Anyone got their Audigy 2ZS working on Vista Beta

I tried just about everything,, including the NGO Modded drivers, the Vista Beta drivers provided by Creative, the original Win XP driver, NOTHING WORKED? any suggestions, i heard some people got theirs working..

you CAN get it to work, BUT ONLY on a 32 bit version..., just install ngo modded driver then or the original xp drivers (via device manager --> update drivers --> browse my pc --> cd rom dri've (with cd-rom from soundcard in it) then it should work but you get THE most desasterous sound ever (see new topic made by me)
i repeat, you can't let them work on a 64 bit edition!!

Similar Messages

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

Has anyone got PPTP VPN to work on Lion Server?

Has anyone got PPTP VPN to work on Lion Server?
I had a go with the terminal commnds posted by apple support but no joy. Since then Apple has pulled the suport article - is it because it didn't work?
I get PPTP is less secure but PPTP seems to be more reliable don't know whey they can't keep as GUI. I've got them both running on our 10.4 server and L2TP stoped allowing connections for no reason PPTP was still working L2TP started working again on its own. Plus L2TP drops my connection when I connect with a 2nd device e.g connected with my Macbook connect with my iPhone (different username) it drops my Macbook.
Any advice getting PPTP to work on Lion Server would be appreciated
Thanks
Ben

Hi,
I have posted a bugreport on this issue to Apple. Currently (10.7.2) it is not possible to run PPTP on any Mac OS X Server when using a 10.7 Server as Directory Server.
I have tried 'everything', but the MPPE encryption mechanism seems to be broken.
Edit: I see now that the bugreport is filed as a duplicate to an older case, which is now closed. I hope this means they have found the problem and will release a fix in the next update.

Anyone got Nokia Music to work with (recognise) N9...

Several times over the last months I have tried to get Nokia Music to work with my N95 8GB.
Every time I have spent hours and hours installing, upgrading, uninstalling etc etc but never success.
The Nokia Music PC software will not recognize my phone.
No matter what kind of connection i choose when i connect the phone - PCSuite, Mediaplayer etc, none of them makes the Nokia Music recognise the phone.
I am currently running Windows XP SP3, PC-suite 7.1.30.9, Nokia Music 1.3.20716.09, phone firmware is 31.0.015, phone code is 0550372
I am (_again_) dead tired of this, and for the moment (again) I truely hate Nokia PC software.
Has anyone got Nokia Music to work with N95 8GB?
Regards,
Njål
Solved!
Go to Solution.

Hi Njaale
Yes - it is working fine for me on a n95-
You need to connect your n95 in Media player mode.
You have 1.3.20716.09 but the latest version is - 1.3.2072
1) You can get the latest version from here - http://musicstore.nokia.com/download.aspx
2) If you are having licencing issue it could be because of the drm folder . If step one does not work try to delete the drm folder - C:\Documents and Settings\All Users\DRM . You need to make sure that hidden files and folders are not hidden and also that protected operating system files are not hidden.
To see hidden files:
1.
On the Tools menu in Windows Explorer, click Folder Options.
2.
Click the View tab.
3.
Under Hidden files and folders, click Show hidden files and folders.
Oh and just to be sure you are using nokia music
Here is a picture of it - http://www.slashphone.com/media/data/766/nokia_music.jpg
You can see in that picture on the left hand side is the phone you drag and drop your music into that phone picture to transfer your music.
Nokia pc suite below does not transfer nokia music
picutre - http://tltc.shu.edu/mobile/Nokia-PC-Suite_1.png
This is because the software in the first link (nokia music) is designed to recognise "DRM" software. But nokia PC suite in the second link does not currently do that.

Has anybody got their 808 to work on Consumer Cell...

Has anybody got their 808 to work on Consumer Cellular?
Consumer Cellular uses the AT&T network.
My phone works making or answering phone calls.
I can access the internet from Wi-Fi.
But I cannot access the internet from 3G.
Consumer Cellular emailed the settings to my phone.
I saved them and made them the default.
I re-booted my phone.
But I get “Connection failed. Connection unavailable.”

Have Consumer Cellular send you a configuration text message.
When you open the text message:
Your Pin Code is the last 4 digits of your phone number
select SAVE from Options
Set as Default Settings? Yes
Then:
Settings
Connectivity
Settings
Network Destinations
         (you can copy to another destination, change Priority, etc.)
Internet
   your home Wi-Fi
   ConsumerCellular
WAP Services
   your home Wi-Fi
   ConsumerCellular
If you see AT&T anywhere, delete it.
Moderator's notes: You can get the micro SIM card from your operator, it is not advisable to cut it yourself as it may not work or cause damage to the device.

