Anyone else having N97 Mini Glitches?

I bought the N97 Mini US edition with S60 5th Ed. Does anyone have the following glitches:
1. When switch to "silent" profile, mainscreen still reads "normal" (though it's silent)
2. When text messaging, if you accidentally type "whatsup" and want to separate 'whats' from 'up', you can't go between the characters, and must erase your way back?!
3. Cannot change phone's ring volume with the phone's side volume toggle button.
Please let me know if these are normal. Is there even a software update?
Thank you

I'm having issues here...
All was fine, but now I can't connect either a brand new Apple keyboard or my mouse. When going through the Bluetooth Setup Assistant the mouse and keyboard are visible and 'connected', but they just can't pair.
For the keyboard I get given the number to enter, but then the Mini doesn't receive it. On some occasions the Bluetooth Sys Pref pane says that they are connected and paired, but neither work.
There are no problems whatsoever using the same keyboard and mouse on my brand new iMac.
I am also noticing that the airport signal is fluctuating from full strength (which it always has been in the few days I've had it and was always the case with the Apple TV that was in exactly the same place).
Hmm, very odd. Will be phoning Apple tomorrow if this doesn't sort itself out.

Similar Messages

  • Why is my 1440x1080 video with 1.333 aspect look 4:3?  Is anyone else having this problem/glitch?

    I ended up rendering it out as 1920x1080 with an Aspect of 1.0, which made it 16x9.  Our client shoots his own videos and sends them to us to edit.  He shoots them as 1440x1080 so I render them out at the same size to maintain the quality.  Usually, rendering H.264 mp4s that are 1440x1080 give me no problems... I was wondering if anyone else ran into this.  Seems like a glitch.

    I always match the entire project to the footage so this problem doesn't happen.
    I have an after effects project dynamically linked to the project.  I think that may be causing the problem somehow, although that is also a 1440 project.
    Again, I had no problems before.  I've done 10+ projects for this client with the same settings and am only now having problems.
    I never recommend shooting in 1440, but that is what they wanted for whatever reason.  Always 1920x1080p or 1280x720p.

  • 10.9.3 on iMac 27", dock displays near middle of screen, desktop picture isn't covering whole desktop. Anyone else having this annoying glitch?

    Hello Everyone.
    I upgraded an iMac 27" (3.4 Ghz, Intel Core i7, 3TB fusion) from Mac OS X 10.8.6., to Mac OS X 10.9.3 a few days back.
    Ever since then, the 2nd user to login on a given day, gets the dock displayed near the middle of the screen. It still interacts OK (e.g. you can launch applications from there), but it is not in it's correct location. The desktop picture (in this case, a shade of solid dark grey), only covers the smaller desktop area (up to where the Dock is). The remaining area of the screen automatically gets a 'light grey' background colour.
    So person A logs in, no problem. But when person B comes along (with perosn A still logged in), the user logins, and they get this 'chopped of' version of the screen, with the dock mid-screen. (See screenshot attached).
    The users can still click on any dock icons, and the applications will open up. But the dock won't return to it's original home, and refuses to 'jump' back to their proper home (at the bottom of the screen).
    I've tried using CSCREEN to change the resolution at startup, via a terminal command and Automator, but that only works on some occasions. Others (like the attached screenshot) boot with the two-colour background, and 'confused' dock. A manual screen resolution change in the Settings area (down and then back up again), resolves the issue for that boot.
    I've tried stripping back all non-essential plug-ins, tried removing a variety of start-up items, add-ons etc. I've tried creating a 'test' account, and the same issues appear to this account too.
    Is it just me, or are others having problems with a misbehaving dock / screen resolution, in Mac OS X 10.9.3 / on an iMac 27"?
    Thank you!
    D.

    Hi folks.
    I found a solution...Looks like the Dock is the culprit it's self. So, I made an automator app that I fire up automatically at login time. The automator app runs a shell script command:
       killall Dock
    (make sure you have a capital D on Dock)
    The Dock gets closed off, and it then re-opens in the correct spot (bottom of the screen -- not the middle of the screen). Hope this helps someone else!
    Enjoy.

  • This new version is terrible !!  It keeps on glitching on me so that I cannot burn cd's.  My playlist is replaced with "list" . Anyone else having this problem ?  Suggestions ?

    I keep on getting a glitch that changes my options at the top.  I lose the "playlist" option and it is replaced by "list".  I cannot burn cd's without the playlist option.  Anyone else having problems with glitches?  Any suggestions ?  I've already uninstalled and reinstalled twice with no luck.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Whenever I ask Siri to send a message to a contact, it will attempt to send it as an iMessage. This is a problem because it will attempt to send iMessages to contacts of mine which aren't even iPhone numbers. Is anyone else having this problem?

