is indicating that there is not enough room on your device to download it OTA (over the air - i.e., via Wifi).
    Hook up your device to iTunes, select your device, select Summary, then select:
    1.     Automatically Back up to: This Computer
    2.     Manually Back up and Restore: Back up Now
    3.     Check for Update
    Cheers,
    GB

  • Is anyone else getting this error message when deploying hellows SOAP app?

    I am trying to deploy the hellows SOAP service manually and get this error when running the HelloClient:
    D:\j2sdk1.4.0\bin\javaw.exe -client -classpath D:\development\projects\sandbox\SOAPTest\bin;D:\development\projects\sandbox\SOAPTest\client\helloService.jar;D:\oracle\jdev9i\jdev\lib\jdev-rt.jar;D:\oracle\jdev9i\jdbc\lib\classes12.jar;D:\oracle\jdev9i\jdbc\lib\nls_charset12.jar;D:\oracle\jdev9i\lib\xmlparserv2.jar;D:\oracle\jdev9i\lib\xmlcomp.jar;D:\oracle\jdev9i\lib\oraclexsql.jar;D:\oracle\jdev9i\rdbms\jlib\xsu12.jar;D:\oracle\jdev9i\lib\xsqlserializers.jar;D:\oracle\jdev9i\lib\xmlparserv2.jar;D:\oracle\jdev9i\soap\lib\soap.jar;D:\oracle\jdev9i\lib\xmlparserv2.jar;D:\oracle\jdev9i\jlib\javax-ssl-1_2.jar;D:\oracle\jdev9i\jlib\jssl-1_2.jar;D:\oracle\jdev9i\j2ee\home\activation.jar;D:\oracle\jdev9i\j2ee\home\mail.jar;D:\oracle\jdev9i\j2ee\home\lib\http_client.jar HelloClient
    [SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type "text/html", must be: "text/xml". Response was:
    <HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1><PRE>oracle.j2ee.xanadu.JasperGenerationError: no source generated during code generation!: error: error message 'class.format' not found<br>binary class definition not found: Hello<br><br>     at java.lang.Throwable.fillInStackTrace(Native Method)<br>     at java.lang.Throwable.fillInStackTrace(Compiled Code)<br>     at java.lang.Throwable.&lt;init&gt;(Compiled Code)<br>     at java.lang.Exception.&lt;init&gt;(Compiled Code)<br>     at java.lang.RuntimeException.&lt;init&gt;(RuntimeException.java:47)<br>     at oracle.j2ee.xanadu.JasperGenerationError.&lt;init&gt;(JasperGenerationError.java:11)<br>     at oracle.j2ee.ws.JavaWrapperGenerator.generate(JavaWrapperGenerator.java:267)<br>     at oracle.j2ee.ws.RpcWebService.generateWrapperClass(RpcWebService.java:627)<br>     at oracle.j2ee.ws.RpcWebService.generate(Compiled Code)<br>     at oracle.j2ee.ws.RpcWebService.getWrapper(Compiled Code)<br>     at oracle.j2ee.ws.RpcWebService.doPost(Compiled Code)<br>     at javax.servlet.http.HttpServlet.service(Compiled Code)<br>     at javax.servlet.http.HttpServlet.service(Compiled Code)<br>     at javax.servlet.http.HttpServlet.service(Compiled Code)<br>     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(Compiled Code)<br>     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(Compiled Code)<br>     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(Compiled Code)<br>     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(Compiled Code)<br>     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(Compiled Code)<br></PRE></BODY></HTML>
         at org.apache.soap.rpc.Call.getEnvelopeString(Call.java:175)
         at org.apache.soap.rpc.Call.invoke(Call.java:225)
         at HelloProxy.makeSOAPCallRPC(HelloProxy.java:48)
         at HelloProxy.sayHello(HelloProxy.java:32)
         at HelloClient.main(HelloClient.java:8)
    Exception in thread "main"
    Process exited with exit code 1.
    Ryan

    Yes, it happens to me too. Btw, where can I get the copy of OC4J with javax-ssl-1_2.jar and jsse-1_2.jar? Because my copy of OC4J only provide javax-ssl-1_1.jar and jsse-1_1.jar.

  • Anyone else getting these error messages in the admin?

    The admin seems sporatic at best when loading pages, and i get this message everry once in awhile like say every 6th click or new page load  http://screencast.com/t/LUczDRD4Vp
    I also get the stock "works on our side" from tech support.
    So, sure it works, most of the time, but who goes to admin to view one page then leave, In regular use, i am getting a few of these errors every session.
    Within those normal bc blue text messages http://screencast.com/t/LUczDRD4Vp sometimes I get this dandy http://screencast.com/t/WPrzEYwSUSyj
    Just thought i would post there here, if anything to get some sympathy from other partners pleading their case and only getting the useless response, "works on our side"

    Hey Rich,
    Reading your posts here on the forums it really is becoming clear you have issues with your connectiong ot BC over anything else. As people and support have pointed out, no one seems to be having the level of issues you are with BC at the moment so you need to look at what the causes could be. Have you run trace routes, pinged the BC servers, see what comes back, see if any packet loss is there, checked your net connection, tried different browsers, different machine..
    I would go through all that if you have not done so already to indentify the problem.
    All working for me in the sense I am not seeing the issues your getting.

  • IS ANYONE ELSE GETTING A ERROR MESSAGE WHEN UPDATING TO 4.4

    MY PHONE WILL DOWNLOAD THE UPDATE,BUT WONT INSTALL IT. IT STARTS AND ABOUT 20-30% INTO TH INSTALL IT STOPS AND SAYS ERROR AND REBOOTS. I HAVE TRIED TO DO THIS VIA DATA & WIFI AND IT KEEPS DOING THE SAME THING.

        BiggRobb,
    Sorry to hear the update is not installing. Are you attempting to update an app or the operating system? Try powering it off and removing and reinserting the battery: http://vz.to/1mLpkIL .
    Next with the device powered off, press and hold the Home button (located at the bottom) & Volume Up button (located on the left edge). With the Home and Volume buttons pressed, press and hold the Power button (located on the right edge) until Samsung logo appears then release all keys.  In the recovery menu select wipe cache partition. (Utilize the volume buttons to highlight and the Power button to select.) Once completed, Select reboot system now. Once the device powers back on dial #832 to connect to the network. Re-attempt the install and let us know how it goes.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Has anyone else gotten the error message when trying to update to ios 6 either through iphone or itunes?

    Has anyone else gotten an error message whne trying to update to ios 6 through iphone for itunes?

    Uninstall iTunes, and go to http://support.apple.com/kb/DL1577 and get the 64 bit version.

  • TS1717 When trying to open itunes I get an error message "New iTunes Library".  any suggestions?

    i can't open itunes.  i get an error message: New iTunes Library.  Anyone else encounter this?

    I have Windows 7.  I went into control panel and selected 'programs' and then 'programs and features'.  Then I highlighted the iTunes program in the list and then selected 'repair'.  It then configured iTunes.  I then restarted my computer and it was okay.

  • I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

    I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

    Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
    <Email Edited By Host>

    Hi vivekanandanganesan,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you are unable to connect to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    - Ari

  • I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I have also retarted twice...

  • I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found. Running Windows Vista with Mcafe protection

    I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found, and Itunes wont open. I'm running Windows Vista with Mcafe protection

    Hi there Br0x,
    You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    -Griff W.

  • Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this?

    Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.

    In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
    * http://www.nexusmods.com/skyrim/mods/modmanager/
    In case of problems with this third-party program, please refer to its support forum:
    * http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

Maybe you are looking for