Anyone find this board K7N2 Delta-ILSR

Ok i have been looking for a new motherboard and i found the K7N2 Delta-ILSR motherboard. I liked the specs and tried to find the board out there on the internet. Unless everyone that has this board mismarked it or I am completely missing it. I am not able to find this board on the market. I am curious if anyone has come across a site that sells them or if they have been taken off the market. Or depending on how new they are, are they not yet out? But I didn’t find any release dates either. Any help would be great.
Thanks.
?(

Dose MSI have a board or place where they announce when they are going to be releasing new products. I was under the assumption that it was released because it was put out on their site, under products. ?(

Similar Messages

Hyper-X and K7N2 Delta-ILSR Ultra 400?

hey i was gonna ask if anyone is running an K7N2 Delta-ILSR Ultra 400 with some kingston pc-3700 ram? i want to get some pc 3700 ...my 1st choice was corsir but price of the corsair pc-3700 is a bit higher then the hyper-x

Kingston PC3200 will work very well with this board as I have tested it and I shall got on Monday my new 2x256 PC3200 kingston CL2.5 and I will be very happy . So You can use it but I am not sure about Hyper-X performance GreetZ

Problem with K7N2 Delta-ILSR, please help

First off, these are the specs for the computer to which I shall be referring in this post:
K7N2 Delta-ILSR
AMD 2700+
1x512MB PC3200 Memory Corsair CM64SD512
Seagate Barracuda 80GB 7200RPM SATA ST380013AS
ATI 9600 Pro
400 Watt power supply
Cendyne 52x cd burner
Here's what happened. I installed everything with only minor difficulties, mostly due to getting the hard drive to work. They were worked through with little problem due, in large part, to this forum. I installed Windows XP, and we ran a number of things with no problem after the OS installation. The drivers for the video card loaded well. 3DMark2003 ran beautifully. After I got that working, I went to put my friend's old hard drive in as a slave, so he could get the files off of it. This seemed to work well enough. Then we went to load the drivers for the motherboard. When it got to the audio driver, we got the old "blue screen". Then the computer reset and tried booting 98 from the old hard drive. We shut down and disconnected the old hard drive. Then we restarted to find that after the second screen XP would not begin to boot. After some playing around we decided it best to reinstall, because with no combination could we get the OS to boot up. So we reinstalled, with a full format. This time, the first thing I went for was the motherboard drivers. It stopped at the audio driver, again, and gave us the old "blue screen", again. This time, instead of stopping the boot after the second screen, it came up with this message
Windows could not start because the following file is missing or corrupt:
\system32\hal.dll.
Please re-install a copy of the above file.
Any suggestions would be greatly appreciated before we decide what to do next. Please let me know if any more information is required. None of the bios settings have been altered, save to boot from the CD.
Thank you,
M.Cordier

i would test ram
http://www.memtest86.com
and go to drive makers site and get their testing utility
other possibility is a crap psu like them qtecs

Dont find any connection for PFC on K7N2 Delta ILSR

Hi !
Just bought a MSI Motherboard K7N2 Delta ILSR
Looking for the connector pin for my PFC ( Power fan Control)
I can only find two fanconnectors on the board
CPU and System
SORRY if this question has been asked before
searched the Forum but did not find anything

I just installed this same board. I only found 2 also, so I suppose that is all there is. If you are trying to set the system up so you can monitor the power supply temps and fan, here is what I did.
The chipset fan is a 12V fan, so unplug it from the motherboard and power it by using an adapter so you can run it off one of the Molex leads. I do not know if they make these because I fabricated the wiring myself. You will not be able to monitor the chipset temps though.
To fab the connector, I just used the wiring from an old system fan and soldered two small pins (about one-quarter of an inch long), covered each lead with heat shrink and plugged them in via a standard Molex connector. Make sure that you do not leave any of the pin exposed, ie: (the heat shrink should push up to the plastic of the chipset fan connector).. I finished it by covering the new connector with heat shrink to make sure it didnot come apart.
Now you can use the northbridge fan control for the pfc. This has worked good for me, and was $30 cheaper than a fan controller unit

Anyone help - need I/O plate for K7N2 Delta ILSR??

I'm based in the UK but will pay P&P worldwide........
cheers
D.

