Anyone got an ethernet cardbus/pcmcia working with 10.5?

My ethernet port packed up but I got a DLink DFE-690TXD cardbus/pcmcia card working OK under Tiger. But after upgrading to Leopard it's now not working as noted on http://forum.insanelymac.com and on the post (http://discussions.apple.com/thread.jspa?messageID=8388326&#8388326). However these sources report that some gigabit ethernet cards (RTL8169 chipset?) work under Leopard without the need for a driver.
If anyone has got one of these working then it would be very useful to hear which card you have.
Thanks

The lexmark P190 series driver is built-in to Leopard:
http://docs.info.apple.com/article.html?artnum=306684
The Lexmark SW you installed is really, realy old. Print Center was last seen in 10.2!! It was replaced in 10.3 with Printer Setup Utility. As you noted PSU was moved into System Preferences in 10.5. So I would not really trust Lexmark SW that is that old. Lexmark doesn;t always get things updated that quickly...but is has been a while since 10.2.
You should be able to remove the Lexmark SW (remove/Library/Printers/Lexmark). Then you can re-install the Lexmark drivers that came with Leopard from the DVD. Try those....They are Way newer what you tried.

Similar Messages

Has anyone got Client (Mutual) Authentication to work with 6.0 SP2?

I 've been unsuccessful and was just wondering if anyone has done it...
Kirk

The questions is "Where do you get a root ca file for a verisign trial client cert?" I've looked everywere on verisign's site without luck. BEA support emailed me one but can't remember where/how they
got it....
Kirk
Paul Ferwerda wrote:
I think that the Server Certificate Chain File Name contains a sequential list of certificates, the first of which was used to sign the cert in the "Server Certificate File Name" and the last is self-
signed (ie a root ca). There is a minimum of 1 cert required in the Server Certificate Chain File Name (which would be the self-signed cert that signed the cert in the Server Certificate File
Name file. As you walk through the certs in the Server Certificate Chain File Name each cert is expected to be signed by the following cert (if there is one) and the last one must be self-
signed.
The Trusted CA file on the other hand is a collection of self-signed CAs on which no validation is performed and no relationship is assumed between the certs in that file. My guess is that
the code expects that each cert in the Trusted CA list is self-signed.
So the Server Certificate Chain File Name contains a chain and the Trusted CA File Name contains unordered self-signed certs.
Paul F.
On Thu, 2 Aug 2001 18:52:38 +0200, "Bart Jenkins" <[email protected]> wrote:
Kirk,
The PEM file we grabbed from the Verisign site worked in the "Server
Certificate Chain file name" entry but NOT in the "Trusted CA File Name"
entry. The guy at support in BEA thought it should have worked for both.
I'm sure I could append the "Trusted CA chain" to the PEM file that I'm
using for "Server Certificate Chain File name" and then I could use one file
for both...
Could you post yours or send it me via Email so I can have a backup? I'd be
curious to compare your rootCA list with mine. I'll use whichever has the
most entries. If my list has more rootCA certs in it I'll pass it along.
ok?
'preciate it.
Bart Jenkins
[email protected]
"Kirk Everett" <[email protected]> wrote in message
news:[email protected]...
So if the one you got off verisign didn't work, where did you get the onethat
worked? The one BEA sent me works for mutual auth.
Kirk
Bart Jenkins wrote:
Kirk,
My security expert found it buried deep in the Verisign site. Have
you
successfully tested the Mutual Authentication? The root CA we found onthe
Verisign Site allowed us to connect via HTTPS but failed on the 2-way
authentication.....test it...
I actually mailed the .PEM file we found from Verisign to BEA support
because I also had an issue open on this with them...it would be funnyif
they then turned around and mailed it to you...
If you get stopped...give me a shout...
good luck
Bart Jenkins
Globeflow SA
[email protected]
"Kirk Everett" <[email protected]> wrote in message
news:[email protected]...
Thanks. I finally got it working yesterday. Apparently, I was not
using
the
correct root ca. Support
mailed me the root ca they were using and everything works fine now.The
problem is that I still
don't know where on Verisign's site to go to get the root ca. Where
did
you
get yours from?
Kirk
Bart Jenkins wrote:
Kirk,
I've finally got it working today. I've got a Class 3 Verisign
certificate on the WLS 6 server and a personal Verisign Class 1 cert
on
the
client browser (IE 5.5) and am able to connect via HTTPS in 2-way,mutual
authentication. Tell me where you are blocked and I'll try to help.
Bart Jenkins, CTO
Globeflow SA
[email protected]
"Kirk Everett" <[email protected]> wrote in message
news:[email protected]...
I 've been unsuccessful and was just wondering if anyone has done
it...
Kirk

