Anyone familiar with forms and snippets

anyone familiar with forms and snippets in IWEB?

An easier way?
Sir, anything beyond iWeb requires effort.
Find a form creator, such as wufoo, and display the form in a html snippet with an <iframe>. In the end it's the same, whether you create the form from scratch yourself or use a service :
http://wufoo.com/
My webhoster provides a formcreator :
http://one-docs.com/tools/formmailgen/
The code is very basic, so one has to dress it up a bit. See if your provider offers a similar service.

Similar Messages

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

  • HT201415 After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?

    After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • Anyone familiar with "The Standby Wizard for Oracle "

    Is anyone familiar with "The Standby Wizard for Oracle " by Relational Database Consultants, Inc?
    It is a GUI app that supposedly simplifies and automates the creation, maintenance, and switchback functions necessary to implement Oracle's standby database paradigm for high-availability.
    I have a very small IT shop and simplification with data protection is important to me.
    I'd like to read anyones thoughts if you have such.

    Hi
    I never used this tool. However it is important that you have the right infrastructure, too. A standby database wrong implemented is useless. You can try to call a consult in near you to implement the dataguard.
    Does Relational Database Consultants has a documentation about the product?
    Bye, Aron

  • Anyone familiar with TotalCode for Premiere?

    Anyone familiar with TotalCode for Premiere?
    http://www.rovicorp.com/products/distribution/content-production-tools/totalcode-for-adobe -premiere-pro.htm#overview

    found no reviews on the net - no user experience - no articles in magazines nothing at all...
    GPU accelerated H.264 encoding sounds great if the quality is ok...
    reading and creating Digital Cinema Packages (DCP) direct from the timeline also is a huge timesaver...
    hmm - I'll try the demo if I find the time...
    nw42

  • Anyone familiar with thunderbolt bridge on a mac air?

    Greetings cyber community,
    anyone familiar with Thunder Bolt Bridge on the Mac Air...it seems to be set up on my computer, & I have no clue..
    Thx

    Hi sorry been off for a few days.
    Not a chance you are being hacked through that unless you have a cable attached to that port.
    Is your mac being hacked or your wifi connection?
    Check out the security and privacy system preferences.
    Is your Firewall up and running?
    Check you settings he may be getting in piggy back on an app you are allowing.
    Maybe you should consider using FileVault to encrypt your HD.
    Hope this helps.
    PJRS

  • Do Oracle Developer Suite contains Oracle AS with Forms and Reports?

    Dear All,
    I am having Oracle Developer Suite 10g.
    Using that i can design and test Oracle reports.
    Then do i need Oracle Application Server with Forms and Reports to deploy it?
    Do Developer Suite contains Application Server with Forms and Reports?
    How to test whether the report will run inside an application server?
    If i am having Developer Suite and still do i need to install Oracle AS with Forms and Reports?
    DO revert.
    Thanks in advance.
    -Sameer

    Hi Sameer,
    Q1 Iam having Oracle Developer Suite 10g.
    Using that i can design and test Oracle reports.
    Then do i need Oracle Application Server with Forms and Reports to deploy it?
    Yes you need Oracle Application Server to deploy forms /reports.There are 2 types . One containing only forms and reports services
    Two containing forms, reports services, portal and many
    other product services.
    So if you want to deploy only forms and reports then choose the first one
    Q2 Do Developer Suite contains Application Server with Forms and Reports?
    No. It contains a light component called OC4j. With this u can test the forms and reports in browser
    Q3How to test whether the report will run inside an application server?
    If you test it with developer suite, it should run fine with AS
    Q4 If i am having Developer Suite and still do i need to install Oracle AS with Forms and Reports?
    Pls note that Developer suite doesnt have any AS. And it has a light weight OC4J which is only for testing purpose. So u need to have AS for the deployment.
    Rajesh ALex

  • Anyone familiar with Flash Presentations?

