Anyone gentoo linux ? I seek for a good use flags set

I install funtoo (gentoo with the stage file from here) stage 1 on my box
The system is my notebook - a thinkpad core duo
Im teenager in the sense of things I need from it - to be fast and lightweight (at very least as fast as arch default minimalistic install), compatible with everything, capable of p2ping wireless when I skateboard with it, have all needed stuff inside but not be bloated (boot / response time), and be as cool as linux can be
I prefer KDE 3.5 desktop. No gnome. Some *boxes but i dont need full functionality in them.
I dont accept any proprietary stuff on the computer. I may accept a binary firmware file to be uploaded to a device (with a ) but strict 'no' to blobs etc
Things that are patented but implemented entirely in open source (like linux mp3 support) are considered free (there are no sw patents where I live)
Plz paste them here from make.conf
CFLAGS etc will be accepted and thanked too

Korey Kaczynski wrote:
What's the point? Some proprietary programs are pretty good, such as Skype, Opera, Cedega, and others. Open source is a good model for software development, but it's not the end-all-be-all of computing.
Also, what about computer games? Those are proprietary, usually for good reason
I use open source cause i like it. To me heaving a 'clean' computer is kinda proof of concept that I can live my way and not depend on stuff I dont like
Some closed software I simply dont trust. This includes skype and some wireless drivers
If a friend of mine wants to talk with me via skipe I tell him to install any SIP client from the list in wikipedia
I have an intel ipw3945 wireless card in the laptop. I just did not install it. Now when there is at last a driver without blobs (except an image that is blindly uploaded into the card) I accept this
I really dont play any computer games. I didnt play them (except some old dos games) when I used windows either

Similar Messages

TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

Is anyone experiencing High loading times for iCal events using Outlook exchange

I am using an iPad2 and use the default iCal and another calendar app (HD Informant) connected Exchange and synched to Outlook. Recently it is taking over 45 seconds to a minute to load calendar events. When I go to swipe to a new week, it freezes' or at least takes another 45 seconds to move day to day, week to week or month to month.
Is anyone experiencing similar issues?

categories are not supported at present. If you add a contact to your phone and sync, you will need to categorize in outlook.

How to get unit cost for finished goods in prod order

HI all,
IN a production order of type PP04, there is cost analysis you can get from CO03. This shows the cost for finished goods and BOM components. Would anyone know how the cost for finished goods are calculated ? The issue i have is that the unit cost of the finished goods is not correct. It is higher than what it should be. I looked at the moving avg price at material master but the cost used in calculation is different than in material master. Can anyone shed light how finished goods are calculated and why it is picking up a higher unit cost ? Where is the higher cost coming from for finished goods material as shown in CO03 ? The BOM materials are picking unit cost correctly. Would this have anything to do with cost settlement ?
thank you.
joyce

Hi,
Finished goods price will depend on BOM componenet price, activity price and overhead price. Check whether this prices are picking correctly or not.
Regards,
Sreekanth

I have office 2004 on my Imac. Cannot open .xlsx files. Anyone know of a patch for this

I have office 2004 on my Imac. Cannot open .xlsx files. Anyone know of a patch for this

Mac users using Word 2004 who receive a Word 2008 for Mac, (or Word 2007 for Windows) document, will not be albe to read this without having the Open XML Converter installed, which can be downloaded from Microsoft.
Go to this page:
http://www.microsoft.com/mac/downloads.mspx
and click on the right under Most Popular, 'Open XML File Format Converter for Mac 1.0.2'
This opens a window at the bottom of the page. Scroll that to the bottom and click on English.dmg, and it will download for you as a disk image, which can be installed in the usual way.
After installation you can open and read .xml formatted Word 2008 documents in Word 2004.
Update: This link http://support.microsoft.com/kb/976831 takes you to a newer version 1.1.3 (released Nov 10, 2009).

Discontinuity and Follow-up Materials for Finish Goods

Dear all,
We have used for a long time the Discontinuity functionality and Follow-up Materials for Raw and Packaging materials (components in BOMs).
We would like to use the same functionalities for Finish Goods, but after setting fields in MRP4 View, it seems not to work as it did for components.
Is it possible to reproduce the same effect in Finish Goods as we had with components, i.e., use some kind of Discontinuity and Follow-up materials for Finish Goods?
We currently work with R/3 V.4.7.
Thank you all in advance for any support.
Best Regards,
Alberto

Dear Alberto,
If my understanding is correct then this discontinued material concept works only for the components and not for the finished
product during MRP.
Discontinuation Data Use
In MRP, the discontinuation functionality is used to transfer dependent requirements of a component to one or several follow-up
materials, if the requirements are no longer covered by stock. You can also define a follow-up material in the bill of material.
Check this link to explore more.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/b1/c044d1439a11d189410000e829fbbd/frameset.htm
Regards
Mangalraj.S

Im looking for a good note app with pen for taking notes ( in english and german )during business trips. Can anyone help

I'm looking for a good note app with pen function for taking notes ( in English and German ) during business trips. Can anyone help?