Good luck!
http://search.stores.ebay.com/ws/search/StoreItemSearch?catref=C5&fcl=3&from=R7&frpp=50&fsoo=1&fsop=1&sacat=-1&satitle=k7n2+delta+ilsr&sbrexp=WD1S&sif=1&sofindtype=0&sofp=4&ssPageName=WD1S
Edit: If applicable:
http://www.mycableshop.com/sku/ATXBACKPLATE.htm

HELP me with my K7N2 delta ilsr

Can anyone help me with this problem. I have just upgraded to MSI's K7N2 delta ilsr motherboard. Its all working quite well apart from the fact that the pc wont start up from cold....at all.
When I start the pc from an off state, it runs up the fans and drives, but does not post.
The diagnostic led pannel on the back of the pc shows that the cpu is faulty or not installed correctly.
If I then press the reset button, the pc posts, and boots up just fine.
It does this EVERY time I start up.
I have tried re installing the cpu, which is an XP 2800+ 333 barton, but to no avail.
I have asked a few questions on other forums, but I cant solve it.
These are the suggestions so far.
1. the psu (I have a Tsunami 400 atx psu) could not be giving out enough power on initial startup, but once the pc is running, it has enough to boot the pc from a reset.
2. The mobo or the bios could be at fault. I have not flashed the bios, or upgraded it in any way from original, so is there an issue with the original bios on these boards, and 2800 barton chips??? Could it be a mobo fault? The pc runs fine once the machine is booted.? how do I test it?
3. The cpu could be faulty? but would this not stop it running fuull stop?
4. my ram. I have a single stick of OCZ 512mb pc3200 ddr, which I was told would make the pc fly. Not shure on that statement, but is this ram compatible?? could this be the problem?
Im fairly new to the upgrade side of things, and I need some help with this one.
Also, Id be really greatfull if some one could talk me through flashing my bios to the latest version, as the thought of doing this narks me a bit...I dont want to mess it up and get a dead pc...
HELP

+3.3v 14A
+5v 28A
+12v 16A
+5vsb 2A
-5v 0.5A
-12v 0.8A
Hope this helps, as my pc seems to be living with its case off a lot these days..haha

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

PNY and MSI K7N2 Delta - ILSR

Looking into buying the K7N2 Delta-ILSR...I have heard that it is a awesome overclocker, and a very fast board. Has anyone had experience with using...
PNY Optima PC2700 DDR memory on it? It is double sided memory, with Hynix chips. Hynix chips are listed on MSI's Memory Compatibility PDF...but i wanted to know if anyone has used it before? Thanks

Its not tehre, but it does use Hynix chips, which IS supported. I also have read in this forum that people have got my exact memory to work flawlessly on the board i want. Thanks anyway!

MSI K7N2 Delta ILSR - RAID BIOS Option ???

hi ho,
i have my 2 storage devices pluged into the promise 376 onboard controller. they are not connected as a real raid (not mirror nor real stripe). my OS is win2k on the first sata device and everything was fine for a long time.
but now when my system boots, it detects the ide drives and then i see the irq board.
right after that the system stops and tells me 'disk boot failure'. so i don`t get the chance to configure my raidcontroller or my sata devices.
it is as the controller is deactivated. i remember a bios version where you could activate and deactivate the sata controller. but in my bios (right now it is v7.8) there is no such option.
i have tested so far:
- reset cmos
- flash bios v7.5 to 7.8
- disconnected sata drives
anyone with similar problems or any suggestion?
> MoBo : K7N2 Delta-ILSR Bios v7.8
> CPU : AMD Barton 2500+ (not overclocked)
> Ram : TwinMos 1GB 3200 400Mhz
> Sata : 2 x Maxtor 120GB Sata (as single Devices on Raid-Controller)
> Ide : 60GB IBM DeckStar
> Gra : ATI 9600 pro 128MB
> Aud : SB Audigy 2 ZS
> Pow : SilverPower 350W, +3,3V/+5V@25A and 12V@18A
> OS : win 2000 SP4 + Security Updates 31.07.04 + DirectX 9.0c

watch the bottom of the screen after pressing Enter on the "Welcome to Setup" screen. There will be some moments of files being loaded, and then you should see a message appear which says "Press F6 if you need to install a 3rd party SCSI or RAID driver". This message will only stay on the screen for a couple of seconds, so press F6 as soon as you see it appear. After this is done, you will see other messages appear, and it will act as though nothing is happening, but eventually a screen will appear which will allow you to install the drivers for the sata controller.
specify a device press S, select "win 2000 promise fasttrak 376 controller" it will read floppy and load, dot not remove floppy yet, continue win2000 install it may nead to access floppy to finish installing raid driver, did you do it like this.
try making some floppy boot disks and boot to floppy instead of cd.
http://freepctech.com/pc/002/files010.shtml
when you say there not listed, where did you see this? they wont be listed, windows will search for fasttrak controller so it will see sata's conected to it with out you knowing, so long as you load the controller from floppy that came with mobo as above.