    Hi.
    I continue to have problems playing movieclips on certain
    slides of a Flash Presentation.
    If anyone has *reasonable* experience with Flash
    presentations please let me know. You might be familiar with the
    problem, or have suggestions.
    Thanks in advance,
    K

    chez Lou,
    > 1. Would I be better off just placing everything on the
    main
    > timeline, and saving the use of mc for animations that
    can play
    > continously (for instance animations that "accent" the
    content
    > of the slide, vs those used to put the content
    together)?
    Well, that would certainly be one approach, but then you
    lose out on the
    benefit of nested movie clips, not the least of which is
    avoidance of
    timeline sprawl. I played a bit more with the Slide API this
    morning. I
    can see what's going on. Under the hood, each slide is a
    movie clip, and
    they all exist at once, so if you have nested animation on
    any slide ...
    they all start playing even on slide 1, and might in fact
    have played
    through by the time you hit slide 5.
    > 2. Do you know of a way to have an animation stop on the
    last
    > frame, yet replay on slide re-entry?
    Here's what I came up with. Let's assume you have two
    buttons on the
    root presentation slide. By default, Flash gives you a root
    slide named
    "presentation" and a child slide named "slide1". In my
    experiment, I added
    a Next and Previous button to "presentation" and wired them
    up like this:
    btnNext.onRelease = function():Void {
    this._parent.currentSlide.gotoNextSlide();
    btnPrev.onRelease = function():Void {
    this._parent.currentSlide.gotoPreviousSlide();
    This uses the button event handling approach I prefer,
    personally, over
    on() and onClipEvent() -- I'm not sure which approach you're
    using. In this
    approach, the code codes into a keyframe, typically a
    dedicated scripts
    layer, rather than attached to the object itself. The buttons
    have the
    instance names btnNext and btnPrev. A function is assigned to
    the
    Button.onRelease event of each button instance, and the
    functions call
    either Slide.gotoNextSlide() or Slide.gotoPreviousSlide() as
    appropriate.
    In order to target the relevant Slide instance, I use the
    Slide.currentSlide
    property, which I reference via the expression this._parent.
    Let me explain that, real quick. In the above code, the word
    "this"
    refers to the corresponding button instance itself -- in
    btnNext's onRelease
    handler, "this" refers to btnNext. btnNext -- the button
    symbol -- is, by
    nature, an instance of the Button class. Consulting the
    Button class in the
    ActionScript 2.0 Language Reference, I see that all button
    instances have a
    Button._parent property, which points to the object that
    contains the
    button. Cool. Therefore, from a button's point of view,
    this._parent
    refers to the timeline that contains the button. Normally,
    such a reference
    points to a MovieClip instance (which is what timelines are;
    they're movie
    clips). That's the case here, too, but thanks to the way
    object-oriented
    programming works, and because we're inside a Slide
    presentation, the parent
    movie clip of this button is also an instance of the Slide
    class.
    Look up "Slide class" in the Components Language Reference,
    and you'll
    see the full pedigree. Any instance of Slide has the
    following family tree:
    MovieClip > UIObject > UIComponent > View >
    Loader > Screen > Slide. Slides
    *are* movie clips, but they're more than that. They're also
    UIObjects,
    which are objects that contain all the functionality of movie
    clips, and
    then some. They're also UIComponents, which addes even more
    functionality,
    and so on ... all the way through Slide. One of the
    properties of the Slide
    class is Slide.currentSlide. Bingo!
    So ... this._parent (in this context) refers to a Slide
    instance, which
    means this._parent.currentSlide refers to the currently
    showing slide, which
    is obviously also a Slide instance. For that reason, we can
    still invoke
    Slide class methods on the reference, which is why something
    like
    this._parent.currentSlide.gotoNextSlide() works.
    Forgive me, by the way, if you already understand all of
    this. Forum
    replies are searchable, and who knows ... in the future, the
    explanation has
    the potential to help someone else, too. :)
    Okay, so now the issue is, we want each current slide to run
    through any
    nested movie clips it may have, regardless of their instance
    names, and tell
    each movie clip to start again from frame 1 of its own
    timeline. Amend the
    above code to look like this:
    import mx.screens.Slide;
    btnNext.onRelease = function():Void {
    this._parent.currentSlide.gotoNextSlide();
    var slide:Slide = this._parent.currentSlide;
    for (var prop:String in slide) {
    if (typeof(slide[prop] == "movieclip")) {
    slide[prop].gotoAndPlay(1);
    btnPrev.onRelease = function():Void {
    this._parent.currentSlide.gotoPreviousSlide();
    var slide:Slide = this._parent.currentSlide;
    for (var prop:String in slide) {
    if (typeof(slide[prop] == "movieclip")) {
    slide[prop].gotoAndPlay(1);
    The import statement allows us to reference Slide as a
    datatype, which
    happens just below the line in each event handler that was
    already there.
    To save a few keystrokes (basically, to make the code easier
    to read), we're
    creating a temporary variable, slide, and setting it to the
    same
    this._parent.currentSlide expression we already used. Once
    gotoNextSlide()
    or gotoPreviousSlide() is called, the value of
    this._parent.currentSlide
    changes, because now a *new* slide is the current slide. It's
    the new slide
    we're interested in. Using the variable slide as a kind of
    shorthand, we
    use a for..in loop to run through all the properties of the
    current slide.
    If the datatype of a given propery is a movie clip, we tell
    it to go to
    frame 1 of its own timeline and start playing.
    What I've spelled out may or may not fit, exactly, with your
    current
    circumstance, but that's why I spent a bit of time explaining
    the mechanics
    of it. I hope that steers you in a useful direction. :)
    David Stiller
    Co-author, Foundation Flash CS3 for Designers
    http://tinyurl.com/2k29mj
    "Luck is the residue of good design."

