Anyone has a solution for the problem: typing keywords and suddenly it does not work anymore. Mostly I have to restart my iphone 4Gs
Does anyone has a solution for this problem?
Since I updated to iOS 6 sometimes my keywords did not work.
I always have to restart my iPhone to have it work.
It's ridiculous to always restart my phone.
If you also have this problem you can repost + give some tips.
Thanks and greetings,
Max Louis
Hi Alo816,
I'm sorry to hear you are having such extensive issues with Messages on your iPhone. If you continue having issues sending or receiving Messages, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages - Apple Support
If you continue to have issues with Messages after that troubleshooting, especially if it is still having or crashing, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPhone to factory settings and testing it in that default condition to see if the issues persist before restoring your data. You may find this article useful:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
- Brenden
Similar Messages
-
i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS
Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck! -
For the 10^6 time -- JMF on Fedora does not work!
I've tried everything under the Sun (no pun intended), and I've seen many other people with this same problem, but no solution...
(1) I installed the performance pack version of JMF 2.1.1 for Linux.
(2) I modified my .bash_profile to read as follows...
PATH=/usr/java/j2re1.4.2_06/bin:$PATH
export PATH
JAVA_HOME=/usr/java/j2re1.4.2_06
export JAVA_HOME
JMFHOME=/usr/java/JMF-2.1.1e
CLASSPATH=$JMFHOME/lib/jmf.jar:.:${CLASSPATH}
export JMFHOME CLASSPATH
LD_LIBRARY_PATH=$JMFHOME/lib:${LD_LIBRARY_PATH}
(3) Just to beat a dead horse, I even copied-pasted the following:
/JMF-2.1.1e/lib/*.jar --> /usr/java/j2re1.4.2_06/lib/ext/
/JMF-2.1.1e/lib/*.so --> /usr/java/j2re1.4.2_06/lib/i386/
both *.jar and *.so --> /usr/mozilla/plugins/
(4) But when I try running the online diagnostic applet
http://java.sun.com/products/java-media/jmf/2.1.1/jmfdiagnostics.html
I get the following:
Java 1.1 compliant browser.....Maybe
JMF classes.....Not Found
and none of the sample JMF apps on the Sun website work.
Any clues at all??? Does JMF not work on Fedora???
I guess I'll just keep asking this question every few days until someone from Sun answers?
Thanks anyways...Yes, I didn't make that clear (first thing in the morning). Even though the JMF Diagnostic applet doesn't work for me on RedHat 9.0 using the Java Plugin with JDK 1.4.2, JMF DOES work for me from the command line. It seems that the Java 1.4.2 Plugin isn't finding JMF on the path. For me, the Java 1.5 Plugin resolves this issue.
Scott -
This problem started to occur after having done an update for my iPhone. All help is appreciated! Thank you!
Hi guys,
@cor-el: getting rid of not needed parts is what I always do. Besides prefs and localstore, only the search-metadata and permissions / signons are passed along. Oh, forgot to mention the mimetypes.
No, my point is why is FF looking for those folders when there's no mentioning of these to be found in my options? Not even in de about:config ... When I state C:\ as my downloads location it's absurd to check any other folder first, which FF seems to do before giving me an explorer window showing .. C:\ as a starting point. Like my unrestricted laptop does.
@jscher2000: Even if there are pointers to those default folders, FF should not be checking those. When I state C: I mean C: (see my answer above).
No, I'm convinced this is a bug unless someone knows a way to stop that folder checking. And to be honest, the not working Browse button is the least of my problems (I use: ask everytime where). No it's the saving that is the problem. But I guess the underlying problem is the same. Saving / downloading, what's in a name ..
Guys, thanks for your help ! I can't fix a bug so I'm going to let it be. I'll rebuild my master and will keep checking of saving a website becomes a problem somewhere. Mind you, the solutions offered in kb.mozillazine.org/Unable_to_save_or_download_files didn't work.
Oh well, I'll keep my fingers crossed :) -
Since update of iOS7.0.2 my calendar has been problematic by not accepting new data (appointments) intermitingly. The first time I turned off the phone and restarted which then accepted the new data for an event. Worked fine a few days the would not again accept new data. The on/off fix does not now work. Went online with Apple support, went through an online dianogistic which after the calendar function worked. Today it again will not take new data. One good thing is once the data is visible in Calendar it stays.
SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
Using F1 to access the online help in Visual Studio 2013 does not work anymore! Any help available?
Hi,
since some days I get the following message after pressing F1 in VS2013 to access the online help:
Any help to solve this available?
Kind regards,
Martin
Martin Lemburg Berlin / Germany Martin0815@twitter martinlemburg@facebook http://about.me/Martin0815Hello Martin,
could you try clearing you browser cache like indicated here:
[1] http://blog.mischel.com/2011/09/13/cant-get-help/
If this does not help, please try changing your default browser to find out where the problem is located.
Regards,
David Schneider
Developer-Hotline for MSDN Online Germany
Disclaimer:
Please take into consideration, that further inquiries cannot or will be answered with delay.