K7N2 Delta ILSR Strange network problems

K7N2 Delta ILSR
2500+ AMD Barton
Radeon 9600 PRO
Windows XP
Hi there,
My network was working fine yesterday but now whenever I plug a cable into the onboard network card, my computer starts having these strange flucuations...Every few seconds the CPU usage jumps from 0% to about 50% which causes the system to freeze for a second, making it a real pain to do anything.
Does anyone have any idea whats causing this?
Thanks,
Shim

Quote
Originally posted by deftonie
The kingston memory I have is on the memory compatibility list.
kingston removed k7n2 from their supported list.
kingston is not on the Good Memory Choices for ALL K7N2 nF2 released boards
for some reason msi have not removed kingston from their supported list.
Quote
Originally posted by pseudemys
So (and I'm addressing the question in particular to Raven): shoud i wait for a some kinda accident, crash, whatever sooner or later? I'm really scared about such things. You know... everything seems ok and then, suddenly, a nasty surprise. Which is the problem with kingston and k7n2 series? Further, I'd like to buy another 512 M stick and honestly it seems more sensible to me to mount two equal sticks. And I feel somewhat stuck...
a memory can be incompatible but still work.
alot of people buy any memory they can and throw in and it may work.
but it can start crashing after installing some program or updating bios or drivers.
thats the reason i posted the memtest program.
worry about a crash....no reason for that as you self said memtest reported no errors prime95 no errors and doom3 worked good.
kingston uses many different chips on their memory and its those chips that is the problem.
one guy found out that on the specific memory he bought kingston used 3 different chips on.
only 1 of them worked good on k7n2.
so a 33% chans of success in getting a good module is considered bad.
so write down the numbers on the chips and take it with you to the store and compare it to the memories they got.

K7N2 Delta ILSR memory problem

I have a K7N2 Delta ILSR board with Athlon XP 2500 with 2 Gig of Mushkin Black Line ram (the ones that are
suppose to be CL2). I change the FSB to 200, and my memory won't run at CL2. Want to raise the Dram voltage
to 2.8V to see if it would make a difference. I looked all over this site for the modded bios 7.8. Does anyone
have the modded bios??? Any help would be appreciated.......

He/She overclocked the 2500+, to make it become a 3200+. Done it myself, but it mostly works with the first step of the 2500+. - That means the overclock forum.
Well, CAS 2 is a very tight timing, which I don't think is possible. In general on Socket A systems:
- FSB 133/266 --> CAS 2 or 2.5
- FSB 166/333 --> CAS 2.5
- FSB 200/400 --> CAS 3

K7N2 Delta ILSR won't boot from FDD or HD

I have a serious problem with my new K7N2 delta ILSR based computer.
My machine is
K7N2 delta ILSR 400W
3.3/25 5/32 12/15 V/A PSU
512+256 MB A-data 3200 ram
Athlon XP2500+
BTC 48x24x48 Combo
100 mb Zip int. -disabled
120 GB Seagate barracuda SATA-disabled
120 GB Seagate Barracuda parallel
Triplex parasouls ATI 9600PRO 128MB
The machine POST's normally with all 4 lights doing what they should.
The Promise BIOS can detect the SATA drive correctly but when an attempt is made to write the array an error- 'error modifying array- system is going to reboot- press any key to reboot>" is given.
The M/B BIOS detects the FDD and Seagate Parallel drives correctly but when a correctly formatted XP boot disc (or Mandrake Linux or Caldera DR-DOS) is placed in the floppy drive a "no system disk" error is given.
When you F6 to install RAID drivers in the Windows XP install and the screen comes up where you are prompted to insert the floppy there is no mass storage device detected.
I purchased a new FDD and it gives precisely the same error as the original.
I installed the parallel Seagate in another system and installed and activated windows XP on it. After re-installing it in the K7N2 system I was disappointed to discover that it will not boot off the hard drive. When you boot from the XP CD the machine locks up. (Disconnecting the HD it will boot normally)
This is a real puzzle as it is possible to format the hard drive using Max Blast3- the maxtor disk utility which is based ( as is the Seagate Seatools utility) on Caldera DR-DOS). And I can't see why it should boot from a CD-ROM and not from any other correctly formatted boot disk.
I suspect a problem in either the (South?) bridge that controls the peripherals or the BIOS. I am at a loss how to re-flash the BIOS with out the use of the floppy drive- unless this can be done from a CD-ROM.
The PSU is not being strained and nForce list both RAM sticks as OK.

Quote
Originally posted by Wonkanoby
is the fd light on all the time,as that means the ide type lead needs flipping 180 degrees in the back of it
is the hard drive ide 80 wire ,blue end in the board
any thing shorting under the board,an extra stand off or the like
The Fd light behaves normally. i.e. lights up when the drive is being accessed.
has anybody else noted that the FDD is B by default- That the cables have a few wires twisted like the wires between the first and second plugs on the old cables?
The IDE 80 wire(counted!) is long end in the board- my plugs are all 3 black. You can't put them in the wrong way becaue of the centre key.
All the stands are plastic except for two brass ones that are in the centre of the board that go to circular mount pads. That is how the case came and I thought it was a design feature.
The thing I find most puzzleing is that i can boot a caldera based system that finds everything including the floppy- and read it- (provided you call it drive B!) yet naything DOS based won't go- I have this feeling that it has a screwed up DOS call that is not looking in the right disk sector for NTldr or whatever to boot. I think this is a bios problem- but I am not sure how to find out when you can't boot from the FDD.
My brother has talked to some tech friends and there word is that this is a weird one- probably a dud board RTS.