  • Is discoverer  included with forms and reports ?

    Can anyone confirm whether Discoverer is included in the forms and reports server installation (10g) or does it require the full application server.
    Does it need the infrastructure database ?
    Is there a discoverer forum ? ( I can't find it )

    Kevin,
    in 10g R1 in the Forms&Reports-Installation there's only installed, what Forms and Reports need (HTTP, OIC4J, ..). Discoverer can only be installed with the full Enterprise Edition Installation which needs an infrastructure.
    This could change in future, but now there's no way around the infrastructure for Discoverer.
    By the way: Discoverer Forum is Nr. 56:
    Discoverer
    regards
    Rainer

  • Can anyone help with iPlayer and Sky Mobile?

    Ok, I'm so close to giving up with this useless phone. There are 3 apps on my N97 which give me a constant headache.
    BBC iPlayer
    Sky Mobile*
    YouTube
    *I should point out that I only use Sky Mobile to set recordings on my Sky+. I do not use it for, nor have any desire to use it for actually watching Mobile TV.
    All of these apps work absolutely fine over my home WiFi network. It's when I try to use them over 3G (my Vodafone Live! connection) that I start running in to trouble.
    All 3 give me connection problems, errors, and simply refuse to load half the time when on 3G. I got so annoyed I just did a hard reset the other week, and magically all three started working again. However, now 2 of them are failing me again. YouTube (touch wood) is working fine at the moment, but iPlayer and Sky Mobile just aren't.
    iPlayer sometimes works. But sometimes I get script errors (unable to load content), and sometimes it says something about checking my connection settings. I wouldn't mind but it's not actually possible to access any options for the iPlayer. Even in application settings there are no options you're able to set.
    Sky Mobile simply flat out refuses to work ever on 3G. But it did after I did a hard reset for a couple of weeks, now it just stopped working! It wont even load. It just gives the error message 'Unable to connect to network - please check connection settings" or something along those lines.
    I've tried so many different things. Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live! all the time, tried setting my video streaming settings to WAP, all sorts. Every combination I can think of.
    I just can't wait to get rid of this phone. I've put so many people off buying one. They see it and think it's all swish and cool, and I just say 'Don't. You'll regret it'. I can't wait for my contract to be up so I can upgrade to an iPhone now Vodafone have got them.
    Can anyone help with these problems? Thanks in advance, but I don't hold out much hope...

