Anyone get Advanced Actions to work after HTML5 conversion?

Using the HTML5 converter strips out all the Advanced Actions right? - also the Timer widget does not display because no animations allowed? Anyone got Advanced Actions to work in HTML5?
Many thanks guys.

Please, read the release notes for the converter, you'll see that nor widgets, nor advanced actions will be converted.
Lilybiri

Similar Messages

Display selection of user variables later on in project - can't get advanced action to work

Hi all,
I'm working on a sales training with Captivate 5, based on PPT. I want to do the following, but can't figure out how to design the advanced actions to do it:
The learner is asked to choose 1 of 3 products he wants to work with (ok, that's easy).
For that product he's asked to provide 10 features in TEBs (so far so good, 10 user variables created for each feature).
As a next step, he needs to choose the top 3 features with which he wants to work further. The chosen 3 display a check mark when the respective clickbox is clicked, when he chooses the 3rd, a 'done' button & a caption 'click here...' appear. Advanced actions working ok, see below what they look like. If there's an easier way to do that, please let me know - took me hours to get this to work!
One issue I face is, that I don't know how I could allow the user to change his choice, i.e. 'un-check'. Currently, checked is checked - no way for the learner to change his mind.
But even more importantly:
I need to display the content of the 3 checked/selected variables at a later stage in the project. So, say the learner choses feature 2, 3 & 6 as the most important by checking the respective clickboxes behind the displayed variables (v_neo_f1 to f10) - how do I need to change my advanced action, so that I can generate variables v_neo_chosen1 - 3?
As you see in the screenshots above, I've tried to do that by creating an additional variable for each of the 10 features and assigning the value 1 when it's checked. That way I could check later in the project, which of those variables has the value 1 - but I don't know how to link this variable (v_neo_f1_check) then to the variable for the feature in which the text I need to display is stored (v_neo_f1).
This got me a major headache & hours of frustration already - can any of the guru's help me out here?
If anybody is interesting in creating the necessary actions for me at a reasonable rate, please let me know. I'm bordering desperation.
Happy new year,
Anja

I'm not sure I fully followed exactly what you are trying to do, but essentially what I got from your post is that its pretty complicated and you want to create new variables on the fly.
For that sort of thing I would suggest that advanced actions may not be advanced enough for what you are trying to achieve and that you should go for a Flash Widget instead.
For anybody getting started on widgets, I throughourly recommend the Widget Factory by the Widget King, which can be found at:
http://www.infosemantics.com.au/widgetking/
I also strongly recommend the following video:
http://www.adobe.com/cfusion/event/index.cfm?event=register_no_session&id=1719643&loc=en_u s
Alternatively, as Lilybiri suggests, there may already exist a widget that does what you want it to do.

Advanced actions not working in project preview or publish

I have a project with advanced actions which work fine in single slide preview but which don't work at all in project preview or when I publish. To make it even worse a slide on the same project I did earlier works ok when previewed. Very confused! Any suggestions? I have used the force publish option and all the timelines look the same as the successful slide as far as I can see so I have no idea.

Hi Lilybiri,
sorry for the delay in replying, I've been tied up elsewhere. I'm using CP7. My advanced action is simply meant to show one image after another on click of a button. It works perfectly for the first instance and then doesn't for the next two. The only difference between the slides is that the latter two have the images stacked on top of each other whereas the first slide has the images placed separately on the slide. This is the advanced action for the first slide:
The decisions just refer to the images. And this is the timeline:
Compared to one of the slides that doesn't work (no images appear)
where again the decisions are just referrring to showing images, and the timeline for this slide:
As I said they both look the same to me apart from the layering of images on the second slide. Any help much appreciated!

How can I get my printer to work after a Yosemite update?

How can I get my printer to work after a Yosemite update?

Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W.

I can't get my iMessage to work after changing Apple ID passsword

How can I get my iMessage to work after changing my apple password?