Really sorry to hear about this, particularly when you're putting your life on the line. But Apple cannot track your iPhone in any way unless you had set up Find My iPhone prior to it being lifted.
It's possible that AT&T might be able to do something, but it's probably that they cannot track it, or will not without a request from an authorized law enforcement agency, but rather would only disable the device. You'll have to try and find a way to contact AT&T directly and ask if they can do anything to help you; the chances of any AT&T employee in a position to help you spotting this thread it pretty small.
Good luck, stay safe, and come home soon.
Regards.

Good Use for TiBook G4 667Mhz

Hello all!
Aside from the systems listed in my profile below, I still have my first Pro class laptop (15in. Ti Book G4 667, 768mb RAM, 30gb HDD) and was using it daily up until about 2005. It's currently loaded with OSX 10.4 or 10.3.
Though it hasn't been used or even powered on in a few years I don't want to get rid of it. Other than a fairly dead battery, it's in great shape, no scratches or wear marks and the top bezel around the KB was replaced by Apple right before I got my Core 2 Duo MBP (I was amazed Apple did that 5 years later- they were concerned about the sharp enamel chips that were flaking off). I'm really compulsive about keeping my gadgets in good shape
I was considering turning it into a music/photo server and or bringing it back up to the kitchen to use as a house PC (movie, weather look ups, light internet info, etc.). So what I'm asking is if there are any suggestions on a good way to set it up so they there is minimal overhead/taxation on the system. What to turn off, good lightweight programs to use or if there is such thing as a lighter stripped down of OSX or if anyone has experience putting Linux on an older Mac. I have very little experience Linux other than pre-built releases like Jolicloud and know nothing about custom setups.
Any tips are appreciated. Thanks!

You could turn it into a media server, I had an old Pentium III 700mhz Laptop that I used as a home/web server and it worked fine for basic tasks. If you install iTunes 9, home sharing should make it very easy.
You probably shouldn't have to disable any services on a clean OS X installation. That being said, there is a tool that can do that: http://sourceforge.net/projects/lingon/files/
Linux on your Mac is tricky, since it's a PPC machine. You'll have to find a distribution that supports. Probably the most popular and compatible is Yellow Dog Linux.
http://www.yellowdoglinux.com/support/downloads/ (make sure you download an iso with 'ppc' in it's name).

Gentoo Linux and Microsoft Failover Clusters / Hyper-V

Hello,
Hoping there are a few people on the boards familiar with running Gentoo Linux guests under Microsoft FailOver Cluster / Hyper-V hosts.
I have four Gentoo Linux guest VMs (running kernel 3.12.21-r1) running under the Microsoft Failover Cluster system with Hyper-V as the host. All of the Hyper-V drivers are built into the kernel (including the utilities and balloon drivers) and generally they
run without issue.
For several months now, however, I have been having strange issues with them. Essentially they stop responding to network requests after random intervals. However, these intervals aren't a few minutes or hours from each other; more like days or even weeks before
one of them will stop responding on the network side.
The funny thing is that the VMs themselves on the console side still responds. However, if I issue a reboot command on the externally non-responsive VM, the system will eventually get to a stage where all of the services are stopped and then hangs right after
the "mounting remaining system ro" line (or something like that).
The Failover Cluster Manager then reports that the system is "Stopping" but the system never reboots.
I have to completely restart the HOST system so that either (A) the VM in question transfers to another host and starts responding again or (B) when the HOST comes back up I can work with the VM again.
This *ONLY* happens on the Gentoo Linux guest VMs and not my Windows VMs.
Wondering if anyone has hints on this.
Thank you for your time.
Regards, Christopher K.