Has anyone got OA Framework Tutorial working on R12 Jdev 10g?

I have successfully got the tutorial for OA Framework working on my Apps 11.5.10 install with very few problems.
I now have Apps R12 installed and have downloaded the correct Jdev 10g with OA Framework patch, but I am hitting some a number of errors. I can see that the tutorial code and documentation is the same as Jdev 9i, and has not been updated. Taking this in to account I am adapting the tutorial to the Jdev 10g, but I am hitting deployment problems in the local OC4J container, where AppsLogin is being requested and not found.
I therefore wonder whether anyone out there has got the tutorial to work in Jdev 10g?
I'm happy to try and figure it out for myself, but I would prefer to know that it is relatively straight forward to do.

Yes I'm getting the following error message:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SECURITY_APPL_LOGIN_FAILED.
I have seen this elsewhere on the forum but they all relate to Jdev 9 on 11.5.10. I wanted to know whether anyone else had got OA framework tutorial working on R12 because then I know from that one fact whether it is possible on the code that Oracle has released; any problems I encounter are then likely to be setup/installation/config issues that I should be able to resolve myself.
I'm surprised that no one has yet just given me a 'yes' given the number of experienced developers on the forum.
BTW, the full stack trace is:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SECURITY_APPL_LOGIN_FAILED. at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(Unknown Source) at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(Unknown Source) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source) at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source) at runregion.jspService(_runregion.java:136) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298) at java.lang.Thread.run(Thread.java:595)
Cheers
Andy

Has anyone got the B500 to work with Ubuntu? (nvidia driver problems)

In two weeks, I have been completely unable to get the nvidia driver working with the B500 on Linux. No matter what I try to do, the X server doesn't start, and my /var/log/Xorg.0.log file ends with "fatal server error: no screens found." I have tried feeding a custom modeline to xorg.conf, explicitly calling an EDID file which I extracted from the Windows installation, using the upstream nvidia driver installer, using the official repository driver, and probably a bunch of other stuff that I'm not recalling right now.
Versions I've tried this on:
Kubuntu 10.04, 32- and 64-bit
Ubuntu 10.04, 32-bit
Kubuntu 9.10, 32-and 64-bit
I am stumped. Has anyone successfully gotten this to work?
best,
-p.
Solved!
Go to Solution.

Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
Short version of the fix:
1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
2. Save the edid.bin file in /etc/X11 (or wherever you like)
3. Include the following in the device section of your xorg.conf:
"Option" "ConnectedMonitor" "DFP-0"
"Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
Fire up X and you're good to go.

Anyone got their uptodate redemption code yet? Did anyone get a code at an Apple store?

Has anyone received their uptodate code yet? Or can you get uptodate authorization at an Apple Store?

Ensure that you have an Internet Connection.
At the chime hold down Command-R and follow the recovery, to repair the Yosemite installation. Your data should still be intact.
A flashing question mark or globe appears when you start your Mac

Getting Zen to work on Vista Bet

OK...after all that it took to figure out how to be able to use my Zen player on Vista Beta 2, I thought I'd try and make the way easier for others.
Vista comes with an app called the "program compatability wizard", which is provided as a work-around for those programs which do not have nati've compatability with Vista. You can find this via the Help and Support window, on the first page. You'll need to use this to install/enable your zen-based player. In the case outlined below, the wizard will not have any down-sides once the software and drivers are installed...it simply seems to help direct the installer on where to install the drivers where locations are different that with XP, as well as to avoid errors via the setup picking up a OS incompatability....once installed software can be opened just like any other program in Vista
Open the compatability wizard and locate the install file (if you are using the original disc, then simply direct it to the disc dri've). Next select the compatability mode for XP. On the following page, you don't need to select any of the options - continue and check the box to run in "administration mode". From there run the install
Personally I would recommend only installing the Zen Explorer and Media Source - the other software is either available in a more updated version (Acrobat), or pre-installed in Vista (WMP). During install I recied one error when installing Media Source - ignore it and keep installing....after rebooting and registering, all works fine - including the explorer which I was doubtful would work in Vista.
As an extra, I would recommend checking on the creative site for any driver or software updates - also run these via the compatability wizard to be safe. The general rule being that the most recent versions of applications seem to work the best in Vista.
For those who want to use their player outside Media Source (or WMP), there is a plugin available for Winamp, which works well for both Vista and XP - it is important to note that not ALL Zen models are nati'vely supported in Winamp, so this can be a handy option.
Hope this help those, who like myself, have been running in circles trying to find the info they need Message Edited by crayolakidd on 06-22-2006 2:36 AM