Well did you change the apple id in imessage?
settings - message - add your new id and delete the old id.
Or turn off imessage and then back on to reactivate with your new id.

Having trouble getting iTune Extras to work after the movie in iTunes 64

Having trouble getting iTune Extras to work after the movie in iTunes 64

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading it?...

For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading Flash 9 ?... for the link at
http://www.universalhub.com/node/24494
"To watch this video you need Flash 9
You have an old version of Flash. Fortunately we can upgrade
your computer to Flash 9 without without any hassle. Just click on the
upgrade button - you don't even need to leave the page!
[ Upgrade now! ]
After Flash 9 is downloaded, you'll need to restart your browser.
[ Download and install manually. ]"

Hello Again Don,
It appears you have been struggling with this issue since November of 2008.
Have you considered upgrading to a newer version of OS X instead?
11/20/08 What workarounds are there for OS X 10.3.9 users on websites with flash
4/12/09 How do you get the current Flash to work with OS X 10.3.9 ?...
5/25/09 After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
8/9/09 How can OS X 10.3.9 users view Flash on websites?...
8/9/09 How do you get Flash 9 to work with OS X 10.3.9 ?...
ali b

How do you remove Playback Controls on iPad after HTML5 conversion?

If you turn off the Playback Control in the Skin Editor in CP5.5, it vanishes from the SWF correctly, but still appears on the iPad after HTML5 conversion. Any way to remove it from iPad?

Have a look at this blog post, scroll down and you'll find the way to hide the playbar:
http://blogs.adobe.com/captivate/2012/01/rapid-elearning-with-adobe-captivate-5-5-html5-wa y.html#more-3743
Lilybiri

Actions and Advanced Actions not working correctly. - Captivate 8

In our project, we have it set so that after every section the student is asked three quiz questions (they are set on the default quiz slides.) On success, the person jumps to the next question slide. On failure, the person goes to next slide which has two buttons - one that allows them to simply move forward to the next quiz question and one that allows them to go back and review. The "Go back and Review" button takes the person back to the specific content slide that contains the answer to the question they are being asked. This button is set to advanced actions "Jump to Slide ..." and "Show Button..." - The button is a 'Return to Quiz' button to allows the person to find the answer then try the question again. I know that the buttons on the default quiz slides cannot be programmed to do a specific action, but every time we click 'Submit' it seems fine until we click 'Next' to move ahead, it then routes us back to one of the content slides (Slide 7) instead of the next slide (if wrong), or the next question slide (if right). I have looked at the Advanced Interactions Window and there is nothing linking this slide to anything. I have not had this problem with any of our other modules or sections. I have tried creating new question slides and it did not work. I deleted Slide 7 and it worked fine the first time through the preview, but then when I viewed the preview again, it started jumping back and would not even let me get to the questions. Can anyone help?

Normally the Next button on a question slide is not needed, because it has the functionality of Skipping the question. It is however needed if you want to allow Review.
Another explanation is that you did change the normal work flow for a question slide, where a two-step process for submitting will take automatically the user to the next slide.
Question Question Slides in Captivate - Captivate blog
What did you do to need the Next button? If the user submits:
Feedback appears with the indication to press Y or to click on the slide, happens at the pausing point of the Question slide (default is 1.5secs)
When user presses Y or clicks, the actions Success/Last Attempt are executed if all attempts are exhausted, and you have only 1 attempt on Question level: the actions are by default Continue, but you can change it to 'Go to Next Slide' to shorten the waiting time (or drag the pausing point closer to the end of the slide).
What did you change?

