Anyone figure out how to edit the genre list in itunes yet?

I've searched the topic list to answer my question and have found some threads on this subject but all were from some time back.
I was just wondering if there is anything new on this. I understand there are factory preset genres. I understand how to add and remove my own. But I want to nuke apple's factory preset genres so my list is more concise and pertinent to my own tastes.
Another reason I want to edit it could just be because they say I cant!

I am not sure if this is what you want, if you click on the genre field of an individual track, you can edit it. If you make it a new genre, it will appear in the genre list.

Similar Messages

  • Can anyone help me sync calendars from my iPhone to my Mac and help me figure out how to edit or delete lists in Reminders?

    Can anyone help me sync calendars from my iPhone to my Mac and help me figure out how to edit or delete lists in Reminders?  I thought upgrading to Mountain Lion would work, but I'm having the same problem as before under Snow Leopard.  So, here's my situation. 
    I'm running 10.8.2 on a Macbook Pro.  I have a 3GS iPhone running 6.0.1.  I can make entries on my Mac Calendar and they will show up on my iPhone, but if I make an entry on my iPhone, it never makes it to my Mac.  Also, I notice that when I log in to my iCloud account on my Mac, it has a "me.com" email address as my apple i.d., but it is not my primary account i.d. and I can't figure out how to delete it.  Also, my Reminders application won't allow me to delete lists I created.  Contacts, on the other hand, work instantaneously regardless of where the change is initiated.

    On you iPhone check Settings>Mail,Contacts,Calendars>Default Calendar (in the calendars section).  Here be sure you have selected the Calendar listed under your iCloud account ID as your default.  If you haven't, make this change, then enter a new event on your phone and see if it syncs properly now.
    You should be able to delete you reminders list by, from the Lists view, tapping Edit at the top, then tapping next to the list you want to delete and tapping Delete.

  • Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

    Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

    In YAMAHA01v96i:
    Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
    Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
    Save again the scene overwriting the old one.
    in LOGIC
    Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
    That's more or less it.
    It worked for me...so far

  • Anyone figure out how to solve the 1015 error

    anyone figure out how to solve the 1015 error

    Each version of Photoshop has its own installation path therefore a different application as fars as Wacom Configuration.  You would need to set preferences for each Photoshop installed on your system.  However if you know XML.  Wacom Tablet Preference File Utility can save your Wacom preferences into an XML file.  That you may be able to duplicate a Photoshop install and the change the Photoshop Path. Or just change the prion version pathe the the new Photoshop path then restore your Wacom Preferences using the modified XML preference file.
    Here you see part of my wacom preferences I have set preferences for all Photoshop installed on my workstation.

  • How do you edit the genre list in iTunes

    My genre list has become very random and I want to reduce it to the general Blues Jazz Rock Pop Classical, can anyone help?

    iTunes has a set list of genres programmed into it.  Other genres are added and deleted as you edit the genre fields of files.
    Discussion of general cleanup of genres - https://discussions.apple.com/thread/3037638
    This is an older set of directions for editing the genres included in iTunes. I don't know if it still works with newer versions, and make sure you back up your computer before doing editing of this kind because unpredictable things can happen.
    Editing iTunes application to remove default genres - http://hints.macworld.com/article.php?story=2007020311224154 - added tips: "the 'Genres' section is near the bottom of the 'Localisation string'" & "Right click iTunes and click show package contents"

  • HT4059 How do you actually search for free books - a few are listed, but not many and I know there are thousands more, but can't figure out how to see the complete list or at least a genre list.  Thanks!

    How to access the list and genre of the free ebooks, also the paid ones.  I have a few, but I know there are thousands of others to choose from, but don't know how to access them.  Thanks!

    I'm another one of the very grumpy customers regarding the problems synching Outlook calendars with the new 2.0 iPhone.
    I have another twist: I did not ever have multiple calendars in Outlook until the 2.0 update; I had just one. After I updated the iPhone software to 2.0 I have multiple calendars which I did not create. My iPhone has all the events listed, color coded by these various calendars, but when I look at my calendar(s) in Outlook, I can not see all the events at once. So my iPhone is the most complete, and my computer version is fragmented. This is an unacceptable royal pain. I'm relieved to know it's not just me, my iPhone, my Outlook, etc., but I'm definitely one of the many of us who are grumpy with Apple and impatient for their fix.
    My question is: how do I sync my Outlook to my iPhone and delete all these calendars without deleting events? I just want one calendar again: mine, all mine.
    PS I do have recurring events, but way too many to hand change them all; that's ridiculous. Even if I didn't have many of those it's ridiculous that the recurrences should create these problems. It's a pretty basic electronic calendar function.

