Anyone else seeing their audio changing between sessions?

Something that's extremely annoying that has been happening to me in FCP X for a while now and I haven't figured out what's causing it: I setting my audio to -6 db throughout my project and then days or even weeks later, when I fire it back up, the audio is no longer pegging at -6db. It's usually lower. So if I go and change an attribute on that clip, the audio snaps back to where it was before. It's crazy.
I'm using the Limiter effect.
Anyone else getting this behavior?
Thanks

Yep, just fired up my feature film that I went through and perfected the audio levels a couple weeks ago and now they are all screwed up. The levels are not what they were two weeks ago.
Maybe this is a Limiter effect bug.

Similar Messages

Anyone else see their IAP disappear from ITC?

I created a bunch of IAP for two of my apps the past few days. I go back to check them out today (4/4/2012) and see that the IAP have disappeared. It's as if I never entered them in.

I also had another app that just went live with 5 IAP. When I checked the app in ITC, it showed only 3 out of the 5 apps. I went into my app and purchased one of the IAP that was still in the game that had disappeared from ITC. Turns out the purchase went through and from the end user perspective nothing looked amiss.
But my other two apps, which are not live or submitted yet, still show their IAP completely gone. Hope this gets resolved soon.

Anyone else seeing their MBP's shut down due to overheating and no fans?

I have a 2 month old MBP that overheats and locks up when playing World of Warcraft in OS X. The processor temp will get to 100-105 and the MBP locks up and requires a forced hard boot. The fans don't spin up - they stay at 2k.
Also, on the Windows side (64 bit Vista), the upper left hand corner of the chassis gets extremely hot - again no fans spin up.
I have resorted to using smcFanControl to manage the fans in order to prevent overheating. I have seen many people post about this exact same problem on these boards - does anyone have any advice? I am concerned that I am frying the hardware over time!
I called Apple tech support and they say they have no knowledge of this being an issue.

No problem here, at first my fans were stuck at 2k regardless of the temps. I reset the SMC and that (at least for me) fixed the problem.
While I use and advocate the use of smcFanControl, I recommend that you get your laptop repaired (or replaced). Now with that said, there seems to be quite a number of threads of WOW users who complain about the heat being generated from using that game and likewise, it seems pretty evident that using Vista means your laptop will be running hot for what ever reason.
If your fans are not ramping up beyond 2k in OSX, then that's not right, if its running hot in vista or playing WOW then that might be another issue.

Anyone else seeing a sudden uptick in SPAM making it through their Ironports?

Quick question:
We updated our C170 to 8.5.6-092 last week, and since then we've seen a massive increase in SPAM making it through our Ironport undetected.
I've read some updates here re: SBRS and repengine issues after an 8.5.6-092 update, and have investigated these (both are OK) but nonetheless I am curious if others are seeing the same thing.
What I'd like to know is if these are just a new spam campaign that is making it through the Ironport filters, or if we have an actual technical issue after the 8.5.6-092 upgrade that I'm missing.
Current status:
Rule Type    Last Update    Current Version    New Update
CASE Core Files    Tue Sep 30 12:22:51 2014    3.3.1-009    Not Available
CASE Utilities    Tue Sep 30 12:22:51 2014    3.3.1-009    Not Available
Structural Rules    Mon Oct 6 08:08:52 2014    3.3.1-009-20141005_221700    Not Available
Web Reputation DB    Mon Oct 6 01:18:29 2014    20141006_081308    Not Available
Web Reputation DB Update    Mon Oct 6 09:18:56 2014    20141006_081308-20141006_161553    Not Available
Content Rules    Mon Oct 6 10:06:11 2014    20141006_170304    Not Available
Content Rules Update    Mon Oct 6 10:06:11 2014    20141006_170501    Not Available
In general, we're seeing spam with the following characteristics:
1) many originate from, or contain links to, .link domains
2) SBRS on these are clear (-1, -2) and gets a pass on the SBRS check
3) Sample subjects:
SENDER:    [email protected]
SUBJECT:    Exclusive: Enrollment Plans from Blue-Cross, Humana, and AARP.
SENDER:    [email protected]
SUBJECT:    Re: Someone has run-a-background scan on you. See-your results #190860649
SENDER:    [email protected]
SUBJECT:    Alert:Someone ran your background-scan. Read the results #1609820.01
SENDER:    [email protected]
SUBJECT:    Ford Cuts Prices to Make Quotas.
SENDER:    [email protected]
SUBJECT:    Website May Expose Your Arrest Records. (see details)
SENDER:    [email protected]
SUBJECT:    Re: Your background-report may have been viewed on 10/03/14
4) Furthermore, many contain .link URL's in the content, and the newly added URLscanning seems to be giving these a total pass, too.
Some samples: http://signupnow.growingmedicareprovider.link , http://detailshere.largelycarsavings.link etc.
We're playing wack-a-mole with individual rules for subjects and .link domains, i.e. to flag and quarantine these as they come in, but I'd like to know if anyone else seeing this, or just me?
-b

