Anyone has an instrument driver for Agilent E8364 50GHz PNA

Does anyone have a working instrument driver for the E8364 50GHz PNA? I am currently tryin to use the agpna instrument driver downloaded from NI but i am having errors. The PNA balks that the "query is unterminated" and then the VI times out. Please let me know if you have a working instrument driver.

Is this the driver you are downloading?
If so,
- Are you running the Getting Started VI to test communication?
- Did the ID query pass?
- Make sure you have VISA 2.6 or later installed.
- Try running NI-spy with with the Log to File option enabled and post the spy capture.
NI Spy Tutorial

Similar Messages

  • Instrument driver for agilent 8960 to run CDMA tests

    Hi, just wonder if there is an instrument driver for agilent 8960 to run CDMA tests? I know 8960 has E1963 and E1968 driver, but 1963 is designed for W-CDMA and 1968 is for GSM/GPRS/EGPRS. So is there a driver designed for CDMA mode? Thanks a lot!
    Solved!
    Go to Solution.

    Unfortunately, it does not appear that there currently is one.  When I search the Instrument Driver Network I only find the two drivers that you pointed out.
    Brandon Treece
    Applications Engineer
    National Instruments

  • Instrument driver for Agilent E5061A network analyzer

    Is there a instrument driver for the Agilent E5061A network analyzer ? I couldn't find one neither on NIs Instrument Driver Network nor on Agilents site.
    We are using Labwindows/CVI as development system.

    Yes we are talking about the same driver, but i dont know why hp871x.c file was removed. However, hp871x.h and hp871x.fp are included.
    Anyhow, look this comment into hp871x.cpp file:
    In addition, if WIN32 is defined, _CVI_ may also be defined to indicate that the program is being compiled under LabWindows CVI.....
    I guess it is not so hard to modify this source code (from hp871x.cpp to hp871x.c). Sorry for disturb you!!!
    "Only a life lived in the service to others is worth living..." - Albert Einstein

  • Is any one has the instrument driver for APD-Vp series servo motor(manufacture is Metronix in korea) for labView7.1?

    Please help me.
    Thanks

    Hong Zhang,
    The Instrument Driver Group gathers requests and may or may not come out with particular drivers based on demand.
    We have some excellent online tutorials that should help you out:
    http://www.ni.com/devzone/idnet/ is a must starting point for tips/information on developing your own driver. The following site specifically talks about LabVIEW instrument drivers:
    http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&64325190560C97CE86256E4A006F27F1
    If you have any specific questions feel free to post back and we'll see what we can do!
    (also have you contacted the instrument manufacturer to see if they have one or would be willing to develop one?)
    Craig H.
    NI Applications Engineering

  • Instrument driver for Anritsu-MS2683A

    Hello,
    I am new to LabView. Does anyone has the Instrument driver for Anritsu-MS2783A( spectrum analyzer).
    I am having a hard time to get it.
    Thanks,

    Ok. Seemingly, instrument driver for that model is not updated. As u can see only available driver is for MS2602A, which has been released in 1995. If there is no big difference between 2 models, i assume that u can use the driver of MS2602A. At least, it should be same for main features, but it is labwindows/CVi type. U might ask the venter which one of the NI certified drivers is suitable for ur instrument.

  • Has anyone found the correct driver for Canon MF4018 printer?

    I have tried installing all of the available drivers including MF4010 which other users have reported works- I keep getting Error-50 and cannot print anything. If anyone has used any driver for this printer that is compatible with my macbook pro - that could help me out a lot.

    Since it's a 10.8 issue, why not place a new post in the 10.8 usage forum?
    DALE

  • Looking for instrument driver for HP3561A (Using LabView6.1)

    Hello,
    Is there anyone out there has the instrument driver for HP3561A. I know there is one available in the ni.com/idnet however, that one runs only on a higher version. Can someone tell me is there any other options?
    Regards,
    Daniel

    Look again. There are 6.0 and 7.0 versions available for download.

  • Instrument Driver for Advantest R6243/6244

    Has anyone developed the instrument driver for Advantest R6243/6244 and willing to share the driver? Thanks!

    Hi Rebecca,
    There are several drivers for other Advantest products in NI's Instrument Driver Network, however I didn't find any driver that specifically matched the R6243/6244 voltage/current generator, and I didn't find anything on Advantest's site that could point me to a quick solution for you. Unless another user has developed a driver that they could give you the code for, it looks like your best bet from this point is going to be to request a driver, if you haven't already. You can do this by going to the Instrument Driver Network, and following the link to "Request Drivers". Hopefully this helps you on your way. Good luck!
    Logan S.

