Anyone else's store not working correctly?

I can browse etc..., but none of the buttons work nor can I preview or buy music.
I tried 3 computers...

Hmmm, strange a bunch of friends of having problems as well on PC's... strange no one else is.

Similar Messages

Does anyone else's Siri not work at all?

This is absolutley frustrating it took 3 hours to even activate my service and now the best feature the iPhone 4s has to offer does not work. Siri doesnt take any command I say or understand anything I say and I've spoken clearly and used different people to speak. I've used the same exact questions they use in the demos and siri just says "uh oh theres a problem can u try again?, or sorry I didnt get that...this is very frustrating... anybody else have this problem?? any help would be appreciated

My Siri is not working either it just keeps on saying UH OH there's a problem please try again. I thought about taking the phone into the AT&T store but this is really an Apple issue. Not sure what they can do for me at AT&T but I can't get through on the phone with Apple. And the online support is trying to get me to pay to get service. I just got the phone today. Doesn't it come with some kind of techincal support?

App Store not works correct

I can not reach the first tab at the bottom of the App Store since it was downyesterday how much I pressed it will show the app Percepto instead, what should Ido?

Download it and see if it's any good?
That may tide you over until the App Store works again...
Turn your iPhone off and on and try again.

ITunes Store Pages not working correctly

Since a few days ago iTunes Store (on full page) is not working correctly. The "pictures at the top" do NOT rotate any more (usually every 10 seconds or so before) often with blanks too. Also when clicking on an Lp information the box appears but Blank too. I have tried all the usual methods - permissions and disc checks etc. If I use small page (not full) it seems to work OK. The problem began after Safari 5 arrived. Anyone else having iTunes problems like this? (Similiarly the Dictionary Application with Wikipedia is not working correctly - but thats another issue!). Any answers out there??
Message was edited by: Dave Jelfs

This issue has now been completely resolved with the introduction of iTunes 9.2 Everything up and running again - thank you Apple! (Still an issue with Dictionary app/Wikipedia not functioning correctly, this has not been resolved)

My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?

My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?

Make an appointment at any Apple store, see what the genius bar says/does.
You don't metion whether the car was hot or cold.

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

I downloaded a book in iBooks store.The e-book is not working correct.

I downloaded a book in iBooks store. Titel: Zeitenzauber from Eva Völler. The e-book is not working correct. There are always errors on most of the pages: error at column, etc. I already downloaded the book again. But still the same problem. Any idea what I can do?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Dual 30" ACDs not working correctly in mirror mode

My Apple Care guy is telling me that the problem I have is known and there is nothing they can do for me. I find this hard to believe, especially since it seems like I'm the only one complaining about this, so, before throwing in the towel and accepting defeat I ask, "Does anyone else have two 30 inch ACDs that do not work correctly while in mirror mode?". I have a Mac Pro4,1 eight core Intel Xeon with the ATI HD 4870. The details of my problem are in another post here (http://discussions.apple.com/thread.jspa?threadID=2659330&tstart=0).

Charlie Parker-
I do not represent the position of Apple, Inc. I am another User, like you.
After reviewing your Videos, I suggest that you may never be satisfied with the performance of two displays on one display card.
You are a very exacting and demanding user. You may want to consider having each display on its own card to maintain crispness and lack of transient artifacts.

ITunes not Working Correctly

When I use iTunes without connecting my iPhone, it seems OK. When I connect the iPhone, after the sync has been performed, I get a message that my iTunes is not working correctly and has to be closed. Is anyone else having this problem or know how to address it.
Thanks.

Thanks. Before I saw your reply, I shut down my iPhone fully, restarted it (I had to reset the defaults) and reconnected. The problem did not reoccur. It also seemed to correct a problem I was having the "weather" function on my iPhone. Thanks again.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

The trackpad/gestures is not working correctly on mountain lion

Hello,
After I have downloaded Mountain Lion, my trackpad/gestures is not working correctly. I cannot swipe with the three fingers, etc. and have to reboot and then it works, but will eventually not work over time. Does anyone else have this problem?
Thanks,
Jeff

I am having the same problem now.
Was okay when first installed on date of Mountain Lion release.
Now I have lost function in Spaces.
Spaces would only work if I used Dock icon to move between Spaces.
Now just run everything in one Space.

Adjustment Brush not working correctly

Since moving to LR 5.6 the adjustment brush has not worked correctly.
I am unable to adjust the size of the brush using the scroll function on my Mac mouse.When I try to do this I can see the slider moving indicating the size of the brush but nothing actually happens.When I try to adjust it using the slider itself again nothing happens.
Has anyone else experienced this problem or can you offer some advise please

The ACR plug-in files for PS-CS6 and PS-CC are in different folders, but the camera profiles and lens profiles are in a common folder. Since updates to ACR are typically handled by the product, itself, not direct-link downloads that you must have saved for ACR 7.1, I don’t know what the error means in relation to CC having a newer ACR.
What version of ACR did you have installed for CS6 before you tried to update to ACR 7.1? Are you trying to downgrade from a higher version of ACR on CS6?
The first thing I would try is install ACR 8.3 RC for PS-CS6, using the CS6-specific link at Adobe Labs.
If you really need to go back to an earlier version of ACR, then the Adobe-approved method is to uninstall PS, entirely, then re-install it to get the older version.
It may be that you have to uninstall both CS6 and CC and then install CS6, first, and get it updated the way you want it, then install CC, again, and update it how you want it. That seems like a lot of work, though.
Why are you wanting to install ACR 7.1 for CS6?
If you plan ahead, then the way you can switch between different versions of the ACR plug-in, is to save your Camera Raw.8bi file each time you upgrade (I rename mine so the extension is the version: Camera Raw_8bi.71 and leave them in the same folder), and just replace whatever version of the ACR plug-in with that one you want.

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Ovi store not working on my nokia E7-00

i bought a new nokia E7-00 but the problem is my ovi store is not working.its written could not connect or service not available...plz help me what to do..m from pakistan. thanks

Hi bouzrib
Thank you for posting and welcome to Nokia Support Discussions!
1. Make sure that the phone runs the latest software version. You can use Nokia Suite to check if there's software update available for your phone, refer to this link: http://www.nokia.com/global/support/software-update/belle-asha-symbian-software-update/
2. Check the network quality. If the connection is poor the Store application or downloading applications may not work correctly.
Try to use alternate connection types such as WLAN, 3G or GPRS/EDGE. If there is still issues with network coverage, you must contact the network operator for assistance.
3. Clear the cached memory on the phone
Go to the device Menu
Select Web
Choose Options -> choose Settings
Click on Privacy data
Choose Clear Privacy data -> Choose Cache.
4. Uninstall and reinstall your Nokia Store application. for Symbian^3 devices can be downloaded also from http://lr.ovi.mobi/store/new-symbian-3 directly to phone or download the package to your PC and install it via Nokia Suite.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Anyone else's store not working correctly?

Similar Messages

Maybe you are looking for