Anyone else have an AGP card that\'s seen as PCI in device manag

Does anyone else have an AGP card that's seen as PCI in device manager > display adapters > general > location PCI bus 1,device 0, function 0
I'm running Win2k and that's what mine says
I have my video set to agp in bios :(

I think that is correct, even though it sounds strange (sometimes USB is seen as COM3). But if you are not sure about the status of the AGP, use a program like WCPUID . Sometimes, under Win98 the AGP is not enabled unless you install first the drivers for the motherboard.

Similar Messages

  • Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?

    Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?

    Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    However... Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Jessica Sanchez wrote:
    I am installing itunes to a laptop and have not sync device to this lap. ...
    Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

  • My daughter bought an 4th generation ipod classic without a charger.  We are using the charger from an ipod touch and it won't charge.  Someone posted online that not all chargers will work on the classic.  Anyone else have this issue and any suggestions?

    My daughter bought a 4th generation ipod classic without a charger.  The ipod was working just fine, but then we tried to charge it using a brand new charger for an Ipod Touch.  It won't charge and someone online someone posted that there ipod touch charger worked on the ipad, phone and whatever else he had but it wouldn't work on the classic.  Anyone else have this same issue?  Any solutions?

    The ipod did not come with a power cord as we purchased it used from ebay.  The ipod was half charged when we received it and it worked well enough to transfer songs to my computer (the previous seller didn't delete their 2000 plus songs).  My son then used the same cord on his computer to transfer the songs, but processed an update to the ipod and after that,it wouldn't work.  So, I'm not sure if we received a bum ipod, an update issue or we have a charger issue, but the cord we used to transfer the songs came from my son's brand new ipod touch.  We've also tried 2 other chargers from ipods we have in the house, 1 being a wall charger. 
    One individual posted online that he took his ipod classic, mac and phone overseas with one charger and it worked fine on all but the classic.  So, I'm thinking that they cords may not be universal.  Online I've read that it must be a 6 pin firewire, high power 2.0 usb cord.  Or that I need to purchase an applie charger.  We don't live close to an apple store and I'm reluctant to order one just to have it NOT work. 
    My daughter is learning the hard way that buying off of ebay is not always the best solution to a cash strapped 12 year old.
    Any other advice is greatly appreciated.

  • When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
    Any solution?? Need help, please!!
    Macbook pro 13 i7
    Iphone 4
    Ipad 2
    Thanks!!!

  • Has anyone else had an iPhone 5 that's only been dropped once accidentally and smashed the screen? Mine has done that and as I don't have mobile insurance it'll cost a fortune to replace it through Apple!!

    Has anyone else had an iPhone 5 that's only been dropped once accidentally and smashed the screen? Mine has done that and as I don't have mobile insurance it'll cost a fortune to replace it through Apple!!  I don't think the phone is fit for purpose as any other phone i've had has been dropped and been fine and surely they expect a mobile to be accidentally dropped at least once!!

    Yeah, sad to hear of your accident:
    If you dropped it on concrete- that is the hardest material and chance of damage goes up tremedously.  Actually you are fortunate not to have mobile insurance because then you have to trust your insurance provider to provide you with a quality replacement or repair.
    Apple is always spot-on you know what you're getting.  They can always attempt to replace JUST the display on an iPhone 5 for $149 + tax is what I've heard them quote others. But they said it's $229 to replace your phone with another whole new iPhone 5.  Get the AppleCare+ because two of these incidents will only cost you $49 + tax in the future!

  • I had no problem connecting to my network and now all of a sudden I can't connect.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?

    I had no problem connecting to my network and now all of a sudden I can't connect my iPad.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?  I've gone thru all my settings and can't seem to find a way to log into my network.  Don't get the option to put in my password.  It just give me the name of my network and option of dismiss instead of password.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I have safari 7.0.2 and OS 10.9.4, everytime I try to install a safari extension such as, Pocket, I get an error message that says, Cannot install extension, I get this with every one of them. Does anyone else have this problem?

    I have Safari 7.0.6 and OS 10.9.4. I cannot install any extensions. Everytime I select install I get an error message, "Cannot instal extension" Does anyone else have this problem?
    Thanks Steve

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Photoshop is no longer letting me save files as .pngs...Anyone else have that problem?

    Photoshop is no longer letting me save files as .pngs...Anyone else have that problem?

    Is your file RGB, Indexed or Grayscale, 8 or 16 bit/channel? It won't save to png otherwise.
    Gene

  • Every time I try to use the "crop" tool, Aperture crashes. Anyone else have that problem?

