Anyone else having Safari and iCloud problems with 10.7.2 on iMac?

After upgrading to 10.7.2, I'm having intermittent problems with Safari not connecting to websites. Also, iCloud crashes and hangs when I select the address book. This is on a brand new iMac 2.5 core i5 with no third party web software or plugins (flash, etc.).
Apple care hasn't been much help to me with some other issues I've had, so I thought I'd seek out answers here.
Thanks,

Bump,
No one else is having problems with iCloud hanging?
My safari seems fine now, but iCloud is unusable.

Similar Messages

Is anyone else having more then one problem with this phone? (BBSTYLE)

I've always wanted a blackberry phone, and about 4 months ago I finally did.
Purchased a brand new blackberry style, I was very excited about this purchase.
Anyways, the first 2 weeks were great, then all these problems started to happen..
Since then every month a new problem occurs.
-the phone freezes. (a lot)
-the internet (while refreshing or what I like to call it "thinking") completely closes, and erases everything.
-While using the phone for a call the back of the phone( where the battery is) heats up, to the point where it is too hot to handle.
- the track pad, gets way to sensitive then gets all crazy on me when IM scrolling up or down on a website, or in a text message.
- the wifi does not even want to try and connect.
- then, just recently, i'm not receiving some texts, and missing very important calls.
I'm seriously unhappy, because the knowledge I have about blackberry products (and what it says on the outside of the box) is that this phone is for the busy business person, and I have to wait ten minutes for the phone to start acting right to put in a contact in the address book.

I just bought this phone seven months ago (swapped out a different BB model for "Style", and I'm still unhappy), and it freezes up ALL THE TIME now. It'll freeze up for days on end. I can't live like this anymore. The tech support group said that they'll have to "restore it to factory settings", meaning I'll lose ALL the data I have stored, including all the notes, info, on my Notes Pad under Application. If the phone ever allows me to get to that icon again, I'll have to transfer all of that data to my desktop before I allow them to restore it to factory settings.
But the real issue is is that THIS SHOULD NOT BE HAPPENING in the first place. They make absolutely no apologies for it. I'm reading here that SEVERAL models have the problem of freezing up. This is the last time. When my contract is up, I am DEFINITELY switching to a Galaxy IIS. This is no way to deal with a supposed "smartphone". Research in Motion should be issuing new phones to EVERYONE for the trouble they're causing. The blue cursor/whatever will NOT travel down to the buttons, so, I can't access ANYTHING on my phone. I can't get to contacts, I can't get to my emails, nothing. I have to repeatedly hit the BlackBerry icon, and get to certain areas completely backward, but it's still not functioning 1% of what it should be. I can't scroll around anywhere...not up and down my inbox, on the home page, nothing. What the hell is wrong with them? Don't they do any product testing??? I'm in marketing, and this company, and their products, SUCKl.
If anyone has any advice other than remove the battery and pop it back in after X amount of time, let me know. I've had the battery out for one minute as well as overnight....the phone has stopped now for 55 hours, and I'm sick of it.

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

Has anyone else had a screen separation problem with the ipad?

Has anyone else had a screen separation problem with the ipad?

Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards.

Is anyone else having any of these problems?

Ever since the new update (current version is 5.0.1), there have been many problems with my ipod.
1. The sync screen doesn't show up when I add songs to my ipod from itunes. Actually, I can use the ipod when it is plugged in. It never did this before.
2. My ipod's playlists don't show up in itunes, and neither do the ratings of my songs.
3. When I add songs to my ipod or change a song's rating, the ipod randomly updates files. This updating doesn't change any of my music, but it DELETES all of my playlists, which is very annoying.
Is anyone else having these problems?
Does anyone know what is causing it? Could it be the new update?
P.S., I have automatic syncing turned off, because it was deleting my playlists. But itunes still deletes my playlists, even though syncing is manual.
I tried restoring it, too.

I have a problem kinda similar to that youre not the only one

Is anyone else having these iOS 6 problems on their iPhone?

