Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

Similar Messages

  • IPhone 5 microphone not working after updating to iOS 7.1.1

    After my phone updated my microphone stop working during phone calls . I have to put the phone on speaker in order for the other person to hear me..
    It works fine whole using Siri , but not with voice memo app... This has to be a software issue because I replaced the mic and still having the same problem..
    Any help on this would be greatly appreciated.

    Sinistersosick wrote:
    Wow you sound really hurt ... The issue is this problem occurred before the opening of the phone ...
    No, I am enjoying my iPhone, thank you very much.
    It's too late for you now, your experiment back fired.

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • Iphone 4s Cellular data not working after updating to ios 6.0 .

    How to fix my cellular data, is not working after updating to IOS 6.0 ?

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

  • My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • My "Whatsapp" not working after updating to IOS 4.3

    My "Whatsapp" & "GMAIL app" have not been  working after updating to IOS 4.3.
    Any help?

          This link may help you. Ipad unresponsive or not sycning!

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

  • Siri not working after update to ios 8.1.1

    I am using an iphone 6 on tmobile.  After upgrading to ios 8.1.1 Siri is no longer working.  Siri will not pickup voice commands however I have found that if I use headphones with a microphone my voice is picked up through that microphone.  Has anyone else experienced this and if so is Apple aware of this issue.  Help please.

    Have you tried to Reset your settings?
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.

  • HT4623 Wi-fi not working after updating to iOS 6.0

    My wi-fi is not working after upgrading the iSO to 6.0

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

Maybe you are looking for

  • Parameter Field Value returns "no records"

    I am using Crystal 11 and am new to Crystal but not to other Reportwriters.  I have a Crystal report that has 2 parameter fields, one is "Enter Date" that prompts for the start and end date, the other "Select Items" prompts for the supply Item Number

  • Will the iMac support a usb 3.0 hub

    I would like to get a 4 + port hub and thought I'd go ahead anf get the USB 3.0 but I'm not sure my MAC can handle it.  I have all 2.0 devices now but am thinking about the future.  I have the iMAC Quad Core i7.

  • Balance Carry Forward with New GL

    hi, I am trying to do balance carried forward using the new GL and I expect to see retained earnings splits by profit center and segment. I was able to run the program and see the revenue and expenses roll into Retained Earnings account split <u>by p

  • Same Oracle Bind Variable Name in 2 VOs not permitted?

    Hi, JDeveloper Studio Edition Version 10.1.3.3.0.4157 I have 2 different Entity based VOs, those VO's use similar Entities but their WHERE is clause is different, one VO doesn't extend the other one. I have used Oracle (first time use for me) named b

  • How to identify the environment (database) Apex is running on?

    Hi We are going to have 3 environments here: Development, Test and Production (separate databases/servers for each one). As usual, the development process will move applications from Dev -> Test -> Prod. On my Apex 3 applications, I would like to vis