Anyone experiencing severe problems with Aperture3 after loading Lion?

I am experiencing severe problems with my Aperture 3 programme since installing Lion OSX, in fact it is almost unusable after about 15 minutes operation. My computer is only used for photography and is otherwise unburden. I would appreciate any help at allplease.

Try the Aperture forum, and you might want to describe the issue in moe detail there to get help.
Regards
TD

Similar Messages

  • Is anyone else having issues with airplay after the Lion update?

    Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...

    I'm having the same issue.  So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?

  • Problem with costcenter after loading

    Hi Experts,
    i can't find my costcenter in master data table /BI0/PCOSTCENTER after their loading. When i go to maintain the master data through the button maintain i can see the costcenter there. But i can't see it in the table /BI0/PCOSTCENTER. In order to create the costcenter in the table /BI0/PCOSTCENTER i have to go to the table for maintaining the costcenter master data. I have to select the costcenter and go to change it. I don' change it clicking ok and then i have to save the master data and then i can see it in the table /BI0/PCOSTCENTER. When the user call  the costcenter hierarchy they see for example something like that:
    #/Text of costcenter. The key is #. Does anyone have an idea what the problem is?
    Thank you in advance for your help.
    Best Regards,
    Ali

    Hi Ali:
       Did you activate the Master Data for the 0COSTCENTER InfoObject after loading the new data?
    If not, try this:
    1. Activate Master Data.
    - Right click on 0COSTCENTER InfoObject and select the "Activate master data" option.
    2. Execute Change Run.
    - Click on the "Tools" menu and select the "Apply Hierarchy/Attribute Change..." option, click on the "InfoObject" button, select the 0COSTCENTER InfoObject if available, click the "save" button. Click on the "Execute" button.
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on Sep 10, 2010 12:20 PM

  • Has anyone experienced a problem with FB posting since the installation of iOS 6?

    Since the installation of iOS 6, I noticed that when I post a photo on FaceBook it does not show that post using my iPad or iPhone. I posted using my iMac and within seconds it showed up on two devices mentioned above. Please help.

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch/Ipad/Iphone/Ipod Classic, so I will try to find a solution to your problem.
    Do the IOS update (the one that is the latest)
    Reset All Settings: SETTINGS>GENERAL>RESET>RESET ALL SETTINGS
    Use it until it dies (automatically shuts off)
    Plug into Charge
    Leave it 1.5 hours or longer after it reaches 100% --> Undisturbed (preferably overnight)
    Give it a few days to Calibrate
    This has helped me on my Ipod Touch 4th generation, running IOS 6.0.1
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • Anyone else having problems with Mail after installing Mountain Lion?

    Since upgrading to mountain lion, I have had a number of problems with Mail.  At the moment, it is predominantly when my desktop imac goes to sleep overnight. In the morning, it will not receive mail. The app will not close, so I force quit it.  Trying to reopen Mail after that just does not happen, so I have to restart my machine to get things going again. Any tips?

    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Since I installed Mountain Lion on my new MacBook Pro Retina (august 9) I have severely problems with Safari / Internet / loading webpages. Have had Apple Support

    Restarted the MacBook ... Same problems!!! Even worse now!!! PLEASE APPLE ... solve the problems with Mountain Lion!!!

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro
    Oh, and try the Safari forum instead.
    https://discussions.apple.com/community/mac_os/safari
    You are talking to end users, not "Apple"
    Go back to :Lion maybe until Moutain Lion has had more time to get optimized and ironed out.

  • Problems with iWeb, after installing Lion

    Hi,
    Ever since I installed Lion, I have been having problems with iWeb. Any changes I make in iWeb, and then publish to my site, via mobileme, are not saved, and the site reverts to the orignial site, after closing the website, and iWeb also loses the cahnges. I am unable to sue the Publish Site button, and the option for Publish Site changes is not available.
    I am using iLife 11.
    These problems have only occurred since I installed Lion.
    Any help greatly appreciated.
    Nozza

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    You can download an already compiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Problem with mail after mountain lion install

    Mail has become sluggish to locking up after Mountain Lion install.  I get the color wheel each time I start typing in an address to send an email.  I also get the wheel when i am typing an address or name in any web page in Safari.  Is this a Mail Problem or an Address Book problem?

    It sounds like your computer needs to be cleaned up. Have your repaired permissions or cleared caches since you got the computer. Often times when upgrading operating systems permissions get screwed up and it causes issues.  Go to disk utility in your "other" folder in applications.  Select disk utility, then on the left hand side choose Mac HD then click REPAIR permissions in the center section. Wait for it to finish, restart your computer, then test.

  • Problem with mail after downloading lion

    i just loaded lion.  opened mail, i have new messages however they will now open in the reading pane "loading"

    Resolved by: https://discussions.apple.com/message/15671355#15671355
    Working fine!

  • Has Anyone experienced a problem with trying to install a new app or reload a purchased app? After I had upgraded my ipad to 6.01 started having problems with updating my apps. Kept getting unable to Purchase. Please try again later.

    Any Help would be appreciated.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Has anyone experienced a problem with the adjustment brush since last update (for Mac) last week?

    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape). When I release my mouse, the adjustment I've made affects my entire image. I had no issues with adjustment brush prior to the update. I've been on the phone with Adobe support (no help). Have uninstalled/reinstalled Lightroom several times (no help). Adobe directed me to Apple (recommend use of Time Machine to date before Lightroom update came through). To ensure it's an isolated bug, I checked my MacBook Pro. Worked fine without update; I let update come through and find the adjustment brush "bug" is intermittent. When it occurs, however, I always see the larger "box" area, and the adjustment brush ultimately affects my entire image.
    Anyone else experiencing this? Adobe support insists it's a Mac issue. Thanks!

    Hi,
    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
    Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now.

  • Has anyone experienced a problem with iPad2 charging?

    Help

    Hi,
    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
    Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now.

  • I am having problems with iChat after installing Lion, can anyone help?

    I installed Lion this week after I installed everything seemed to be working great. However, if I open iChat and then log in and log out it will not let me log back into iChat

    Try logging on to AIM on port 443 rather than port 5190.
    Go to IChat in the menu bar > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443(press return/enter(you might have to tick and untick SSL for 443 to stick)).
    Log back in again.

  • Problems with scrolling after mountain lion download.

    I just downloaded mountain lion today and ever since the download I am having issues with the scrolling for my magic mouse and trackpad. My problem is when I scroll down on my mouse or trackpad it actually goes up on the page and vice versa. I have seen others have had some scrolling issues but not exactly the same as mine. Just wondering if there is any known fix for this problem? I did the PRAM reset and also the SMC reset and that didn't fix the problem unfortunately.

    Look in System Preferences > Trackpad (or mouse) > Scroll & Zoom tab > uncheck Scroll direction: Natural.
    The scrolling direction has been changed to a technique where your push the screen up or pull it down, takes a few days to get used to.  The swipe directions will also be affected by this change.

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

Maybe you are looking for