Anyone else has this problem after a 20 min+ conversation

During a long conversation (usually over 20+ min) it has happened that my phone makes this very loud static noise for a second or two, then I can not hear the other person anymore. I hang up and try to call back and I don't hear anything. The phone works fine but I can not hear anyone on the other side eventhough the time is still going when I/they pick up.
I am forced to restart my phone and always and then phone works fine again.
When this happens I am always told by the other side that they could hear nothing noise the whole time.
Is this a problem that I'm only having? Anybody else here?
I am debating to get my phone in as I do not want to get a refurbished one.

NoLeafClover, I understand your frustrations and the frustrations of the community members who are having the same issues. This particular problem would upset me as well because we all want to use our phones for a long length of time without wondering if the phone will loose sound during the call.  This would concern me as well if I was using this device. I show this issue has been reported by other customers and is being reviewed by our technicians and product team for a resolution. We plan to address this problem with our next software update for this phone.
If you continue to have this issue after the software update, we will need to perform further trouble-shooting and review your phone and account for replacement options. Listed is a link to the page that contains info about the last software update. 
http://support.verizonwireless.com/system_update/charge.html  

Similar Messages

  • I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
    It might be something in your backup.

  • HT5242 Since installing this update today, screen flashing has increased dramatically; just wondering if anyone else has this problem and, is there a way to remove an update?

    Since installing this update today, screen flashing has increased dramatically.  Anyone else has this problem and is there a way to remove a software update?

    I just had random letters flash like i was typing them but they didnt show up in the typed section. So weird, bad thing is that I didnt have the original keyboard flickering problem but updated anyway cause Im a fool i guess. It only happened while writing an email n was only the letters U n G.

  • Photomatix is producing a file that is unsupported, does anyone else has this problem?, Photomatix is producing a file that is unsupported, does anyone else has this problem?

    Photomatix is now producing a file that is unsupported, is anyone else having this problem?

    Hi,
    Just blank with a triangle and the error message "unsupported file".  It seems fairly recent.  I don't use it daily but I just did some photography using several exposure for this software.  I contacted Photomatix first and here is their reply:
    "We have received quite a few reports now about this error message and have found that the problem is due to a bug in Aperture and not with our Plugin itself.  With a Google search for 'Aperture Unsupported image format,' one can find many people having this error using Aperture -- in many cases without using any Plugins at all.
    In our investigating of this so far, it appears that this error message is a kind of 'generic' error returned by Aperture.  In other words, this error message is returned when something unexpected happens in Aperture.
    Since we don't have access to the Aperture code, we cannot properly fix the bug of course.  In fact, we haven't even been able to reproduce the problem here which would at least give our engineers a chance to test some possible workarounds.
    We did receive a few reports from users who have helped out by reporting their workarounds.  The best one so far, provided that it works, is to hold the command+option keys while opening Aperture, and choose to rebuild the database.
    Others have solved this by creating a new Aperture library and still others apparently have deleted the images and then reimported the originals from backup.
    One person replied with the following which seems to be a good workaround:
    "I have discovered that things work as expected when launching the plugin from Aperture's "Viewer" view, and that I get failures when launching the plug-in from Aperture's "Browser" view.""

  • It won't respond. Anyone else has this problem?

    i updated my phone. Now, it randomly turns off.
    but it really is not off. i have to have someone text me, then it comes back.
    it won't respond if i try to force shut it down.
    anyone else have this?
    how can i fix this?

    Randy Fast wrote:
    Welcome to the club. Search for the thread, "Mysterious random total shut downs". It has nearly 150,000+ views and nearly 2000 posts. You are not alone, no fix; it's the 3.1 update.
    Take a look at my post on page 118. Try that and let me know if it works.

  • Anyone else having this problem after 4.0 update?