  • Anyone Figure Out How To Edit Using Canon .mxf Files?

    my Canon xf105 .mxf files won't import into Adobe Premier Pro 6.0.3...  Keep getting a "generic error".... and I've tried everything!
    I've downloaded the Canon utilitiy, tried merging the clips, tried isolating the .mxf files, tried not touching the clip structure at all.....
    PLEASE HELP!!
    I'm using a Mac OS 10.8.2 on Mountain Lion.

    Put the CONTENTS folder in its own folder and name it e.g. Card 1.
    Go to the Media Browser and click on Card 1.
    Now your clips will show up and you can import them.
    Or go to the Project Window and click on Card 1 and Import Folder.
    If you want single files.
    Open XF Utility and Set Virtual Media (File) for Card 1.
    Select all files and Export to MXF (Edit).
    These single files can be imported into the Project Window.

  • Has anyone figured out how to limit the number of emails displayed in the mail app?

    There used to be a setting in Mail, Calendar, Contacts that would let you set the number, starting with 50 emails.  I can't find this setting in iOS 7.

    I do not know why one cannot use an artboard
    in Illustrator it looks like this
    In Photoshop it looks like this
    As far as I can determine it has cropped the area properly as before, please explain what is missing?

  • Has anyone figured out how to stop the 1022 from killing the spooler?

    It used to be that when I'd print a PPT the spooler would crash and then none of my devices/printers worked.  I never happened when the 1022 was unplugged.
    Now, the 1022 kills the spooler as soon as I install it.    I've see a number of discussions but no solution yet.  I could really use some help.
    Thanks.

    Not yet....
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Anyone figure out how to fix the dialer lag?

    Nothing like dialing a number and having to wait 30 seconds to 5 minutes just to actually make the call.  What if there's an emergency???  I have deleted the cache (pressing power and home at the same time), force stopped the dialer......nothing works more than a few hours.  :-(

    I have had this problem.  It's even worse when you have to dial 911 and have to wait 1 minute for it to start dialing.
    A hard reset worked for about a day.  With no apps on the phone, it started lagging.
    From the updates that the phone had:
      .596 lagged a little for me
       .602 did not lag and seemed to be the best
       .605 lags all the time and seemed to break more stuff
    I believe those are the right update numbers.
    My solution is an upgrade soon because I still have 5.3gb of space free on the phone. So, caching would not be an issue I would think.

  • I want to be able to select only the pages I want to print ei. 2-5 vs 1-8 but I can';t figure out how to edit the final #

    I want to economize on ink so I want to be able to select, for printing,only those pages that are important to me.. For example instead of printing pages 1 thru 8 , I may want to eliminate pictures and/or comments at the end of an article. I can adjust the beginning # but not the final one. Any help would be appreciated.

    Bonjour has nothing to do with this.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup to get rid of that garbage which removed all built-in secuirty included with iOS on your iPhone.
    If your iPhone is not recognized by iTunes, check this link.
    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1591?viewlocale=en_US

  • Anyone figure out how to make a Flash w/transparent bkgnd yet?

    It's been a while since I tried my hand at developing Flash animations that I could drop into a Keynote presentation. My big disappointment when I tried a year or so ago was that you couldn't export the animation in such a way as to play in Keynote with a transparent background. Best you could do as far as transparency went was some sort of HTML export and only in the Windows version. Or some such madness.
    Anyway, it would be great to be able to create animations (as slick as Flash can make them) that would play in KYN.
    Anyone have a nice solution (maybe even non-Flash)?
    PowerBook (15" Al PBG4)   Mac OS X (10.4.5)  

    Anyone know if Flash Pro 8 has improved the transparent background issue? We used to be able to put a man on the moon. So much computing power later we can't have simple animations with transparent backgrounds?
    I hope I'm not the only one who wants to be able to generate a Flash-style animation with a transparent background that I could drop into a Keynote presentation.
    My hat's off to Kyn for finding a way (there was a will)!
    I'm hoping for a simpler solution. Maybe there's just no demand for this feature, or it's hugely difficult to code.
    In the meantime, I'll keep trying to pound Keynote's animation set into something I can use.

