Anyone elses front ear grill not line up properly on white iPhone?

Anyone elses front ear grill not line up properly on white iPhone 4S? Noticed mine is a little to one side, wanted to know if anyone elses is a little off!

Yes, mine too. Doesn't obstruct the earpiece though so it doesn't matter to me.

Similar Messages

On some sites Firefox does not lin up properly-broder lines obscure text

border lines sometimes obscures text

Can you give more details like a link to pages where you have this issue and if possible attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

My Ical is not pushing - is anyone elses?

My Ical is not pushing to my cell- is anyone elses?

Still does not work. if I add something to my laptop it shows up maybe hour or so later on my cell if at all. I have everything set up properly.
I hate to say it but it looks to me as all they did was change the .mac logo to a .me and otherwise whats the difference?
Doe sit instantly push for you to your cell? I bet not

Anyone elses contacts not being recognized by the Phone and Message apps?

Anyone elses contacts not being recognized by the Phone and Message apps? Updated to 5.0.1 on my 4S and this is what happened

am having the same problem on verizon. never had this issue on my 3G...

My front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

my front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

Did you try to set it up "as new device" without using the backup afterwards? How to set up your iPhone or iPod touch as a new device
If this does not work, get it serviced or visit your next Apple Store.

Since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

Yes... remove your finger from the camera lense.

Front Speakers Do Not Output So

Hello,
I have the X-Fi Xtreme Gamer sound card, and my speakers are the Logitech z5300e series. I do not know when this happened, but all of a sudden, my front two speakers (of a 5. set) are either outputting very quiet sounds, or none at all. I have tested these speakers elsewhere, and have swapped cables in order to make sure that my speakers were ok. Which, they were, and played the rear speaker output. Anyway, I have fully uninstalled and reinstalled the appropriate drivers several times over, and still no such luck. I have made sure that everything is set to 5., I have messed with SVM, CMSS, etc. The cables are hooked up properly. Also, I find this to be rather odd... My headphones do not work either via the Logitech remote (that's how I have always plugged in my headphones for this particular setup). It doesn't matter if I change it to the "headphones" settings within the "entertainment" section, I still get zero sound.
Any ideas would be greatly appreciated!

Bump. Anyone?
And in regards to the headphones - I got it so that it works on the right ear, and not the left. odd.

Not in love w/ the new iPhone 3G & thinking of returning it. Anyone else?