CP7 Advanced Action stopped working

I am trying to create a slide that gives answer specific feedback to a multiple choice practice question. To do this I am using the radio button interaction and an advanced action that displays the appropriate text caption box based on the selected answer. It also shows the "next" button allowing the user to proceeed to the next slide upon choosing the correct answer. I have used this method before successfully. It was working properly for this specific slide. Then, suddenly, on one preview it stopped working. Clicking the "Check answer" button has no effect. No text captions are displayed at all.
If you want to see the problem the (unfinished) project is here. Slide 6 is the problem. It should be behaving exactly like slide 4, and was at first.
I'm sure I did not inadvertently change anything about the slide or the action and have checked to see that everything is set properly. I have checked and rechecked the variable and action names for conflicts with other actions. I have restarted Captivate and restarted the computer. I tried assigning a different action to the "Check Answer" button then re-assigned the desired action to try to "reconnect" it. The action was working correctly each time I previewed the project until one time it did not work. It has not worked since. I believe that I only worked on static content slides between the working and non-working previews so I can't see what I could have done to break it. The problem occurs in both Flash and HTML5 and in both previews and published files.
I must have done something but I can't see what. Any suggestions would be most apppreciated.
I am using the latest version of Captivate - 7.0.1.237 - on Windows 8.1
Here is a screen shot of the action:
Thanks for anything you might be able to add here.

Thank you for your suggestions. Looking with fresh eyes today I found the problem. On checking the radio button interaction there was no variable listed. Somehow the variable holding the selection had become "disconnected" from the interaction. Re-entering it fixed the problem. Of course I only discovered this after deleting and recreating the actions and trying your suggestion of sharing the action from the other working slide. When none of these worked I was trying to figure out what else might be common to all of these "solutions" and eventually found it.
As for your other offered tips, I don't mind at all and welcome them.
I considered grouping items but unless I am missing something there is no group that is common to all options and can be shown/hidden together. I would have to create separate groups for each alternative answer which seems to me to be about an equal amount of work to showing/hiding individual items.
As for your labelling suggestions, I have adopted them and made the appropriate changes.
Once again, thank you so much for your time and efforts.

Advanced action not working on slide end

Hi,
I am new to captivate.
I am creating a toggle button. On clicking this button an image appear and disappear.
It works fine if I click the button before captivate slider reaches to its end. Slider stops moving when I click.
But if I try to click the same button after slider reaches to its end the button does not work.
I am applying the advanced action.
Pleae help me to resolve the issue.
Regards,
Anil Kumar Bakshi

I just set up the same toggle action but I had mine slightly differently set up so that:
If toggle == 0
Assign toggle = 1
Show img_1
Else
Assign toggle = 0
Hide img_1
This worked for me and clicking the button did not advance the slide timeline.
Do you have Pause After X seconds selected for the button properties under Timing accordion?
If your button is not pausing the slide and you allow the timeline to move beyond the button's active area (at the end of the slide or at the end of the button's duration on the timeline) then it will cease to work.

X48C - Anyone get 1N timing to work?

Hey there guys and gals,
Just recently picked up an X48C -converted over from Nvidia based boards as i didnt like the 780\790s- I am genuinely impressed with this board and what it can do thus far but there is just ONE snag -isnt there always-
No matter what I do or RAM chip I try I cant get the command rate to run at 1N.
I have manually entered 1N in the BIOS....no deal
Tried AUTO... it picks 2N of course
Tried 2N for fun -maybe they were somehow backwards? -... I got 2N...yay
Tried Kingston DDR2 667s on the approved mem list...worked at 1T in my 680i board...not here tho...2N all settings above tried
Tried Corsair DDR2 800s on the list... same results...ALWAYS 2N timing.
I currently use Patriot 1333's 7-7-7-20s -6-6-6-16 using XMP- I thought the XMP profiles and settings were messing with things but these dont exist on DDR2 667 and 800 so I'm stumped.
Anyone get 1N actually working? if so how the hell? and pls pls pls tell me
Thanks alot guys
My system:
E6700 2.66@ 3.37
2G Patriot 1333 @ 6-6-6-18
MSI NX8600GTS OC
SafePower 550 PSU