    Whenever I ask Siri to send a message to a contact, it will attempt to send it as an iMessage. This is a problem because it will attempt to send iMessages to contacts of mine which aren't even iPhone numbers. Is anyone else having this problem?
    So, this is a problem because when Siri attempts to send iMessages to those without iPhones it, of course, fails.
    For example, if I say to Siri, "Tell my mother 'Hello.'" It will try to send an iMessage. My mother has an Android phone, so the iMessage just gets lost in cyberspace.
    I use Siri quite often, this problem only occured about two hours ago.
    Can anyone help me with this?
                   Thanks.
                        Thomas

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.

    Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.

    Some people have seen their aluminum uni-body discoloring due to body oils.  Go figure.
    Normally putting anything over the keys/aluminum will hurt heat disspation, but you may need to use keyboard covers.
    Or save up $500/year for new keyboards.
    Neither is supposed to be a sarcastic answer.  Either one could end up being the solution.
    Good luck with it.

  • We have an iPad mini, since we updated it with ios7, it no longer picks up our wifi. It doesn't even list my network on the wifi screen anymore. Is anyone else having a similar issue?

    We have an iPad mini, since updating to ios 7, the iPad no longer picks up my network. My iPhone 4 was having a similar issue, but it was picking up my network. I was able to find a fix to the iPhone, but the nothing is working for our iPad. Is anyone else having a problem like this? Is there a fix?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter the Wi-Fi password.
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • Anyone else having terrible slowdown with Mail? Mine is at standstill. Grrrr.

    Anyone else having terrible slowdown with Mail? Mine is at a standstill. Help!

    It just keeps saying that messages cannot be displayed at this time. Been going on, on all devices, for about half an hour or more.

  • My iPad mini drops the wifi when I read an article. Anyone else having this problem?

    When I find an article to read whether it is a magazine or a safari search, the iPad drops the wifi connection.  I will then have to go make it reconnect.  Anyone else having this problem?

    Are you talking about when you use Safari or when you use the Spotlight Search? If it happens in Safari, try clearing Safari, close Safari and reset your iPad.
    Go to Settings>Safari>Clear History, Cookies and Data.
    In order to close apps in iOS 7 or 8, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

  • Anyone else having "No service" problem after update to 6.1.3? iPhone 4S

    I went from iOS 6.0 to iOS 6.1.3 last week and now I have "No service". Happend right after update. I have done everything I can to try to fix it except restore to earlier iOS, which is not possible with iPhone 4S. My SIM works fine in my older iPhone 4 with iOS 6.0.
    I have tried to reset all settings, network settings, restore from DFU mode, recover/restore mode. As a fresh phone. NOTHING makes a difference.
    Anyone else having this problem? I now have a feeling that I have to pay for it to be fixed (probably just giving me a new phone). All just because I wanted to update my iPhone. This is Apple's fault, not mine. Thank you.

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • My iphone 5 is having poor call quality?  Verizon can't figure out why.  Anyone else having problems?

    My phone has been working without any problems since I bought it in January.  Yesterday I had a Zagg invisible shield applied to my phone and as soon as I got home, the call quality was horrible.  I could hear people on the other end however, they couldn't hear me, the call would be dropped, or they said I sounded like I was in a tunnel.  I removed the zagg cover and it is still not working like it was before.  I called Verizon and did everything from resetting the network settings, to restoring the phone to factory settings and restoring it from the last back up.  Nothing is working.  I have never had these problems up until yesterday.  Verizon would try calling my cell and it would ring on their side but not on mine.  Very strange.  Phone is up to date on its software.
    Anyone else having these issues or know a way it can be fixed??? 
    Thank you!!!!

    Hello the third!
    I placed the <ul> css code you supplied in the main.css file as well. No avail.
    But I did just notice there is a tiny thin yellow line between the logo and nameplate graphics at the top and the menu bar. That yellow line disappears in IE8 compatability mode. The graphics sit right on top of the menu bar, as it appears in Dreamweaver, and the margins and such all line up. In regular IE7, the thin yellow line is always there.
    I don't know if this helps, but it is something I just noticed while tinkering around.

  • Is anyone else having major problems after updating to 10.4.8???

    It seems like most of the directly-related-to-OS X programs on my Power Mac are going screwy since updating. DVD Player freaks out after pausing, iChat won't let me video chat, my CPU fans occasionally go into turbo mode... heck, the performance of my Power Mac is generally poorer than before this update. Anyone else having issues right now?
    A Mac expert buddy of mine did observe that if Apple releases a not-so-great update to the OS, usually the next one kicks butt. But my patience is wearing thin...

