Anyone else seeing this bug (images on buttons)?

I have an app that was converted from Creator 1 that has some buttons on one of tha pages. Those buttons have images that can be seen just fine in the designer and in the preview mode, but when I run the application yoiu can no longer see the images (just get the old red square).
Has anyone else seen this?
Thanks.

Sorry but this is a known issue. To workaround it temove leading / from the buttons image property and re-deploy
Lark

Similar Messages

Odd bug... anyone else seeing this?

I have had this three or four times already and haven't seen any posts about this. Sometimes I fully charge my PlayBook, use it for a little while, put it to sleep and leave it somewhere. When I come back a few hours later the BlackBerry logo on the back is warm and when I wake it up the battery is almost drained... or well on it's way to being drained.
I am pretty sure it is just a software issue, and am looking for a connection to anything so it can be easily recreated. I initially thought it might have been tied to using pdf's but I don't believe that is the case. I am trying to make it so that my wife and I close all of the apps when putting it to sleep to see if that helps.
And for the record, my PlayBook is one of the units with the flush power button which my wife just cannot figure out so she lets it timeout ( no matter how much I show her how easy the button is to use ). I have seen this issue happen when I put it to sleep with the button as well, though. Please, RIM, for the love of God add a sleep button to the power app...
Has anyone else noticed this bug? Is it just me? I tried searching the forums but seemed to only come up with threads about charging.
kdittyr
Accepted PlayBook Applications:
HDB Converter -- Utilities/Calculators

Thanks for updating this thread, peter9477, I just came back to suggest the same fix. I haven't tested it just yet, but will certainly do that first thing when I get home.
I will let you know, here, what I find.
kdittyr
Accepted PlayBook Applications:
HDB Converter -- Utilities/Calculators

Since loading IOS 7.0.4, the images and letters/words on my ipad Mini are fuzzy and less clear. It appears the revised IOS has created this degradation to clarity and sharpness. Anyone else seeing this problem?

My ipad mini display, including letters/words, was crystal clear until the last software upgrade. Now everything is fuzzy and less clear. I'm reading many complaints about this on the Internet forums. Since I read a lot of books on my ipad , this is particularly irritating. Anyone else seeing this issue?

Hi Fitz,
Welcome to the Support Communities!
I found adjusting the size, boldness and contrast settings on the iPad mini were very helpful.
Here is a link to the information in the iPad User Guide on page 112:
manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Large, bold, and high-contrast text
Display larger text in apps such as Calendar, Contacts, Mail, Messages, and Notes. Go to Settings > General > Accessibility > Larger Type, where you can turn on Larger Dynamic Type and adjust the font size.
Display bolder text for items on iPad. Go to Settings > General > Accessibility and turn on Bold Text.
Increase the contrast of text where possible. Go to Settings > General > Accessibility and turn on Increase Contrast.
I hope this information helps ....
Have a great day!
- Judy

Aperture and DNG. Anyone else seeing this?

I shoot a lot of RAW images and some of them on a camera that is not currently supported by Aperture (Panasonic DMC FZ8). When I convert those RAW images to DNG, Aperture displays them perfectly in the import preview. When I import them to a project, Aperture displays them for a few seconds. Then they disappear only to be replaced by the usual blank red image placeholder and the message "Unsupported Image Format". If the program can display these images for 5 or 10 seconds why not permanently?
Anyone else seeing this? If so is there a way to manage these images in Aperture? I like the program, but it's difficult using one app for RAW images and another for the rest. Any news (rumors) as to when Apple may be updating the supported camera list?
Thanks
Joe

Aperture only supports DNG from cameras that it supports the RAW file from, so your Panasonic DNGs are not supported. What you are seeing is simply the embedded JPEG that flicks on until Aperture realizes it is not a supported file.

Full screen playback in PE9 garbled - anyone else see this?

I mentioned this in a general post but I'll make it a specific question now -
When I click on the "full screen" button near the top right of the interface, full screen playback has a corrupted area which corresponds with where the timescale is on the normal interface. Sometimes the playback cursor "breaks through" as a black vertical line too.
Does anyone else see this?
I have the latest Nvidia drivers installed. Windows XP Pro SP3 Q9300 quad core PC 2GB memory.
Thanks for any observations.