Hi ckoeber,
Hyper-V has support most of Linux distribution but not all because it’s have so many distribution, until now the Gentoo Linux not in the support list, you can refer the following
KB to know more about the detail:
Linux Virtual Machines on Hyper-V
http://technet.microsoft.com/en-US/library/dn531030
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CLAD Certified LabVIEW developer with 6 months exp seeking for Job in LabVIEW/Embedded

Hi,
I am currently working at CC Engineers Pvt. Ltd. as a software developer in LabVIEW and seeking for a job change. Please find the skillset, project  and certification information below.
Academics:
B.E. Electronics with 70.90% on degree.
Objective: To make use of the knowledge acquired by interest, skill and education for the personal growth of the organization in development of various applications in LabVIEW. Summary of Skills:
● Good knowledge of NI LabVIEW with CLAD certification● Good knowledge of C programming● Basic knowledge of SQL, PL/SQL, RDBMS concepts● Basic knowledge of Linux, Macintosh OS● Good knowledge of Windows 98/XP/Vista● Good knowledge of Computers, Hardware, Latest Technologies Certifications:
● Certified LabVIEW Associate Developer (CLAD), National Instruments. ● NI LabVIEW from YCCE college, Nagpur. ● Oracle9i from Concourse, Nagpur. ● Programming excellence through C from Kanetkar’s Institute of Computing &      Information Technology(KICIT) Pvt. Ltd, Nagpur. Work Experience:
Currently working at CC Engineers Pvt. Ltd, Pune as a software developer in LabVIEW from past 6 months.     Projects Undertaken :
● Railway Braking System Fault Trainer using NI LabVIEW 8.5:Company: C.C. Engineers Pvt. Ltd.Description:An invaluable aid in the effective understanding and troubleshooting of the faults associated with Railway Coach Air Braking System. The fault trainer has a teacher panel that can be kept out of student control. The teacher can create faults using this panel. The student panel has an array of buttons necessary to monitor various system parameters respectively. The student then has to follow laid down fault finding procedure and locate the fault. ● DIESEL ENGINE TRAINER using NI LabVIEW 8.5:    Company: C. C. Engineers Pvt. Ltd.     Description:     Diesel Engine Trainer is process of testing faulty Loco. The main goal of our        project was to simulate faults occurring in Diesel engine for railway trainees.      Software was divided into two parts Teacher and Student. Teacher selects      fault and student finds out particular cause of fault. Student finds fault using      Symptom, Input Description and remedial action. Input Description is      accessed from hardware having 32 buttons using RS232 communication. Two       Monitors divided by NVIDIA Graphics card were used. ●   Simulated Data Acquisition and Device control using NI LabVIEW 7.1:Description: Input was taken as temperature through a thermocouple from DAQ device. The LabVIEW code would accept this input and record its average value along with the values of voltage and current, over given time in a text file. If the temperature exceeded a fixed threshold value, the DAQ would send an output signal through one of its configured ports which would control a bulb through a relay. This LabVIEW Code could also be controlled remotely through internet, or on a Local Area Network. If my skillset match any open positions, please mail me to [email protected]
Thanks a lot!
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"

Dearest Friend,I AM most interested in this position. PLEASE forward, to, me the (MAIL ID) ID for which I send the RUSME for this position and attacha lll conntact detailes available at this time. We are requiiring you prom,t and cisrterous replies to this topic . Many Greatful Thanks to you and all,Sajib Nowdhury

Looking for a good method or APP to have client sign a form in a text box

I am looking for a good method or App to take an existing form/Document and have a client sign, date etc. I will want to create the text boxes in a stationary location. Possibly to also take a picture to add to form.
Has anyone used any apps to accomplish this?
Apps I have tried.
Signnow
Sign PDF
Sign Easy
Sign Easy is about the best except the signatures (text boxes, dates, etc) are free floating and confuse people where to add them on form each time. Clients have no clue how to use it.
Any suggestions would be helpful. I may be over complicating this also, as there could just be a PDF app that I utilize.
Thanks,
Jim

Maybe more than you need...
PDF readers
PDF Expert – the PDF handling app for the iPad. "It allows you to markup documents with highlights and handwriting, insert text and stamps, sign and even merge PDFs."
https://itunes.apple.com/us/app/pdf-expert-5-fill-forms-annotate/id743974925?mt= 8
iAnnotate – turns your tablet into a world-class productivity tool for reading, marking up, and sharing PDFs, Word documents, PowerPoint files, and images. Has a secure document edition designed for corporations.
http://www.branchfire.com/iannotate/

Looking for a good tutorial or book for 3D composite

Hi, I do editing for 3D animation at work (simple kind) and working along with 2 other 3D modelers.
We recently came down to the conclusion that we need to composite to be able to render our animation.
However, none of us really know how to do 3D composite, including myself.
(I mean we know the simple composite using alpha channels and such... but not to the point to using z-depth or shadow maps... etc..).
I was looking around online and book store to find out if there is any good resources for us to learn. I do not have much luck of it, unfortunately.
I'd like to have our 3D modlers to know how to split to all different layers for a clean composite purpose.... (like for me to use in Shake ). From what I found out, higher end composite, you can split most of the gemoetries its own object IDs, and shadow map/layers, lighting layers... (even they render separetely, it do cast shadow as other objects surrounds it, or refection..) and then composite in one scene.
I believe we create pretty good animation when we rendered them all together in one scene, and now we are up to the point that there are too many geometeries and render farm computers can't handle to render (and they are not lower end compters but they crash when we try to render with not enough memories).
I'm not really looking for having real footage as background and 3D infront .. that kind of composite...
If there is anyone can direct me to a right book? or online website to learn more of this stuff for all of us, I'll be really appriciate it.
Thank you for your time...

