Anyone gotten their Aperture 2.0 serial number yet?

I ordered it this morning but still haven't gotten it yet. They seemed a little confused about what I was asking about when I tried to call Apple. Has anyone gotten their serial number yet?
(So far the upgrade looks good, just waiting to import the whole library and get started)

just be patient, get a good night sleep and you'll probably get the serial tomorrow.. then its play time..
just be off now, and make some photos! Aperture 2 tomorrow!

Similar Messages

  • HT5661 someone stole my ipod 4g & icloud cannot track my ipod because the ipod is off. if someone reformats it to their icloud, can my icloud still track it by my registered serial number, as their is inly one serial number for every device.

    someone stole my ipod 4g & icloud cannot track my ipod because the ipod is off. if someone reformats it to their icloud, can my icloud still track it by my registered serial number, as their is inly one serial number for every device.

    No. If they reformat, you can no longer track it.
    Allan

  • I have a case number but have not received my serial number yet after 4 days. Please help.

    I have a case number but have not received my serial number yet after 4 days. Please help.

    Do you know where I go to do contact Adobe directly, please?
    On Tue, May 5, 2015 at 11:06 AM, Barbara B. <[email protected]>

  • Aperture 2 lost serial number?

    I am in the middle of building a new macbook pro after a catastrophic failure of the previous hard drive.  I have been using Aperture since v2 and upgraded to 3.0 via a disc upgrade.  The original disc and serial number is missing and the current download won't register the upgrade serial number without the original.  Can anyone help to point me in the right direction for contacting the right support area at Apple, because I have made several attempts, but have had no luck so far in recovering the original codes.
    Thanks in advance,
    S.

    See Pro Application Replacement Serial Numbers
    Sales Support is pretty good at helping out. Their number is on the link, there should still be someone there

  • Aperture asks for serial number on each restart my mac

    Everytime I restart my macbook pro, Aperture asks me to enter my serial number. I first have to enter my serial number for Aperture 3 upgrade. And then I have to enter my serial number for Aperture 2. After that Aperture works fine until I restart the computer at which time Aperture again asks me to enter this information.
    Anyone know why it keeps doing this and why it can't remember my serial numbers? This problem has occurred ever since I moved over to the macbook pro 2011 and dragged my aperture icon over to my new computer.
    thanks for any help!

    I didn't use migration assistant (not even sure what that is). I basically copied over the aperture application from my old computer to my new comuter - set the settings to be the same, and copied over my aperture libraries as well. It launched fine once I entered my serial number - but keeps asking for it everytime I restart.
    I don't have the aperture disk anymore so if I want to restart - do I simply download the demo version and use my serial numbers? What files do I need to remove and how do I preserve my settings?
    thanks,
    Rishi

  • Moved to new Macbook Pro; Aperture 3 Upgrade Serial Number not Accepted

    I have just moved to a new MacBook Pro. I migrated Aperture 3 from my Macbook. This was originally an upgrade from Aperture 2.
    When opening Aperture 3 on the MacBook Pro I am asked for the serial number. I enter the upgrade serial number which is rejected.
    I am really struggling to find the Aperture 2 box and don't know whether that serial number would be the solution.
    Has anyone else come across this issue and know how it is resolved?
    Assume I will not be able to find the Aperture 2 box. Can Apple help given that I will have previously registered Aperture 2 and 3 in the past? I really don't want to have to splash out on another couple of hundred quid for a lost box.
    Please help.

    Red,
    Yes, assuming that you legally purchased the original version of Aperture from Apple, they will have the serial number on file. When you call they can provide you with the original serial number.

  • Aperture 2 install - serial number problem

    Disclaimer: I'm pretty good on a pc. Absolutely terrible on Mac, never had so many problems with tech :/
    So...I have my serial number from the back of the Aperture 2 "Installing your software" booklet. Checked that I'm entering "I's" not "1's." Got dashed between the sequences. Capslock on etc. Searched forum, quite a few posts on serial number problems. None matched.
    Enter serial number. Second window pops up stating I've entered an upgrade serial number (I only have the expired trial version of Aperture installed), and requesting my "serial number."
    I'm lost now. Checked my original docs, there's nothing on Aperture trial version. Fired up the trial and I see what looks like a license key (to Apple, not me) on the launch screen. That's not accepted by Aperture 2.
    Any thoughts on this appreciated.