Here is my narrative of the iPhone 3G 16gb White… This is focuses on the negative aspects of the phone I have experienced in 24 hours of owning it… I am debating to Return it. Wonder if anyone else has had similar issues or thoughts…
Disclaimer:
I have had a lot of phones w/ different carriers - the majority being PDA style phones. For the most part the 1st generation iPhone has been fantastic. Realistically every phone is going to have its issues/quarks and not be perfect. But Apple did a good job w/ the iPhone 1st generation (at least in my opinion) and so I am more than eager to see their “improved” version and reward them w/ my continued loyalty.
Background:
With that said… I walked into an AT&T store and willingly renewed my contract for another 2-yrs. Coming from Verizon after many years – this is quite a sacrifice (AT&T is horrible). When buying the phone from AT&T store I had to go through strict scrutiny to make the purchase (i.e. I had to prove I was the primary account holder, have a credit card, have a driver’s license with picture, and confirm my SS#). In addition, since it was backordered I had to pay in advance w/ knowledge if I were to decide now to return it (even before receiving it) that I would be subject to a 10% restocking fee. So fast forward 7 days of waiting and I finally got the call to pick up the phone…
*Negative Issues:*
1)While walking in the sun w/ the phone “off” (standby mode)… the sun really exposed the screen LCD traits… I am not sure how to explain this… but you can see the outline of the LCD which is dark, a lighter colored perimeter about .5mm thick around the screen that was lighter colored and inactive when on, and even can clearly see the 3 sensors on the top of the black border near the ear speaker… I don’t recall the 1st iPhone looking like this at all. It looks cheap as a result.
2)Going with what I said before, now I can’t get my eyes off the .5mm thick dead border of screen that is obvious around the iPhone… its distracting and not sure why Apple left it around the screen and did not hide it or put it under the real black border of the phone.
3)Going with the above again, this iPhone is slightly wider than the previous iPhone and has a bigger black border. In essence it makes the screen look smaller when compared to the previous iPhone – although I doubt it is the actual case but rather just an optical illusion.
4)They say the plastic backing made for better grip, feel, and supposed better reception. I however don’t necessarily like the feel, its slightly wider size, and the rounded edges make its feel odd/awkward. However, perhaps I am just too use to the older iPhone and it will take some time.
5)After fully charging the iPhone, I went to a friend’s house (45mins away)… went to eat (90mins)… then to see a movie – Batman (maybe 180mins)… at this point I still had never made an actual call from the iPhone yet and sent (4) texts and did some limited playing around on the web/email and etc… (Remember I had the iPhone 1st generation so I know enough to turn Bluetooth off, WiFi off, even Push off, kept fetch on every 15mins)… so anyway… the iPhone had been on standby majority of time (I even made sure to return to home screen to stop anything from running in background) and the phone was at about 30% battery life. I checked my email for 1 minute and the I got the warning that 20% battery was remaining!
6)Upon careful look at the iPhone I noticed that I had a dead pixel on the upper right of the phone - must have been there but just noticed it now (below the battery icon and to the right of the top icon).This is not unusual I guess in manufacturing and I have complete faith Apple will swap it out for a new iPhone… no big deal… just inconvenient.
7)While home I charged the iPhone again for several hours to full charge. Still have never made a phone call on it. For about 40mins I played around w/ the menus and features… played with a few applications feature (i.e. facebook, AIM, myspace)… went on the web… looked at the GPS map feature… went back to home screen then put the phone in Standby mode… Watched TV for a few hours… looked back at phone to see the batter was 50% dead? Played with phone for 10 mins with music/photo/etc features – put it back to standby mode and watched more TV for 1 hr than looked at the phone to see it at 30% battery level. I fell asleep for a few hours and woke up to see the iPhone had died.
8)One thing I must point out… that throughout my narration/events above… whenever the phone was in standby mode I noticed it was warm to touch. It was not too hot to burn and be unable to use… but noticeably warm as if it were overheating? I thought standby was supposed turn the iPhone basically off (at least a very low power consumption level).
9)Another thing I noticed – perhaps it’s just me… but the screen seems to smudge a lot more – if not easier. The other screen was not perfect but the smudging was manageable. This leads me to believe that there is something different with this screen. Perhaps a different material or so… just something doesn’t seem the same.
10)I have had to fully charge the phone 3 times in 24hours and still have yet to make a single phone call. It would seem that just simply roaming on the 3G network is killing the battery life. Many 3rd party applications also drain the battery. For whatever reason something is running in the background that Apple has designed (maybe just the nature of 3G) that keeps it running even in standby.
*Apple Customer Service told me the following:*
1)If I return the phone for any reason (even if it is defective and etc) I will have to bay 10% restocking fee.
2)The iPhone running on 3G severely limits the phones use… they state it runs 50% less than the 1st generation of iPhone… so 5hrs talk time at most and that they recommend to people to turn off 3G and keep it in Edge. Even in Edge mode –they say the 1st generation iPhone lasts longer.
3)They tell me the weather is another feature that affects the phone – if it’s a hot day than it will be less battery life???
4)They say there has been many reports of iPhone running hot – but it’s a result of the 3G and normal…
5)They say a huge majority of the iPhones 3G have dead pixels and hardware issues...
6)I can swap out the iPhone for a new one under warranty (especially for the dead pixel)… but this will probably make it impossible for me to return to AT&T since the serial numbers would be different… so I would have to live w/ the iPhone 3G at that point...
Summary:
I am starting to think the iPhone 1st generation wasn't that bad after all. Perhaps I should just wait till much later or possible software improvements before taking advantage of an upgrade... I can always repurchase it later. Overall I am very disappointed by this whole experience due to my high expectations.

I agree... I am trying not to whine... but be helpful to others if they experience the same while get input before I make the decision to return (which I am leaning towards)… It’s still a great phone – but I expected something different. I also have been coming the internet and forums to see what other people think as well to make sure I am not being oversensitive about it. $300 for a 16gb is not buyers remorse kicking in… it’s just I am not sure if I see much of a difference from my perfectly good (8month old) iPhone 1st generation…
But yes… if all iPhone 3G were problematic it would be in the news… so I err on the side that I may be a unique situation or simply did not make a well informed decision when going to 3G.
Still… the idea of turning 3G off to get a full day of use out of an iPhone… even moderate use that most of us would expect w/o charging midway or multiple times is a bit much to swallow.
I don’t want to bash and just looking for peoples reaction. I still really like Apple and the iPhone in general.

