Anyone experience a loose screw out of hard drive frame shorted out the laptop ?

HP Compaq Presario CQ62-225NR notebook. Less than 1 1/2 years old.
Notebook would not start...no lights on with power cord plugged in.
Picked it up to take out the battery and heard something loose bouncing around inside.
Trying to get the loose object out, started to remove the hard drive. On one side of the hard drive,
1 screw was missing and another was loose. The 2 screws on the other side were fine.
So what was bouncing around in the machine was a screw from the hard drive frame and looks like it shorted out the PC.
Anyone seen this before ?
Anyone have any luck getting HP to honor a defect after the warrantee expires ?
Thanks, Ken

I have only seen it when the screw was unscrewed. How would a screw come out of the hole? You can try with HP but they are pretty literal about the warranty terms.

Similar Messages

Drive Module Screws for attaching hard drive to module

I have been searching far and wide for 6-32, .25 inch long screws that match the original screws shipped with raid drive modules. I stumbled across a post for a european company that won't sell or ship to the USA, but the spec sheet they sent me is not the same screw. I can't believe these screws are not available anywhere in the US. They appear to be a custom manufactured item. Does anyone know where I can buy 100 to 200 and not pay a fortune for them? Thanks!

I do understand. But, your original question was "is there a difference in attaching a hard drive to the AEBS using the ethernet port vs. the usb port" - and the answer is that there some very significant fundamental differences in these two types of connections. Comparing a USB drive and a NAS device is almost like comparing apples and oranges.
If you are connecting a hard drive via USB to the Base Station's USB port, then you are effectively using the combination of the USB drive and the Base Station as a NAS drive. Data access speed, connectivity problems, security and so on are completely determined by the Base Station's hardware and its USB connection to the drive. Network communications problems with the USB drive would all be the fault of the Base Station, not the drive. USB interface hard drives are fairly dumb devices all by themselves - they consist of little more than a box with a hard drive and a USB interface.
Contrast that with a device designed to function as a NAS device. These devices connect directly to a network - whether or not that connection happens to be one of the LAN ports on the Base Station is of no real importance. The NAS could be cabled to an ethernet switch which in turn is uplinked to one of the Base Station's LAN ports - and nothing would change. With a NAS device, Data access speed, connectivity problems, security and so on are completely determined by the NAS device. None of these factors are determined by the Base Station it happens to be connected to. Network communications problems with the NAS device would all be the fault of the NAS device, not the Base Station. NAS devices are (in contrast to USB hard drives) a fair bit more intelligent, since inside their box is not only a hard drive and an ethernet interface, but also a processor, memory, and software that provides all the functionality of the file sharing component of OS X and/or Windows.

I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

Does anyone know if the Toshiba 240GB 1.8" MK2431GAH Hard Drive will work in the 4th gen iPod Photo?

I've been considering buying a Toshiba 240GB 1.8" MK2431GAH Hard Drive for my 4th gen iPod Photo. Does anyone have any information about this product and if it will work? Would I have to also get a thicker back panel?

And the reason is because the connector on the later versions of the Toshiba 1.8-inch hard drives is different.
The older type that works with your iPod goes up to 60GB. There are two physical sizes, base on whether the drive has one platter or two platters, and these correspond to the "thick" and "thin" iPod back panels.
I have a 4th gen iPod with a standard compact flash card for storage, which replaces the hard drive through an adapter. I believe it's this one, or one like it
http://www.ebay.com/itm/NEW-Compact-Flash-CF-SSD-To-Toshiba-IPod-1-8-inch-Adapte r-Black-/121174875639
It fits in the "thin" back panel. The only modification I needed to make was bending over the pair of "jumper" pins that sets it for master or slave (needs to be set for master). Currently, I only have an 8GB CF card in there, but it works great. At some point, I may get a 64GB CF card for it. Solid state storage is much better than a hard drive for everything except sheer capacity.

