Anyone get X99S Gaming 7 working with an XP941?

This FB post by MSI seems to indicate that an XP941 would work well with a new X99S board, but I can't get my new Gaming 7 board to even recognize that it has the drive in the M.2 slot. Has anyone gotten this board/drive combination working? I'm trying to figure out if the drive or the motherboard is faulty or maybe if the bios just isn't compatible with it yet.
Before you ask, yes I have the latest bios available on the download page, which supposedly adds support for more m.2 devices. I assume that with the popularity of the Samsung m.2 drives, the XP941 must be tested/working by now. Anyone know?

HALF-FIX found!
But another problem rises
Alright here goes: disable XMP
I bought two MSI x99s SLI PLUS, in part because I wanted to use the XP941 and it was recommended by MSI
One of the board strangely was not offering any XMP settings, on the first one when booting to UEFI it would display an XMP button, on the first board I activated it, on the second one it was just not available even if the exact same ram was used (Corsair vengeance DDR4 2800). When installing windows I noticed the XP941 was showing up, I was very happy and basically assumed the other one was defective.
The RAM thing kept being annoying me though and I noticed in MSI Intel extreme utility that when running the RAM stress test it would just fill 3112MB of memory rather than the whole 16GB, I thought maybe my RAM was defective in some way so I plugged the first workstation back and turned it on and ran the stress test on it again only to notice it would not fill the RAM on this system either. Happy that this was normal I rebooted disable XMP and entered 2666 as the speed leaving the processor at base value, this way both station would be identical.
That's where the magic happened, the XP941 suddenly showed up in the disk management utility and I was able to format it.
I still cannot booth from it though but as far as my needs are concerned using it as a data drive is all I wanted.
the 2nd problem remain; why is one board offering me an XMP option and not the other, should I worry about having defective RAM? (BIOS version are identical 1.10, the latest).

Similar Messages

  • MOVED: Anyone get X99S Gaming 7 working with an XP941?

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=183113.0

    HALF-FIX found!
    But another problem rises
    Alright here goes: disable XMP
    I bought two MSI x99s SLI PLUS, in part because I wanted to use the XP941 and it was recommended by MSI
    One of the board strangely was not offering any XMP settings, on the first one when booting to UEFI it would display an XMP button, on the first board I activated it, on the second one it was just not available even if the exact same ram was used (Corsair vengeance DDR4 2800). When installing windows I noticed the XP941 was showing up, I was very happy and basically assumed the other one was defective.
    The RAM thing kept being annoying me though and I noticed in MSI Intel extreme utility that when running the RAM stress test it would just fill 3112MB of memory rather than the whole 16GB, I thought maybe my RAM was defective in some way so I plugged the first workstation back and turned it on and ran the stress test on it again only to notice it would not fill the RAM on this system either. Happy that this was normal I rebooted disable XMP and entered 2666 as the speed leaving the processor at base value, this way both station would be identical.
    That's where the magic happened, the XP941 suddenly showed up in the disk management utility and I was able to format it.
    I still cannot booth from it though but as far as my needs are concerned using it as a data drive is all I wanted.
    the 2nd problem remain; why is one board offering me an XMP option and not the other, should I worry about having defective RAM? (BIOS version are identical 1.10, the latest).

  • Can anyone get Aperture to work with a new Canon 60D?

    I am using version 2.1.4 but dont want to upgrade to V3 unless I really really have to. Help!

    The support for RAW files must be revesed engineered because the camera companys don't share that information with either Adobe or Apple. So when a camera is released has very little to do with when they are supported. It is more a matter of how many changes were made in the new model. If most of the stuff for the old model only needs to be slightly modified then it quick. If on the otherhand it a total rewrite then it can take some time to get it supported.
    Allan

  • Can anyone get lion to work with the older intel core duo iMacs?

    Has anyone been able to get Lion to run on the older Intel Core Duo iMacs?

    http://osxdaily.com/2011/04/08/hack-mac-os-x-lion-for-core-duo-core-solo-mac/

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • Anyone tried to get Jabber to work with Domino for contact search

                       I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

                       I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

  • HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring.  Does anyone know what I could be doing wrong? Thanks!!