I've been notciing this more and more lately. When ever I'm using my phone its become exteremly laggy and it freezes up a lot more than when I first got the phone. Also sometimes my text notifications wont pop up and I would have no idea if I would get a text. Also does anyone have the problem when you get a text or just want to turn on the phone to the lock screen the phone just stays black? I press every button and the phone just doesn't turn on. These problems keeps increasing as the days go on. Anyone else have these problems?

Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new. If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

Is anyone else having difficulty syncing yahoo contacts with icloud?

I don't know how long it has been since my yahoo contacts quit syncing with icloud to my ipod touch 4g. I've tried every possible combination today and nothing will get it to work other than going back to the old way of syncing through itunes with the cable connected.
The yahoo group of contacts is blank on my ipod but it seems to be syncing with the "All from My Pc" group which I don't quite understand. I thought before the yahoo group of contacts was full of the yahoo syncd contacts.
I use Yahoo mail so I'm not crazy about moving over to Google although I did already move to use the Google calendar with an android tablet and I am syncing the google calendar just fine with both the android tablet and the ipod touch.
Thanks,
Nic

Yes, I've had call quality issues with my S5. I can hear callers just fine. To them, I sound broken, or they hear nothing but static and garbled noise. Speakerphone works, but is not ideal. Bluetooth works, but I'm not always in my car or connected to bluetooth. A plugged in headset works.
For a time, turning off bluetooth seemed to resolve this. Then I did the update to Lollipop, and the issue intensified. I've tried multiple setting combinations (HD calling off and on, Bluetooth off and on, network Global to LTE/CDMA, Noise reduction off and on, etc...) I've done a system cache clear, FDR, deactivated and reactivated.... finally activated another phone I had available since the S5 was pretty much unusable as a phone. And I'm waiting for a patch to see if it makes a difference.
I wish I had a solution....

Anyone having speed and bootup problems with their iq506 touchsmart?

After buying and loading recovery disks, I am still experiencing slow, slower than normal, response times from my hp touchsmart iq506 pc. It has always been somewhat slow and there are always too many programs running. Even after disabling many programs the iq506 is still slow. I am running vista and wonder would I get better performance with windows7. If someone has figured this out, PLEASE let me know.

I know you said you had tried changing channels but try downloading inssider2 and then run it. This will show the broadcasting networks round about you and their channels including your own. Then enter your router and change your wireless channel to a free or less congested channel.
it may help or at least confirm the strength of your wifi signal
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
It happened immediately following the update. I was sending emails and browsing before the update without a problem.
from apple:

I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless. (deleting a top site means you are blocking it from that page) Have not had the message since so it must have had something to do with top sites activity.
Just a note: Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

Safari and Firefox problems with wireless network

I have seen similar questions to mine on the forums recently. Here's my story: I have 5 month old Mac Book with Leopard, no airport extreme, just the inbuilt Airport card. I connec through the internet with Netgear. I have been on to Apple support who went through all the checks, nothing wrong they say, and suggest I contact Netgear. This I did, rebooted router, switched on/off, updated firmware. And still the same problems - pages ultra slow to load, messages saying I am not connected to the internet but running network diagnostics informs me I am. I have to resend pages three times to get them to load. It's driving me nuts. A couple of things then: should I check the box for 'remember password in keychain' when I'm loggin on to my own secure network? Maybe the keychain not remembering is slowing it down. I also read that with one of the key chain updates (I update automatically so I presume I did this some time back) the airport card might not work, and safe restart is required. Do I need to do this?
I know Apple don't take responsibility for third party equipment, like the Netgear router, but my mac worked amazingly with the internet until about 2 weeks ago, and I have updated everything with Netgear. Any ideas?

I believe the WebKitPlugInHost needs to be updated for Safari as It crashes whenever I am playing FarmVille on FaceBook.

Is anyone else having table border rendering problems in Firefox 3.6.7 for Mac?