Quote from: RemusM on 01-June-09, 19:07:31
Are you looking for troubles?
p.s.
You won't see any performance boost between 1N and 2N on Intel (northbridge) based mainboards.
On contrary: 1N is a bad choice (stability issues).
cheers
WOW I cant beleive this thread has been replied to after all this time lol Over a year later....that has to be EPIC in some fashion
anywho....I stated my specs at the time in that message -i think it was cuz I just signed up and hadnt filled out my profile fully yet- and I'm glad I did now.
As you can see my system has gone thru a few changes since then. The DDR3 and the X48C havent been replaced or RMA'd and are still running at same speed, same volts. Tuff lil chips and they arent on the QVL Hey MSI ya might wanna add em! My retarded cooling helps stave off the heat or I'm sure they'd bake.
I disagree with your thoughts on 1N timing tho. On previous builds and ones for friends etc I have noticed improvements using 1N \ 1T timing. I will conceed that gain is never constant, meaning I cant claim "It's almost twice as fast!" or some other concrete measurement. It depends on the board maker, chipset used -ie X48, i975, BX440 ect- and RAM vendor \ chips used -qimonda, samsung etc-. As for stability, I have only known crappy value priced RAM to ever have issue with the 1N setting and not very often, these are also usually the chips to display the least amount of gain on that setting. Also , a value mobo from any manufacturer could also cause this....the 45 dollar mobo might not be the board for you if ya wanna run with as high settings as possible in other words. One could also compound the issue by combining the 2, somethin I never do
I had this same conversation @ guru3d.com in their forums etc I think it was.... neithere of us managed to convince the other tho lol It was fun
Zyro
PS
Just outta curiosity...what led you guys to this thread after all this time?

Did anyone get RFC callback to work?

Netters,
I cannot get a simple RFC callback to work. From an earlier post, the steps were:
1. Create the client class.
2. Create the server class.
3. Assign the "CallbackServer" property of the client class to the server class.
Sounds simple enough. However, there is one thing that is confusing. The generated server class takes two arguments in the constructor. The first argument is the list of string arguments and the second argument is an instance of ServerHost class. I guess these arguments make sense if I am writing a standalone server. In case of RFC callback, are we supposed to pass null as the arguments?
I tried using null parameters but still couldn't get the callback to work. Does anyone have a trivial example that you don't mind sharing?
Even though the connector is in beta stage, we have already started using it for our customers. The hope is that we would get the callback to work.
Thank you in advance for your help.
Pradeep

I just set mine up this evening. I bought it for the same reason as you (to stack). Worked Fine right out of the box. (My Mac wont read the CD that came with it though)
If you want to rename then you need to connect direct to the Mac.
One thing I am sure that I read in one post is that you may get interference from the hard drive which can effect the performance of the AEBS. I noticed this as well but have not experimented further.

Has anyone got Push mail to work after migration t...

Has anybody sucessfully got Push mail working after migration from BT Yahoo mail to the new BT Mail server?
I'm still on the old BT Yahoo mail server and Push mail works fine on my iPhone
But people have told me that once migrated to the new BT Mail server, Push mail isn't available
BT tell me that it is, but there's a couple postings on the web saying Push mail won't work
So, my question is, is there somebody out there who who has been migrated to the new BT Mail server and who can confirm they can still get their @btinternet.com address post-migration to work as Push mail on their iPhone or ipad devices?

There is no push mail on BTMail. Once you have been migrated to BTMail you will need to have your devices fetch emails. There is apparently no plans to change this.

I can not get my mouse to work after changing the batteries

I can not get my wireless mouse to work after changing the batteries

Some ‘dumb’ questions just so we don’t assume what you have done:
Batteries installed with both + poles pointing to the top as you hold the mouse?
Mouse switch has been returned to the ‘on’ position - do you see a green light? First it will be solid green and then flashing green as the mouse tries to pair with the computer.
Try clicking the mouse a few times as it’s trying to pair.
If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries. If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

Anyone get Advanced Actions to work after HTML5 conversion?

Similar Messages

Maybe you are looking for