K7N2 Delta -ILSR going up in smoke

I just rebuilt a system using my K7N2 Delta - ILSR that I had just taken out of my old case (got new board to replace it) for a friend of mine. Everything was working fine for 2 days and then all of a sudden the computer shut off and about 5 seconds later it turned back on and then I started to smell something starting to cook. I quickly pulled the power but the damage was all ready done. The FSB chip was cooked (the one that has the green sticker that says FSB400). It had melted a hole thru the middle of the sticker about a 1/2 inch across. The board is only a year old and I was wondering if anyone else has heard of or had this happen to them. All bios settings were normal. Meaning nothing was overclocked.

Quote
when i come to think of it i heard of it once before.
someone left his computer on when he was out of country for 3 months.
when he come back he could se the north bridge had melted.
Thats scary. My Computer never gets turned off unless i am going to do some kind of maintenance. I think i built it in April and basically it has been on ever since. ( presume the warranty will cover for this kind of eventuality. My Bios is set for stock speeds and voltages. The room that the computer is in does have a working and regularly checked smoke alarm though,

2 Queries on K7N2 Delta-ILSR

Hi,
1) I just bought a pair of K7N2 Delta-ILSR mobo's for two new pc's. Each box has in it an item that isn't mentioned in the book, on the box, or at the website. It's for a rear slot, and it has two ports on it. One looks like an RCA jack, the other is five hole round (looks similar to a mouse port). There's a black cable with a rectangular five hole connector on the end.
Anyone know ehat it is?
2) I feel stupid even asking this. There's an nforce2 chip on the board, which I'm told is equivalent to a geforce 3 card. Where does a monitor get plugged in to?
Thanks!!!!
Paul

I believe its a TV out that was included by mistake, there is an answer in a FAQ I read tonight on the MSI site. There is no GeForce on the K7N2 Delta-ILSR, you need the "G" version for that.
As I just got my Delta tonight I will ask a couple of questions here Im unsure about instead of making a new thread up.
First Im using my XP2400 266mhz until I can afford a new CPU but Im using some 333mhz Ram, will this be ok and whats the best settings will I have to run the ram at 266 or can I run it at 333mhz? BTW I have used the 333 in my 420 ok with the xp2400 but with this Delta accepting a higher memory type Im unsure how it will pick it up in any settings.
Also I notice an extra 4pin CPU ATX power connecter, do I have to use this as well as the normal ATX connector?
Finally, is the covered Bluetooth port just a bog standard USB connecter?
thanks for any answers
waveydavey
#

NEED HELP - K7N2 Delta ILSR

I really need help. I recently bought my new moboard the K7N2 Delta ILSR and with it a GeForce FX 5600 256DDR, 512 DDD Ram PC3200, an 80Gb Seagate SATA HD, andi have a 2800+ AMD Athlon Xp Barton Core Cpu. The problem i get is that when i try to install Windows XP it says it cant find any hard drives. I saw the other thread that was like this but that one had about RAID so i thought i would ask again. I even tried it with Windows 98 which finds my hard drive and even installed once but after that i tried to upgrade to Windows Xp which didnt work, overwrited some of my Windows 98 files and so that didnt work either and when i try to install it again it gives me errors. PLS help im desperate to get my lan workin with my other PC. I havent changed any options in the bios and i dont know if i have to change anything to make sata work. I dont have a floppy disk either for the hd. I found it in the array thigy as well.

Windows will not find a SATA drive you have to tell it you have one bios will only find IDE drives.
you must hit ctrl F when the screen comes up during boot and creat an array just follow the on screen promps.
If you bought a OEM board and don't have the SATA Promise disk download it from MSI and a Manual too.
Either a Raid 0 or Raid 1.
It looks like you have only one drive so just tell it that and the array will work.
Than go to your Bois and set Bois to boot from CD first SCSI secound.
Now you can load your OS. When your OS starts to load it will flash a line across bottom of screen asking if you have SCSI hit F6 do so. The OS will keep loading but when its done it will ask for you 3.5 promise disk. Put it in and load the Fast Track 376 program.
When you OS is finished loading it will again ask for this disk as the first time it just loads the drivers to memory the secound time to your HDD.
Good Luck it a little confussing the first time as the programers think there talking to techs not people so use terms that sometimes don't make sense.

Anyone find this board K7N2 Delta-ILSR

Similar Messages

Maybe you are looking for