It's very obvious if you do have the problem - a wide strip of the video (horizontal, matching the timescale hidden beneath the full screen display) gets shifted sideways somewhat (flickering on and off), so that any vertical object in the footage gets displaced sideways at that point in an obvious juddering fashion. I tried to do a screen grab but simply doing that makes the problem change - it is more evident when the footage is running than when frozen.
Anyway, adjusting the Windows Display Properties "hardware acceleration" slider, moving it to the left till it is set to the point where the message beneath reads "Disable all DirectDraw and Direct3D acceleraions. Use this setting to correct severe problems with DirectX accelerated applications" seems to fix the problem.
Graphics card is a GeForce 8600 GT, in case that's relevant.
At least I know how to work around the problem. Let's see if others come across the same problem in due course. Maybe it's just a local issue.

T420s parts delay...anyone else seeing this

We have a 1 month old t420s that had the mainboard die (wil not power on, power button just slow flashes) We where just told that Dec. 24th would be the earlest the parts depo would have the mainboard!! Anyone else seeing this type of delay? This is a laptop on a Next Day on site enterprise contract. Having a user down for that long is nuts.

hey djcam,
welcome to the forums and apologies for the inconvenience caused by this.
could you pm to me the following
Name:
Country:
Mobile:
Email:
MTM [machine type model]:
(To locate MTM - http://support.lenovo.com/en_US/FindProductNumber.page#find)
Serial Number (S/N):
Date of Purchase:
Case/Order Number : (if any)
Screenshot of Error(if applicable) : (upload it to a hosting site and paste the link here)
Location of unit : Home / Repair Center (delete where appropriate)
Description of issue :
Troubleshooting Taken : (if any)
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Colorpicker behavior: anyone else see this?

I'm just sampling what should be straight grey, and I get much more saturated samples than should possibly be represented in the image.
I'm seeing this behavior in Photoshop CS5, ATI 5700 video card, latest drivers, Win XP Pro SP3. I see this with or without OGL acceleration. I see this with the modal eyedropper, or with the selected eyedropper tool. Anyone else see this?

I tried to duplicate just what you did. It doesn't paint any color for me - the picked colors just paint shades of gray.
I noticed that your brush doesn't paint all the way to the edges. Specifically, it looks as though you're getting an "all or nothing" coloration, and the size of your brush "footprint" is varying during painting... Is this some kind of brush dynamic at work? I don't use a tablet myself.
Something's definitely acting funny there, and I'd say it could be in the brush settings or behavior of the brush rather than the picker (or both).
I have an ATI 4670 by the way, on 10.11 Catalyst.
-Noel

After upgrade on OS and Safari 7.1 I can no longer do 2 finger scrolling. Anyone else find this bug in upgrade?

After upgrade to 10.95 OS and Safari 7.1 I can no longer do 2 finger scrolling. Anyone else find this bug in upgrade? If so, ideas on how to fix it?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Anyone else seeing this - iDVD 08 *sometimes* can't recognize a superdrive

Anyone else seeing this - iDVD 08 sometimes can't recognize a superdrive in my 1-month old iMac
The error is "Your Macintosh does not have a supported SuperDrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc."
Funny - it never said ths with iDVD 06
I'm seeing this about 20% of the time when opening iDVD.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B08
SMC Version: 1.8f2
Serial Number: W87239PKVUX
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
iDVD:
Version: 7.0
Last Modified: 8/10/07 6:44 PM
Kind: Universal
Get Info String: iDVD 7, Copyright 2001-2007 Apple Inc.
Location: /Applications/iDVD.app

I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone. Is anyone else seeing this?

I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone 6Plus. Is anyone else seeing this?
The other sections of the iTunes store seem to have errors as well.

I've seen a couple of other threads in the last 10 minutes posting about problem with the store, both have now replied saying that it's working again for them - you could give it another go and see if it's now ok for you

All v8 files saved from Illustrator CC seem to be corrupt - anyone else see this?

Hi There,
I've tried searching for this but couldn't find anything. I'm trying to import an illustrator file into Cinema4D which requires me to save a v8 eps - but when I try to import, nothing happens.
At first I hought it was a C4D issue but if I:
Create a new Illustrator file in CC
Export v8 eps
Try to open the newly created v8 eps in Illustrator CC
Then I see the following error:
"Can't open the Illustration. The illustration contains an illegal operand. Offending operator: {eps_metadata_stream} Context: ZA"
I've tried the following steps to reproduce the issue on two different Macs (10.8.4 and 10.8.5) and see the same error each time:
Create a new blank file (print intent)
Create a text box and type some text
Convert all text to paths
Save as Illustrator v8
Does anyone else see this issue in Illustrator CC?
Any help would be appreciated.
Cheers
Ben

I'm having this same issue.
Sadly HDave387's fix doesn't work for me. I have Universal Type client instead.
What does seem to work though is "Save as Copy". For some reason that's perfectly fine, but "Save As" throws out an error when trying to reopen the v8 .eps.

