Anyone has setup document for R12?

Hi all,
Does anyone has setup document for R12 in any modules like PO, OM, INV, AR, AP or GL?
Thanks,
FAN

Hi,
What setup documents you are referring to?
Oracle Apps documentation can be found at:
Application release 11i and R12
http://www.oracle.com/technology/documentation/applications.html
For AIM documents, please refer to:
AIM Methdology
Re: AIM Methdology
Regards,
Hussein

Similar Messages

Dataguard document for R12.1

We plan to implemnet Dataguard on EBS R12.1 (Redhat Linux). I only found document for R12:
Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC
Doc ID: 452056.1
anyone know document for R12.1 (ORACLE 11G database)?
Thanks.

Hi,
Please refer to the following threads.
Help Required to impliemnt the DataGuard Broker in 11.1.0.7
Re: Help Required to impliemnt the DataGuard Broker in 11.1.0.7
Step to setup the Dataguard in 11.1.0.7
Re: Step to setup the Dataguard in 11.1.0.7
Regards,
Hussein

Anyone has a solution for the problem: typing keywords and suddenly it does not work anymore. Mostly I have to restart my iphone 4Gs

Does anyone has a solution for this problem?
Since I updated to iOS 6 sometimes my keywords did not work.
I always have to restart my iPhone to have it work.
It's ridiculous to always restart my phone.
If you also have this problem you can repost + give some tips.
Thanks and greetings,
Max Louis

Hi Alo816,
I'm sorry to hear you are having such extensive issues with Messages on your iPhone. If you continue having issues sending or receiving Messages, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages - Apple Support
If you continue to have issues with Messages after that troubleshooting, especially if it is still having or crashing, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPhone to factory settings and testing it in that default condition to see if the issues persist before restoring your data. You may find this article useful:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
- Brenden

Setup document for FSG

Hello,
I have little idea about FSG but i couldn't map the balance sheet/Trial balance/Profit & loss...so kindly send me any document for setup....It will be big help
Thank you in advance@@

You can refer the below FSG whitepaper
https://community.oracle.com/servlet/JiveServlet/downloadBody/912237-102-1-28873/FSG%20Setup.PDF

Functional Setup Document for OTL

Hi,
Can some one please suggest the OTL functional setup document that simplify me the things need to do to setup the OTL.
Thanks,
Madhav

Oracle EBS documentation can be found at -- http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Best Way to Setup Document for Colored Paper Job

Hi, we're running a business card job that will print on a red-colored paper (well, white & red duplexed for a white front & red back).
Curious to know the best way to set this up for both soft-proofing here, and to send the most appropriate files to the printer. We'll separate out the backs of the cards that print on red into their own document (since the fronts will run on white).
On these backs, there will be a background image that is a colored grayscale image with the foreground being a darker PMS red than the paper color (for a bit of a tone-on-tone effect). And the type will be engraved with opaque white.
- Should I change the 'Paper' color to a CMYK simulation of the paper color?
- Or is it better to setup a 'background layer' set to not print and filled with the red paper color?
- How exactly should I setup the opaque white for the type? I think if I left Paper as white, applying the Paper or default white swatch would not set the type to print using a spot color, it would just knock it out, correct?
THANKS! Don't do this too often.

Ultimately for print production you will need the opaque white as a spot color, so create a spot swatch 0C, 0M, 0Y, 0K. As for the background image that you are printing on red stock, I would create a layer for the red stock, set the image on another layer that has a multiply effect, and this could be used for the proof. The print file, you would not need the layer for the red stock, and you wouldn't need the image to multiply either.
Why not just print a solid red with reverse type, instead of an opaque white on colored stock?

Anyone has a remedy for mail/leopard sending emails problem ?

I just spend hours on my MBP trying to set up MAIL and on various forums trying to find a cure for what seems to be a common problem on Leopard, not being able to send emails. I like many others are getting the "can not send message using the smtp server verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator"
Ok I verified till I was blue, all settings are ok, info provided by ISP and checked, I tried various other combinations and I keep getting the same message. I can receive emails no probs and I can also send emails to myself . I looked on Apple site and it just tells me to check everything, yes it's a known problem but no cure in sight.They simply can't be serious and expect people to be without such an important function? So this means that I cannot send emails until someone gets off their a**e at Apple and fixes this problem ? Can any of you kind folks help, what else should I try ? I have been on Apple now for half a year but encountered same problems and grief as I had with windows for years.

found problem
im using aol still
aol just implimented a image verification (stupid) i downloaded the new aol desktop for mac and tried sending a test email.. it asked me to verfiy myself and now it works... dumb
so if you have same problem, download aol desktop for mac and send a test email, it will tell you do a image verfication.. do it and then it will say you can now send email...
how stupid... like the login/password wasn't enough...
and now i just can't even imagine why they are loosing money and almost gone (aol)

Can anyone recommend a good document for Cisco IDS and AAA

I need some basic tutorial for Cisco IDS and AAA. can anyone recommend any document for it?
thanks

The Cisco IDS/IPS senors do not perform any AAA functions. You can not validate a user/password externally.

