Anyone familiar with Magic Bullet software??
If so, I have a question. With all the new cameras that have features such as "cine-gamma" and more detailed control over color and image, is it necessary to even purchase/use something like MB anymore? I was interested in it at some point in the past, seeing as how the filters could help you achieve the elusive "film look." But, it seems these new cameras have that issue covered by processing it for a "film look" as they record, instead of you trying to fix it in post with MB.
Anyone had experience with MB and/or new cameras mentioned (Panasonic DVX100, for example)? I'd like to hear your thoughts. I'm beginning to look at new cameras; I've had my XL1 for nearly 6 years now, and although it's still a workhorse and still going, I'm liking what I'm seeing on the market.
Thanks,
Sean Kirkland
I have the Magic Bullet Movie Looks plugins. I also use a Sony HVRZ1U (which does NOT have true 24P) and tonight, as a matter of fact, I'm doing a shoot using a DVX100.
I'll say this: If you use the Magic Bullet plugins, prepare yourself for VERY LONG rendering times. Applying one of their plugins to even a small piece of footage almost quadruples rendering times. Unless you have a RAID 0 and lots of RAM or you're only doing a small piece...well, there it is.
The piece I'm doing tonight is, in fact, going to only be about 7 minutes total when finished, and I may actually apply some Magic Bullet to this piece when it's all finished. It's a promotion for a cigar company, and I think a certain look coupled with the the DVX100 may be pretty cool. In a way, your post is actually what got me thinking about this, so thanks!
I hope I've helped you in some way.
Gman
Similar Messages
-
In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.
-
After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Rendering with magic bullet instant hd advance
i'm trying to change the video resolution on my sd videos to 1080p hd.
what is the best way to do so to get the best results??
the quailty on my sd videos are good.I just wanna make them 1080p and if possiable make the quailty even bettter with magic bullet instant hd advance.You can't spin hay into gold, so have realistic expectations of what a plug-in can do.
The Red Giant website has a few before and after clips. (But keep in mind, these are best case scenarios) I have had mixed results with Instant HD. It's not a miracle Easy Button.
Here's something I've wanted to test: capture video with a Blackmagic/AJA board and an upscaling DVD player (like a PS3), using 1080i and analog component connection. PS3 has one of the best consumer hardware upscalers available. Hmmmm... maybe I'll try it this weekend. I'll post my results -
Fcpx with magic bullet green and pink flash frames
Hi I'm using fcpx with magic bullet. all recent updates. an imac 3.4ghz 32gb ram 512ssd drive and 512mb card. I keep getting pink and green flash frames whenever i colour grade in magic bullet.
first 22 secs of project were fine, next day I added to it, flash frames everywhere throughout the entire project. tried everything. is it a bug?
cheersThis problem is completely averted, for me (and reportedly most others), by exporting using "Send to Compressor" rather than using any FCPX presets. That is, no flashes or green/purple/upside-down frames show up in the final output.
I would hardly have believed that the "engine" used in Compressor is different to FCPX - but that is obviously (simplistically) the case.
This is also some confirmation that the problem is with FCPX - not the plugin. -
Anyone familiar with "The Standby Wizard for Oracle "
Is anyone familiar with "The Standby Wizard for Oracle " by Relational Database Consultants, Inc?
It is a GUI app that supposedly simplifies and automates the creation, maintenance, and switchback functions necessary to implement Oracle's standby database paradigm for high-availability.
I have a very small IT shop and simplification with data protection is important to me.
I'd like to read anyones thoughts if you have such.Hi
I never used this tool. However it is important that you have the right infrastructure, too. A standby database wrong implemented is useless. You can try to call a consult in near you to implement the dataguard.
Does Relational Database Consultants has a documentation about the product?
Bye, Aron -
Anyone familiar with TotalCode for Premiere?
Anyone familiar with TotalCode for Premiere?
http://www.rovicorp.com/products/distribution/content-production-tools/totalcode-for-adobe -premiere-pro.htm#overviewfound no reviews on the net - no user experience - no articles in magazines nothing at all...
GPU accelerated H.264 encoding sounds great if the quality is ok...
reading and creating Digital Cinema Packages (DCP) direct from the timeline also is a huge timesaver...
hmm - I'll try the demo if I find the time...
nw42 -
Anyone familiar with forms and snippets
anyone familiar with forms and snippets in IWEB?
An easier way?
Sir, anything beyond iWeb requires effort.