These might get you started as well:
http://www.computerarts.co.uk/tutorials/3d_and__animation/boulderdash
http://www.3drender.com/light/compositing/index.html
http://www.3drender.com/jbirn/ea/Ant.html
http://www.ethereal3d.com/Tutorials/Compositing/Compositing.html

Looking for a good spam-proof guestbook!

Hello.
Anyone know of a good guest book component that uses flash
and/or cold fusion. The only good ones I can find are with php. :(
I don't want to use php.
I bought a decent one last year from cfmagic but the evil
spam people destroyed my guest book with ugly posts.
I will pay money for a good one. It does not have to be free.
Thanks.
Pedro

CF and PHP should "mix" fine since they're different. Many
hosts offer CF
and PHP and even ASP(x) so as long as your server has PHP
installed there
should be no problem. I guess if your host doesn't offer PHP
there's not
much you can do. You just said you didn't want to use PHP,
not that you
couldn't use it. In that case, I'm not sure... but good luck.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Looking for a good guestbook!

Hello.
Anyone know of a good guest book component that uses flash
and/or cold fusion. The only good ones I can find are with php. :(
I don't want to use php.
I bought a decent one last year from cfmagic but the evil
spam people destroyed my guest book with ugly posts.
I will pay money for a good one. It does not have to be free.
Thanks.
Pedro

couldn't you make modifications to the one you have now?
adding CAPTCHA or using something like Jake Munson's cfformprotect
project?
lylaCAPTCHA -
http://lyla.maestropublishing.com/
cfformprotect -
http://cfformprotect.riaforge.org/

One good use for a PC

Found one good use for my vaio laptop.
I had a problem that went like this:
Adventures in Sony Mini DVD land....
Original Message ( Posted Oct 11, 05 7:49 am )
OK...
I've read & digested all the good advice 'round here regarding getting DVD into FCE.
SCENE 1, Act 1:
Customer gives me Sony Mini DVD's recorded on an NTSC cam, and wants an edit deleiverd in DVD NTSC. I live in a PAL country. And I own a cheap camera that doesn't appear to have any kind of NTSC playback or recording option. I use this to digitize. So recording the analogue output of my DVD player is out.
Paid my money and got DVDxDV..
YAY! working well EXCEPT!!!......
SCENE 2: ...these DVD's are dual sided. the contents of side 1 show up as what I assume are chapters. These I converted to NTSC for Final Cut and everything is rosy. However the final chapter thingy seems to be an fast forward silent montage of the contents of side 2 of the disc.
The other side of the disc placed upwards in the DVD tray gives me no joy in either DVDxDV or in Macs DVD player. The superdrive won't touch it.. Both sides play on my domestic player.
Anyone got any experience/advice/ideas/condolences to share?
Tearing my hair out, and if you've seen my picture (think Yoda but pink) you'll understand why that can't be a good thing...
Pete
Then..
UPDATE:
the superfast forward montage thing is stills captured to the disc.
I used disc utulity to make a new disc image (.cdr) which has a ts_video folder and a DCIM folder which has stills in it.
No idea of whether or not I'm getting anything from side two in amongst all those chaptery thingos I converted.
Now I have a Video TS folder I might try opening THAT with DVDxDV.....
+ + + + +
Well no joy with side 2 till I had this flash...
Sony Laptop, sony proprietary stupid format. Maybe if I...
Then bingo! The vaio recognized the files, I copied them to a cdr, and i carried the disc over to my uncooperative mac.
So the whole thing is laid out here for anyone who ever gets lumped with this kid of edit job.
BTW Google was totally useless on this topic (where the dual sided version of these dumb sony 8cm DVD's was concerned)
So, as it turns out, this info could be worth somethin'...to someone...

Thanks for the feedback Master Y.
PCs do come in handy. I use one every day for various duties.
I still love my Mac, even thoug hit's done quite a few laps.
Al

Anyone gentoo linux ? I seek for a good use flags set

Similar Messages

Maybe you are looking for