Anyone got Machine 1.5 to work with Logic

Hey all,
I've got Maschine loaded as an AU unit and it works in so far as I can hear sounds and play using Maschine. However, Logic doesn't record anything or remember anything about the state of Maschine, so it's not saving any midi or audio info.
Has anyone got Maschine working in the same way as the Ultrabeat drum sequencer? So I can create patterns on the Maschine, then trigger them via Maschine while I'm recording.
Failing that, has anyone got Maschine to actually record anything in Logic?
Thanks

Hey Faisal,
I've watched the video at
http://www.native-instruments.com/index.php#/en/products/producer/maschine/?cont ent=1150&category=1&sortby=relevance&splitscreen=1&page=1447
I can drag and drop patterns, but it's unclear whether Logic then plays that pattern or simply triggers Maschine to start playing.
I can't get Maschine to synchronise its midi as in the 'Record Events Directly into DAW' section. This might be because I can't set it up to both send and receive midi to/from Maschine. Any idea how this is done?
Thx
Sam

Has anyone got an iBook G3 to work with an iPhone hotspot?

hi! First question here, and its been a real headscratcher.
I have an iBook G3 with 128bits airport card (picking up and connecting to routers no problem)
I also have an iPhone 4 which I've used as a personal hotspot, providing internet to my Macbook pro for around year.
Now as you can imagine, I've discovered that although the G3 discovered my iPhone, when i enter the password and hit connect, i get a glorious error. It say it could not connect because of a problem with encryption.
After a lot of internet research, I discovered the old, original Airport card does not support WPA2 encryption, which annoyingly is the encryption my phone uses.
Ok, so options... 1 can i upgrade this card? 2 Can I download software (3rd party?) to get around this problem? 3 Can i tell my phone to use WEP encryption? 4 Can i use an external (usb?) Wifi adapter? Ive also seen the possibility of Bluetooth or USB tethering? 5 Would a Bluetooth adapter work?
Any advice or solutions/suggestions would be incredibly welcome. As i've discovered there are a lot of questions about this online but few working solutions.
iBook G3, 500Mhz, 256RAM, 10gb HDD

Hi, and welcome to Apple Support Communities.
Question: If you have a MacBook Pro, why are you wanting the iBook G3 (which is 11 years old at this point) to work with an iPhone hotspot?
Why not just use the MacBook Pro?
That said, the MAXPower device is available at Other World Computing, if you really want to try it:
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
And if you'd rather use a cradle instead of plugging it directly into a port:
http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
To boost your speed a little, you may want to consider maximizing the RAM with a 512 MB module:
http://eshop.macsales.com/item/Other%20World%20Computing/100SO512328L/
Good luck.

Anyone got an HP 1022nw printer working with a Netgear DGN2000 router?

I recently changed my router In readiness for the arrival of my new MBP.
Now I can't print wirelessly on my HP printer (1022nw) from any machines on the network, irrespective of whether security (eg. WAP) is set up, or it's left open and unprotected.
I think I've worked through most things - initially on the Tiger forum, when using my old iBook G4 - but without success. Full details here: Link: [http://discussions.apple.com/thread.jspa?threadID=2054454&tstart=0]
But now I'm on the new MBP full-time, I wondered if anyone here has had any experience of the same combination > Netgear DGN2000 + HP 1022nw. It can't be that unusual a pairing.
None of my machines (including 2 iBooks with Tiger + 2 Macbooks with Leopard) can print wirelessly - but all of them did on the previous router - the old Netgear DG834G.
Feedback of any sort would be much appreciated - if you have any positive ideas/solutions, even better!