    M_Austin wrote:
    Thanks, think you solved this Wish the label said something like that, the box only says Aperture 2, not upgrade license. So I'm guessing I have to pay $199, and keep this $99 package to upgrade it? I hope not. I'll ask at the store.
    There is a tiny label on the bottom edge of the box. Mine says "Aperture 2.0 Retail". The tiny label on my box for Final Cut Express 4 says "Final Cut Express 4.0 UPG". Does yours not say "UPG" on that little label? If not, you should be able to return it for the full version (plus pay the difference, of course). If it does say "UPG" you might be out of luck as most open software can't be returned.

  • Aperture requires the serial number each time

    I transferred all the data and apps from my old 24" iMac to my new 27". Now every time I start Aperture, it demands that I input the serial number again.

    Pro Applications do not migrate well. The first thing to try would be to reinstall Aperture; then it should suffice to enter the serial number once more, from and administrator account.
    You may have migrated an old ProAppSystemID file, that needs removing, check, if you still have an old file "ProAppsSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see ProAppsSystemID there, move it to its proper location in /Library/Application Support/ProApps.
    Aperture must be running, and you will have to wait a few minutes to be seeing the file appearing the /tmp directory.
    Regards
    Léonie

  • Aperture not recognizing serial number

    I went to the Apple Genius bar for help today and they wiped everything off and restored my OS.  I am now trying to put the Aperture software on that I bought 2 years ago, and it's saying the serial number is not valid.  What do I do?
    Thanks

    There has just an update been released, Aperture 3.4.3, that is supposed to fix serial number issues, try if updating helps.
    Is your Aperture version an upgrade from Aperture 2? Then you need to enter both serial numbers.
    And checck the correct typing - sometimes letters can be confused, the letters in the serial numbers are all upper case, see Troubleshooting Professional Application Serial Numbers and see if that helps.
    If all fails, contact Apple for an
    Pro Application Replacement Serial Numbers . You will need to provide a proof of purchase.
    Regards
    Léonie

  • Sold Aperture 2 - but 'serial number invalid'

    Hi there, please help
    I bought Aperture 2 many months ago, but found it wouldn't work on my Powerbook G4. I then switched to Adobe Lightroom, and put the Aperture software in the cupboard.
    I've just sold the software, but the new user gets the error message, 'serial number invalid'. It's possible I entered the serial number (can't remember), but the software itself was never used. How do I get the software to work for someone else?
    Many thanks for any help.

    If the serial number is valid it wouldn't care if it had been entered before or if it had been on a different computer. Is this a boxed set? It wasn't an upgrade was it? Do you still have the original serial number sticker?
    Either the serial number you gave to the new owner is wrong or else they are entering it wrong unless the software you have was an upgrade in which case you also need the original serial number.
    If you don't have the correct original number the only ones who can help are Apple.

  • How do I reinstall Aperture with only serial number?

    I had to have a new hard drive installed and due to software corruption on my old drive I had to erase any software.  My photo library was in Aperture and I can not access any of my images.  I upgraded from a free trial and only have a serial number for version 3.2.4.  How do I reinstall Aperture without having to repurchase the download?  Thank you for any advice!

    Try if this download link for the trial version still works: if yes, you can install Aperture 3 from this link, then unlock it with your serial number:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    Then use software update to upgrade to 3.3.
    Keep a copy of the Trial installer, just in case you ever need to reinstall.
    Regards
    Léonie

  • Aperture asks for serial number

    I upgraded to 3.4.5 a while ago and EVERY time my system reboots I need to type in my serial number for Aperture...this is very annoying.  Does anybody have an easy fix for this?
    Thanks,

    it is unusual, that this happens after an update of Aperture - typically we are seeing this problem after migrating Aperture from a different Mac.
    Are you entering the serial number from an administrator account? If not, try to sign into an admin account to enter the serial number. Aperture seems to have problems to write the serial number to the system library. If it forgets the registration key, when you shut down the system, the registration code is probably written to a temporary directory and erased when rebooting.
    Look at the temporary directory /tmp:
    Use the Finder's "Go" menu
         Go >  Go to folder    and  enter /tmp into the textfield. If you see a file ProAppsSystemID there, move it to its proper location in /Library/Application Support/ProApps.
    Aperture must be running, and you will have to wait a few minutes to be seeing the file appearing the /tmp directory.
    -- Léonie

  • Aperture asking for serial number

    Aperture keeps prompting for a serial number when I open it.  I saw this listed as a bug fix in software updates on the ap store, but my software is up to date.  How do I even find my serial number since I downloaded it from the ap store?  Also, in the future, how do I uninstall an ap?  Thanks so much for your help.
    Jill

