Anyone familiar with Ship Confirm (P4205) Program- where changes were made
Interested in finding someone who would know in detail pros and cons when making changes particularly to this program trying to alter when inventory is released and when the actual ship date is updated.
This has come up due to a 2 year change that included an additiona status to ensure that Invoicing could not be done until product had left our site. However now we are posed with a different challenge as data show ship confirmed possibly two or three days before truck leave site which means Invoicing is held up that many days as well based on our new changes which pose a potential problem with Revenue eing reported ina different period. (Could see this at monthend). We have reports in place to ensure that things are in check, but audtitor keep bringing the issue up. so I am wondering if anyone has had a simliar issue.
I am haveing no luck getting my program to work... so
if anyone could look at it and make it happen that
would be great..... If you do change any think I would
like you to comment it so I know where the changes
were made.Two things that may help you:
1 - Post your code using the special tokens - it makes reading easier.
2 - Explain, in details, what is wrong with your program, don't make us copy, compile and run it.
Rafael
Similar Messages
-
After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.
-
Anyone familiar with "The Standby Wizard for Oracle "
Is anyone familiar with "The Standby Wizard for Oracle " by Relational Database Consultants, Inc?
It is a GUI app that supposedly simplifies and automates the creation, maintenance, and switchback functions necessary to implement Oracle's standby database paradigm for high-availability.
I have a very small IT shop and simplification with data protection is important to me.
I'd like to read anyones thoughts if you have such.Hi
I never used this tool. However it is important that you have the right infrastructure, too. A standby database wrong implemented is useless. You can try to call a consult in near you to implement the dataguard.
Does Relational Database Consultants has a documentation about the product?
Bye, Aron -
Anyone familiar with TotalCode for Premiere?
Anyone familiar with TotalCode for Premiere?
http://www.rovicorp.com/products/distribution/content-production-tools/totalcode-for-adobe -premiere-pro.htm#overviewfound no reviews on the net - no user experience - no articles in magazines nothing at all...
GPU accelerated H.264 encoding sounds great if the quality is ok...
reading and creating Digital Cinema Packages (DCP) direct from the timeline also is a huge timesaver...
hmm - I'll try the demo if I find the time...
nw42 -
Anyone familiar with forms and snippets
anyone familiar with forms and snippets in IWEB?
An easier way?
Sir, anything beyond iWeb requires effort.
Find a form creator, such as wufoo, and display the form in a html snippet with an <iframe>. In the end it's the same, whether you create the form from scratch yourself or use a service :
http://wufoo.com/
My webhoster provides a formcreator :
http://one-docs.com/tools/formmailgen/
The code is very basic, so one has to dress it up a bit. See if your provider offers a similar service. -
Anyone familiar with thunderbolt bridge on a mac air?
Greetings cyber community,
anyone familiar with Thunder Bolt Bridge on the Mac Air...it seems to be set up on my computer, & I have no clue..
ThxHi sorry been off for a few days.
Not a chance you are being hacked through that unless you have a cable attached to that port.
Is your mac being hacked or your wifi connection?
Check out the security and privacy system preferences.
Is your Firewall up and running?
Check you settings he may be getting in piggy back on an app you are allowing.
Maybe you should consider using FileVault to encrypt your HD.
Hope this helps.
PJRS -
1) I am having trouble with an excel file wanting to save when no changes were made. As soon as you open the file and exit. It prompts for a save.
All excel versions are 15.0.4701.1002.
Using a table.
the functions CELL, OFFSET, TODAY, INDIRECT, NOW, INFO and RAND are not being used.
2) Same file. 2nd person is being told they are opening the file as read only - but when they are quitting excel prompts them to save the file.
Everything was working fine. I started having problems with Excel, IT wiped my version out and re-installed office.
File is on networked server HP - Windows Server 2012 Essentials.
We are all on Windows 8.1 Pro.
I really hope someone can help - the excel expert had no answer - and passed me along to here.I copied the whole file and started deleting worksheets one at a time and testing it by closing it and re-opening it then closing it again – to see if it wanted to save.
Once all the pivot tables were deleted – the problem went away.
I found that some of the pivot tables had automatic refresh upon open, so this caused the excel to think data had changed.
It is fixed now. By clicking on one cell of the pivot table, analyze, options, data and uncheck the 3<sup>rd</sup> square down to not automatically refresh. NOT A NETWORK ISSUE. -
Anyone familiar with Flash Presentations?
Hi.
I continue to have problems playing movieclips on certain
slides of a Flash Presentation.
If anyone has *reasonable* experience with Flash
presentations please let me know. You might be familiar with the
problem, or have suggestions.