    Hello Paul.
    No problems/issues here.
    Did you check the hard drive for any directory problems with Disk First Aid repair via Disk Utility when booted from your Tiger install package before installing the 10.4.8 Update?
    Did you disconnect all external peripheral devices and quit all running applications before the install?
    If not and as a first step, check this link for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.
    http://www.thexlab.com/faqs/repairprocess.html
    For future reference before installing a major OS Update such as 10.4.8, check this link.
    http://www.thexlab.com/faqs/installswupdates.html
    If there is no change after performing all system troubleshooting procedures per the link provided, did you use Software Update to install the 10.4.8 Update?
    If so, download the 10.4.8 PPC Combo Update and try re-installing it.
    A Mac expert buddy of mine did observe that if Apple releases
    a not-so-great update to the OS, usually the next one kicks butt.
    But my patience is wearing thin...
    After each and every major OS update is released by Apple, there are a significant number of posts here claiming the update killed this or that or reporting a particular problem always blamed on the update. If there is a 10.4.9 update released by Apple, it will be no different here afterwards.
    Although there have been times a portion of a particular major OS update is determined to be the cause of a reported problem, this is usually quickly addressed by Apple but for the most part, the process of installing a major OS update brings an unnoticed/underlying problem to the surface which is not caused by the update.

  • Is anyone else having issues with netflix on there ipad?

    My netflix freezes when i select a movie and when the pop up comes up it doesnt show a description of the movie wont let me push the play button or exit out of that pop up. Anyone else having this issue. Netflix said theycant help. Also on a side note netflix works on my apple tv and my laptop it is just on my ipad air. Thanks in advance for any help that can begiven

    Try this: (If you have not already)
    Close the app all the way down (Double click home button and then swipe the app icon up and off tghe screen)
    Restart the ipad
    Lauch netflix app
    Is it a specific movie or all?
    Mine appears to be working.

  • After iOS6, my wi-fi keeps disconnecting! Anyone else having this issue?

    After iOS6, my wi-fi keeps disconnecting!
    I'll be playing an online game and every-so-often, my wifi will disconnect. Very annoying when the game im playing requires you to stay til the end to receive points if you win.
    I know its not a problem with my router as this problem only started after i installed iOS6.
    Anyone else having this issue?

    I seem to be having the same problem with the wi-fi, but mine also extends to my phone too - shows I have full signal strength, but won't let me dial out, then sometimes it does and then sometimes it cuts me off!  A bit of me thinks my iphone is about to roll over and expire and it's just giving me a early warning, but having read this discussion I feel there is a glimmer of hope that it's all just Apple (iOS6 & Mountain Lion on my iMac) - hurry up with those updates Apple - PLEASE!!  It wouldn't be so bad if they just confirmed with everyone there's a problem and that the fix is on it's way!!  Communication, Apple, it is the future!!

  • Is Anyone else having problems with their I MAC 24" Foggy display?

    Is anyone else having problems with their I MAC 24" having a foggy display in lower right hand corner after the computer has been on for 30 or 45 min? This is now the 2nd computer that has this same problem. Just wondering if anyone else is having this issue with the IMAC 24"? Does anyone know what might be the cause? I have only had the computer for a month. Thanks very much.

    Thank you for the nice welcome.
    Sorry about posting in the wrong area I found the correct discussion board. http://discussions.apple.com/thread.jspa?messageID=7998535#7998535
    Its seems that I am not alone in my problem but I do have good news to report that apple support has acknowledged the issue is happening and a fix is in the works. The support and assistance I received today helped greatly to restore my faith in apple product satisfaction.
    Lets hope you don't have this experience in the future, hopefully a solution can be reached that is in everyone best interest. I may have to drive a greater distance to another apple store but for myself and others like me feel its worth the extra effort to get better customer service in the long run.

Maybe you are looking for

  • Hyperlink in OO-ALV to Sap-Business- Workplace-Dokuments

    Hello specialists, I  have implemented hyperlinks to an oo-based ALV-List ( please see sample code later ). Now we have the problem that these hyperlinks only work in a local network-area. But we have also foreign-departments on our SAP-system, that

  • Srm 7.0 - Hide field in web dynpro using configurations

    Hello to all, I'm trying to hide some fields on PO web dynpro. In this example on web dynpro /SAPSRM/WDC_DODC_PO_I_BD I start the component configuration /SAPSRM/WDCC_DODC_PO_I_BD, I search for the fields I want to hide and put the visibility attribu

  • How do I set and use a custom time zone?

    We're developing a mixed HTML, javascript and Flex application. In our HTML/Flex application, one of user's settings is the time zone he wishes to use. Since this can be different from the local time zone of the computer he happens to be using, we ne

  • Document created in Pages 06 will no longer open with it!

    I have a document created in Pages 06. I have the trial version of Pages 08, but it's run out of it's trial period. I just opened the document briefly to read it, and 08 opened it. I wanted to see it in 06, as I needed to change it and save it, but,

  • How to specify a wildcard in LMS 4.2 Device Manager

                       I am in the process of transitioning from LMS 3.2 to LMS 4.2.    Device Manager in LMS 3.2 uses asterisk as a wildcard when searching for a device.   When I use the asterisk in LMS 4.2 it does not work.   For instance I enter VCG1*