Anyone has any problem after updating to iSO 4.3.1 ?
anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.
My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.
Similar Messages
-
Is anyone else having trouble after thy downloaded Mountain lion x with iMessages mine isnt linking to my computer because it keeps saying i have a registration error. Has anyone else had this problem or know how to fix it
HI,
People who have had computer that has had the Logic/motherboard replaced during repair or refurbishment that has not has the Mac Serial Number Flashed to the board have found that iMessage in particular have not been able to "register".
A current purchase of Mountain Lion will tend to give you the latest version which as of Thursday (12 th Mar) is OS X 10.8.3
You can use System Information to find if the Serial Number is there as it appears under the Hardware section.
If it is missing you need to get to an Apple Store or Apple Authorised Service Provider who can flash the info to the board.
10:46 PM Saturday; March 16, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?
THIS is "quite a few": https://discussions.apple.com/thread/3391947
As are these:
https://discussions.apple.com/thread/3391947?tstart=0
https://discussions.apple.com/thread/3484755?tstart=0
https://discussions.apple.com/thread/3481668?tstart=0
https://discussions.apple.com/thread/3518760?tstart=0
https://discussions.apple.com/thread/2755090?tstart=0
https://discussions.apple.com/thread/3507356?tstart=30
https://discussions.apple.com/thread/3482083?tstart=60
https://discussions.apple.com/thread/3492588?tstart=60
https://discussions.apple.com/thread/3397244?tstart=90
And older ones:
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update
As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution. -
HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?
Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'
Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork -
I have already update to iOS 6.1 on my iPhone 4. I have a problem to sync with the iTunes. I cannot backup, sync or transfer purchases from the iTunes. I can only restore the backup. Anyone has any idea how to solve this problem?
also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem
-
Has anyone had any problems with their charger blowing out?
Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires
-
Has anyone had any problems with the latest upgrade for iPad?
I have an iPad 1 and am being prompted to upgrade to the latest version software. Has anyone had any problems when doing this? Our PC runs on Wndows 7.
Having just resolved iTunes not connecting to the store after the recent upgrade, I'm reluctant to do something that could potentially screw up the iPad which does what we want as it is.bobtheblob wrote:
Ok, thanks for that. I'll hang fire for the moment & see if anyone else has any comments.
That's probably a good idea. If you are happy with the system as is, I'd wait to upgrade. I can report that my friends and family have mostly upgraded to iOS 5 without any problems, but as you can probably tell from other posts on this board, lots of people have run into problems.
As the old saying goes, if it ain't broke, don't fix it! -
Has anyone have any problems with 5s "sticking"?
Has anyone had any problems with the 5s iPhone "sticking"? It's happened to me twice where I press the home button, and nothing happens.
Yes. Very sticky. especially the first time you go to click it after not using it for a bit. Mine feels similar to if there were crumbs underneath, or parts crunching together.
I just got off phone with Apple. I thought it was my imagination and being too sensitive until just now seeing other posts having same complaint. Apple rep on phone said it was not normal and for me to get it swapped out. -
Has anyone lost their Facebook after updating to a newer version on their iPhone?
Has anyone lost their Facebook after updating to a newer version on their iPhone? After updating I was emailed and told to go back to the old version and now my Facebook account is gone. Anyone know what's going on?
No problems here but you can re download the FB app from the App Store right on your iPhone.
-
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
I'm looking at buying a new computer. Has anyone had any problems with fusion drive on iMac? If so, what kind of problems, and were they easily corrected?
NOPE!
I better not! My iMac is only a week old. And, if I did have any problems with it, I would let Apple deal w/it! I do not troubleshoot when I'm under warranty. That's Apple job! -
Home button not working after installed ios5! Anyone has such problem?
Just installed ios5 and found home button doesn't work. Anyone has such problem and resolution?
1.Unlock it, open an application and hold down the Lock / Power slider appears on the screen until the closing device.
2.Take a handful of Lock button, lightly press the Home button and hold it down for 5-10 seconds until the menu disappears and the display shows that the Springboard.
