Anyone else with Macbook Pro that keeps logging out in Time Machine, stopping the backup?
Okay
My backup drive bit the dust, big time, so I got a fresh external, but cannot get Time Machine to work.
13" Macbook Pro keeps terminating Time Machine and logging out when on power cord when going to screen saver.
I've set the screen saver to start after NEVER, the computer and display sleep to NEVER in Energy Saver, as I have it on an external monitor.
Still does not stay logged in.
Any other ideas?
I seriously need to back up.
MacBook Pro
MacBookPro8,1
Intel Core i7
2.7 GHz
Processors:1
Cores:2
L2 Cache (per Core):256 KB
L3 Cache:4 MB
Memory:4 GB
From the menu bar, select
▹ System Preferences... ▹ Security & Privacy
If there's a closed padlock icon in the lower left corner of the preference pane, click it and enter your login password when prompted.
Click the Advanced button and, in the sheet that opens, uncheck the box marked
Log out after … minutes of inactivity
Similar Messages
-
How can I back up all of my macbook pro data to my USB if time machine is not functioning properly?
I attempted to back up my data from my macbook pro to my USB entirely through time machine. The first half hour was successful until It told me the backup was not able to happen and it completely stopped working from that point on. Is there any suggestions or other things I can do? I do not mind reformatting the USB or erasing everything from it, but I am not sure how to do that on the mac either.
Thanks againmake sure time machine is turned off in system preferences. (it won't let you erase the disk if time machine is still trying to access it)
open the disk utility from in your user account utilities, make sure you are in the erase tab and also make sure you have the whole HD selected (not the section for backups that may be indented under it) also make sure the disk is mounted (there is option at the top of the disk utility toolbar to mount the disk if necessary.
once you have done both of these, make sure that next to format it says mac OS extended journaled and then click the button that just says erase.
after it's done you should then be able to go into system prefs and turn the time machine back on and select the disk to start the backups again.
if it still won't let you erase or do anything w/ the external drive after these steps there may be issue w/ the HD itself that needs addressed -
How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
this is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update
Don't switch email providers. Switch to another email client on your Mac. It is not Yahoo. I have 3 Yahoo accounts and never have any problems getting or sending mail from/to those accounts. But I don't use the built in Mac Mail program. I use Thunderbird. I use thunderbird on both Mac OS X and Windows. Been using it for some time now with no problems getting my Yahoo mail, Google gmail mail or form my work email account.
-
I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what? I need to know what to highligh, what to click on.
hirogliffix,
take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection. -
i tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption
Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe. -
APPLE TECH TEAM SUGGESTED TO REPLACE MY MACBOOK PRO'S LOGIC BOARD FOR 2ND TIME?All the funtionality and applications is working fine but my screen backlight is off.If i expose it to direct sunlight , i can see what is running on my MAC(out of warranty)
likely display inverter board.
did you get your inverter board replaced already?
Did you have a question?
If the diagnostic in shop indicates same, thats 1000X better than anyone can do online in "diagnosis" (not really genuine diagnosis of course) -
My newish MacBook Air was just lost to a coffee spill, and I need to migrate back to my MacBook Pro using a recent back-up (Time Machine to external disk) for a few weeks. This same disk was used to back-up the Pro earlier, and to migrate from the Pro to the Air. Can I do this "back-migration" from the Air to the Pro? Is it maybe better just to migrate the specific folders (Outlook email, Office docs) I am sure I need?
Do not attempt to copy files/folders from a Time Machine backup. Only use the Time Machine application to restore from the backup.
Click on a Finder window and select Help from the Finder's Help menu. Search for "restore" and select "restore items backed up with time machine" from the hints list. You will find these two articles:
Recover items using Time Machine and Spotlight
If you use Time Machine to back up your Mac, you can use Time Machine with Spotlight to recover lost or deleted items.
Note: You can retrieve earlier versions of TextEdit documents from within TextEdit. For more information, see:
View and restore past versions of documents
Open a Finder window and type a search word or phrase in the search field in the upper-right corner.
Select a location to search in the location bar.
Refine the results by specifying search criteria. Narrow down Spotlight search results
Open the Time Machine menu in the menu bar, then choose Enter Time Machine.
Use the arrows and timeline to browse the Time Machine backups. Your search is performed in every window.
When you find the item you want to restore, select it, then click Restore.
The restored item is returned to its original location. For example, if the item was found in the Documents folder, it’s returned to the Documents folder.
Restore items backed up with Time Machine
If you use Time Machine to back up your Mac, you can easily bring back lost items or recover older versions of files.
You can use Time Machine within many apps. If the iCloud Documents & Data feature is turned on, you can recover older versions of iCloud documents as well as regular documents.
Open a window for the item you want to restore.For example, if you accidentally deleted a file from your Documents folder, open the Documents folder. To recover an email message, open your inbox in Mail. To recover an iCloud document, open the document’s app, choose File > Open, then click iCloud to view the iCloud documents for that app.If you’re missing an item from the desktop, you don’t need to open a window.
From the Time Machine menu in the menu bar, choose Enter Time Machine. A message may appear while your Mac connects to the backup disk.