    I just updated my Ipod Touch to the latest version, 4.0 software, as I'm sure most of you have.
    I'm wondering if anyone else is having an issue with the battery draining very very quickly? I have changed nothing on my Itouch, except for the update. All my push notifications are off and I have double checked that. I haven't downloaded any new apps, still using the same ones I always use. My internet connection is still the same as I have checked that too.
    My battery is running down so quickly without using any apps that I have had to charge it twice in the last 8 or so hours. Where as before the update, I used to charge is either once a day or everyone few days, depending on what I did with it.
    So if anyone else is experiencing this, please let me know. Or if you know how to fix this problem I would appreciate some advice on that too!

    I am having this same exact issue with my 2nd generation touch. I saw on some other topics that having wifi on all the time is the problem. I tried turning it off, but it didn't help. You could try that though and see if it helps. But on my iPod, even in Airplane Mode, it drains the battery like a Hummer wastes gas. Incidentally, if turning off wifi works for you, great! Except to me that pretty much defeats the whole purpose of having a touch. Might as well have a nano or Classic. Having to turn of wifi each time you want to check email or use an app that requires wifi is silly. wifi should simply go off when you put the iPod to sleep. But here's the thing. Even with the old version of the software, I could listen to Pandora for 3-4 hours a day (of course requires wifi) and I wouldn't need to charge the iPod but once every couple of days. Now, I can't go 8 hours without the thing draining to 20% warning. To me that says that something else is running the background and that wifi isn't the only problem.

  • My playhead is sticking a bit on every 4th bar.  It's driving me nuts.  Has anyone else has this problem?

    I've gone into preferences and maxed out everything and it's still happening.  Any help would be greatly appreciated.

    The OS is alright. Actually it behaves better than 10.9.
    - Did you use the Scarlett with 10.9?
    - Do you have a driver installed for the Saffire? If so, you need to de-install that, the Focusrite Saffire interfaces don't need it anymore, they're class compliant.
    See http://focusrite.de/answerbase/scarlett-solo-audo-clicks-pops-on-mac
    - Do you use a plug-in which might cause a hickup? Some plug-ins might have a signal dependent CPU load. You can check this by bypassing the plug-ins one after the other and see, if the song plays back without glitches.
    - Open the console and see, if there are any messages right when the glitch occurs.
    Best,
    DaCaptain

  • My iPhone only reads the music I bought on iTunes, anyone else has this problem?

    I can read all my music on iTunes, but not on my iPhone. It's just skipping the music I didn't buy on iTunes...

    I have the same problem. But my goes off with no reason. I don't even talk on it

  • Anyone else has this problem - Airport extreme setup

    I got my new Airport Extreme 802.11n and took out my linksys router and plug in the extreme. Using my Imac, I ran airport utility and it sees my airport but just hangs at "reading base station configuration" and never lets me set up my airport. Tried hard reset, and turn down the whole network and restarted it and still does not let me get past that screen..
    Imac duo core 2 Mac OS X (10.4.8)

    I'm not sure this helps, but...
    Are you using the new "AirPort Utility" app that comes with the 802.11n base station or the older, now defunct "AirPort Setup Assistant" or "AirPort Admin Utility"?
    I tried the "AirPort Admin Utility" and it hangs on giving me a dialog box reporting that "This version of AirPort Admin Utility does not support this base station. ... <Continue>"
    I get no response if I click the Continue button.
    I can use cmd-Q to quit though.
    Other than that, nope I don't have trouble connecting with the newer AirPort Utility over either wired or wireless connection to it. It's "Version 5.0 (500.50)" by the way.

  • I recently downloaded the newest firefox but now it wont connect to the internet anymore. Im using wondows XP. Anyone else has this problem? What to do?

    I cant connect to the internet anymore. I downloaded firefox 4 and I got a error that some programmes didnt run anymore with the newest firefox. I gave the command to continue and now it doesnt work. As you can read I'm not an expert when it concerns computers..

    And Also it keeps Blue screening my laptop??????HEEEEEELLLLLPPPP!!!!!