Have you posted in the Printing, faxing and scanning forum here?

Has anyone got HK iSub v1. to work with Intel iMac?

System preferences does not see the device at all. Have tried different ports with and without USB hubs both through a Series 1.0 and Series 2.0 with no luck. Any suggestions? Or is it time to retire the thing? Pity though it sounds great and still looks good!
Any advice appreciated.
-RG

I had the same problem and got it straightened out at the local Genius Bar! Did you transfer your folders from a previous Mac on your Intel iMac? The prefs transferred over too and may be corrupt.
1) Create a new user and give it admin privledges
2) Under "Library", drag and drop the Audio (which may not be necessary) and Preference folders onto desktop.
Log out and restart.
Log back in as yourself and let it fly! By dragging the Prefs folder onto desktop, at restart your iMac rebuilds the Prefs and overwrites previous corrupted Prefs.
Now I need to figure out why my Sony CyberShot isn't recognized on my USBs! Maddening!

Has anyone got dynamic version support to work with the HTML converter?

I have tried this for some time and followed all the guidelines, but it still don't work. Could someone post the HTML-code for a working applet that is converted with dynamic version support ?

Using 1.4.1_03
java -jar htmlconverter.jar -gui
selected directory, "Standard" template file, "Use any Java 1.4, or higher"
<html>
<body>


<OBJECT
    classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    WIDTH = 200 HEIGHT = 100
    codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4-win.cab#Version=1,4,0,0">
    <PARAM NAME = CODE VALUE = Version.class >
    <PARAM NAME="type" VALUE="application/x-java-applet;version=1.4">
    <PARAM NAME="scriptable" VALUE="false">
    <COMMENT>
     <EMBED
            type="application/x-java-applet;version=1.4"
            CODE = Version.class
            WIDTH = 200
            HEIGHT = 100
         scriptable=false
         pluginspage="http://java.sun.com/products/plugin/index.html#download">
             <NOEMBED>
          </NOEMBED>
     </EMBED>
    </COMMENT>
</OBJECT>


</body>
</html>

HT4759 Has anyone got outlook on windows icloud working with you OS devices?

I have my eamil account creates, and its is live, but I cannot get icloud to syncronize with the account. Any tricks out there? What about my business accounts? do I need to copy this over everytime? Any help would be well appreciated

DQDUDE wrote:
I have my eamil account creates, and its is live, but I cannot get icloud to syncronize with the account. Any tricks out there? What about my business accounts?
Business accounts should not be on a free service, unless you consider them to be worthless.
What is this email that won't sync, is it an iCloud account or some other?

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

Anyone get iZotope Vinyl UB to work with the following...?

Anyone get iZotope Vinyl UB to work with the following...?
I keep getting an error -1 when I try to load it in Logic pro. I tried emailing iZotope about this but never got any response. Any help would be appreciated.
I'm running:
50gb HD space available.
3GB Ram
Power PC Dual 1ghz
Logic Pro 7.4.7
Mac OS X 10.4.7

Vinyl 1.7.3 loaded and ran fine on my system. Try removing the AU and any supporting files and receipts and re-installing Vinyl again.
And, yes, Vinyl is UB (don't know what possessed a13 to ponder otherwise).
jord

Has anyone got a Sony EX3 to work in this program?

Has anyone got a Sony EX3 to work in this program?

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro? The internal disc drive broke after apple care expired, natch.

Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro? The internal disc drive broke after apple care expired, natch.

No, sorry. it won't work with the 2007 MBP. You can replace the optical drive yourself - just go shopping at OWC.
Good luck,
Clinton

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?

Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav? I don't care about the HondaLink- just the hands free phone call/receive.

My 5 starting doing this today....constant rebooting and or shutting off even after restoring to new phone. Would love some impu!!

Anyone got an ethernet cardbus/pcmcia working with 10.5?

Similar Messages

Maybe you are looking for