Anyone getting screenshots when they press sleep/lock on iphone 5?

I got my iphone 5 replaced 2 months ago because the lock button was unresponsive. Now I'm having problems again with a totally new phone! This time whenever I press the lock/sleep button to wake or shut down the phone my phone takes a screenshot!!! Anyone else having this problem? I'm hoping it's a software thing in ios7.0.3 but I doubt it. It does it about 50% of the time and it's getting worse.
My phone isn't under warranty now. Really upset about this. I keep good care of my phone too. I didn't even drop it.

Your phone should still be under warranty. replacements get the rest of the original warranty, or 90 days, whichever is more, so if it was only two months ago, you are still covered.

Similar Messages

Anybody that I add to my bbm service doesn't seem to get any request to be added nor do I get one when they add me

I need some help guys, I have a BB 8320 Vodafone which was from the UK and the person that I took it from unlocked the phone and passed it on to me now. I have a few issues with the BBM service.
I have recently activated my BBM service by choosing a particular plan that my carrier offers, and I have noticed that the edge now can be seen in uppercase which means the service has been activated and should work. But, anybody that I add to my bbm service doesn't seem to get any request to be added nor do I get one when they add me. I have been facing this problem with my BBM and I am not sure how to go about it.
I need a few clarifications first and foremost, when a BB 8320 phone is unlocked does it mean the phone has been unlocked so other carrier sim cards work or all the feature on the BB 8320 phone unlocked. Secondly, considering i'm in a situation like this, what should I be doing to resolve this issue at the earliest, do I go to a technical desk guy and ask them to re-install the Black Berry OS on to my phone all over again or do I just throw away this piece of **bleep** that BB has created?
And could anybody let me know doesn't BB have a universal software that let people put any sim card and work rather than have carrier specific software? Please need help really bad on this one!!
I would really appreciate if some body can help me out in resolving this issue with your comments.
Thanks much in advance who ever you may be!

It really doesnt work not e en on my bberry8350

HT201328 Hello I bought my iPhone from liverpools apple store, I put a giffgaff cArd inside and it locked my phone into 02 network. I contacted o2 as you suggested and they told me that they didn't lock my iPhone. Please find me some gelp

Hello I bought my iPhone from liverpools apple store, I put a giffgaff cArd inside and it locked my phone into 02 network. I contacted o2 as you suggested and they told me that they didn't lock my iPhone. Please find me some help

I guess you mean unlock the device. To lock it would mean to be possible to se it only with one carrier.
So no, unlocking the device must be done by the original carrier, you should contact them to do that.

When i press sleep wake button to turn on my iphone 3gs all i get is a white screen

trying to open the phone to make a call or answer the phone when i press the sleep wake button all i get is a white screen and cant do anything with the phone constantly turning phone on/off eventually my home page does return anyone know why and what to do.. thanks to all

MacBook Air Mid 2012?
"Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. These systems were sold between June 2012 through June 2013."
http://www.apple.com/support/macbookair-flashdrive/

I don't know why my iMac never turns when i press sleep

I NEED HELP! Whenever i press sleep on my iMac the screen will turn off but the engine is still running because you can hear it. It used to turn off but now i don't what is happening i need help

Go to System Preferences > Energy Saver
Make sure that the "Computer sleep" slider is not set to "never"
And that the item named "Put the hard disk(s) to sleep when possible" is checkmarked.

HT1430 MY IPHONE 4 WILL NOT RESTART WHEN I PRESS SLEEP/WAKE BUTTOM

I press sleep - wake button and it will not start

Then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This should reboot the phone.

How to get notified when another device is tracking my iphone

I will like to know how can get an email when someone else is tracking my iphone from another device

Don't give anyone else your Apple ID password and they won't be able to track you.