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • Looking for Labview driver for Agilent 4294A (HP)

    Help!
    I've been browsing the driver database looking for the Labview GPIB driver
    for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
    Does anyone know where I can get it?

    Hello all,
    NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
    Jason Hobbs
    Instrument Drivers

  • Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

    I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

    Hi,
    There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
    Multi-Environment Certified IVI Instrument Driver
    Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
    The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
    Try LabVIEW 7.1 FREE Online
    If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
    -John M

  • Looking for Keyence Instrument driver for LV.

    Looking for instrument driver for LV developed for the Keyence LS-7500 series micrometer. Has anything seen any or done this already? Any help would be greatly appreciated. BTW I have already checked NI's listing of instrument drivers to no success.

    Hello-
    There are no drivers listed for this instrument at http://ni.com/idnet. You may want to contact Programmed Test Sources to see if they have a LabVIEW driver for their instrument. If they don't, you can easily create a low-level driver by configuring an I/O assistant VI for each function in the manual. Once you have this low level driver you can just combine functions to make higher level VIs. Alternatively, you can hire an Alliance Member to write an driver for you.
    Alliance Member Directory
    http://www.ni.com/alliance/alliance_member.htm

  • HP 54501A - Instrument Driver for LabView v.7 or v.8

    Hi all,
    I'm looking for HP 54501A - Instrument Driver for LabView v.7 or v.8. I have NI gpib/usb controller installed, but cannot control the scope via Labveiw.
    The link I found at NI web site within drivers section seems to be broken so I couldn't download it!
    Please, anyone, suggest/help!

    The link you were given works for me. You can try it again. The given link brings you to a page where the CVI and LabVIEW drivers are listed. the direct link to the LabVIW driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9455659CE034080020E748... .

  • Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

    I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
    Does anyone have one?
    Thanks,
    Avner

    Hello,
    It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
    Thank you,
    JLS
    Best,
    JLS
    Sixclear

  • Need an Instrument Drive for Elmo motion control products.

    Hello,
    I am going to use a Bassoon servo drive from Elmo Motion Control to control a voice coil.  I  haven't found an Instrument Driver for Elmo through my LavVIEW program or on their website.  Does an Instrument Drive for Elmo products exist? 
    Thank You!

    Hello JMJ,
    Here are my answers to your questions:
    1.  Is it possible for me to communicate with the Basic Serial Read
    and Write example and not develop an Instrument Drive?  I see that the
    write VISA VI takes a string and converts it and sends it to the
    control card and the read VI receives a signal and converts it.  Is the
    conversion converting from the Elmo language to the ASCII code?  If I
    don't write an Instrument Drive will I have limited capabilities?You could use the serial example to write your entire program.  If you only need a handfull of commands, then this is probably the most straighforward for you to get going.  Everytime you use the VISA Write, the ascii values are written on the serial lines and transmitted to your device.  Your device reads and interprets these commands and acts depending on what the command is.  Some command may change a setting in the instrument.  Some other command may actually ask for the instrument to write back some data.  In this case, you need to have a VISA Read after the write to be able to read the data into your computer.
    2.  I was informed that there is an Instrument I/O Wizard that would
    potentially be easier to use and program than an Instrument
    Drive.  What is your opinion on such matter?  Could I use either or
    neither?You can definitely use the Instrument I/O Wizard to help you .  This wizard really helps in parsing the data  received from your instrument.  You can look this tutorial if you want to learn more about  it.   You could use either one.  I suggest you try both these methods and see which one seems more obvious to you. 
    3.  If I develope an Instrument Drive are all the seperate commands seperate subVIs?    
    A LabVIEW instrument driver usually has a set of VIs with specific functionality.  For example, you will have one subVI that will initializes the instrument.  This subVI may send 1 to 5 (or more) commands, depending on what you need to initialize your instrument.  You can then have one VI that set's an attritube.  This one would only require sending one command.   You can look at this tutorial for developping a complete instrument driver.  However, keep in mind that this may not me necessary for your application.
    I suggest you first look at what functionality you need.  Then take a look at what commands this will require.  You will then be able to plan out your program a little better.  I also suggest you post all this information on the forum, so that we may be able to help you with more specific details.
    Have a great day.
    O. Proulx
    National Instruments
    www.ni.com/support

Maybe you are looking for