The "Zen" model (20GB)- which was released here in Australia late last year. I previously had the Zen Touch (which I think this replaces), which I had updated to the latest "playsForSure" firmware - which I might add created one hell of a headache!! - but there is no such firmware update available for this model, only the original .00.02 firmware. I had tried to run via USB connection prior to figuring out how to install via the compatability wizard, but Vista was unable to install drivers and was unable to use via WMP without those drivers.
Below is the link showing the model in question
http://au.creative.com/products/product.asp?category=23&subcategory=24&product=59M essage Edited by crayolakidd on 06-22-2006 07:28 PM

Has anyone got BTCONNECT (POP) mail working on their Touch?

I have had my Touch for just over a week and all is well, except MAIL. I just can't get it to work with my BTCONNECT (POP) account..
I managed to get OUTGOING mails working.. But incoming is not working.. I get an error saying that it can't connect to my SMTP address. I have read a ton of posts from Google and tried everything, but its still not working...
My outgoing address is "smtp.btconnect.com", but I found a page from Apple themselves say that it should be "smtp.o2.co.uk", but this doesn't work.. To be honest, I don't see why it would, as this is a Touch not an iPhone (but the doc says that its for both), but I tried it never the less.
I did find one post from someone who had this problem and used iTunes to 'sync' his mail account.. I hoped this would work, but when i tried, nothing happened.. I even deleted my account from the Touch, selected my Outlook account under iTunes and did Sync. Whilst iTunes says its done it.. Nothing happens.
I should point out that for this test, I am at home, using the same connection that my Laptop (Which is able to send/recieve mail) is on.
I am starting to think I am wasting my time and just wondered if anyone in the UK has sucessfully got BTCONNECT mail working?
My fingers are crossed that someone can help
Jon

Just for continuity and incase anyone else has this problem, I have posted a solution here:
http://discussions.apple.com/messageview.jspa?messageID=9405022&stqc=true

Anyone got 5.1 surround working for games in OSX or Windows 7 on 2010 Mac P

I got mine earlier this month have been trying out games in bootcamp on windows 7 they work really well with amazing graphics but no 5.1 sound in either OSX or W7, through the onboard sound card. Has anyone managed to to do this. I have only tried via optical. I can not yet devise a way to get 5.1 from the ATI 5770 MDP has anyone tried this?

1. Run Windows Update like you would on any other PC.
2. Windows is Windows no matter how it's installed so it's susceptable to the same viruses you could get by running it on any other PC.
3. Both Parallels and Fusion can boot from an installation of Boot Camp. you don't nee to install Windows twice.

Has anyone got BTCONNET (POP) mail working?

I already posted this in the touch forum, but after doing a bit of searching, realised that there is a specific forum for 'mail' under the iPhone section, so I am posting it here instead.
I have had my Touch for just over a week and all is well, except MAIL. I just can't get it to work with my BTCONNECT (POP) account..
I managed to get OUTGOING mails working.. But incoming is not working.. I get an error saying that it can't connect to my SMTP address. I have read a ton of posts from Google and tried everything, but its still not working...
My outgoing address is "smtp.btconnect.com", but I found a page from Apple themselves say that it should be "smtp.o2.co.uk", but this doesn't work.. To be honest, I don't see why it would, as this is a Touch not an iPhone (but the doc says that its for both), but I tried it never the less.
I did find one post from someone who had this problem and used iTunes to 'sync' his mail account.. I hoped this would work, but when i tried, nothing happened.. I even deleted my account from the Touch, selected my Outlook account under iTunes and did Sync. Whilst iTunes says its done it.. Nothing happens.
I should point out that for this test, I am at home, using the same connection that my Laptop (Which is able to send/recieve mail) is on.
I am starting to think I am wasting my time and just wondered if anyone in the UK has sucessfully got BTCONNECT mail working?
My fingers are crossed that someone can help
Jon