My phone is saying "software update not available at this time" - is anyone else seeing this?

my phone is saying "software update not available at this time" - is anyone else seeing this?

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

Upgrade to IOS 6 has caused everything to slow down, noticeably..ANYONE ELSE SEEING THIS PARTICULARLY ON MY MAC

Is anyone else seeing this noticeable slow down?
Ever since the IOS 6 , at least since then, everything slows down and nothing is wrong, just nothing is any where near as fast as it used to be... Other friends who have macs also say the same....
Is there a fix coming or something to restore thiings back to normal.

Allan,
Just about everything...The internet is slow and I have a very fast FIOS connection 25 up and down....
You click on something, i.e. a bookmark and it takes a while for it to do anything...Dock items seem to react slower to open, it is like it thinking about it before anything happens....
Not sure how to describe it, but several friends have said the exact same thing...even on our Ipads...
Do you see nothing slower?
Harry

Persistent Aggregates bug with logic - anyone else see this ?

A long while ago I posted a bug report regarding the use of aggregates with the Stealthplug guitar audio interface. I also reported this on the apple bug report system.
Basically, when using Logic8 with stealthplug and OSX Tiger ( latest 10.4 ) I configured an aggregate using AudioMIDI setup program, configuring Stealthplug as the input and the built in audio as the output.
When one creates an audio track with the aggregate name selected I Logic8
preferences INITIALLY one can get audio input to show up, the "record" button appears and one can hear audio output to the main macbook audio outputs. However on repeated use and selection/deseletion of the particular named aggregate one finds that the stealthplug input is no longer enabled ( the record button disappears).
I found out recently that if I delete the aggregate ( I only had one aggregate st up ) and create a NEW aggregate, this time with a different name, but with the same settings ( stealthplug as input, built in outputs as output ) then one can get the aggregate to work initially in logic8. However after a few sessions, or switching between audo devices in preferences, the aggregate again fails to work, by this i mean I no longer get the "R" button appearing in the channel strip for the input.
Stealthplug works fine when selected itself if one selects this as the device, but NOT when used through an aggregate. I suspect this is something to to do with aggregates and not stealthplug.
My suspicions is that it has something to do with the way logic8 or the CoreAudio system stores its aggregate preference information since I find that if I delete the original aggregate but recreate the same aggregate settings using a different name then the aggregate will work for a short time.
This really needs fixing since aggregates are potentially so useful.
Anyone else seen this with stealthplug or another audi interface ? is the Aggregates system just plain buggy? dos this problem go away in Leopard ?

Well I can say that after installing updates to QuickTime is appears I have been having a lot of trouble with Aggregate Devices as well. I use 2 896HD MOTU interfaces and after a few sessions of Logic, the Aggregate device stops working. I can either (a) reset the computer, (b) sometimes reset the coreAudio driver (works rarely) or (c) create a new Aggregate device like you have and it all starts working again.
Even worse, some of my USB MIDI interfaces like the Fantom X7 just loose connection as well. If I remove the USB and then plug back in, it's recognized again immediately.
Something is seriously broken and I have NO clue where to begin to help fix it. The only thing I could do is re-install OSX 10.5 and not do the quicktime updates and see if that helps. Unfortunately, that is a LOT of work! (I use like 146 AU plugins total).

Has anyone else noticed this bug in the 10.x firmw...

A vibrate issue I have noticed in the 10.x firmware. Steps to replicate...
1. Put phone into silent mode or any other mode where the phone is set to vibrate when a call comes in (You can actually do this at any point before step 4).
2. Put your N95 into landscape mode and watch a video or play music (You may optionally plug in some headphones if you wish).
3. Close the video down, take headphones out, put phone back into standby.
4. Call yourself or get someone to call you from another phone.
5. Your phone will not always vibrate when the call comes in even though its supposed to. I tried this ten times and it only vibrated as it was supposed to during 3 of those attempts.
So far I can't work out whether this is caused by inserting headphones or making use of the media buttons by sliding the slider down.
Anyone else noticed this?
Useful links: Phone firmware update | Nokia support site

02-May-200702:03 PM
scoobyman wrote:
Hi keffa
After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
http://www.nokia.co.uk/A4222231
This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
Useful links: Phone firmware update | Nokia support site

Anyone else seeing this bug (images on buttons)?

Similar Messages

Maybe you are looking for