I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
Feeling vulnerable. Please help.
SusaninNY

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Problems getting an external hard drive to work on the new Airport Extreme

I have spent hours trying to get my 320GB external hard drive to work with the new airport extreme 802.11N. I have spent hours pouring over all of the posts here discussing possible solutions, all of which have not worked. This morning, however, I gave it another try and FINALLY, I have it working. I tried something simple. Here it is:
Using the Apple Disk Utility Program, I formated my drive using the MS-DOS mode, called my Hard drive "ItunesHD". It took about 20 minutes to complete (i'm assuming because of the size of the drive). I then unplugged the router and hard drive, turned on the hard drive, then the router. After my macbook pro reconnected, I clicked on the iDisk utility icon in my menu bar, provided my password and FINALLY saw the network drive icon on my desktop!!! It seems that formatting my drive using MS-DOS compatibility mode finally worked for me. I'm not saying this will work for anyone else who is having this problem, but you can at least try it. I tried all of the MAC formatting options and have had no luck.
What I would like to know now is (..if anyone has these answers, please let me know):
1. What is the maximum SINGLE drive capacity that this router will understand...500GB, 1TB, 2TB? I would like to get the biggest bang for my buck.
2. Keeping #1 one in mind, I purchased an Apple TV (still waiting on it to arrive) and I would like to know if it will read multiple hard drives connected to the Airport Extreme router (...say (2) 500GB hard drives). I know you can have multiple libraries in iTunes (which to me is a cheesy solutions, there should be an option in the preferences that would allow you to save your music in one place and your movies in another). Anybody have any idea on this one?
I basically want to rip all of my dvd movies on a big hard drive connected to my airport extreme to use with my AppleTV , so I just need to find out about the maximum size and hooking up more than one hard drive and getting the AppleTV to recognize them all.
thnks
MacBook Pro Core Duo Mac OS X (10.4.8)

Sorry you had so much trouble hooking up a hard drive to the base station. I've done some experimenting with the feature and this is what I've found out.
You can use either the native Mac format, Mac OS Extended, or the Microsoft format known as FAT. Apple calls FAT, MS-DOS File System in Disk Utility.
If you use Mac OS Extended, the Macs on the network will be able to connect to the drive using the native AFP (Apple File Protocol) or the Microsoft native SMB (Server Message Block) protocol. PCs will only use the SMB protocol of course.
If you use MS-DOS File System both the Macs and the PCs will only use SMB to connect to the drive over the network.
Basically I've found everything works as expected with regard to volumes connected to a network.
One thing I don't have installed is the iDisk Utility. I'm wondering if it may be the cause of the problems you were having. But reading through your post it may also be the difference between expected behaviour and the proper procedure for discovering and mounting network volumes. Let me explain.
You only mention having trouble getting the drive to show up on your Desktop, you didn't describe how you went about discovering the network drive. It isn't just suppose to show up on your desktop when you plug it in to the Extreme base station. It doesn't work like the iDisk or disks connected directly to your computer using USB/Firewire.
Normally with network drives you're suppose to either browse for them using the Network icon in the Finder or using the Connect to Server command in the Finder's Go menu, you would type the address in directly for the network volume you want to mount. Try it and see what happens.
Now to answer your other questions.
I don't have a volume large enough to hit any limits the base station may have but I did read a post about someone who said they had a 1.5 TB volume connected and could only see 1 TB of it. They were forced to partition the drive to see all available space and of course the volumes showed up as two separate drives. One thing wasn't made clear though. They didn't say what volume format they were using to format the drive, Mac OS Extended or MS-DOS.
Everything having to do with the AppleTV is just speculation at this point since no one has one yet but from what has been demonstrated so far, AppleTV relies on iTunes. In other words, it won't pull data from network volumes on its own, a computer running iTunes needs to feed it.

Recently my keyboard on my macbook pro died. i backed up the machine to my Seagate 500GB hard drive, successfully, and sent the notebook in for repairs. Now that the macbook is repaired, i can read from the seagate, but not write to it. It says read only.

Recently my Macbook Pro's keyboard failed. Using my wireless keyboard, i managed to backup everything to my 500gb Seagate external hard drive. I sent the machine in, had the keyboard repaired, and now the machine is back, and i am loading my content back onto the macbook. My problem is that the drive is now read only, and i have searched for all the obvious fixes. The lock on the permissions secion of the info block on the drive. (not present). I have even tried disk utility, but all the options are greyed out.
I am a graphic designer, and so i use my external drive extensively to move artwork around, so it is important that i can make it writable. It worked perfectly on this very same machine, two weeks ago, and nothing has changed on the drive, so i can only assume it is a software issue on the operating system.
I have read through all the forums, etc, and can find nothing that works. I am loath to change anything on the drive, as it was working perfectly on this system before the system went in for its repair.
Any help would be greatly appreciated.
-Captain Zub-

Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

I am attempting to replace a failed hard drive on a F500 Vista laptop. I have a home premium recover