I recently applied a Mac Firefox update (not sure which one, but I'm currently on 3.6.7) that introduced some strange table border rendering behaviors. Long story short, on certain pages that I visit regularly, the right-most table borders are now rendering erratically. The problem does not occur in Safari or Chrome on Mac, nor does it occur in IE or Firefox on Windows. Seems specific to Mac Firefox.
To reproduce, using Firefox 3.6.7 on Mac, browse to the following URL:
http://www.relativityreport.com/?page_id=963
...and note the erratic rendering of the right-most table cells on the page (you may need to scroll down to the bottom-most table to see the problem...but not always). They should be gray, but often appear blank (not necessarily all at once). Refresh the page a few times and note how the missing borders randomly appear and disappear. Now click your browser's back button. When the previous page has loaded, click the forward button to return to the affected URL. Note now how all cells render correctly.
Thanks!

I am also getting a similar error. When I increase the border width to 2px or more it becomes sort of eroded.I am using windows 7 firefox 4. Borders seem fine in all other major browsers including IE9.
[http://year3.masterspokerleague.com/index.php?option=com_poker&view=overall&season_id=2 Example] http://year3.masterspokerleague.com/index.php?option=com_poker&view=overall&season_id=2
Any ideas?

Is anyone else having frequent frozen editor problems?

My editor freezes on me every day, at least once, and sometimes a lot more. Today it's happened 4 times. I never know when it's going to happen, but it seems to happen more often when I'm working on large files with a mix of cfscript, cftags and html syntax. To get back to work, I have to close the eclipse window, sometimes clicking the close box 2 or 3 times, then force quit the eclipse process from the task manager, and then I can restart eclipse.
I'm running Windows 7 (x64), eclipse 3.5.1 build M20090917-0800 (x32) and ColdFusion Builder 1.0.0.263215
I cannot start without errors that show up in my log, even after I clear it.
I attached my log file.

I finally solved my problems on Windows 7 64bit with the Eclipse plugin by forcing Eclipse to use the jvm.dll rather than let it use the javaw.exe executable which it uses by default. My setup was Win7 64bit, Eclipse 64bit, and 64bit JVM. I experienced all the problems you describe, and more, but since making this change CFB runs teriffic and I was able to turn all the crap I had turned off 'for performance reasons' back on.
Just going to paste the blog post I made about it. Note that this is 64bit stack-specific, and that CFB standalone is 32bit, so if you want to try this on the standalone install you'll need to make sure you've got a 32bit JVM (one comes with standalone, but you can install a newer one from www.java.com as well). I haven't tried this with standalone, only the Eclipse plugin, but if you're experiencing similar issues you might get the same benefit by doing the basics of what's outlined below:
Original url: http://www.websolete.com/posts/cfbuilder-2-performance-problems-on-windows-7-64-bit-solved
For those of you that continue to experience hangs and massive slowdowns running CFB on Windows 7 64bit, the one thing I found that made all the difference in the world is to have Eclipse use the jvm.dll rather than javaw.exe (the default). I’m using the CFB plugin into Eclipse, but I suspect this may also apply to CFB standalone on Win7 64bit as well. No amount of configuration changes, switching between 32 and 64bit JVM/Eclipse or disabling of features made any difference to the significant performance problems I was continuing to experience UNTIL I explicitly had Eclipse start up using the dll (forcing the JVM to load within the Eclipse process).
I also found that simply adding the –vm argument to the eclipse.ini apparently doesn’t work when trying to specify a specific JRE to use (at least on my machine); regardless of the existence of this argument in the ini file, it will still always fire up C:\Windows\System32\javaw.exe, which is where the problems I was seeing are (high CPU utilization, memory consumption). Not sure why that argument is ignored, perhaps a path issue, but I found that the only way I could be certain that I could run Eclipse with a specific JRE was to invoke Eclipse with the –vm command line argument.
I removed all my old JRE installs and installed the most recent 64bit JRE to C:\Java\64bit\.
What didn’t work:
I first tried updating eclipse.ini with:
-vm C:\Java\64bit\jre6\bin\javaw.exe
but found that Eclipse was still invoking the C:\Windows\System32\javaw.exe for some reason. Eclipse started of course, and the javaw.exe process started going bananas again every time I would try to edit a file and *change the value of an html input tag* of all things – as soon as I changed the input value by adding one letter (even before saving) the javaw.exe process would immediately start eating cpu and memory, and I could repeat this problem consistently across multiple files. Eclipse would hang, and I’d have to forcibly kill it as it would never recover.
I then tried invoking Eclipse with the command line –vm argument, like so:
D:\eclipse\eclipse.exe -vm C:\Java\64bit\jre6\bin\javaw.exe
leaving all the other arguments alone in the ini file; now, I could see that it was definitely using this particular javaw.exe but had exactly the same behavior I described above, edit a file (local filesystem, not network just to clear that it isn’t network related) and javaw.exe freaked out and Eclipse hung until forcibly killed.
I then tried changing the –vm argument in the eclipse.ini file to:
-vm C:\Java\64bit\jre6\bin\server\jvm.dll
When Eclipse started it still had fired up javaw.exe in the Windows system32 directory as above. Whatever.
What worked:
Finally, I invoked Eclipse using the command line –vm argument pointing to the JRE’s jvm.dll, like so:
D:\eclipse\eclipse.exe -vm C:\Java\64bit\jre6\bin\server\jvm.dll
and holy crap, it runs great. Responsive, no appreciable sluggishness, I even turned a bunch of the code assist and insight features back on in light of how great it works now. Because javaw.exe isn’t running I have seen none of the problems I had when using the default invocation. I don’t understand why this option isn’t talked about more (I recall seeing only one reference to it in all the stuff I read), nor why it works better for me than the default javaw.exe but I’ve been running it all day now and it has been working terrific so far.
So, if you’re on Win7 (or maybe even Vista) 64bit, have a 64bit JVM and 64Bit Eclipse and are seeing crappy performance or stability, try this method and see if it doesn’t solve your problems. Off now to uninstall IntelliJ and Komodo trials ….

