Anyone getting error -43 when backing up phone?

After installing the new software, when backing my iphone an error continues to occur (error -43). Does anyone know how to solve this?

Hey!!
After many failed attempts this is what worked for me:
Step 1. Right click on your phone in the left hand side bar and select Back Up
Step 2. Restore your phone and use the option where you restore and update
Step 3. When its done it will ask you to use the back up you previously completed
Hopefully this works for you!!!

Similar Messages

  • I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

    i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

    If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD.  Files can sometimes go bad and become corrupted.  As to how or why that happens, there are a number of ways.
    What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
    iTunes: How to convert a song to a different file format
    B-rock

  • My iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore

    my iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore

    Hey p0507!
    Here is an article that addresses your error message, and can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • TS1424 i'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT201263 Hi I keep getting error 4005 when I attemp to restore my Ipad. Had to restore back to factory settings as my daughter changed password, forgot and I did not back up my ipad to icloud. Help will be appreciated. Kevin

    Hi I keep getting error 4005 when I attemp to restore my Ipad. Had to restore back to factory settings as my daughter changed password, forgot and I did not back up my ipad to icloud. Help will be appreciated. Kevin

    http://support.apple.com/kb/TS5314
    https://discussions.apple.com/thread/5381335
    https://discussions.apple.com/message/23609307#23609307
    more
    https://www.google.dk/search?q=apple+restore+error+4005&oq=apple+restore+error+4 005&aqs=chrome..69i57j69i60.7969j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

  • Error -43 when backing up iPhone for update 5.0

    I'm trying to update 5.0 on my iPhone 3gs and am getting error -43 when the phone is being backed up. Help! I waited a half a week hoping that the problem would go away, but it hasn't.
    I've read that some other users have erased everything on their iPhone so that they could update, and then manually installed everything after, but I don't have half a day to spend on this.
    Any ideas?

    Well, I've since taken the plunge and tried to update anyway, by restoring the iPhone, thinking I could restore from my backups. Now turns out that I can't restore because "the backup session failed". Goddammit.
    This is the biggest problem I have with my iPhone, that iTunes is such an abominable piece of software. I just want to get iOS 5 on this phone so I can leave iTunes behind.

  • Error message when backing up with Deja Vu

    Hi,
    I am getting this error message when backing up with Deja Vu
    symlink(/,/Volumes/Backup HD/Volumes/Server HD) failed at /usr/local/bin/psync line 240.
    symlink(/var/clamav/.spamassassin,/Volumes/Backup HD/private/var/amavis/.spamassassin) failed at /usr/local/bin/psync line 240.
    Below is the line 240 of /usr/local/bin/psync
    symlink($slink, $dpath) or warn "symlink($slink,$dpath) failed"; ###js added $opt_a and warning
    Anyone has an idea?
    Cheers
    Ben

    The mail system can be backed up with mailbfr and the resulting backup subsequently with any decent backup software. mailbfr will make sure the mail system is stopped while backing up.
    A server is always tricky to backup, because it is always in a "fluctuating" state. Ideally all services should be stopped before a backup. Some will not cause major issues, others like mail will. Unless you have some sort of raid setup, where you can take a disk offline for backup purposes, you will always have to be very careful.
    I would look for service specific scripts on an as needed basis. There are some around for SQL for example.

  • I keep getting error message when trying to sign in for iMessage with my Apple ID since upgrading to iOS 7

    I keep getting error messages when I try to activate iMessage on my iPad since installing iOS7. Anyone else having this issue or a solution. I can obviously sign in with the same Apple ID information/password as I have done here and I am connecting with Wifi now and in all other apps.

    After looking at some other posts I signed into iTunes and edited my password with my Mac. Then I powered off and restarted my iPad and all is good now.

  • Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Make the reservation by phone. 

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • Get error message when trying to install windows. need to remort hd. how to

    tried to install xp with bootcamp. get error message when trying to partion the disk:"the disk can not be partioned because some files cannot be moved.
    back up the disk and use Disk Utility to format it as a single Mac OS Extended
    (Journaled) volume. Restore your information to the disk and try using Boot Camp
    Assistant again."
    bought an external hd and used time machine to back up everything. do not understand how to reformat the hd with disk utilities. any help is appreciated

    Hi and welcome to Discussions,
    have a look at the answers in this thread http://discussions.apple.com/thread.jspa?threadID=1972468&start=0&tstart=0 for an easier way to do this.
    Regards
    Stefan
    Message was edited by: Fortuny

  • Just recently getting error message when downloading podcasts.  Says "The iTunes Library file cannot be save.  You do not have enough access privileges for this operation."  Doesn't happen every time.  Using Windows 7.  What can I do?

    Just recently getting error message when downloading podcasts.  Says "The iTunes Library file cannot be save.  You do not have enough access privileges for this operation."  Doesn't happen every time.  Using Windows 7.  What can I do?  The files seem to be there but I don't know if they are being backed up to cloud.

    Hi, DickmoAZ.  
    Thank you for visiting Apple Support Communities.
    This sounds like a permission issue most likely with the iTunes Media folder.  Here is an article that will help you troubleshoot this issue.
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Cheers,
    Jason H.

  • Keep getting error 4002 when trying to update Genius

    I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
    The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.

    Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.

  • I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

    I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • ERROR report when backing up of ipad

    I get repeated error reports when backing ipad only when trying to update to ios 5. when I back up without update option it works fine
    i have version 4.3.1 and want to update it.help!

    Disable your security software and try again.

Maybe you are looking for

  • Windows 7 with MDT - Novell Client / Zen Agent?

    Been creating my Windows 7 reference image using Microsoft Deployment Toolkit (MDT - pretty cool). I'm wondering if any of you do the same, and if you do, do you include the Novell Client in the image? what about the zenworks agent? If so, what techn

  • T420: Random freezes on Debian Wheezy

    Hi all, I have a T420 with integrated Intel Graphics. 1-3 times a day mainly when using chromium or iceweasel (debian version of firefox), my thinkpad would become unresponsive and all I can do is a hard reset. While this is only a bit annoying so fa

  • Problem in jdk1.6 installation on win NT service pack 6

    Hi All, I am trying to install jdk1.6 on windows NT service pack 6. First it ask for windows installer 2.0 or later then i install intaller 2.0. Now when i try to install jdk1.6 it ask for some dll(dll name does not specified). Can anybody tell me wh

  • Recover files from ocfs2

    Hi everyone, we had a problem on Oracle Virtual Machine and a whole repository was deleted. This repository was on a storage disk on OCFS2. Is there any way to recover deleted files from a OCFS2 file system? I know it is possible with debugfs and lsd

  • Show/Hide/Set Link in Property Inspector?

    I know that CS 4 is still in beta, but I must be missing something: I = can't find the ability for me to select something on-screen and be able = to "set" it's link I either typing a filename or by "dragging" a pointer = to a filename in the files bo