Find a form creator, such as wufoo, and display the form in a html snippet with an <iframe>. In the end it's the same, whether you create the form from scratch yourself or use a service :
http://wufoo.com/
My webhoster provides a formcreator :
http://one-docs.com/tools/formmailgen/
The code is very basic, so one has to dress it up a bit. See if your provider offers a similar service. -
Anyone familiar with thunderbolt bridge on a mac air?
Greetings cyber community,
anyone familiar with Thunder Bolt Bridge on the Mac Air...it seems to be set up on my computer, & I have no clue..
ThxHi sorry been off for a few days.
Not a chance you are being hacked through that unless you have a cable attached to that port.
Is your mac being hacked or your wifi connection?
Check out the security and privacy system preferences.
Is your Firewall up and running?
Check you settings he may be getting in piggy back on an app you are allowing.
Maybe you should consider using FileVault to encrypt your HD.
Hope this helps.
PJRS -
Adobe premiere pro cc 2014 freezing with magic bullet looks
Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-LokI don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html -
Render Problem with Magic Bullet Looks
Can't render effects from Magic Bullet Looks with Final Cut Pro. I receive this error message: 'The effects looks failed to render: your hardware cannot render at the requested size and depth.'
However, it renders fine with CS4.
The graphics card I have is the ATI RADEON HD 2600 XT. 256MB
All this is on the same computer.
Any suggestions?Did anyone know?
-
Red line with Magic Bullet Looks
Magic Bullet Looks in the Video Effects panel shows as a 32 GPU accelerated effect.
However, when I add it to a clip in timeline one, two or three, I go from no lines (including yellow) to a red line above that clip.
If it's a GPU accelerated effect why am I seeing a red line above the clip when I add that effect?
My card is a 285 that works fine with everthing else.Magic Bullit Looks is not a accelerated effect, so that is why you are seeing the red line.
Effects with the icon on the left are accelerated. -
After Effects CC 2014 Crashing with Magic Bullet Looks on Mac
Hi,
I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
I am running:
MacBook Pro
OS 10.9.4
Processor 2.3 GHz Intel Core i72.3 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Cuda 6.0.54
The footage is Apple Quicktime ProRes HQ
I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
I am at a loss as of how to fix or even work around this. Any help would be appreciated.
ThanksThere was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?
-
Anyone familiar with Flash Presentations?
Hi.
I continue to have problems playing movieclips on certain
slides of a Flash Presentation.
If anyone has *reasonable* experience with Flash
presentations please let me know. You might be familiar with the
problem, or have suggestions.
Thanks in advance,
Kchez Lou,
> 1. Would I be better off just placing everything on the
main
> timeline, and saving the use of mc for animations that
can play
> continously (for instance animations that "accent" the
content
> of the slide, vs those used to put the content
together)?
Well, that would certainly be one approach, but then you
lose out on the
benefit of nested movie clips, not the least of which is
avoidance of
timeline sprawl. I played a bit more with the Slide API this
morning. I
can see what's going on. Under the hood, each slide is a
movie clip, and
they all exist at once, so if you have nested animation on
any slide ...
they all start playing even on slide 1, and might in fact
have played
through by the time you hit slide 5.
> 2. Do you know of a way to have an animation stop on the
last
> frame, yet replay on slide re-entry?
Here's what I came up with. Let's assume you have two
buttons on the
root presentation slide. By default, Flash gives you a root
slide named
"presentation" and a child slide named "slide1". In my
experiment, I added
a Next and Previous button to "presentation" and wired them
up like this:
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
This uses the button event handling approach I prefer,
personally, over
on() and onClipEvent() -- I'm not sure which approach you're
using. In this
approach, the code codes into a keyframe, typically a
dedicated scripts
layer, rather than attached to the object itself. The buttons
have the
instance names btnNext and btnPrev. A function is assigned to
the
Button.onRelease event of each button instance, and the
functions call
either Slide.gotoNextSlide() or Slide.gotoPreviousSlide() as
appropriate.
In order to target the relevant Slide instance, I use the
Slide.currentSlide
property, which I reference via the expression this._parent.