For further information please contact us per telephone through the MSDN-Entwickler-Hotline:
http://www.msdn-online.de/Hotline
For this post by the MSDN-Entwickler-Hotline the following terms and conditions apply:
Trademarks,
Privacy
as well as the separate
terms of use for the MSDN-Entwickler-Hotline. -
It's version 3.6.12. Anyone else having this problem?
You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
LN -
what should i do? i askedone of the. site support centre, they said it should work with some funny other things . talking about the contents of there sites which could work fine on ordinary windows environoment disktops
We don't have a relationship with Puffin Browser, but it is the only viable option for Flash on iOS and Android that I'm aware of at the moment.
You'll need to work this out with the folks at Puffin. -
The copy, copy image and save as does not work for pictures in release 10.0.2. saves blanks.
just put release 10.0.2 up at work and it was automatically put up at home and it won't copy pictures using copy or save as.
'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
MY back camera and flash stopped working it just stopped out of nowhere I reset everything and it still does not work what do I do it's an iphone 5c
Backup and then restore as new and see if it works or not.
-
Standard shortcut for "flow" does not work anymore
Hi there :-)
The standard shortcut for setting the flow of a brush or stamp does not work anymore. When using shift + 0-9 nothing happens. It works correctly for the opacity when I use 0-9.
When I turn on the airbrush-mode it's not switching the commands entirely... Flow is still not settable with 0-9 but opacity cannot be set either by shift + 0-9.
I can access the opacity by hitting "enter" and then use the tab to switch to the flow but that's not what I wanna do.
Can anyone help my to find out what happened to These commands? The Shift-keys work fine btw... I'm using them for other commands (in and outside of PS) .
If anyone knows how to change these standard hotkeys let me know as well.
Thnx, MichelleWhich version of photoshop and operating system are you using?
-
The raise to speak feature on Siri does not work
The raise to speak feature on Siri does not work anymore is there any possible fixes for this
I had the same problem (iPhone 5), but the fix was simple.
Turn off your Bluetooth. Yeah, I know this sounds crazy. Here's why.
When you use Siri with the "Raise to Speak" feature activated (Settings/General/Siri), this enables the proximity sensor that lets the iPhone know it is near your ear, activates Siri, and turns off the display.
However, if you are using a bluetooth headset (like I do), then this sensor is turned off automatically, because you will be speaking thru your bluetooth and not the iPhone to activate Siri and make calls.
To prove this, do the following test.
Make sure "Siri" is on, and "Raise to Speak" is on (Settings/General/Siri).
Turn off your Bluetooth (Settings/Bluetooth).
(TEST) Hold your phone in front of you, and with a natural motion, bring the phone to your ear (as if you are answering a call). Siri will automatically activate, assuming you want to ask it/her a question (very cool feature). And the screen will turn offautomatically.
If you have never used the "Raise to Speak" feature, this feature automatically activates Siri when you raise the phone to your ear (really a cool and helpful feature). It may take a little practice to get used to this. I struggled at first, but soon got the hang of using a natural motion to bring the phone to my ear. Starting with the phone in front of you, the phone should be "almost" parallel to the ground when it gets to your ear. It may take several practice tries to get it, but you will get it, and you will be hooked on this neat little feature.
Ok, with this done, this proves your proximity sensor is funtioning properly.
Now, turn on your Bluetooth (Settings/Bluetooth).
And repeat the same (TEST) above.
This time, Siri should not activate, and the screen should not go off. Why? This is because your voice communications with callers (and Siri), are now going thru your Bluetooth, and not the phone handset. Because of this, their is no need for the proximity sensor, so it is automatically turned off (when Bluetooth is on).
I can only speak for me and my situation, and what worked for me. However, their may be other issues regarding the proximity sensor separate of this that I am not aware of.
I hope this helps you.
Man I love the "Raise to Speak" feature, you will too.
God Bless You All. -
Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.
Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.
-
For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???
I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.
-
We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details manually.
I have done resets on off and nothing? HELP!What is that and how. I have 3 airports all configured identically and connected to one router via ethernet!
A power cycle is powering down for ~ 1 minute and powering back up.
Maybe you are looking for
-
Firefox wont open, because of multiple copies? !
I uninstalled and reinstalled Firefox. Now when i open the new firefox i get an error message: "Close Firefox. A copy of firefox is already open. Only one copy of Firefox can be open at a time." Ive uninstalled again, empied the trash, searched the c
-
A thin blue line has appeared on my ipod
I have a new ipod touch 1 month old and a thin blue line has appeared on screen right down the middle. how do I get rid of this?
-
My mac is trying to download security software, do I need it?
I am a new mac user. My mac started downloading security saying it was necessary to remove whatever I had been infected with. I stopped the download. I bought a mac because I was told I did not need to worry about security. Do I need security? Is th
-
How can i execute multiple database operations using multiple objects
i have data in files which i need to read/parse and insert/update the database. can someone tell me how can i read multiple statements at a time and process using multiple objects.
-
Clocking wizzard throws error while instantiating in IPI
Dear community, I am using the ZedBoard without the PS side. My Goal is to create a 50MHz clock for my logic. So I use the 100MHz PL clock (the ZedBoard provides a 100MHz clock at Zynq pin Y9). To get the 50MHz I am trying to use a MMCM which I would