    When and how did this start? After you made an update? Did you update from the App Store or download an installer from the support page?
    How do I even find my serial number since I downloaded it from the ap store?
    Jill, Aperture from the App Store does not have a serial number. If it is asking for one, your installation is buggy.
    I'd recommend to reinstall Aperture from the AppStore.
    Back up your computer, if you do not have a current backup.
    Remove the Aperture application from the "Applications" folder to the Trash.
    Sign into the AppStore and go to the "Purchased" tab. Download Aperture again and let it install.
    Does it work now?
    Also, in the future, how do I uninstall an ap? 
    That depend on the application. Applications, that are coming with an installer, usually also have an uninstaller. Use that to uninstall.
    Other Applications, that you install by dragging them to the Applications folder, can be uninstalled by simply deleting them.
    The documentation of each app should tell you, where the data reside, that also need to be uninstalled.
    Regards
    Léonie

  • HT1349 I don't have a MAC, I have an HP pavilion a706n so I don't know what the serial number is. The HP serial number was accepted and neither was my itunes serial number. Does anyone know where to find the serial number?

    I am trying to find the serial number that is required by itunes for troubleshooting. But the trouble is, I don't know what it is.
    My computer is a HP (not a MAC). I have the itunes serial number. Before loosing my almost 5000 songs I was using an
    older version of itunes. I thought if I upgraded to the new version that I would get my itunes back. When I noticed the songs
    were gone was when I was taking saved items from my documents into a new 500G hard drive I bought yesterday. After
    loading a bunch of stuff it (not any itunes) I went into itunes and ALL of my songs were gone. What happened? What should
    I do? & Where is that serial number they are talking about?

    Hi Susan,
    Not sure why your post ended up in the Apple Server section but here goes.
    By default your music should be located in one of the following locations
    which you can see by clicking on My Computer
    Windows XP - C:\ - Documents & Settings - Username (your name or your login name) - My Music - iTunes
    Windows Vista/7 - C:\ - Users - Username - My Music - iTunes
    it's unlikely your music has been wiped and more likely that iTunes can't find the library file that tells it what music is in your collection and where it's located. This can happen if you renamed or moved one of the folders above to something/somewhere else. Another idea is to do a search and look for files in a format used by iTunes such as .mp3 or .aac which might show you where they are.
    Hope that helps
    Beatle

  • Has anyone gotten their monthly dukes???

    Hi,
    I love to give out dukes!! I wish i had more of 'em.
    So i have kept an eye on my account, waiting to see
    that "monthly" refresher.
    Is anyone getting their monthly dukes? Is this a practice they have stopped, but forgot to update their dukes bullitin board? Its like waiting for Christmas & Christmas never comes : (
    Maybe i've been a bad girl.

    gseel: i think you EARNED those duke dollars... i dont think my code was exactly easy to follow & i sincerely appreciated the help.
    Esoral: the link was good, but it seems there is something not quite right here... the BB regarding dukes says that once a month we get dukes... seems to me im not the onlyone who is missing a few dukes,among other things ; )
    I did write to the webMaster over a week ago... still no response other than "forwarded it to the appropriate person"...

Maybe you are looking for

  • Re: how much would it be to cancel my plan 10 months before it ends?

        Thank you Ann154 for assisting casey.ann! The information that you provided is very helpful. casey.ann, we would hate to lose you. Send me a private message with your name and mobile number. I would like to review your account and to assist you w

  • System variable issue on outgoing payment

    Hi, I encounter the error "Printing Error:Invalid variable number (RPT -6300) (Field: F_397) Variable '202'  [Message 200-38]" on my outgoing payment. This only happen when i select "Account" option, for "vendor" or "customer" option is fine. This is

  • Where do I get Solaris 8 Intel based for FREE???

    Hey guys the download site for Solaris 8 Intel based is gone. Any idea if there are any other places I can download them.

  • Apply 1 color palette to 40 AI files, at once...?

    I have built 40 charts, using PMS colors. Now I have to convert all these charts to CMYK. I have a color pallete saved, as a separate doc., and I can pull it in through the library. Is there a way to do this swatch change globally? Swatches names sta

  • How to apply a gradiant to a photoshop image?

    How do I apply a gradiant to a photoshop image? I have tried looking at a number of online blogs and instructions but they were the wrong version -- or they assumed too much knowledge that I did not have and thus stepped over some steps. I am using P