Let me explain that, real quick. In the above code, the word
"this"
refers to the corresponding button instance itself -- in
btnNext's onRelease
handler, "this" refers to btnNext. btnNext -- the button
symbol -- is, by
nature, an instance of the Button class. Consulting the
Button class in the
ActionScript 2.0 Language Reference, I see that all button
instances have a
Button._parent property, which points to the object that
contains the
button. Cool. Therefore, from a button's point of view,
this._parent
refers to the timeline that contains the button. Normally,
such a reference
points to a MovieClip instance (which is what timelines are;
they're movie
clips). That's the case here, too, but thanks to the way
object-oriented
programming works, and because we're inside a Slide
presentation, the parent
movie clip of this button is also an instance of the Slide
class.
Look up "Slide class" in the Components Language Reference,
and you'll
see the full pedigree. Any instance of Slide has the
following family tree:
MovieClip > UIObject > UIComponent > View >
Loader > Screen > Slide. Slides
*are* movie clips, but they're more than that. They're also
UIObjects,
which are objects that contain all the functionality of movie
clips, and
then some. They're also UIComponents, which addes even more
functionality,
and so on ... all the way through Slide. One of the
properties of the Slide
class is Slide.currentSlide. Bingo!
So ... this._parent (in this context) refers to a Slide
instance, which
means this._parent.currentSlide refers to the currently
showing slide, which
is obviously also a Slide instance. For that reason, we can
still invoke
Slide class methods on the reference, which is why something
like
this._parent.currentSlide.gotoNextSlide() works.
Forgive me, by the way, if you already understand all of
this. Forum
replies are searchable, and who knows ... in the future, the
explanation has
the potential to help someone else, too. :)
Okay, so now the issue is, we want each current slide to run
through any
nested movie clips it may have, regardless of their instance
names, and tell
each movie clip to start again from frame 1 of its own
timeline. Amend the
above code to look like this:
import mx.screens.Slide;
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
The import statement allows us to reference Slide as a
datatype, which
happens just below the line in each event handler that was
already there.
To save a few keystrokes (basically, to make the code easier
to read), we're
creating a temporary variable, slide, and setting it to the
same
this._parent.currentSlide expression we already used. Once
gotoNextSlide()
or gotoPreviousSlide() is called, the value of
this._parent.currentSlide
changes, because now a *new* slide is the current slide. It's
the new slide
we're interested in. Using the variable slide as a kind of
shorthand, we
use a for..in loop to run through all the properties of the
current slide.
If the datatype of a given propery is a movie clip, we tell
it to go to
frame 1 of its own timeline and start playing.
What I've spelled out may or may not fit, exactly, with your
current
circumstance, but that's why I spent a bit of time explaining
the mechanics
of it. I hope that steers you in a useful direction. :)
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Photoshop cc problem with Magic Bullet Looks 2 !
I am having trouble with using Red Giants' Magic Bullet photolooks 2 plugin with PS CS6 (32&64).
The standalone program works fine on its own but fails to launch properly from PS's filter menu. It tries to launch the app but then reports an error Sorry, an error occurred (12288), Corrupted memory profile, then an error Can't open dest profile. These errors can't be cleared except by going into task manager to kill the app. Photoshop reports the error as LooksBuilder failed to launch. Please ensure the application has not been renamed or moved from the install location and then Could not complete the Photolooks command because of a problem with the filter module interface.
Please Help
i heard that the fix is by the color management , but i dont know howDisable those plugins until you can get an update from the plugin manufacturer. Just change the name of the folder they're in to start with ~ and relaunch Photoshop.
Also, the magic bullet looks have nothing to do with color management.
Maybe you are looking for
-
ATP Check on the basis of Acknowledged PO
Hi Friends, I have a requirement where My client want the ATP check should be done on the basis of followings; 1. Saftey Stocks. 2. Acknowledged Purchase Order 3. Lead Time. Safety Stock and Lead time is in SAP standard. My problem is Acknowledged Pu
-
Username availability in post-login application processes
Hi there, I have a problem with a post-login application procedure that sets session variables. Some of the variables are based on the username of the user that is logging in. I'm using the function htmldb_custom_auth.get_username to return the usern
-
Is splitting a cell now gone???
Such a basic function. There appears to be absolutely no way to split a cell in the new iWork.
-
How to take input in one frame and display it in other frame of same page?
I need to take input (text) for the comment field in one of the frames and when submit button is pressed it should be displayed in the other frame on the same page. I am able to get the input from the user but its not reflected in the other frame whi
-
Video turns grey when I try to record it using Quicktime
I am trying to save chapters of a DVD as movie files so I can share them online (this is a DVD of home movies essentially, so there shouldn't be any copying issues). I have been trying to save the videos using Quicktime's screen recording features, b