3.This technique is a recalibration of the Home button and after they make everything should work normally without problems. -
[SOLVED] charging + touchpad problem after update
*******EDIT*******
after trying some other live cds, the problems below are almost certainly hardware related, with timing of update coincidental.
hi all,
I have a Asus UX32VD. I was travelling for a few weeks and updated when I got home, including the kernel to 3.10.44
now the battery stops charging around 50% (tried two chargers at two different locations)
$ acpi -i
Battery 0: Charging, 48%, charging at zero rate - will never fully charge.
Battery 0: design capacity 5863 mAh, last full capacity 4920 mAh = 83%
also the touchpad stopped working entirely (was not recognized in 'xinput list') but after some searching I blacklisted i2c-hid, which seems to have helped, but the touchpad still sometimes becomes unresponsive (especially when unplugging/plugging in power) and leaves the following in the journal:
Jun 29 11:04:31 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:33 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:33 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:33 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:33 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:33 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:33 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:33 maria kernel: psmouse serio4: issuing reconnect request
Jun 29 11:04:47 maria kernel: psmouse serio4: bad data from KBC - bad parity
Jun 29 11:04:47 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:47 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:47 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:47 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:47 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:47 maria kernel: psmouse serio4: issuing reconnect request
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - bad parity
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - bad parity
Jun 29 11:04:48 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:48 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:48 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - bad parity
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - bad parity
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - bad parity
Jun 29 11:04:48 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:04:48 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:48 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:04:48 maria kernel: psmouse serio4: issuing reconnect request
Jun 29 11:04:48 maria kernel: psmouse serio4: elantech: synaptics_send_cmd query 0x01 failed.
Jun 29 11:04:49 maria kernel: psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Jun 29 11:04:50 maria kernel: psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f02)
Jun 29 11:04:50 maria kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
Jun 29 11:04:50 maria kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input14
Jun 29 11:04:50 maria kernel: psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Jun 29 11:04:50 maria kernel: psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f02)
Jun 29 11:04:50 maria kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
Jun 29 11:04:50 maria kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
Jun 29 11:04:51 maria laptop-mode[10540]: Laptop mode
Jun 29 11:04:51 maria laptop-mode[10541]: enabled, active
Jun 29 11:04:52 maria kernel: EXT4-fs (sda3): re-mounted. Opts: (null)
Jun 29 11:04:52 maria kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
Jun 29 11:04:52 maria kernel: EXT4-fs (sda4): re-mounted. Opts: (null)
Jun 29 11:04:53 maria laptop-mode[11341]: Laptop mode
Jun 29 11:04:53 maria laptop-mode[11342]: enabled, active [unchanged]
Jun 29 11:05:11 maria sudo[11348]: adlai : TTY=pts/1 ; PWD=/home/adlai ; USER=root ; COMMAND=/usr/bin/journalctl -f -n 55
Jun 29 11:05:11 maria sudo[11348]: pam_unix(sudo:session): session opened for user root by adlai(uid=0)
Jun 29 11:05:17 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:17 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:17 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:17 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:17 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:17 maria kernel: psmouse serio4: issuing reconnect request
Jun 29 11:05:19 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:05:39 maria kernel: psmouse serio4: bad data from KBC - timeout
Jun 29 11:05:39 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:39 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:39 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:39 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:39 maria kernel: psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
Jun 29 11:05:39 maria kernel: psmouse serio4: issuing reconnect request
I'm also having some other smaller issues that I'll work on before asking about. I tried rolling back the kernel back to before the update but it didn't change the charging behaviour or help with the touchpad. I'm going to try rolling everything serious-looking back but wanted to post first in case anyone has any ideas.
thanks for the help, and please let me know anything else required.
Last edited by htedrom (2014-07-01 05:01:52)I have the same problem with the touchpad. It stopped working after update.
-
[Solved] Strange font problem - after update.