    Every time I try to use the "crop" tool, Aperture crashes. Anyone else have that problem?

    It's an old installation, 2.1.4. I'm running OS 10.9
    That is the problem. Aperture 2 is not fully compatible with MacOS X 10.9; the crop-tool, the Loupe, some brushes no longer work reliably in the newer MacOS X version. And I really doubt, that there will be bug-fixes for Aperture 2 on Mavericks. These incompatibilities started with MacOS X Lion, and have gotten worse with each new operating system release.
    To run Aperture with Mavericks you will need to update to Aperture 3.5. for full compatibility.
    Do you also have older plug-ins installed, that might be incompatible with Mavericks? Check with the developer's website, if there are updates for any plug-ins.

  • I cannot upload my iPhoto book to the Online Store.  I get an error message that I cannot connect.  Apple support said servers are too busy. Anyone else have this problem and a solution?

    I cannot upload my iPhoto book to the Online Store.  I get an error message that I cannot connect.  Instructs me to try again later.  Apple support said servers are too busy. Anyone else have this problem and a solution?

    I get an error message that I cannot connect.  Instructs me to try again later.
    Try again later?
    LN

  • I just updated to 7.1 on my 5S and now my finger print doesn't work.  Anyone else have that problem?

    I just updated to 7.1 on my 5S and now my finger print doesn't work.  Anyone else have this problem?

    Hey Carol5005,
    Thanks for the question. I understand you are experiencing issues with Touch ID. The following article provides some troubleshooting steps that may be helpful:
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    Resolving issues with Touch ID
    1. Verify that you are using the latest version of iOS.
    2. Ensure that your fingers and the Home button are clean and dry.*
    Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    3. If you are using a protective case or screen protector, it must leave the Home button and the surrounding ring completely unobscured. If it doesn't, remove the case or screen protector and try again.
    4. Tap Settings >  Touch ID & Passcode and verify that:
              - iPhone Unlock or iTunes & App Store is enabled.
              - One or more fingerprints have been enrolled.
    5. If one finger isn't working, tap Edit in Settings > Touch ID & Passcode to delete and then reenroll the finger.
    6. If that finger still isn't working, try enrolling a different finger.
    7. If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
    * Moisture, lotions, sweat, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    Thanks,
    Matt M.

  • My iPhone6 gets hot when speaking more that 5 minutes - anyone else have this problem?

    My iPhone6 gets hot when speaking more that 5 minutes - anyone else have this problem?

        Glen_2015,
    Let's make sure we find the root cause here!  When did this start happening? Is there any physical or water damage to the device? Does the iPhone overheat during other activities? Please share some details.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • TS1631 Iphone 4 microphone not picking up sound properly. Is there a solution to this? Or anyone else having the same problem that have solved it.

    Iphone 4 microphone not picking up sound properly. Is there a solution to this? Or anyone else having the same problem that have solved it.

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
    If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

  • HT1338 Apple sent me a disc for Snow Leapord so I could upgrade to Lion, but the disc won't install.  Anyone else have that problem?  How do i solve?  Can't move to I cloud until it is done.

    Apple sent me a disc for Snow Leapord so I could upgrade to Lion, but the disc won't install.  Anyone else have that problem?  How do i solve?  Can't move to I cloud until it is done.

    Hold c and reboot off the 10.6 disk, run the installer.
    If the machine your upgrading is the 2006, I'd highly advise you stay on 10.6.8
    It's a 5 year old machine, you're in the last life stages of that machine and 10.7 will push it right over the edge.
    10.6 is a GOOD upgrade for that machine, faster than 10.7 or 10.5.
    And 10.6 will run your 10.5 software, 10.7 will not.
    Get iCloud with a new 10.8 machine coming out after this summer, seriously.
    Your machine is too old to bother with Lion.
    Or else you can learn yourself and use this link to get back to Snow, good luck finding your 10.5 programs.
    How to revert your Mac to Snow Leopard

  • Need Mac download not Windows anyone else have that issue when ordering?

    Need Mac download not Windows anyone else have that issue when ordering?

    Yes! Yes! Yes!
    And you can't complain because this company does not provide anyone to answer these questions and it theft by stealth.
    My Mac order was switched to PC first time so I decided to buy again and this time it just won't download. I get a Jrun Servlett Error page instead.
    This company is shonky
    [email protected]

Maybe you are looking for