My iPod Touch Front Camera Is Not Working Properly.

My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
Please Help.
Thank You.

The poster said he has iOS 5.1 which is the latest update.
apple81 wrote:
Hi: I had the same problem but it was fixed by performing software upgrade iOS 5. Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..

Restart deployment (.ear) does not load optional package

Hello everybody,
In our 10.3.5 WLS domains, we are using optional packages for sharing libraries between applications see [http://docs.oracle.com/cd/E24329_01/web.1211/e24368/libraries.htm|Creating Shared Java EE Libraries and Optional Packages]
The problem is that if I redeploy the library I have to redeploy the deployment. This issue only happens with the applications packaged as *.ear*. If the application has been deployed as a .war, with restarting the deployment is enough.
Would be possible to load the referenced library from an *.ear* just restarting the deployment?
Thanks in advance,
Luis

Thanks Vimala,
I have 1 ear project and 1 web service project.
Attached my ant output when I run the build.xml.
C:\wivWorkSpace\wivApp>ant build -Dworkspace=C:/wivWorkSpace
Buildfile: build.xml
init.env:
init.typedefs:
init:
build:
[echo] project.name = wivApp
init:
build:
[echo] wivWS: C:\wivWorkSpace\wivWS\build.xml
BUILD SUCCESSFUL
Total time: 23 seconds
C:\wivWorkSpace\wivApp>ant build -Dworkspace=C:/wivWorkSpace archive
Buildfile: build.xml
init.env:
init.typedefs:
init:
build:
[echo] project.name = wivApp
init:
build:
[echo] wivWS: C:\wivWorkSpace\wivWS\build.xml
init.env:
init.typedefs:
init:
stage:
[delete] Deleting directory C:\wivWorkSpace\wivApp\.staging
[mkdir] Created dir: C:\wivWorkSpace\wivApp\.staging
[copy] Copying 13 files to C:\wivWorkSpace\wivApp\.staging
BUILD FAILED
C:\wivWorkSpace\wivApp\build.xml:192: The following error occurred while executing this line:
jar:file:/C:/BEAPLA%7e1/WEBLOG%7e1/workshop/lib/wlw-antlib.jar!/com/bea/wlw/antlib/antlib.xml:91: The follow
ng this line:
C:\wivWorkSpace\wivApp\build.xml:204: The following error occurred while executing this line:
Target `stage.to.ear' does not exist in this project.
Total time: 15 seconds

The front row is not working. Remote control not triger,

Front row is not working, Remote control no response, command-esc not triger as well.
check keyboard shortcut from system preference, there is no front row.
anyone know why?

Ok first try it in another Account.
1. Open the account system pref window (System Preferences > Accounts)
2. Click the plus button at the bottom
3. Specify an account name (ex: test)
4. Add account
5. Logout of your current account, and login to the newly created one
If it works, then something was wrong with your account, move your files to the new account, and delete the old one.
If it did not work:
1. Try the reinstall again (DO NOT DO "ARCHIVE AND REINSTALL", as this may keep some file that is hindering FR from operating correctly
2. Make sure the FR file is in the Core Services Folder (Macintosh HD/System/Library/CoreServices/Front Row.app)
3. Make sure that you do not have the IR sensor turned off on your computer (System Prefs > Security > Uncheck "Disable Remote Control IR Sensor")
4. Make sure that your remote is paired (http://docs.info.apple.com/article.html?artnum=302545)
5. Make sure that the Command + Esc key is setup to respond by opening front row:
(1) Open system prefs
(2) Open keyboard & mouse prefs
(3) Click keyboard shortcuts
(4) Scroll down until you see front row
(5) Assign the Command + Esc key if it is not mapped
6. Finally, if all else fails, call AppleCare while your computer is still under warranty
Hope this helps,
Cory

X-Fi Titanium PCI Express front pannel connection not working

<font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
<font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
Best of luck and .......
Message Edited by jmacguire on 07-06-2009 :09 PM

Anyone know what causes thin vertical lines on my iMac screen?

Anyone know what causes thin vertical lines to appear on my iMac screen?

Hello,
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
Take a screen shot & view that in Preview, move the Preview window around, if you see double lines it's a Video card/VRAM problem, if the lines do not move moving the pic around then it's the LCD or cable.

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store.

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact

Anyone elses front ear grill not line up properly on white iPhone?

Similar Messages

Maybe you are looking for