Hello Bryan,
Ideally for us to diagnose if there is a possible fault in your IronPort or with misconfiguration we would need you configuration file, complete message tracking information and also the actual samples which are passing the device.
Thus i would like to recommend you to open a Cisco TAC case with us so we can be of assistance.
In terms of the information provided (there maybe some other variables to consider as well).
I would suggest firstly running this command on your device if not already done.
CLI > updatenow force
Let the systems update all services again.
Continue to monitor.
These server IPs if they continue to send such emails their IP's will hit a blacklist.
However at this point, there are too many variables in place that can affect the scanning of these emails and reasons why they're passing.
EDIT:
8.5.6-092 revision corrects the SBRS connection that was witnessed in -074 as per the release notes.
Regards,
Matthew

Full screen playback in PE9 garbled - anyone else see this?

I mentioned this in a general post but I'll make it a specific question now -
When I click on the "full screen" button near the top right of the interface, full screen playback has a corrupted area which corresponds with where the timescale is on the normal interface. Sometimes the playback cursor "breaks through" as a black vertical line too.
Does anyone else see this?
I have the latest Nvidia drivers installed. Windows XP Pro SP3 Q9300 quad core PC 2GB memory.
Thanks for any observations.

It's very obvious if you do have the problem - a wide strip of the video (horizontal, matching the timescale hidden beneath the full screen display) gets shifted sideways somewhat (flickering on and off), so that any vertical object in the footage gets displaced sideways at that point in an obvious juddering fashion. I tried to do a screen grab but simply doing that makes the problem change - it is more evident when the footage is running than when frozen.
Anyway, adjusting the Windows Display Properties "hardware acceleration" slider, moving it to the left till it is set to the point where the message beneath reads "Disable all DirectDraw and Direct3D acceleraions. Use this setting to correct severe problems with DirectX accelerated applications" seems to fix the problem.
Graphics card is a GeForce 8600 GT, in case that's relevant.
At least I know how to work around the problem. Let's see if others come across the same problem in due course. Maybe it's just a local issue.

Has anyone else experienced Airplay audio dropping?

Has anyone else experienced Airplay audio dropping while playing mp3s from MacBook Pro to Apple TV 2 and/or Airport Express g and/or n versions with an Airport Extreme N base? Using mp4 works fine but I've got some older files in mp3 that in between tracks the audio drops out on all external Airplay speakers while the track keeps playing on the computer.

I too have random drop outs on streaming from a Mac mini (2011) to an ATV. It seems to happen for internet radio and all sorts of mp3, mp4 files.
Yikes.

CDE Front Panel change between sessions

I'm trying to change the front panel workspace buttons so they change between sessions. However, when I log out and back in again they are reset back to "One", "Two", "Three" and "Four".
After I changed the label on one of the buttons, I brought up the Style manager and selected "Set As Home". I went to the $HOME/.dt/sessions/home directory and found the dt.resources file did contain the new label for the button. However, when I log out and back in again the buttons are not set to the new value. What am I doing wrong, please?

Hi Filip,
About the 6 second delay. Did you changed anything in the "function generator.vi"?
And when you change the amplitude of your signal, is it first displayed on the front panel,
or does your output change first.
I am asking you this because i have trouble opening the example. All our pc's have Labview 8.5 installed
and 6.1 is just abit to long ago to be compeletly compatible. So i need to make an image of a pc then uninstall
Labview 8.5 and install an older version. I can open the vi with 8.5 but many subvi's are missing and i can't run
it so i can't see if i have a problem.
So let me know if you changed anything? From what i have seen there isn't anything wrong with the vi.
I think the problem is the following. When we select continuous generation we make the hardware fill a buffer with samples.
so the buffer can be read every time at the same moment and the signal appears continuous. But let's say we change the signal,
then it will only disapear after all the pervious buffer items are read out. So i think if you make the buffer smaller the delay should be smaller.
Perhaps you can take a look at that too.
Kind Regards,
Joris Donders
National Instruments
Applications Engineering
www.ni.com/support

My phone is saying "software update not available at this time" - is anyone else seeing this?

my phone is saying "software update not available at this time" - is anyone else seeing this?