Thanks in advance,
Kchez Lou,
> 1. Would I be better off just placing everything on the
main
> timeline, and saving the use of mc for animations that
can play
> continously (for instance animations that "accent" the
content
> of the slide, vs those used to put the content
together)?
Well, that would certainly be one approach, but then you
lose out on the
benefit of nested movie clips, not the least of which is
avoidance of
timeline sprawl. I played a bit more with the Slide API this
morning. I
can see what's going on. Under the hood, each slide is a
movie clip, and
they all exist at once, so if you have nested animation on
any slide ...
they all start playing even on slide 1, and might in fact
have played
through by the time you hit slide 5.
> 2. Do you know of a way to have an animation stop on the
last
> frame, yet replay on slide re-entry?
Here's what I came up with. Let's assume you have two
buttons on the
root presentation slide. By default, Flash gives you a root
slide named
"presentation" and a child slide named "slide1". In my
experiment, I added
a Next and Previous button to "presentation" and wired them
up like this:
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
This uses the button event handling approach I prefer,
personally, over
on() and onClipEvent() -- I'm not sure which approach you're
using. In this
approach, the code codes into a keyframe, typically a
dedicated scripts
layer, rather than attached to the object itself. The buttons
have the
instance names btnNext and btnPrev. A function is assigned to
the
Button.onRelease event of each button instance, and the
functions call
either Slide.gotoNextSlide() or Slide.gotoPreviousSlide() as
appropriate.
In order to target the relevant Slide instance, I use the
Slide.currentSlide
property, which I reference via the expression this._parent.
Let me explain that, real quick. In the above code, the word
"this"
refers to the corresponding button instance itself -- in
btnNext's onRelease
handler, "this" refers to btnNext. btnNext -- the button
symbol -- is, by
nature, an instance of the Button class. Consulting the
Button class in the
ActionScript 2.0 Language Reference, I see that all button
instances have a
Button._parent property, which points to the object that
contains the
button. Cool. Therefore, from a button's point of view,
this._parent
refers to the timeline that contains the button. Normally,
such a reference
points to a MovieClip instance (which is what timelines are;
they're movie
clips). That's the case here, too, but thanks to the way
object-oriented
programming works, and because we're inside a Slide
presentation, the parent
movie clip of this button is also an instance of the Slide
class.
Look up "Slide class" in the Components Language Reference,
and you'll
see the full pedigree. Any instance of Slide has the
following family tree:
MovieClip > UIObject > UIComponent > View >
Loader > Screen > Slide. Slides
*are* movie clips, but they're more than that. They're also
UIObjects,
which are objects that contain all the functionality of movie
clips, and
then some. They're also UIComponents, which addes even more
functionality,
and so on ... all the way through Slide. One of the
properties of the Slide
class is Slide.currentSlide. Bingo!
So ... this._parent (in this context) refers to a Slide
instance, which
means this._parent.currentSlide refers to the currently
showing slide, which
is obviously also a Slide instance. For that reason, we can
still invoke
Slide class methods on the reference, which is why something
like
this._parent.currentSlide.gotoNextSlide() works.
Forgive me, by the way, if you already understand all of
this. Forum
replies are searchable, and who knows ... in the future, the
explanation has
the potential to help someone else, too. :)
Okay, so now the issue is, we want each current slide to run
through any
nested movie clips it may have, regardless of their instance
names, and tell
each movie clip to start again from frame 1 of its own
timeline. Amend the
above code to look like this:
import mx.screens.Slide;
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
The import statement allows us to reference Slide as a
datatype, which
happens just below the line in each event handler that was
already there.
To save a few keystrokes (basically, to make the code easier
to read), we're
creating a temporary variable, slide, and setting it to the
same
this._parent.currentSlide expression we already used. Once
gotoNextSlide()
or gotoPreviousSlide() is called, the value of
this._parent.currentSlide
changes, because now a *new* slide is the current slide. It's
the new slide
we're interested in. Using the variable slide as a kind of
shorthand, we
use a for..in loop to run through all the properties of the
current slide.
If the datatype of a given propery is a movie clip, we tell
it to go to
frame 1 of its own timeline and start playing.
What I've spelled out may or may not fit, exactly, with your
current
circumstance, but that's why I spent a bit of time explaining
the mechanics
of it. I hope that steers you in a useful direction. :)
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
IStore problem with Ship/Confirm
Hello,
We are running Oracle iStore on Oracle Application Server with Oracle DB 9i.
We have a problem when we try to Ship/Confirm at item that was purchased on our website.
We open the Oracle E-Business Suite window and select Ship Confirm in the Query Manager and enter our:
From Order Number: 7777
To Order Number: 7777
When the record is round it is properly filled in and shows up on the Lines/LPNs tab.
