Anyone else getting these error messages in the admin?
The admin seems sporatic at best when loading pages, and i get this message everry once in awhile like say every 6th click or new page load http://screencast.com/t/LUczDRD4Vp
I also get the stock "works on our side" from tech support.
So, sure it works, most of the time, but who goes to admin to view one page then leave, In regular use, i am getting a few of these errors every session.
Within those normal bc blue text messages http://screencast.com/t/LUczDRD4Vp sometimes I get this dandy http://screencast.com/t/WPrzEYwSUSyj
Just thought i would post there here, if anything to get some sympathy from other partners pleading their case and only getting the useless response, "works on our side"
Hey Rich,
Reading your posts here on the forums it really is becoming clear you have issues with your connectiong ot BC over anything else. As people and support have pointed out, no one seems to be having the level of issues you are with BC at the moment so you need to look at what the causes could be. Have you run trace routes, pinged the BC servers, see what comes back, see if any packet loss is there, checked your net connection, tried different browsers, different machine..
I would go through all that if you have not done so already to indentify the problem.
All working for me in the sense I am not seeing the issues your getting.
Similar Messages
-
Anyone else getting an error message in Itunes right now?
I keep getting an error message that has (error -50) and check back later in it. Any one else getting this?
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different Dock Connector or Lightning Connector to USB cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
The above comes from here:
http://support.apple.com/kb/TS3694 -
Anyone else getting an error message when trying to update their ipad2?
everytime I try to update my ipad2 I get an error message! What gives?
Hi Brian,
If that is the only message, then it is indicating that there is not enough room on your device to download it OTA (over the air - i.e., via Wifi).
Hook up your device to iTunes, select your device, select Summary, then select:
1. Automatically Back up to: This Computer
2. Manually Back up and Restore: Back up Now
3. Check for Update
Cheers,
GB -
Is anyone else getting this error message when deploying hellows SOAP app?
I am trying to deploy the hellows SOAP service manually and get this error when running the HelloClient:
D:\j2sdk1.4.0\bin\javaw.exe -client -classpath D:\development\projects\sandbox\SOAPTest\bin;D:\development\projects\sandbox\SOAPTest\client\helloService.jar;D:\oracle\jdev9i\jdev\lib\jdev-rt.jar;D:\oracle\jdev9i\jdbc\lib\classes12.jar;D:\oracle\jdev9i\jdbc\lib\nls_charset12.jar;D:\oracle\jdev9i\lib\xmlparserv2.jar;D:\oracle\jdev9i\lib\xmlcomp.jar;D:\oracle\jdev9i\lib\oraclexsql.jar;D:\oracle\jdev9i\rdbms\jlib\xsu12.jar;D:\oracle\jdev9i\lib\xsqlserializers.jar;D:\oracle\jdev9i\lib\xmlparserv2.jar;D:\oracle\jdev9i\soap\lib\soap.jar;D:\oracle\jdev9i\lib\xmlparserv2.jar;D:\oracle\jdev9i\jlib\javax-ssl-1_2.jar;D:\oracle\jdev9i\jlib\jssl-1_2.jar;D:\oracle\jdev9i\j2ee\home\activation.jar;D:\oracle\jdev9i\j2ee\home\mail.jar;D:\oracle\jdev9i\j2ee\home\lib\http_client.jar HelloClient
[SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type "text/html", must be: "text/xml". Response was:
<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1><PRE>oracle.j2ee.xanadu.JasperGenerationError: no source generated during code generation!: error: error message 'class.format' not found<br>binary class definition not found: Hello<br><br> at java.lang.Throwable.fillInStackTrace(Native Method)<br> at java.lang.Throwable.fillInStackTrace(Compiled Code)<br> at java.lang.Throwable.<init>(Compiled Code)<br> at java.lang.Exception.<init>(Compiled Code)<br> at java.lang.RuntimeException.<init>(RuntimeException.java:47)<br> at oracle.j2ee.xanadu.JasperGenerationError.<init>(JasperGenerationError.java:11)<br> at oracle.j2ee.ws.JavaWrapperGenerator.generate(JavaWrapperGenerator.java:267)<br> at oracle.j2ee.ws.RpcWebService.generateWrapperClass(RpcWebService.java:627)<br> at oracle.j2ee.ws.RpcWebService.generate(Compiled Code)<br> at oracle.j2ee.ws.RpcWebService.getWrapper(Compiled Code)<br> at oracle.j2ee.ws.RpcWebService.doPost(Compiled Code)<br> at javax.servlet.http.HttpServlet.service(Compiled Code)<br> at javax.servlet.http.HttpServlet.service(Compiled Code)<br> at javax.servlet.http.HttpServlet.service(Compiled Code)<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(Compiled Code)<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(Compiled Code)<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(Compiled Code)<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(Compiled Code)<br> at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(Compiled Code)<br></PRE></BODY></HTML>
at org.apache.soap.rpc.Call.getEnvelopeString(Call.java:175)
at org.apache.soap.rpc.Call.invoke(Call.java:225)
at HelloProxy.makeSOAPCallRPC(HelloProxy.java:48)
at HelloProxy.sayHello(HelloProxy.java:32)
at HelloClient.main(HelloClient.java:8)
Exception in thread "main"
Process exited with exit code 1.