  • Anyone figure out how to get Powershot G2 to work again after update to 1.5

    All my raw files from my Powershot G2 are now "Unsupported" since the update. Has anyone figured out how to update the program to allow support for that camera again? Any help would be much appreciated! Thanks

    You can get the old hack for the Canon Powershot G2 RAW support to work again on 10.4.8 and Aperture 1.5, and you do NOT need to revert back to the old 10.4.7 IO Frameworks file. The solution is to download the new 2006-01 RAW Camera Support update from Apple's web site. Here is the link version for PPC machines (which is what I have):
    http://www.apple.com/support/downloads/digitalcamerarawsupportupdateppc.html
    There his also a Universal version on Apples site (but I have not tried this version):
    http://www.apple.com/support/downloads/digitalcamerarawsupportupdateuniversal.ht ml
    After you install this update, it will place a new copy of the RAW.plist file in the usual place:
    /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fram ework/Versions/Current/Resources/Raw.plist
    Edit this file with the old hack, making sure to add the "<!-- 10.4.0 -->" to the 1st line and save it back. A few notes on this:
    1) I'm not sure whether the "<!-- 10.4.0 -->" is needed, but similar items appear in all other cameras now, so no harm in adding it.
    2) To place the editted version back in the library, I had to 1st move the old RAW.plist file to the trash, then copied the editted version to the library. I then restarted to allow me to delete the version in the trash (otherwise the system thinks it is still in use).
    3) To be safe, I also did a repair permisssions (which did repair the permissions of the new RAW.plist file).
    After this, I was able to open Powershot G2 RAW files in Aperture and PReview (have not tried iPhoto, but is shoudl also work there).
    Here is the hacked code for the Canon G2 camera.
    <key>Canon-PowerShot G2</key> <!-- 10.4.0 -->
    <dict>
    <key>blackReplace</key> <true/>
    <key>black</key> <integer>32</integer>
    <key>max</key> <integer>1023</integer>
    <key>white</key> <integer>1023</integer>
    <key>premul0</key> <real>1.90</real> <key>premul1</key> <real>1.00</real> <key>premul2</key> <real>1.22</real>
    <key>m1</key>
    <array>
    <real>1.0507</real> <real>-0.4281</real> <real>-0.0161</real>
    <real>-0.5540</real> <real>1.2938</real> <real>0.2909</real>
    <real>-0.1205</real> <real>0.1844</real> <real>0.8335</real>
    </array>
    <key>m2</key>
    <array>
    <real>0.9087</real> <real>-0.2693</real> <real>-0.1049</real>
    <real>-0.6715</real> <real>1.4382</real> <real>0.2537</real>
    <real>-0.2291</real> <real>0.2819</real> <real>0.7790</real>
    </array>
    <key>mc</key> <real>0.83355</real>
    <key>otrc</key>
    <array>
    <real>0.450</real> <real>0.090</real> <real>1.467</real> <real>0.260</real> <real>1.842</real> <real>0.652</real> <real>1.040</real> <real>0.538</real>
    </array>
    </dict>

  • I cannot figure out how to change the photo size on my iPhone 5s.  I was given the choice of small, medium or large the first time I took a picture.  Now I have no idea how to change it to medium.  Can anyone help?

    I cannot figure out how to change the photo size on my iPhone 5s.  The first time I took a pic it asked if I wanted smalll,  medium or large and listed the pixels.  I chose small but am now finding that is too small.  Can anyone help me set it to medium now?  I can't find any setting for that.  I'm a newby to iPhones and have no idea what I'm doing.  Thanks for any help you can offer.

    By "sending" do you mean sending email?
    If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
    My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
    I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
    To my  knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

  • HT2602 I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?

    I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?

    ebony --
    So, when you open your main Applications folder, there is no Office app there?
    It's in your Users>Applications folder?

Maybe you are looking for

  • How to search special characters in a string

    Hi all, I want to search special characters in all string columns and all rows in the table. The table has about 5 string columns and about 5.000.000 rows. For each row and column, I have to search entries, which included special characters like ", !

  • Photo sync: Is there a limit?

    I've been trying to sync photos from a folder on my Windows computer for about two hours now. I've updated both the iPad and the iTunes to their latest version. I have 339 photos in this album, and only about 50-100 of them sync. I can't get all 339.

  • I think my computer might have a virus, how do I get rid of it?

    Hey my name is keenan and i have a macbook and my internet seems to be running slow all of a sudden. Please help!

  • Synchronize two VO attributes. Best practices.

    Hello, everyone. I wonder what is the best solution for the following problem. I my VO I have an attribute with name "Attr1" of type VARCHAR2. Also I have a field of type DATE on a page. I need bind the filed and Attr1. By this I mean that the value

  • Dev team says cat components unusable!!

    I'm a designer. Me and my team have been trying to use catalyst along with our developer who use builder. The dev team is saying that any component from catalyst is 10-20 times the size of a builder comp, and so they are practically unusable. They ma