The trouble starts when I click on the "Delivery" tab. We should see the same record at the top of this window but instead it is blank. An attempt to do a Ship/Confirm at this moment gives the error message:
APP-WSH-228467: You cannot perform an action on a new record.
I'm not an Oracle pro and have so far been unable to find anything about this error message. If anyone has any comments or suggestions it would be great.
Sincerely,
JerryYou can use Javascript to confirm a delete, and delete an object in the following manner.
//link to delete an object..
<a href="thisPage.jsp?delete=<%= itemID %>"
onClick="return confirm('Are you sure you wish to delete this item?');">delete</a>Then, at the top of the JSP pageif(request.getParameter("delete") != null)
//do whatever to delete, then load the page as normal
}Now, your item will be deleted, and the page will be refreshed to show the changes. -
Hi,
I have created a Sales Order in Oracle Apps R12, booked the sales order and also done the pick release and ship confirm and status of sales order in shipping transaction form is "Staged/Pick Confirm".
Now I am trying to do the ship confirm, I have entered the shipped quantity, Actions -> Ship Confirm and clicking on OK. Getting the warning pop up message and after clicking on OK button, Requests submitted Bill of Lading, Packing Slip Report and Commercial Invoice. but still the status of line in shipping transactions form is "Staged/Pick Confirm".
Could you please tell me how can we do it ship confirmed.
Thanks in Advance.
Manasa.The items on the order are reservable or non reservable? IF non reservable did you mention the Sub inv, locator and lot during ship confirm ?
Also check how the ship options when you are ship confirming (by rule or ship options). To know what each flag indicates look for warehouse shipping execution guide. -
Does anyone familiar with 'Container number'?
Hi,
Is container number a key or field in SAP??
what is the relation between container number with delivery document and ASN????
Thank you very much.Dear Hoo Laa
You can maintain this container number in some blank fields available in delivery document.
While planning export shipments, the exports marketing will be coordinating with shipping agent and get advance informaions like container number, feeder vessel, tentative departure of feeder vessel from origin port etc., These informations can be stored in unused fields if need be, for statistical purpose.
thanks
G. Lakshmipathi -
Need help with an SHDB BDC program for Change outbound delivery(VL02N).
I have created recording to change outbound delivery(VL02N). Steps are as below-
For VL02N recording 1st I have click on the header(F8) then dates tab.
Then insert line (+ button) then it shows 8 transport types.
I have chosen 7th transport type. In SHDB it shows BDC_CURSOR = '08/07'.
Then I have created BDC program for this recording, but it's not working,
because It is changing BDC_CURSOR value every time when we do SHDB or VL02N and in my code I have hard coded BDC_CURSOR = '08/07' .
Can anyone tell me how to get this BDC_CURSOR changed value. So that instead of hard coding this value I can select this value every time.
(FYI For this Screen name = SAPMSSY0 Screen No = 0120.)
Thanks.I have created recording to change outbound delivery(VL02N). Steps are as below-
For VL02N recording 1st I have click on the header(F8) then dates tab.
Then insert line (+ button) then it shows 8 transport types.
I have chosen 7th transport type. In SHDB it shows BDC_CURSOR = '08/07'.
Then I have created BDC program for this recording, but it's not working,
because It is changing BDC_CURSOR value every time when we do SHDB or VL02N and in my code I have hard coded BDC_CURSOR = '08/07' .
Can anyone tell me how to get this BDC_CURSOR changed value. So that instead of hard coding this value I can select this value every time.
(FYI For this Screen name = SAPMSSY0 Screen No = 0120.)
Thanks. -
Issue with recorded sound- sounds like the recordings were made underwater.
Hi, all.
I'm running Adobe Audition CS5.5 on a Toshiba Satellite Pro C660-1UZ with Windows 7 Home Premium installed. My machine meets all of the system requirements, as far as I can tell, and yet recordings made in Adobe Audition sound like they were made underwater.
For reference:
http://www.soundclick.com/player/single_player.cfm?q=hi&songID=11138745
I'm not using an interface at present, but would be willing if there were a cheap model available.
Thanks for any help,
CaseyI have a slightly older Toshiba Satellite notebook that I use for recording and mixing and I can tell you that the built in audio interface (i.e. the mni jack mic input) is worse than bad. I can get away with it for Skype phone calls but that's about it--and even for Skype I often plug in my interface.
The other thing going on with the sample you posted is that the levels are very low so the need to crank things up to hear anything just accentuates the noise.
Basically, Audition just takes the signal provided by your mic and interface and doesn't affect the sound in any way until you deliberately add processing. You really do need to invest in an interface--pretty well any two track USB devices will be a vast improvement on the Toshiba mic input. -
Anyone familiar with ARPREC?