  • Just installed lollipop. Now I cannot access sounds and notifications. Says" Unfortunately, Settings has stopped". Anyone else have this problem?

    Installed lollipop. Cannot access sounds and notifications in settings. Says, "Unfortunately, settings has stopped". Do not have problems accessing other display. wallpaper, etc. New update says installed successfully. Anyone else have this problem after updating?

    Same here. Any help appreciated

  • Hi i have an itouch 4th gen the problem is that the front cover has started to come away, looks like the glue is drying up, ive got older ones and they are still working fine. Has anyone else had this problem and if so what can be done about this. Thanks

    Hi wondering if anyone can help me, i have an itouch 4 gen and the front cover has started to come away, it hasn't been dropped or anything just started to come away ( although i did notice that it was heating up drastically ) looks to me like the glue has dyed up and as usual the guarantee had not long ran out. Has anyone else has this problem if so what can be done about it. Thanks

    SOme users have reported that their screen has come a little loose but very few.
    Try fixing it yourself
    iPod Touch Repair – iFixit

  • My macbook goes into 'sleep' mode when my mobile runs over the bottom left corner, next to the trackpad, does anyone else have this problem?

    Not sure if anyone else has this problem. I only noticed it a few weeks ago when I left my mobile on the keyboard, towards the left of the trackpad. When I started typing I accidentally nudged my phone off the board and then everything went black. I hit any button and everything turned back on again. I'll assume that it went into 'sleep' mode. Is this normal or should I be worried about the health of my mac?

    I am facing pretty much the same problem ... although sometimes the click does work on other parts of the trackpad, but largely I have to stay focused on the left bottom corner. It's getting slightly frustrating esp. because I like the click better than the "tap" and my MAC is only a month old!!
    Is this a software issue or a h/w problem?
    ~ saumil

  • Anyone else having this problem but me?

    i keep losing my time and date settings so when i set the time and date, it will say the wrong time when i look at it later. if anyone else has this problem PLEASE call apple and tell them. apparently im the first one that has ever reported this problem to apple.

    Apparently you aren't the first one. Try these: http://discussions.apple.com/search.jspa?threadID=&q=TimeandDate&objID=c221&dateRange=last90days&userID=&numResults=15&rankBy=10001

  • Anyone else have this problem with the iPhone 3G S?

    i have a iPhone 3G S white 32 gb abd the sleep button does not work. have tried all kinds of restarts and restores. so I'm just wondering if anyone else has this problem? (getting it replaced by Apple.)

    The sleep button is hardware - if that ain't working, an Apple replacement is definitely the way to go.

Maybe you are looking for

  • Music will no longer syncs to phone

    I have a BB Pearl 9100, my OS is Windows Vista Home, internet provider is Bell.  I first noticed something was wrong when I receive a phone call yesterday and the ringtone was defaulted to a phone ringtone.  The ringtone was originally a song I synch

  • Hard disk rubbing

    Hi My imac has now had 2 serious repairs, I switched her on this morning and I can now hear my hard disk spinning and rubbing against something. Re-booted and still there.... I think it´s about time I was allowed to swap this thing in. It´s a lovely

  • I want to transfer all data on my partner's AB to a separate account on my IMac. Is there a special way to do this?

    The data icludes Mail, Contacts and Calendar, as well as all other data, such as ITunes, MS Office etc.

  • How to change varient values dynamically in APD

    Hi Friends, I have created an APD ,to this APD i am feeding 4 query out puts.For this 4 querys i am using the varients, i wante to change the varient values i.e date field/date ranges fields dynamically.pl.let me know if any b'dy worked such scnarios

  • Jsp errot help!

    i have 4 error after compling this files, cannot 1 help pls! <%@ page import="java.io.*"%> <%@ page import="java.util.zip.*"%> <%@ page import="java.lang.Thread"%> <%@ page import="java.net.URL"%> <%@ page import="java.net.URLConnection"%> <%@ page i