RyanYes, it happens to me too. Btw, where can I get the copy of OC4J with javax-ssl-1_2.jar and jsse-1_2.jar? Because my copy of OC4J only provide javax-ssl-1_1.jar and jsse-1_1.jar.
-
IS ANYONE ELSE GETTING A ERROR MESSAGE WHEN UPDATING TO 4.4
MY PHONE WILL DOWNLOAD THE UPDATE,BUT WONT INSTALL IT. IT STARTS AND ABOUT 20-30% INTO TH INSTALL IT STOPS AND SAYS ERROR AND REBOOTS. I HAVE TRIED TO DO THIS VIA DATA & WIFI AND IT KEEPS DOING THE SAME THING.
BiggRobb,
Sorry to hear the update is not installing. Are you attempting to update an app or the operating system? Try powering it off and removing and reinserting the battery: http://vz.to/1mLpkIL .
Next with the device powered off, press and hold the Home button (located at the bottom) & Volume Up button (located on the left edge). With the Home and Volume buttons pressed, press and hold the Power button (located on the right edge) until Samsung logo appears then release all keys. In the recovery menu select wipe cache partition. (Utilize the volume buttons to highlight and the Power button to select.) Once completed, Select reboot system now. Once the device powers back on dial #832 to connect to the network. Re-attempt the install and let us know how it goes.
BrianP_VZW
Follow Us on Twitter @VZWSupport -
I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?
It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.
-
I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it." how do I get rid of these Old unneccisary Updates? anyone?
Welcome to Apple Communities
What's this app? You need to use another Apple ID to update it -
I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
When selecting a song to play from iTunes library, I continually get an error message indicating the original file could not be found. Then asks, would you like to locate it? Does anyone know how to fix this? I'm not even able to play the songs I purchased due to this error message. Any ideas how to remedy this problem?
ThanksIt would help to have more background about your iTunes collection such as if you keep it on an external drive, or if you have moved or renamed anything recently. iTunes is very sensitive to you renaming or moving files or folders involved with your media. iTunes only keeps a reference to where a media file is located and then goes to look for it when you try to play it. If you have changed things since it was added to itunes then it's like me sending you to look for a friend in my addressbook but that friend has moved.
The other possibility is your computer is starting to lose files. Again, the computer uses a reference database to tell it where on the drive to look for a file. If that database gets corrupt then it starts losing files. Use Dsk Utility's first aid to verify your hard drive. -
updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??
hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian -
since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook. I get an error message indicating the authentication is not accepted.
To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates -
I'm having trouble getting the digital booklet when I download an album. What do I need to do? I get an error message saying the booklet can't be downloaded at this time.
Hello Bdev15,
I would be concerned too if the songs I purchased from iTunes were not downloading to my iPhone. You have taken some great troubleshooting steps already, and thank you for providing the details of the steps you too. I have a few additional suggestions to get it downloaded to your iPhone.
First, I recommend checking to see if the download was interrupted:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If the songs still do not download, next I recommend downloading the songs when connected to another network. For example, if you are using the cellular network, you could switch to Wi-Fi, or you could try an alternate Wi-Fi network. Follow the steps in the section titled "iPhone, iPad, or iPod touch > Music" in the article below to download the songs:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you are still not able to download the songs, you can report an issue with these purchases using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best,
Sheila M. -
I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK. -
I get an error message saying the file is too large. It is smaller than 1GB.
I am trying to open a Keynote presentation on the icloud and I get an error message saying the file is too large. It is 56.76MB so it should open right?
Hi jltaylor6,
Welcome to the Support Communities! What is the size of your available iCloud storage? It sounds like this may be the issue in opening the document?
Size limits of iWork for iCloud beta documents - Apple Support
http://support.apple.com/en-us/HT202900
All iWork for iCloud beta apps
Up to 100 people can edit a document at the same time. Each document can be up to 1 GB. These documents use your iCloud storage, so the size of all your files on iCloud.com can’t be more than your total storage limit.
Manage your iCloud storage - Apple Support
http://support.apple.com/en-us/ht4847
I hope this information helps ....
- Judy -
I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!
You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.
Maybe you are looking for
-
Dear experts, Greetings. I have a small VC application in wich the data entered in the input fields should be displayed on a table upon clicking a button. But when I enter the next set of data, the first row is being replaced. I tried (Assign & Inse
-
Error when importing Fixed Assets
Dear All, Good day! We are now importing the Fixed Assets into SAP Business One 9.0 PL 11 using the data import utility. I already made necessary setup. But when I import, a message prompts and tells "cannot import asset _____; a new asset's useful l
-
Blue Ray Disk Equipment and Players
Hi all, just a quick question: in general, is it possible to watch blue ray disks (bd) with Archlinux? Which hardware equipment is best to be used and which applications for playing have to be used? I am interested in the solution, so commercial appl
-
Hypertext lost in video. Sometimes.
I created a Quicktime export of a Keynote presentation but lost the hypertext when reading the video, altoutgh it works on others Quicktime exports I did earlier ( not on the same file ) My presentation is finished, the web anchor is prefectly valid
-
Updating a JFrame with a new panel
Hi, i want to switch a JPanel placed in my JFrame. But if i do so, i always have to maximize the window and then bring it back again, to see the changes work completely. I tried both repaint() and validate() but both do not work that I always have to