Anyone else having issues updating CS5 Design Premium on Yosemite after reinstalling?

I reinstalled CS5 Design Premium on my MacBook Pro Retina, but now I am unable to download the update for it. any thoughts?

update manually:  http://www.adobe.com/downloads/updates/

Similar Messages

  • [Solved] Anyone Else Having Issues Updating Due to ffmpeg Depedency?

    Hello everyone. When I try to do "pacman -Syu" I get the following:
    error: failed to prepare transaction (could not satisfy dependencies)
    :: sox: requires ffmpeg>=20100108
    :: transcode: requires ffmpeg>=20100108
    :: xine-lib: requires ffmpeg>=20100108
    It's been like this for several days and I just left it alone because I figured there were dependencies that were needed that haven't been uploaded yet. However, I am not getting that message on my desktop and both have the same mirrors set up so I don't understand the difference.
    Has anyone else had this issue and may know how to solve it?
    Last edited by jlacroix (2010-01-19 18:57:32)

    foutrelis wrote:Make sure your mirror hasn't gone out of sync and possibly try `pacman -Syyu'.
    Thank you. I did as you asked and this is what happened:
    :: Synchronizing package databases...
    core 35.8K 122.4K/s 00:00:00 [####################] 100%
    extra 439.5K 233.6K/s 00:00:02 [####################] 100%
    community 373.3K 278.6K/s 00:00:01 [####################] 100%
    archlinuxfr 24.1K 61.4K/s 00:00:00 [####################] 100%
    :: Starting full system upgrade...
    warning: amarok: local (2.2.2-1) is newer than extra (2.2.1-2)
    warning: audacious-plugins: local (2.2-4) is newer than extra (2.2-3)
    warning: blobwars: local (1.14_1-1) is newer than community (1.14-1)
    warning: ca-certificates: local (20090814-2) is newer than core (20090709-1)
    warning: cdrdao: local (1.2.3-1) is newer than extra (1.2.3rc2-1)
    warning: cdrkit: local (1.1.10-1) is newer than extra (1.1.9-2)
    warning: dhcpcd: local (5.1.4-1) is newer than core (5.1.3-1)
    warning: freeglut: local (2.6.0-1) is newer than extra (2.4.0-4)
    warning: gstreamer0.10-ugly: local (0.10.13-3) is newer than extra (0.10.13-2)
    warning: gstreamer0.10-ugly-plugins: local (0.10.13-3) is newer than extra (0.10.13-2)
    warning: kdeedu-marble: local (4.3.4-3) is newer than extra (4.3.4-2)
    warning: kernel26: local (2.6.32.3-1) is newer than core (2.6.32.2-2)
    warning: kernel26-firmware: local (2.6.32.3-1) is newer than core (2.6.32.2-2)
    warning: kernel26-headers: local (2.6.32.3-1) is newer than core (2.6.32.2-2)
    warning: lib32-util-linux-ng: local (2.16.2-1) is newer than community (2.16-1)
    warning: lib32-zlib: local (1.2.3.4-3) is newer than community (1.2.3.3-3)
    warning: libldap: local (2.4.21-1) is newer than core (2.4.20-1)
    warning: libpurple: local (2.6.5-1) is newer than extra (2.6.4-1)
    warning: mkinitcpio: local (0.5.28-1) is newer than core (0.5.26-1)
    warning: pidgin: local (2.6.5-1) is newer than extra (2.6.4-1)
    warning: qca: local (2.0.2-2) is newer than extra (2.0.2-1)
    warning: qtcurve-gtk2: local (1.0.1-1) is newer than extra (1.0.0-1)
    warning: qtcurve-kde4: local (1.0.1-1) is newer than extra (1.0.0-1)
    warning: rp-pppoe: local (3.10-2) is newer than core (3.10-1)
    warning: run-parts: local (3.2.2-1) is newer than core (3.1.3-1)
    warning: sox: local (14.3.0-2) is newer than extra (14.3.0-1)
    warning: strigi: local (0.7.1-1) is newer than extra (0.7.0-1)
    warning: transcode: local (1.1.5-2) is newer than extra (1.1.5-1)
    warning: util-linux-ng: local (2.16.2-1) is newer than core (2.16-1)
    warning: x264: local (20100107-1) is newer than extra (20090416-1)
    warning: xine-lib: local (1.1.17-2) is newer than extra (1.1.17-1)
    warning: zlib: local (1.2.3.4-3) is newer than core (1.2.3.3-3)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: sox: requires ffmpeg>=20100108
    :: transcode: requires ffmpeg>=20100108
    :: xine-lib: requires ffmpeg>=20100108
    My sources are as follows:
    Server = http://archlinux.umflint.edu/$repo/os/x86_64
    Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
    Server = http://lug.mtu.edu/archlinux/ftpfull/$repo/os/x86_64
    Server = http://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
    Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
    Server = http://mirrors.gigenet.com/archlinux/$repo/os/x86_64
    Nevermind, I removed the umflint repo, I thought Pacman would automatically use whatever one is the most up to date. I guess not. It seems to be okay now. :)
    Last edited by jlacroix (2010-01-19 18:57:06)

  • Is anyone else having issues with pages not opening many files after the update

    I have just updated my pages app and now many of my documents cannot be opened. Any ideas ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

    Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

    The "solution" is probably to increase your knowledge.  You've done good things.  Perhaps this article will educate you a bit more about location services.
    Basically, they can be very useful, but can cause a lot of iPhone use.  A major example is "Remind me to ... when I leave home."
    http://support.apple.com/kb/HT5594

  • TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

    Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

    I just started having this yesterday.  It's only happened twice, but it's annoying.  My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated.  Worked fine after that.  Then just a moment ago today my wife texted me and the same thing happened.  I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter.  I suppose I'll send Apple some feedback on this issue.

  • Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

    Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

    That's because part of iOS7 had code in it to look for and recognize unsigned cables.
    In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

  • Is anyone else having issues with airplay after the Lion update?

    Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...

    I'm having the same issue.  So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?

  • Is anyone else having issues with Aperture 3 since downloading Lion?

    Hi All,
    Is anyone else having issues with Aperture 3 after downloading the Lion update? Aperture 3 is running so ssssslllloooowwww !!! I am a sports photographer who needs this to run the way it used to with Snow Leopard. Any suggestions?????
    Thanks,
    George

    It was one of the many issues I had when I was running Lion. I watched the beach balls and the very, very slow rendering of image edits and restored back to my SL clone immediately. It was looking like Aperture 2 and my sanity just couldn't take that again.
    I have to assume that Apple must have tested Lion with Aperture 3, but you wouldn't know it from how it behaved on my system.

  • Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    So, don't use youtube.
    http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
    http://www.youtubealternative.com/

  • I upgraded my 2008 MBPro from 10.5.11 to 10.6.8 Snow Leopard, now iMovie crashes every time I try to insert a title into a sequence. Anyone else having issues?

    I upgraded my 2008 MBPro from 10.5.11 to 10.6.8 Snow Leopard, now iMovie crashes every time I try to insert a title into a sequence. Anyone else having issues?

    I am having exactly the same problem. Any help would be much appreciated

  • Is anyone else having issues with their FabricSkin keyboard not connecting in ios7?

    Since upgrading to iOS7 I've not been able to connect to my FabricSkin keyboard. Is anyone else having issues with Bluetooth?

    Not having any of those.

  • Is anyone else having issues with their I Phone 5 running ios 6.1?

    As stated above:  Is anyone else having issues with their I Phone 5 running ios 6.1?
    I am having issues with the WiFi connection to my AT&T router and voice recognition.
    It wont make post to Facebook half of the time. It is lacking the option to post videos to Facebook, only to mail, message, and You Tube. And finally the voice recognition messes up what it types in both Siri and messages.

    Not having any of those.

  • Anyone else having issue with ipod scrubber bar?

    Anyone else having issue with the ipod scrubber bar? Can rarely get the thing to appear, sometimes it works, sometimes it does not. Then, once it's open, good luck making it go away.
    Anyone else notice any funky, non-responsive, inconsistent behavior?

    So you're having trouble just tapping the album artwork when a song is playing and the scrubber doesn't toggle on and off?
    I'm not getting this funky behavior with 2.1.

  • HT4623 Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??

    Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??  Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen.  Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?

    Hello, cliffiapp4.  
    Thank you for visiting Apple Support Communities.  
    Here are the steps that I would recommend going through when experiencing this issue.  
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding
    http://support.apple.com/kb/TS3281
    Cheers, 
    Jason H.  

  • Is anyone else having issues with unsent emails?

    Is anyone else having issues with outgoing emails?

    Are you getting a specific error message? Have you tried removing the account from the phone and adding it back again after verifying the mobile server settings for the ISP of the email address you use?

Maybe you are looking for

  • Code to derive the Work Week (ISO IW doesn't fit the requirement)

    I could use some assistance with my pl/sql code to derive the work week from the current date. If January 1st lands on Thursday, Friday, or Saturday, the work week for January 1st is '53'. If January 1st lands on Sunday, Monday, Tuesday, or Wednesday

  • Bounded Task Flow dynamic results

    I am developing in JDeveloper 11.1.1.6 In my use case I would like to implement a page that returns a table of data. The page can be accessed 3 different ways. If the user goes directly to the page, they are returned all data that meets the results o

  • How do I make my dataGrid fully expand?

    I am trying to make my dataGid fully expand. I mean I don't want to see scroll. If it has 5 rows, then its height will be exactly fit 5 rows. If it has 10 rows, then its height will be exactly fit 10 rows. How do I do that? Thanks.

  • Erasing and Installing OS X 10.4.8

    Hello, I have a friend with an iMac (17" flatscreen w/ 60gb hdd, 256mb RAM). He upgraded from OS 9 to Jaguar and now want so install Tiger. His current version is 10.1.5. We know that he cannot upgrade directly from 10.1.5 to 10.4.8. The Tiger discs

  • PNG in Batch/Image Processor?

    Can we PLEASE have PNG-24 added to the Image Processor? I've got this basically down as it is quite similar to the way I used to process in batch back in 7.0 days. Set up an action with a save-for-web with a resize and a ctrl-alt-shift-S. Use Bridge