Anyone else have Navigon problems after iOS4 upgrade?
I have a problem with Panorama View 3D since the upgrade to iOS4. This worked perfectly prior to the upgrade. The problem is that the street names don't refresh after my car starts moving. It doesn't take long before the display is black with garbled text.
This is only a problem with Panorama view 3D (the extra I purchased for $9.99). Everything works fine in regular 3D mode.
Wrog wrote:
I hope they release 1.6 soon.
1.6 is in the works. "With the next NAVIGON update 1.6.0 for iPhone our MobileNavigator will be compatible with the new system software iOS4." http://www.youtube.com/watch?v=35UuWv6JRYg&feature=youtu.be
Navigon is aware of the Panorama issues: http://twitter.com/NAVIGON_US
Similar Messages
-
I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?
I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup. -
Installed lollipop. Cannot access sounds and notifications in settings. Says, "Unfortunately, settings has stopped". Do not have problems accessing other display. wallpaper, etc. New update says installed successfully. Anyone else have this problem after updating?
Same here. Any help appreciated
-
Apple sent me a disc for Snow Leapord so I could upgrade to Lion, but the disc won't install. Anyone else have that problem? How do i solve? Can't move to I cloud until it is done.
Hold c and reboot off the 10.6 disk, run the installer.
If the machine your upgrading is the 2006, I'd highly advise you stay on 10.6.8
It's a 5 year old machine, you're in the last life stages of that machine and 10.7 will push it right over the edge.
10.6 is a GOOD upgrade for that machine, faster than 10.7 or 10.5.
And 10.6 will run your 10.5 software, 10.7 will not.
Get iCloud with a new 10.8 machine coming out after this summer, seriously.
Your machine is too old to bother with Lion.
Or else you can learn yourself and use this link to get back to Snow, good luck finding your 10.5 programs.
How to revert your Mac to Snow Leopard -
i just upgraded my apple TV and now when I rent a movie on iTunes, instead of it playing instantly, it takes 60 hours to load. Anyone else have this problem?
Apple Support, I have just purchased 3 movies 2 from my account and 1 from my wifes account and both systems are stating that it will take 2 days to download. I have a FIOS 150 megabit per second up and 150 megabit per second down busiuness class fiber service to my location. I have tested downloading 10Gbyte files from two other locations and both work fine. I additionally went out and have tested doing speed tests (http://www.speedtest.net/) from over 10 other locations all over the US and all are over 75 magabits per second download speeds with a few hitting 100 and 125 megabit per second speeds. What is wrong with your servers or your internet connection????
This is VERY FUSTRATING!!!
I have additionally tried to download them with my Apple TV and two different PCs all wired on Gigabit Ethernet with jumbo frames enabled. I have tried differnet DNS servers also. I can upload and download files to my office 50G in less than 1 hour. I have also download movies from 2 other movie sites without any problems. -
I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?
Did you manage to fix the issue?
I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update! -
Aperture crashed and will not open after last update. Anyone else have this problem?
Aperture crashed and will not open after last update. Anyone else have this problem?
Yes. See this very forum for 50 threads on it, that explain the solution.
-
Using iPhone 4s and upgrading to iOS 6.1...my phone is losing battery life. Is there a fix? Does anyone else have this problem???
NOLAgal71 wrote:
...my phone is losing battery life. Is there a fix?
Set Up as New Device
http://support.apple.com/kb/HT4137 -
Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes run's slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?I have a 20Mbit wireless line,but i had put a cable from my router to my apple box,but it did not help.
Are you using a home network?
Try the following :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings -
Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?
I have been researching the exchange message loss problem on other forums, but not seen a link to browser as yet. The message loss problem we have here is in a 32bit PB.
-
Cannot use 2 optical drives (Apple Super drives) at the same time on my iMac after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?
Cannot use 2 optical drives (Apple Super drives) at the same time on my iMac after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?
-
I can't access my Numbers documents now that I have OS Mavericks 10.9.3. It says I need to buy an upgrade for 19.99 to access them. Anyone else have this problem?
If you upgraded from previous OS, Look in Applications folder for an iWork folder and launch old Numbers from there.
If you clean installed, look for your old install disks for iWork and reinstall.
They will run on Mavericks but they need to be there. -
I just finished my multi-device upgrade to iOS X. Now, Keynote freezes and is basically dysfunctional. Anyone else have this problem?
What did you upgrade? There is no such thing as iOS X, there is iOS and OS X. iOS is for iphones, ipads, and ipods and OS X is the Mac operating system.
-
I have created a second user on my iMac (OSX 10.7.1) and applications won't stay in the dock and my preferences default after restart. Everything works fine with the main user. Anyone else have this problem?
Hi again, ;o)
I found this advice in another thread (here), which you might find helpful...
Unregistering the iMac from .Mac syncing and re-registering it (replacing the computer's information with the .Mac information) resolved the issue.
The .Mac sync information was Reset (i.e. recopied in it's entirety) from the MacBook (the 'good' computer) to .Mac prior to unregistering and re-registering the iMac, so a fresh copy of the sync could be loaded from .Mac to the iMac.
I hope this helps the others who have had this problem.
Regards,
Art
Yang -
After update to ios 5 iphone 4 not reading SIM........anyone else have this problem?
I updated my iphone 4 to ios 5 and during the setup its telling me my SIM is invalid. Did anyone else have this problem and if yes what was done to correct it?
Same here , even i'm not able to sign in to iMessages all it says is "Could not sidn in.Please check your network connections and try again." the ineternet seems tow ork fine... i've tried turning off / on still no luck
Maybe you are looking for
-
Hi I tried the following code to connect to a JMS server which is running on a remote machine.. String strConnectionFactory="java:comp/env/jms/sample"; String strTopic="java:comp/env/jms/Computer"; Hashtable env = new Ha
-
HPE-510t does not boot with AMD FirePro W5000 (Windows 8.1)
I just purchased an AMD FirePro W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (TDP = 40 W) in my 2011 HPE-510t (i7-2600, 12 GB RAM). Dell U2913WM monitor. My machine will not start with the new card inserted. I upgraded the stock 300 W power sup
-
I just DL'd KN6, along with OS 10.9. My old themes, ones I made, didn't survive the transition. In re-creating them, I made some mistakes (just naming them is a PIA) and I'd like to delete them, but it's apparently different than before, and I can't
-
802.1X dyanmic VLAN assignment DHCP issue (Vista client)
I am labbing dynamic VLAN assignment and have run into a small problem. The switchport is succesfully changing to the new VLAN, but my test PC seems to get an IP address in the native data VLAN before being moved to the new dynamic assigned VLAN. S
-
Ipad using home wifi got disconected
I have a Ipad IOS 4.3.5 (8L1) and it has worked in WIFI without any problem for 7 months. I have a DLINK router with WEP password. I have full WIFI signal, but more often and randomly Safari and Mail do not work: not able to connect to internet. Some