Sleep/Lock button iPhone 4

Bought the iPhone 4 like a month ago.
Great device but I just got this minor issue.
Been using the APPLE BUMPER on it and since a day or two the sleep/lock button has been stuck. I need to push it REALLY hard and then it'll work.
Already called my service provider (since Apple doesn't have any support overhere) and they told me that it's my own fault and they can fix it for 300 $ (that's 215 euro's for JUST A SLEEP/LOCK button).
Does anyone else had this problem also and what can I do about it?

See thread 2713539. You're by no means alone. Mine did it after about 7 months. It's not your fault, it's a fault with the iphone4 that Apple need to address and help their owners with. It's disgusting that owners are being charged for repairs. My understanding is that if it's within warranty, you can take it to an Apple Centre and it will be replaced with a refurbished unit immediately as there is no quick repair for this common design/manufacturing defect. I love my iphone but am not happy that outside warranty it seems you will be lucky if Apple don't just fob you off and make you pay for a hardware problem they know about but won't take liability for. I guess they're not making enough money.

Why do screenshot borders get cropped when they're imported?

Hi, FrameMaker 10 Windows 7, images created in SnagIt 10 and then SnagIt 8.
Hi,
First of all thank you for your great help, especially Van Kurtz! Now I have another problem.
When I take a screenshot, I put a border around it in SnagIt. I import the images in anchored frames, which I've managed to tame. However, the image imports without borders. I use 300dpi and tried reducing to 275, but I can't reduce any more as the company requests that we use 300 and also, the images would be blurry.
After I import, I hold the Shift key drag the border of the image to get it the size I want in the anchored frame (BTW is there any way to do this automatically, as in InDesign?) and there is still no border (and there wasn't one when the image was originally imported).
Why is the border cropped? This usually happens at only one or two sides, not completely, usually the bottom or right sides, and randomly. The image is always well inside the anchored frame.
Thank you so much in advance!
Susan
PS I thought this might be solved when I saved the doc as PDF, but no. And the printed doc is identical to the PDF on the screen.
PSS Is this the fault of the older version of SnagIt (8)? I used SnagIt 10 til my trial ran out and then was forced to switch to 8. It may just be that I didn't notice this problem until recently, but some of my images in the document ARE okay with borders complete.

> The choices are expressed in dpi with inches (or points or picas) in parentheses.
For a bitmap imported as EPS (and, I suspect, PDF), the choice is a percentage, default 100%. FM won't give you any clue about what the originating dpi is, so you have to know, if you care. And the preview image is of no visual help, because it will be a coarse 72 dpi indexed color at 100%.
> NOTE this does NOT change the logical resolution (dpi) of the image, just the physical display size.
Strictly speaking, it does change the dpi. What doesn't change is the overall pixel dimensions. If you import a 1x1inch 100x100 dpi screenshot TIFF at 2x2 inches, it will be 50 dpi (but still 100x100 pixels).
Borders can be applied by Framemaker itself, and they will be vector, and not subject to scaling, aliasing or vanishing at small scales. Applying borders prior to rasterization or in a raster editor often has unhappy results.
Next hurdle: rendering to PDF. Save-as, Print-to or Distill are all subject to the Job Options, which can easily have defaulted to "subsample to really blurry with nasty compression artifacts". Make sure the settings preserve the res you desire for the data structure involved (bitmap, contone gray or contone color). e.g. "downsample to 300 dpi for images above 450 dpi", and LZW or ZIP compression for screenshots, as a rule.

Anyone else getting an unknown error 13019 when they try to sync their iphone?

Every time I try to sync my phone I get an unknown error 13019...Suggestions?