    About iPlayer.
    Have a chat with Vodaphone. Streaming iPlayer over 3G IS allowed on Vodaphone contract, unlike my O2 contract. As long as your contract allows it, and you have the correct AP address, it should be fine. Vodaphone should be able to give you the setting.
    Mine only works over Wlan.
    FWIW, "... streaming over 3G is not currently available on iPhone handsets on any mobile network".
    p.s. Just to be clear. You say  "Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live!".
    iPlayer uses the Nokia browser "Web". So that's where you should make the setting "Ask when needed". It should then offer you the choice of whatever you've set in Destinations> Internet> then select whatever you've chosen as your GPRS connection.(as advised, or sent to you by Vodaphone).

  • How to install Discoverer 11g on Web Logic Server with Forms and Reports 11g Rel2

    Hello,
    We finally started to migrate from Oracle iAs 10g Release 2 to Oracle Forms and Reports 11g Release 2 using Web Logic. I don't see an option to install Discoverer on the server.
    My OS: windows 2008 R2
    Installed Web Logic 10.3.6
    Forms & Reports: 11.1.2.2.0_64 (64 Bit Forms)
    How do I install Discoverer Plus in 11g? All I can find is Discoverer 11g Desktop/Administrator to run on User work Station. We were using discoverer Plus in 10g iAS.
    Thanks
    Rao

    907485 wrote:
    Hi:
    I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
    under that I have
    Accept clipboard from viewers
    Send clipboard to viewers
    Send primary selection to viewers
    From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
    What is next? How do I connect to the server. (When I login I used hostname:1)
    Thankyou.we only know what you post.
    where does linux reside?
    where is VNC installed?

  • Issues with editing in Acrobat 5 with Form and link tool

    In my version of Acrobat 5, I used to be able to edit with the form and link tools. Now for example if I try to add an action in the execute menu item in the Field Properties (Form tool or Link mode), it brings up a splash window saying 'Please select the menu item you want to execute from the menu bar' and that is it, It does not bring up a list so I  can not add an executable item.
    PowerBook G4 (ti) - Mac OS X 10.4.11
    Any ideas, as it is really frustrating.

    Ok... so I have created a file in InDesign and exported it as a .pdf to create an interative document.
    I am trying to add next page from page 1 and so on, and also hyperlinks to e-mail addresses.
    I create a box by dragging using Form Tool (F) whereby Field properties window pops up.
    I Name the item and choose what type of button I require, and modify the settings in Appearance.
    When I then go to choose an Action... I choose mouse up, then Add... which brings up the Add an Action window.
    I choose 'Execute Menu Item' from the drop down list and then try to 'Edit Menu Item' this brings up a further window 'Menu Item' with the message "Please select the menu item you want to execute from the menu bar" and here I try to choose the type of item I need to execute.
    I have tried clicking on the item on the menu bar, but it makes a faint sound when I click with my mouse... but no no item is executed.
    I have done this before with previous documents, but not for a while... but it does not seem to want to do it this time around.
    However, I can execute the following in the same window 'Edit Menu Item'
    Import Form Data
    JavaScript
    Movie
    Open File
    Read Article
    Reset Form
    Show/Hide Field
    Sound
    Submit Form
    World Wide Web Link
    Any thoughts?

  • Anyone familiar with Magic Bullet software??

    If so, I have a question. With all the new cameras that have features such as "cine-gamma" and more detailed control over color and image, is it necessary to even purchase/use something like MB anymore? I was interested in it at some point in the past, seeing as how the filters could help you achieve the elusive "film look." But, it seems these new cameras have that issue covered by processing it for a "film look" as they record, instead of you trying to fix it in post with MB.
    Anyone had experience with MB and/or new cameras mentioned (Panasonic DVX100, for example)? I'd like to hear your thoughts. I'm beginning to look at new cameras; I've had my XL1 for nearly 6 years now, and although it's still a workhorse and still going, I'm liking what I'm seeing on the market.
    Thanks,
    Sean Kirkland