Hello guys,
encountered a strange small font problem on sites with code wrappers like stackoverflow/blogs/jsfiddle. After update. took a look at my font setup all looks good.
I've also checked the settings for gtk2/3 and no problems there.
INFO:
Google-Chrome-Beta. [same thing]
Firefox [same thing]
/etc/vconsole.conf ->
KEYMAP=sv-latin1
FONT=ter-112n
.gtkrc-2.0->
gtk-theme-name="Clearlooks"
gtk-icon-theme-name="Faience"
gtk-font-name="Tewi 9"
gtk-cursor-theme-name="Adwaita"
gtk-cursor-theme-size=0
gtk-toolbar-style=GTK_TOOLBAR_BOTH
gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
gtk-button-images=1
gtk-menu-images=1
gtk-enable-event-sounds=0
gtk-enable-input-feedback-sounds=0
gtk-xft-antialias=1
gtk-xft-hinting=1
gtk-xft-hintstyle="hintfull"
gtk-xft-rgba="none"
/gtk-3.0/settings.ini->
gtk-theme-name=Clearlooks
gtk-icon-theme-name=Faience
gtk-font-name=Tewi 9
Any ideas on this problem would be greatfully appreciated.
http://imgur.com/MD7yPI2
Mod note: removed huge image -- WorMzy
Last edited by Learning (2015-05-22 21:55:07)Update:
Tried reinstalling, change the fonts, remove all font clear the cache.
change, look up the settings, looked up size, tried monitor dpi.
checked all the config files for anything remotely related to this problem.
Had a quick look at the bug tracker for google-chrome-beta as well no reported
font problems as far as i can find.
Update2:
Tried adding custom.css to the browser not even that worked.
update3: [SOLVED]
So i solved the problem.
The problem was a faulty font that was stuck and used in the pre somehow.
Removed and added another to the list and somehow that worked.
recommendations - if anyone has this problem in the future.
open firefox and look in the font tab what is used. and remove that
or try to install a fixed one. that should work.
-Nothing has yielded any working results.
So any ideas at this point would be most appreciated.
Thanks,
-L
Last edited by Learning (2015-05-22 21:59:14) -
Unable to play any music after updating FRONT ROW TO 1.2.2
Please help, my Front Row refuse to play any music, after updating to 1.2.2 a day ago.
it shows all the folders in the iTune and the playlists but none of the songs in the folder, you keep pressing play and pause button and it TAKE YOU TO A shufle and the n ext one massage says "A PROBLEM HAS OCCURED".
It play the music videos and movies fron Front Row.
Please anyone enlighten me with your wisdom.
L. Namgyal
iMac inTel Mac OS X (10.4.7)Hi
I have the excact same problem, however the problem is in my case not the upgrade in Frontrow, as the trouble was present before aswell. Everything works fine for me ONCE, but if i return to my desktop after having activated frontrow, and then reactivate it, i get the same error as you. I can solve the problem by Quiting FR and then relaunching it again, but this is not acceptable.
Maybe you are looking for
-
How to get attribute value from standard page ?
Hi, How to get attribute value from standard page ? String str = (String)vo.getCurrentRow().getAttrbute("RunId"); But this value is returning a null value .... Can anyone help me to get this attribute value which is actually having a actual value .
-
My iMac G5 has suddenly started running very slow. I've already gone through all the tricks I can think of, including reinstalling Snow Leopard and running a hardware test, which tells me my computer is OK, which it most definitely is not. Every litt
-
How clear search history Google?
How do I clear my search history in Google? I think Safari alone keeps this, and it pollutes searches down the road. thanks.
-
Converting user level personalizations to site level personalizations
Hi All, My Requirement is as follows: In one search page i have created one view to save my search by providing view name. Now if i login from different user i am not able to see that view name in the drop down which i have created from different log
-
Hi I changed the datafile offline, and the database is noarchivelog mode. After a few days I want to bring the datafile online. Since there will be no transactions to this datafile, during recovery oracle only need to update the checkpoint scn of thi