Hi,
We are trying to write a C++ program as part of a science project. We were getting calculation errors and were told they were due to round-off and had to include a high-precision library. The ARPREC library was recommended to us which we downloaded from:
http://crd.lbl.gov/~dhbailey/mpdist/
We followed the installation instructions in the INSTALL file:
1) ./configure
2) make
3) make install
The README file in the package included a simple C++ program:
#include <iostream>
#include <arprec/mp_real.h>
int main() {
mp::mp_init(300);
mp_real a, b("0.1");
a = sqrt(b);
std::cout << " sqrt(0.1) = " << a << std::endl;
mp::mp_finalize();
return 0;
}We assume the code is correct since it was included in the ARPREC package, but compiling gives the following error messages:
line 2: Error: Could not open include file<arprec/mp_real.h>.
line 13: Error: mp is not defined.
line 13: Error: The function "mp_init" must have a prototype.
line 14: Error: mp_real is not defined.
line 14: Error: Cannot use const char* to initialize int.
line 16: Error: Overloading ambiguity between "std::sqrt(double)" and "std::sqrt(float)".Our knowledge of C++ goes as far as our ability to program our formulas but we don't know much about the broader things (like installing and linking libraries) and we've never seen these types of errors before. We were thinking that maybe we didn't install the library correctly, or if there are other things we're supposed to do beyond the installation steps above, or we are not compiling our program properly. We're new to Solaris and so for now still compile from the command line using the command:
CC -o our_program our_program.cpp
Does anyone have any experience with ARPREC that can help us get the above program to work?
Thank you!The compiler is telling you it failed to find the file arprec/mp_real.h, which means that the compiler didn't know where to look for it.
Using angle brackets instead of quotes around the file name in the #include directive might be the problem. Angle brackets are supposed to be used only for system headers, like iostream or math.h. With angle brackets, the compiler looks in special directories for the file, but usually not in the current directory. (The code as written might work by accident with some compilers, but will not work with all compilers.)
Try adding the option -I . (dash I space dot) to the command-line options for the CC command in the makefile(s). You should see a makefile macro called something like CCOPTS or CCCOPTS with a list of options that get passed to the C++ compiler. Try adding "-I ." to that macro.
If that still doesn't work, gcc and Sun C++ have an additional option -I- (dash I dash) that tells the compiler to treat additional -I directives as system directories. Try -I- -I . and see if that works.
A web search turned up several references to ARPREC, and you didn't say where you got yours. Try contacting the author about this problem, or a community forum for ARPREC if there is one.
Taking a larger view, you might be barking up the wrong tree. Ordinary type double, having about 15 significant digits, is often enough for many scientific calculations. Or you can use type long double, with about 33 significant digits. The round-off and other calculation errors might be due to the way you write the calculation, or to using an unstable algorithm.
Simple example: Suppose you compute 1e40+1-1e40. The mathematical answer is 1, but that is not the computational answer if you perform the calculations in that order. Using computer arithmetic, 1e40+1 is exactly 1e40, because you don't have 40 significant digits. If you reorder to 1e40-1e40+1 you get 1 as an answer. Another common error is comparing floating-point numbers for equality instead of allowing for small variations. Yet another, a component in an unstable algorithm, is dividing by the result of subtracting very large numbers.
You might need to split a formula into separate steps to ensure the correct computational order. That is, instead of writing
x = A - B + C;
you might have to force the order by writing
t = A - B;
x = t + C;
I would look to something like ARPREC only if you are sure you don't have basic numerical computation errors.
Maybe you are looking for
-
No essbase connection in SmartView 11.1.2.5
Hello, Server EPM 11.1.2.3, compact deployment : After uninstalling SmartView 11.1.2.3 and installing SmartView 11.1.2.5 : Connection OK to Hyperion Planning & Reporting and Analysis Framework, Connection KO to Essbase : No Essbase provider in Shared
-
Crystal Reports XI Dates appearing in US format instead of UK Settings
Hi, When I am running reports from my java Web Application using crystal reports XI, the dates are being displayed as mm/dd/yyyy even though the regional settings are set to dd/mm/yyyy and the date format of the reports is set to use System Default
-
Error after arabic language installation
hi i installed EBS on redhat linux EL4 machines the configuration is : two nodes: node1(db,concurrent,administartion) node2(forms, web) shared appl_top is enabled the instance is VISION i run manintan multi langaul tables from adadmin before runing t
-
Add Logo in HR Forms for payslip
Hi Experts, I need to inculde logo in HR froms, my consultant suggested that copy the satandart HR form and create a Z-form. i dont have that much idea on HR Forms, is it possible to include the logo in HR Forms? Based upon the input given by the use
-
How to make a SQL database connection with a java code in netbeans?
can somebody helpthrough an example