Type "13019" into the search bar at the top of this page by "Support"

HT4061 Cant get power to ipad, When i press sleep i keep geeting picture on screen of Cable connect and itunes symbol Even plugged into 110 cant get it to start

Cant power up IPAD. When i turn on i see apple (Normal ) then ipad shows a screen with cale connector pointing (Arrow ) to itunes symbol Ive tried charginf with my 110 adaptor but still no luck ?? Help please Jack Freeman

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Anyone get this when opening projects on other systems

Have a project running on my mac pro (system A)... put everything on an external drive... open it on another identical system (system B), and get this:
Premiere CC 2014 Timeline Issue - YouTube
It does not matter which way I go... (A to B or B to A) every time I bring the project to another system I always get this issue.
The only time it opens ok is when the project relinks media from the system the project was saved on.
The best workaround is to start a new project and drag the project I want to open into it.
Cheers

Sorry but ... from the PP manual... if you have ever read it???
Clip instance
A dependent reference to a source clip, used in a sequence. Each time you add a clip to a sequence, you create another instance of the clip. A clip instance uses the name and source file reference used by its source clip. While clip instances are not listed in the Project panel, they are differentiated in the Source Monitor menu if you open instances there. The Source Monitor menu lists instances by name, sequence name, and In point.
Hope that helps you understand the correct terminology.
Anyway, I was wondering if anyone can try to duplicate my issue??

Password file gets changed when an account is locked/unlocked in 9i !!

Hello All,
I observed that in 9i (9.2.0.8 and 9.2.0.6 on Solaris 9), the timestamp of the orapw<SID> file changes when a non-sys account is LOCKED/UNLOCKED. There is no change in the size of the file, but timestamp alone gets changed to the time the account is locked/unlocked.
orapwd<sid> stores the password for administrative accounts, what has it got to do with non-sys accounts( an account with just create session privs ) ?
Is it the expected behaviour ?
TIA,
John

Hi,
You can create a user defined metric which will query the table "dba_users" and check for "account_status" and will alert you whenvr usr is locked.
You can find the link for creating "user defined metric" at "Related Links" section at the bottom of database homepage in OEM.
Hope this helps...

Why do my photos get blurry when they are enlarged to full screen from the disc I burn, or played on the t.v.? I set the burn on the highest quality. The photos don't look blurry when enlarged from iphoto on the computer.

Why do my photos that are transferred from iphoto to idvd, and then burned on DVD, look blurry when the idvd is shown full screen on computer or on t.v. They don't look blurry when I enlarge the iphoto pics on the computer. I used the 'prof. quality" encoding setting before burning, and before putting photos on idvd.

Hi
DVD is as standard - only interlaced SD-Video (as on old CRT-TVs) and can never be any better than this.
This is less than a quarter of Your Mac screen resolution.
That's one part of Why You can see High res. on Your Mac - and not on DVD.
Next part is what program is used to make the SlideShow.
If You use iMovie'08 or 09 or 11 - to make it - it too degrades the final result as non of them can deliver interlaced SD-Video to iDVD but only half (every second line in the picture)
I use
• iMovie HD6 or
• FinalCut (any version) or
• FotoMagico™
As they all delivers 100% of what iDVD or Toast™ or DVD Studio Pro or Whatever needs.
Yours Bengt W

Why won't illustrator Cs5 allow me to copy and paste layers when they aren't locked?

I am working on a project and when I try to copy and paste unlocked layers to paste them in to another image it doesn't paste. The only thing it pastes is the text unformatted. I tried resetting the settings by removing the setting file to see if I can set Illustrator back to square one and it isn't working. See Picture for before (copy) and After (paste)
Before
http://i.imgur.com/rqJhc.jpg
After
http://i.imgur.com/FN0jA.jpg
I am also using windows 8 on a pc. I would say it was the OS but it was working fine untill yesterday. I am begging for help on this. It is really ruining my work flow today.
Thanks for any help you can give.

I just opened the document "san_jan_email.ai" and this is what i see:
i didn't try to copy and past yet, cause the document it seems fine, have you fixed it? otherwise i can say another stupid thing, i dont know if it's cause the document is too "heavy" for your computer? have you seen if you are not going out of ram or of some hard disk space? at first i could thinking about resetting the settings in Illustrator but since you just said that you already did it, and also that you tried with a CS6 copy, i think it's not that the case.
edit: i tried to copy and paste as well, for me it's working.

Anyone getting screenshots when they press sleep/lock on iphone 5?

Similar Messages

Maybe you are looking for