Anyone got the AIR-CT2504-HA-K9 to work on N+1 Redundancy ?

Hi Guys,
Seems like the new Part #AIR-CT2504-HA-K9 needs some kinda licensing...to work... otherwise the redundancy is same as it was ealier with mobility groups.
The documentation seems to be wrong in the case of 2504, i cannot find the redundancy button in the Wireless tab too, When i apply the Evaluation license redundancy is working.... did anyone else face the same Issue ?
Regards,
Vinu

i cannot find the redundancy button in the Wireless tab too
You mean AP SSO?
WLC 2500 will not support this feature.

Similar Messages

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

Has anyone got the IIS Policy Agent 3.0 working with an ASP web application

Hi,
Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.?
I have installed the 32bit version of the agent as my web site must support 32 bit applications.
I have created a simple web site which works fine with the policy agent configured if the page is html, If I rename the html page to be of type asp I get an Object Move error.
I would much appreciate if someone could confirm if they have managed to get an asp web site working with the policy agent.
Note: The Policy Agent 2.2 worked perfectly with asp on IIS 6.0.
Thanks in advance,
Tommy.

I managed to make Agent 3 work with IIS 7 for a sample application based on aspx in Dev environment .... after modifying the sample application, I got the same errors as "Object removed" and others .... I have no idea what the hell. Fortunately, a super .Net start here spent a few minutes to do some twicking on IIS, and make it work again .... don't ask me what he did, I am pretty dump, and no idea. :)
Thanks

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

HAS ANYONE GOT THE FLASHPLAYER ON A IPHONE 4 PLEASE

HAS ANYONE GOT THE FLASHPLAYER ON YOUR IPHONE 4 PLEASE OR WISH ONE WILL PLAY THE TWITTER MOVIES PLEASE?

iOS devices do not support Flash.

I am running an Apple imac G-5 with OS 10.5.8. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.

I cannot purchase level 96 on candy crush saga. It says there is an error with my account payment, there is money in there to support a purchase. Anyone got the answer for me, please ?

I cannot purchase level 96 on candy crush saga as it says there is an error with my payments. There is money in the account, as I have checked. Has anyone got an idea of what the problem is ? Please.

https://expresslane.apple.com/Issues.action

Has anyone got the Lion Server wiki to work?

I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app. Has anyone got this to work? If so, how do you do it? I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this. Thank you in advance for any guidance.

I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki. I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that. It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server. Anyway, the problem is solved for now.

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

I previously had an iPad 4 but have now got the Air. Everything was backed up to the cloud but my various photo albums do not contain all my photos. It just says downloading but it never happens.

I have just upgraded to the Air but am having trouble with my photos. Everything was backed up to the cloud before I set up the new iPad but many of my photo albums are empty or contain only one or two pictures and it says it is downloading but nothing happens. I upgraded from a 4. I have had all the iPads and have never had this problem before. Can anyone help please?

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
Peace, Clyde

Anyone got the SimpleCertAuthenticator example working with 5.1??

The SimpleCertAuthenticator example that does the client certificate to user
mapping doesn't seem to work. I followed the instructions and tried many
times
without luck. Any comments? Like where to look for error messages? Thanks.
Honbo

I got the example working on wls 5.1 using sp8 both in Linux and NT.
Try to print something in the SimpleCertAuthenticator constructor, because the
SimpleCertAuthenticator is instantiated during startup, be sure that you can see
the startup so that you can verify if the handle has ben installed correctly.
"Jayesh Patel" <[email protected]> wrote:
It also not working for me.
I have tried using both 6.0 sp1 as well as 5.1 sp8 .
Let me decribe what I did and let me know if I am missing any thing -Thanks
1) Installed personal certificate(from verisign)
3) Enforced client cert in console
2) exported CA file and pointed in clientRootCa
3) created user with emailId in cert
4) set cet authnticator to examples.security.cert.SimpleCertAuthenticator
5) Restarted server
6) invoked one servlet using https , browser propmpted for certificate,
but
thereafter it
says page can not be displayed. Unfortunately I don't have error
mesage
to know what
went wrong? I tested with same request with not ssl connection it
works.
i also put
systme.out.println in SimpleCertAuthenticator and it fails before
it.
"Peter S. Wong" <[email protected]> wrote in message
news:[email protected]..
Have you tried using it with the jaas example?
It works with that example in 6.0sp1.
Peter S. Wong
Honbo Zhou wrote:
The SimpleCertAuthenticator example that does the client certificate
to
user
mapping doesn't seem to work. I followed the instructions and triedmany
times
without luck. Any comments? Like where to look for error messages?Thanks.
Honbo

Have anyone got the same message when remove certain package

error message, I do think the package has been removed but I got the annoying message:
[root@A fontconfig]# pacman -R gcalctool
removing gcalctool... var/lib/pacman/local/gcalctool-4.3.51-1/install: line 22: post_remove: command not found
done.
Or is it tied to my system, but I reinstalled my system that doesn't solve my problem with pacman, whose version is the lastest one, pacman-2.7.9-1.pkg.tar.gz.
Thanks in advance.

This means that the gcalctool uses older gcalctool.install file without post_remove function defined. See /var/abs/extra/gnome/gcalctool/gcalctool.install and compare it to /var/abs/install.proto (template)
AFAIR post_remove was introduced not so far ago. I don't think there is something to worry about (gcalctool uses only post_install and post_update and the rest is just empty or missing but pacman tries to find it so it displays error message).
If you want to know about it more read man makepkg.
EDIT: of course the package is properly removed.

Just got the Air. Is there something covering home button?

The button is really dark and shallow. It feels like there might be a piece of plastic material covering it, but I can't get hold of it.

The button is slightly concave, but shouldn't be depressed as the home button is on the iPhone5s, for example. The only piece of plastic covering your iPad out of the box covers the whole device, which you first remove. There is no plastic seperately covering the home button. You should google pictures of the Air for examples. If you suspect something is wrong in either form or function, take it back for a replacement.

Has anyone got DiskWarrior 4.2 - 4.3 to work w/ Snow Leopard?

My iMac is totally up to date and I've tried both DW 4.2 and 4.3 on it and it will NOT let me boot up from that DW disk. It's always the ownsership issue. I tried their tech 'help' person with no luck. He just tells me to not use a wireless keyboard and other stuff like download to a DVD, not a CD. I've spent easily 20 hours messing around with no luck.
I hold down the C key and it always just comes back to the regular desktop. Anyone got a sure-fire fix for this? I've read online that Snow Leopard just won't let DW work anymore. Worst of all, Apple blames THEM for the issue and DW blames Apple.

You have to have a valid Mac operating system on the external hard drive in order to boot from it. (By the way, holding the 'C' key forces the computer to boot from a system DVD disc if there's one in the optical drive. It has nothing to do with booting from a hard drive. Holding the 'Option' key will booting will bring up a menu showing all the valid system drives your computer knows about.)
Copying DW to the external drive isn't enough. You first need to put an OS on it. There are two methods: Use a program like CCC to copy (clone) your current drive) or use your restore disc to install the Mac OS on the external drive. Since your computer's drive is not well, I suggest the latter.
So get your system disc (probably the grey disc that came with the computer when it was new, or the Snow Leopard disc if you upgraded to SL after buying y our computer.) Insert the disc, restart the computer - and now hold the 'C' key until you see the grey Apple logo.
Check out this article on how to format an external hard drive. Then install the Mac OS on the drive.

Anyone got the AIR-CT2504-HA-K9 to work on N+1 Redundancy ?

Similar Messages

Maybe you are looking for