    The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring.  Can someone help me to get things working?  Thanks!

    As an IT person, I can put my hands up to the same difficulty.  Then on double clicking on Home button, find AirTV symbol amongst Music control
    Solved my problem having spent hours looking for a complicated answer.  Well done Apple for hiding it so well.
    Brian

  • Is it possible to get Siri to work with 'old' Car handsfree systems?

    Is it possible to get Siri to work with 'old' Car handsfree systems?
    Unless I'm missing something - Siri doesn't work well with older handsfree car systems - as typically the cars built in system handles the voice control and relays the request to the phone over bluetooth protocols.  I tried initiating siri standalone while connected to the car and it failed.
    I was hoping I might be able to do some sneaky like 'Call Siri' to enter Siri mode but it doesn't seem to work.
    I'm guessing future Car handsfree systems will be Siri aware - but making Siri work with older systems (and my car isn't old - it's a 2011 model) would be very useful.
    Has anyone come up with a workaround?  I really don't want to have to buy or use a bluetooth ear piece
    Thanks
    Adam

    I never heard anything on this and so am still unable to use Siri without touching my phone.

  • Just got an m:robe 500...anyone know if this works with Mac?

    Good evening.
    I got an m:robe 500 (i know, not that great but hey.. it's another toy..)
    Anyone know if you can get this to work with a Mac? Can you just drag and drop songs to it, or am I stuck connecting that to my Windows PC?
    Thanks.

    Check out this link:
    http://robe.infinitesimal.org/shighlight.php?file=robe_loader.phps
    It is the source for a Windows script that builds an xml directory from music files that the m:robe understands (and, apparently, is better than Olympus' m:trip software).
    Any enterprising Mac programmers out there who can port this to OSX (and perhaps improve upon it for images & videos)?
    Regards
    Old School G4 running Mac OS 9.2.2  

  • How do I get fios to work with my new desktop w/ Windows Media Center

    Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
    also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
    ** computer specs**
    Product number NZ017AA
    Introduction date 30-Jun-2009
    Country/region sold in: United States,Canada
    Hardware Base processor
    Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
    Chipset AMD 780G
    Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
    Power supply 300W
    Memory
    Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
    4 GB* (4 x 1 GB) (32-bit OS)
    *Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
    Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
    This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
    Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
    Wireless Wireless LAN 802.11 b/g
    Video Graphics Radeon HD4350
    512 MB DDR2 memory
    I/O Ports: HDMI, VGA, single-link DVI
    Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
    Sound/Audio High Definition 8-channel audio
    ALC 888S chipset
    Network (LAN) Integrated 10/100/1000 Base-T networking interface
    Memory card reader
    Contains an Infrared receiver for remote control
    Supports the following cards:
    Compact Flash I
    Compact Flash II
    IBM Microdrive
    Secure Digital (SD)
    mini-SD
    MultiMediaCard (MMC)
    Reduced size MultiMediaCard (RS-MMC)
    MultiMediaCard Plus (MMC plus)
    MultiMediaCard Mobile (MMC mobile)
    Memory Stick
    Memory Stick Pro
    Memory Stick Duo
    Memory Stick Pro Duo
    SmartMedia
    xD Picture Card (xD = extreme digital)
    External I/O ports
    I/O ports on the front panel
    Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
    I/O ports on the back panel
    Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
    Expansion slots
    Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
    Drive bays
    Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
    Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
    Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • I have a Power Mac G4 and i am trying to get it to work with my LCD

    I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

    Hi-
    A little more info please.
    What model G4?
    What Graphics card?
    What OS?
    What model/make of monitor?
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

  • I need help with ISIGHT!  I can't get it to work with MSN!

    HI,
    My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
    My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
    I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
    ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
    Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
    THANK YOU

    Microsoft's Messenger for Mac (MSN) does not support webcams at all.
    I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
    aMSN can be found here: http://amsn.sourceforge.net/
    macam can be found here: http://webcam-osx.sourceforge.net/
    The speed is substantially faster and it is far more stable than Mercury in my experience.
    The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

  • I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161.  Any ideas?

    I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161.  Any ideas?

    The latest Apple driver support begins with the MP 171.
    Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
    Hopefully, this will solve your device issues.

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

Maybe you are looking for