Anyone else having trouble accessing iCloud email today?

I can't access email from my iPad or my iMac. Anybody else? Of course, it was working fine just a while ago.

I'm having trouble today and on and off all week. Just been onto apple support and I know by them they are tired from the calls. They are beginning to lose faith in their own system. No more happy support anymore. I have totally lost faith in apple

Anyone else having wifi drop out issues with their iPad 3?

Right from the word 'go' I have experienced frequent losses in wifi connectivity on my iPad 3 (64Gb, 4G). Fortunately I don't have to keep re-entering my wifi password but I do have to keep renewing the lease which is really tedious. My iPad 2 works flawlessly on the same network (Netgear cable modem/router from Virginmedia). I also have an iPod Touch and an iPhone that also work without issues on this set up. Thus far I have tried:
Rebooting the modem
Restoring the iPad 3
Resetting the network settings on the iPad 3
Changing the channel on the router from 'auto' to various other channels
Switching between WPA and WEP encryption on the router
Turning off the auto brightness (a tip I saw that worked on some of the earlier iPads)
None of the above have helped and after three calls to Apple support I have received a replacement iPad 3 which has exactly the same problem? People talk about replacing one's router as a potential solution but my options are limited because this is a combination cable unit supplied by Virginmedia. Also, the issue points pretty clearly to the iPad 3 because, as I mention, my other Apple products work flawlessly. I'm going abroad shortly and I'm thinking of leaving the iPad 3 at home if I can't sort out its wifi capabilities.
Any ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Is anyone else having iOS 7 keyboard problems?

This is weird. Ive had iOS 7 since thursday. Now my keyboard is underlining every word i type as if its wrong. And the keyboard space bar says: espacio. And the button besides that says: intro or it switches to lr.
All my settings are in english and ive powered off and back on and that didnt fix it. It looks like its auto corecting in spanish.
Any suggesting in fixing this. Again this just started today.
Thanks

Got it fixed.

Anyone else having Safari and iCloud problems with 10.7.2 on iMac?

Similar Messages

Maybe you are looking for