Use the arrows and timeline to browse the snapshots and backups.White tick marks represent snapshots stored on your internal drive (portable computers only). Pink tick marks represent backups stored on your backup disk. If a tick mark appears dimmed or grayed, there’s no backup available or the backup disk is not connected.
For more information about an item, double-click it.The windows in Time Machine behave just like Finder windows, so you can open folders, click items in the sidebar, and use the search field in the upper-right corner of the window.
When you find the item you want to restore, select it, then click Restore. You can restore individual items, multiple items, folders, or your entire hard disk.The restored item is returned to its original location. For example, if the item was found in the Documents folder, it is returned to the Documents folder. -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
I can select a disk (Time Capsule) and initiate the backup. It only "waits to back up" then "making backup disk available" and remains frozen there. I tried to update the software a while back and was unsuccessful, I think that may be the issue.
Any insight would be greatly appreciated. This is the error message I receive.
TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
ThanksSee #C17 in Pondini's excellent support document Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0 -
I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?
Okay, I've sussed it. I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine. I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across. Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended. Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list. Hey presto. Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again. Hurray. -
i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?
See Pondini's TM FAQs, for starters.
-
IMac, MacBook Pro, 750GB USB Hard Drive and Time Machine
I have my external hard drive partitioned and directly connected to my iMac. Time Machine mounts and backs up one partition. I have the other partition configured to share off of the iMac. The MacBook Pro sees the partition in time machine but the back up fails every time. I understand that the drive won't allow the two Macs to back up at the same time, so I've shut off Time Machine on the iMac....still no success. Could someone please point me in the right direction.
So I have made some head way regarding this odd problem. Turns out my memory card reader is fine I think. My memory card reader will eject on the right port using a 4GB Lexar 133X professional CF card but NOT on the left USB port. However ALL 3 of my sandisk CF cards work fine in the reader on both USB ports. These 3 cards range from all different speeds from 15MB/sex to 30MB/sec. My lexar is 20MB/sec rated. Go figure!?
As for the Western Digital My passport USB 3.0 drive I have come to the conclusion its the drive and not the port. Reading through various forums on Anandtech, Apple Support and the Western Digital website forum many people have had issues with these drives on USB 3 ports on both Windows and on the Mac.
http://forums.anandtech.com/showthread.php?t=2302617
http://community.wd.com/t5/External-Drives-for-PC/My-Passport-2TB-USB-3-0-keeps- randomly-disconnecting-HELP/td-p/477224 -
I have a MacBook Pro 13" 2010 model running Mountain Lion. I have always been able to use Time Machine with my Time Capsule. Just today I have been receiving the same error message whenever I would back up my computer:
I removed my name before "MacBook Pro". It takes a long time "Looking for backup disk..." first. The disk I put with the time capsule is called Huge Backup, and in Huge Backup there is my sparsebundle file called "----- MacBook Pro." When I open Finder, open my time capsule, and then open my sparse folder, it should mount a drive where I can see my computer's backups. That doesn't work. Then I get this message:
I once again removed my name before "MacBook Pro" but I can open my sister's sparsebundle who is running Mountain Lion on the same network and her backups work fine. I have researched this topic and have tried to repair the disk in Disk Utility, remount all the drives, remove the drive and restart the backups, and even restart my computer and the Time Capsule. Nothing worked. It just was working yesterday, but now I get this in the settings along with a caution symbol in my menubar:
Is there anything I could do to fix this? Reconnecting it in AirPort Utility (5 or 6) didn't work. Also, for some reason, the error renamed Huge Backup to Huge Backup-1 as you can see above and below in the messages. I downloaded the Time Machine Buddy widget and this is the error report I got. I replaced my names or private info with [-----]. By the way, the network is called NDR Network, and the Time Capsule is alled NDR Time Capsule. Here's the error I keep getting:
Starting manual backup
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Disk image already attached: /Volumes/Huge Backup/[-----]'s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a483e6c0 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a343d430 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Mounted network destination at mount point: /Volumes/Huge Backup-1 using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a34410c0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
Failed to eject Time Machine disk image: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle
Please help!I didn't remove all of my names, so just ignore that...
Maybe you are looking for
-
im using JOptionPane.showMessageDialog... to ask the user something. the buttons are yes and no. now, how can i know if the user has clicked yes or the no button?
-
Hi, just purchased finally the upgrade for CS6 from CS5.5 Design Premium. I have a BIG problem. When I run the installation file, I put the serial for the upgrade => OK, then I have this message : "valid serial number but no eligible product has been
-
Help needed: How to import video from Canon Legria Camcorder FS306?
Dear all, After happily purchasing Canon Legria Camcorder FS306, I realise that my IMOVIE HD could not detect the camcorder when connected to my Macbook pro. Have 2 questions here: 1. Is it impossible for IMovie HD to detect newer camcorders? Should
-
Hi ! 1. In 'service call' is there any way to create 'Ticket' as in R3? 2. also can we schedule the service, to report the service call once after it is generated, via e-mail? Meera.
-
When Printing Flash Paper from Acrobat Professional, Flash paper is not able to search!
When I try to print a flash paper file from adobe acrobat professional, it prints, and it creates the flash paper file. The flash paper file is no longer search-able though, when I try searching, it just says "not found". The original PDF is search-a