    I have the Magic Bullet Movie Looks plugins. I also use a Sony HVRZ1U (which does NOT have true 24P) and tonight, as a matter of fact, I'm doing a shoot using a DVX100.
    I'll say this: If you use the Magic Bullet plugins, prepare yourself for VERY LONG rendering times. Applying one of their plugins to even a small piece of footage almost quadruples rendering times. Unless you have a RAID 0 and lots of RAM or you're only doing a small piece...well, there it is.
    The piece I'm doing tonight is, in fact, going to only be about 7 minutes total when finished, and I may actually apply some Magic Bullet to this piece when it's all finished. It's a promotion for a cigar company, and I think a certain look coupled with the the DVX100 may be pretty cool. In a way, your post is actually what got me thinking about this, so thanks!
    I hope I've helped you in some way.
    Gman

  • Problems with Forms and character encoding

    I'm having problems trying to read unicode data inputted into a Form on my JSP page.
    I've used the meta tag <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> to set the charset of the page to UTF-8. I've inputted some chinese characters inot my form and when I try to read the subsequent request parameter in my servlet using request.getParameter() the string returned is this
    "&#26469;&#28304;" which is the escape sequence required by HTML to display these characters.
    From what I've read on the subject this doesn't seem like the expected value. I've tried other ways of getting the correct string value such as setting the character encoding request.setCharacterEncoding("UTF-8") and then converting the bytes using this encoding value but it doesn't seem to work.
    I could write a method to split up the string using the ; as a token and working out the correct unicode character but this doesn't seem like the right thing to do.
    Any help on how to pass the correct information from the Form in the JSP page to the servlet would be greatly appreciated

    I don't believe that is correct, but if it's returning HTML escapes instead of URL Encoded characters, then it's the browser doing it. This is my test page for playing with Chinese...
    <%@ page language="java" contentType="text/html; charset=UTF-8" %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>
    <head>
         <title></title>
         <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    </head>
    <body bgcolor="#ffffff" background="" text="#000000" link="#ff0000" vlink="#800000" alink="#ff00ff">
    <%
    request.setCharacterEncoding("UTF-8");
    String str = "\u7528\u6237\u540d";
    String name = request.getParameter("name");
    %>
    req enc: <%= request.getCharacterEncoding() %><br />
    rsp enc: <%= response.getCharacterEncoding() %><br />
    str: <%= str %><br />
    name: <%= name %><br />
    <form method="GET" action="_lang.jsp" encoding="UTF-8">
    Name: <input type="text" name="name" value="" >
    <input type="submit" name="submit" value="GET Submit" />
    </form>
    <form method="POST" action="_lang.jsp" encoding="UTF-8">
    Name: <input type="text" name="name" value="" >
    <input type="submit" name="submit" value="POST Submit" />
    </form>
    </body>
    </html>

  • Sharing Weblogic instance with Forms and ADF apps

    We have both Oracle Forms and ADF (10.1.3.4) apps that we are planning to deploy to Weblogic. We are looking for the best approach for the architecture. Our user base is small (30-50 users) and the concurrent demand will be low as well.
    Options we are considering are:
    1. Two separate Weblogic servers, one for Forms and one for ADF
    2. One WL server with 2 domains, one for Forms and one for ADF
    3. One WL server and 1 domain serving both Forms and ADF. We'd probably create the domain for Forms initially then deploy the ADF apps to it as well as the ADF runtime libraries.
    Are there any tips as to what we should consider in making our decision?

    1. Two separate Weblogic servers, one for Forms and one for ADF
    this will actually segregate the applications.. both application will work independently.. still have to consider about the memory leaks as running two separate servers will take lot of resources.. no common library files access..2. One WL server with 2 domains, one for Forms and one for ADF
    rather good approach..works well.. still each will work independently.. no common library dependencies..3. One WL server and 1 domain serving both Forms and ADF. We'd probably create the domain for Forms initially then deploy the ADF apps to it as well as the ADF runtime libraries.
    both application can refer to common libraries..

Maybe you are looking for