I am attempting to replace a failed hard drive on a F500 Vista laptop. I have a home premium recovery DVD (1 of 1) and It runs the recovery after a while of loading, and it creates a 24GB partion and loads about 2.6Gb of information on it. the it ejects the disc and asks if I have any suplimental disks, which I don't have. Then it reboots it's self and cycles through reboots for 5 hours, yes I let it do this for 5 hours as the HP site says it could take several hours.
After this I finally shut down the computer and loaded the hard drive in an ext case and retrieved the above information. I also note that the 250GB drive is shown as a 24GB drive, so I guess it hasn't completed the partions?
I never get to a Vista window.
This hard drive does pass the laptop's Bios hard drive check (the former 80GB drive did NOT) and was used to store Old Time Radio shows, until I went to a larger drive.
The Laptop has a dual core Athlon TK-53 processor and the recovery disc is for 32 bit Vista (and the label in front and license on back don't state Vista 64, just Vista)
So, Do I need a Vista 64 recovery disc? Should I download the available driver on the HP site and slap in that disc when the Recovery disc finishes and asks for supplimental discs? Might thngs indicate other issues with the laptop?
I've loaded from scratch XP several times, but this is my 1st Vista experience. Thank you for any help!

Okay. So I was able to install, and format the new internal HD. Was able to install Lion then Mavericks. Next, is to try to retrieve my data from my failing old HD. I bought an enclosure (sled), and have my HD hooked up to my laptop, and it finally showed up in Finder. So. Now. What is next? I am seeing a screen that shows these folders: Applications (translate for the PC me = Programs), Library (I am assuming?? these are my various files such as docs, photos, music, etc.) System, opt, and Users. Should I just try to drag and drop some/all of the folders onto my desktop, then open up the folders and do something with the contents? Sorry to sound so vague and frankly, rather dumb-sounding, but the nomenclature with a Mac is a bit different than with a PC, and Finder is a little different looking to me than Windows Explorer. I am relieved to see that I was even able to get this failing drive to show up in the first place, so I feel a little like I could be on borrowed time with it. I think it may just be bad sectors, since I don't hear any clicking or other mechanical issues with the drive as it spins. But, any further help with retrieving the data would be VERY much appreciated!!

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing?

HT1751 My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used). ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!

This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2

Wipe my hard drive clean except for the OS whats the best way?

I need to wipe my hard drive clean except for the OS whats the best way?

From Kappy (note: with this method, you will need to update to the present OS version using the appropriate Combo Update from Apple Downloads.)
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities (Installer menu if using Panther or Jaguar) menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
https://discussions.apple.com/message/12364050?messageID=12364050#12364050

How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

Just use the archive utility on the disk page of the airport utility manual setup..
If you have lion and v6 airport utility.. it missed out. On lots of things.
Download and install the real.. UTILITY
5.6 http://support.apple.com/kb/DL1482

Several questions regarding an upgrade or replacement hard drive. Short dst failure error.

HP Pavilion DV6z-2100
Windows 7 64-bit
Short-DST failure error
1) I'm wondering if I can upgrade my hard drive to a 1TB and/or a 10,000rpm instead of the 500GB 7200rpm. Would there be any problems for either upgrade? What effect will the rpm's have (5400/7200/10000) and how do I decide which is best for me? Can I change from HDD to SDD? Can I change brands? What size (in inches or cm) must the new hard drive be? (See hard drive info below.)
2) I believe I can access (and open) all my files on the failing 500GB HDD. I want to install a second OS (Ubuntu) on my new hard drive, and I think the best way to do it would be to put Ubuntu on another partition. How would I go about copying my files to the new hard drive without losing any data and keeping my Win7 license? How would/should I partition the new hard drive? I can boot Ubuntu via a flash drive--can I make a Win7 recovery disk if Win7 won't boot?
3) How urgent is getting my files off the short-dst error hard drive?
Hard drive product number:
575476-001
Here's what's listed for hard drives on page 53 of the service and maintenance guide (PDF file):
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSer...
(Apparently PDF file links can't be shortened by bit.ly.)

The following statement is copied from the Maintenence & Service guide for the HP Pavilion dv6 Entertainment notebook. for your notebook.
"Supports all Serial ATA (SATA) 9.5-mm, 6.35-cm (2.50-inch) hard drives".
Any first generation SATA 9.5-mm, 6.35-cm (2.50-inch) hard drive should work without issue. I do recommend that you use the Tune-Up utility in the HP Support Assistant to update your BIOS.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contactin

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contacting you

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

Anyone experience a loose screw out of hard drive frame shorted out the laptop ?

Similar Messages

Maybe you are looking for