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

Anyone else have their iPad hijacked?

Anyone else have their iPad hijacked? Didn't think it was possible, but I have video of my iPad typing, opening apps, and attempting purchases by itself. I turned off the wifi and it still kept going. Not sure if they were connected to Bluetooth or not because every time I tried to go into settings they would close the window. I ended up just shutting the whole thing down. Has anyone ever had anything like this happen to them?

Ghost typing is what you are seeing and I have seen some other people talking about it. You weren't hijacked, there is a problem with your iPad. Or this is the first "documented" case on an iDevice being hijacked.
Do you have a screen protector on the iPad? If so, does it need to be cleaned?
Post a link to the video of you can.

Does anyone else see a blue screen just before leopard loads up?

Hi just wondering Does anyone else see a blue screen just before leopard loads up? It when i start my cpu after the apple logo and spinning wheel, then it goes to a blank blue screen for a second, then the desktop. Just wondering if that was normal. Thanks

Yes, it is normal for a Mac to have a blue screen during start-up.
You may also see it change colors from blue to gray.
-Mike

Aperture and DNG. Anyone else seeing this?

I shoot a lot of RAW images and some of them on a camera that is not currently supported by Aperture (Panasonic DMC FZ8). When I convert those RAW images to DNG, Aperture displays them perfectly in the import preview. When I import them to a project, Aperture displays them for a few seconds. Then they disappear only to be replaced by the usual blank red image placeholder and the message "Unsupported Image Format". If the program can display these images for 5 or 10 seconds why not permanently?
Anyone else seeing this? If so is there a way to manage these images in Aperture? I like the program, but it's difficult using one app for RAW images and another for the rest. Any news (rumors) as to when Apple may be updating the supported camera list?
Thanks
Joe

Aperture only supports DNG from cameras that it supports the RAW file from, so your Panasonic DNGs are not supported. What you are seeing is simply the embedded JPEG that flicks on until Aperture realizes it is not a supported file.

HT1349 Has anyone else lost their library after downloading Itunes 10.6

Has anyone else lost their itunes library after updating to the new version of itunes on or about 3/29/12? I have a windows xp system. Does anyone know of a website to get the library files back? Apple doesn't seem to know anything.

Check in Restrictions... Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213
If no joy...
Settings > General > Reset > Reset Home Screen

Anyone else seeing better-than-ever speeds?

I was reconfiguring an old Win XP laptop this evening and when I was about done I ran a test on speedtest.net to see how the configuration was performing. I was surprised to see better than ever download speeds. I ran the same test on my Win 7 desktop machine and got the same results and then almost exactly the same numbers on the FiOS speedtest.
Speeds were: 43.12 Mb/s down; 31.96 Mb/s up.
I'm paying for 35/20. I've always seen better than 20 mb/s up but my downstream has always been consonantly right at 35 mb/s. I'm sure not complaining, but I'm curious. Is anyone else seeing this spike in downstream? And can anyone speculate what might be behind it?
edit: By way of a further test I just download a 699 MB Ubuntu distro file. The download ran under 2 minutes at a rock solid and steady 5.3 MB/s. Whew. I like it.

Yes I was wondering about this too. i am getting over 30mbps download on my 25/25 connection. Good job verizon, you guys are looking like a pretty cool company now.

Anyone else seeing this - iDVD 08 *sometimes* can't recognize a superdrive

Anyone else seeing this - iDVD 08 sometimes can't recognize a superdrive in my 1-month old iMac
The error is "Your Macintosh does not have a supported SuperDrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc."
Funny - it never said ths with iDVD 06
I'm seeing this about 20% of the time when opening iDVD.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
Serial Number: W87239PKVUX
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone. Is anyone else seeing this?

I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone 6Plus. Is anyone else seeing this?
The other sections of the iTunes store seem to have errors as well.

I've seen a couple of other threads in the last 10 minutes posting about problem with the store, both have now replied saying that it's working again for them - you could give it another go and see if it's now ok for you

Anyone else seeing their audio changing between sessions?

Similar Messages

Maybe you are looking for