Just a note to everyone to thank you for your help and let you know that I cracked it. I figured I should post, incase anyone comes looking for a solution (I just wished I had not spelt BTCONNECT, BTCONNET in the title).
I stumbled upon a post on another forum from a guy who claims to have it working and has helped others.. I got in contact with him and he has shown me what he has done. It looks like there is a quirk (I would call it a bug) in the way that the iPhone/Touch handles SMTP.
It turns out that for BTCONNECT (And I suspect others) to work, you need OTHER SMTP servers in the list.. Even if they are not right.. withouth them, it simply doens't work.. But as soon as you add 2 'others' it just magically works.
The best way to get BTCONNECT mail working is like this:
1. Disable Wifi
2. Delete existing accounts
3. Add new 'Other' account
4. Enter the following (Using a made up name as an example):
Name: Your Name
Address: [email protected]
Password: <Your Password>
5. Save
6. Select 'POP'
7. Add Incoming Server Details:
Host Name: pop3.btconnect.com
User Name: john.smith
Password: <Your Password>
8. Add Outgoing Server Details
Host Name: smtp.btconnect.com
User Name: Leave Optional
User Name: Leave Optional
9. Save
Now at this point, it goes off to verify SMTP info and will fail (not only becuase WiFi is off, but it fails even if Wifi is ON). You now get asked whether you want to try turning SSL on.. If you hit NO, it goes off and tries again and never finishes.. If you say YES it ends with an error.. But alteast you can save it.
The point is, just say YES and then you will get a option to Save.
10. Now you have saved, go back into your mail config and select the Primary Outgoing Server.. Here you want to change/verify:
SSL = OFF
Authenitication: Password
Port = 25
11. At this point it should work.. And I got here on my own many times and it doesn't.. What you need to do is adds some 'other SMTP servers'.
I was given the advice to add "mail.btinternet.com", but my conclusion is that it doens't matter... On mine, I now have 2 "other" addresses (both pointing to SMTP.BTCONNECT.COM).. If I go into them, they are wrong, as SSL = ON and worse, they are grey so I can't change them or delete them.
I got it in this state after a lot of playing, and I know its not right, but since mine is working, I am not changing it.
This is the area you want to focus on.. You need to get 1 x Primary Server (SMTP.BTCONNECT.COM) and 2 x 'other' Servers (Point them to SMTP.BTINTERNET.COM if you like).
I don't know why.. I don't know how but this works!!
If I write a mail and send it, it goes instantly.. So you know that its working straight away..
Oh yes.. Turn WiFi on NOW, before you test.. I forgot at one point and almost gave up again...
I know this sounds stupid and you would think that it doesn't make any difference, but it does.. Not only did this work for me, but its also worked for several other people I know who also had problems getting SMTP working.
Good luck and I hope this helps someone
Jon
Message was edited by: jweaver100

Has anyone got mental ray to work on qmaster?

I keep getting segment failed messages on some machines when i render mental ray it spends about half an hour rendering two tga frames which are only 4k and can't be opened, if i lower the resolution and set it only to do 10 frames it works, its got me flumuxed does anyone know is mental ray satellite any better. It works fine incidently if i render with software renderer. Incidently i know you have to put -r rm in the settings. but any ideas would be appreciated

ok got it to work easiest way is to make sure the shared drive is mounted on all machines and put all files i.e textures and mb file on there too and in the qmaster make sure you specify the working directory as the shared drive as well as the project directory

Has anyone got Push mail to work after migration t...

Has anybody sucessfully got Push mail working after migration from BT Yahoo mail to the new BT Mail server?
I'm still on the old BT Yahoo mail server and Push mail works fine on my iPhone
But people have told me that once migrated to the new BT Mail server, Push mail isn't available
BT tell me that it is, but there's a couple postings on the web saying Push mail won't work
So, my question is, is there somebody out there who who has been migrated to the new BT Mail server and who can confirm they can still get their @btinternet.com address post-migration to work as Push mail on their iPhone or ipad devices?

There is no push mail on BTMail. Once you have been migrated to BTMail you will need to have your devices fetch emails. There is apparently no plans to change this.

Has anyone got gma3650 or gma3600 working?

Hi,
I'm currently considering buying this netbook:
http://www.johnlewis.com/231577593/Product.aspx
It has the dreaded gma3650 chipset, which seems to cause lots of issues. I have found this on the wiki:
https://wiki.archlinux.org/index.php/Intel_gma3600
Just wanted to see if anyone else has got this working before I splash the cash.
Many thanks in advance.

My advice... stay away. Far away. Fbdev doesn't give you any acceleration whatsoever. There's the emgd driver, but if you'll get that one to work is a very big *if*.

Anyone got their Audigy 2ZS working on Vista Beta

Similar Messages

Maybe you are looking for