Document for OBIEE 11g services

Hi Gurus,
I have a requirement wherein we need to run the OBIEE 11g services(Weblogic server and node manager) in background in AIX instance. If anyone has a document or step by step procedure for that, please share it.
Thanks in Advance.
Raghu

Hey guys..
I got solution for the above post from my ofc Techhelp. Below is the proceedure to start the Obiee11g services on background-AIX.
Consider the below steps to run the services in background.
To start the Weblogic Server:
Go to the below directory location
$OBIEE_HOME /user_projects/domains/bifoundation_domain
Command:
$nohup sh ./startWebLogic.sh -Dweblogic.management.username=weblogic -Dweblogic.management.password=<Password> > wls_start.log &
$tail –f wls_start.log
To start the Node Manager:
Go to the below directory location
$OBIEE_HOME/wlserver_10.3/server/bin
Command:
$nohup ./nodemanager.sh &
To Start OPMNCTL:
Go to the below directory location
$OBIEE_HOME /instances/instanceN/bin
Command:
./opmnctl startall
./opmnctl stopall
./opmnctl status
Thanks,
Raghu Nagadasari

Upgrade document for 11.5.9 to 11.5.10 and Oracle Interview Q&A

Hi
i am srinivasan working as OracleAppsDBA...
I am want ur Help for upgrade 11.5.9 to 11.5.10 exact upgradation steps.
and i am want Oracle AppsDBA interview Q&A
I am waiting for your reply.
Please reply to following ID : [email protected]
If anyone have upgrade document for 11.5.9 to 11.5.10 please send it to me............
If anyone have Oracle Interview Q&A please send it to me........
Thanking you,
Regard's
Sreene

Thanks for the replies,
I have a coupld of additional questions relating to this. I've logged an SR with Oracle support to get their veiw of the whole process (and these questions)... I was just wondering what people's opinions here were;
1) 11.5.10.2 patch pre-reqs - would they have to be applied on the TRU64 server before exporting the database or could they be done on Solaris?
2) Are there any issues with running the 11.5.10.2 patch against an $APPL_TOP that's already at 11.5.10.2?
Thanks
Des
Oracle have just come back on the SR and advised that the aproach detailed is not corrent! They are advising;
o do such upgrade and migration, please perform the following steps:
1. Migrate the application tier from HP TRU64 to Solaris using the following document:
NOTE.238276.1 Migrating to Linux with Oracle Applications Release 11i
2. Migrate the 9.2.0.8 database from HP TRU64 to Solaris using the following document:
NOTE.230627.1 9i Export/Import Process for Oracle Applications Release 11i
3. Upgrade the application from 11.5.9 to 11.5.10.2 using the following document:
NOTE.316365.1 Oracle Applications Release 11.5.10.2 Maintenance Pack
4. Upgrade the database from 9.2.0.8 to 10.2.0.3 using the following document:
NOTE.362203.1 Oracle Applications Release 11i with Oracle 10g Release 2
Which is a lot more steps (indeed merging APPL_TOP to go from 2 to 1 server being one ofg them).
Any thoughs
Message was edited by:
Des

Setup docs for oracle learning management

hi gurus... plz can u help me with setup documents for oracle learning management??
it is urgent plz any help will be much appreciated!!!

Hello Scorpion,
If you're asking about the Oracle documents for OLM, they can be found here under "Learning Management/Training Administration" for e-Business Suite 11i:
download.oracle.com/docs/cd/B25284_01/current/html/docset.html
Alwyn

Anyone have a VI for the SR844?

I'm looking for a VI to control a lock-in amplifier from Stanford Research
Systems with LabView. If anyone has one they could send me, or for the SR830,i
would appreciate it very much. I'm also just learning labview, so if anyonehas
any tips for using labview with the SR844 they would definitely help.

zach prager wrote:
> I'm looking for a VI to control a lock-in amplifier from Stanford Research
> Systems with LabView. If anyone has one they could send me, or for the SR830,
> i would appreciate it very much. I'm also just learning labview, so if anyone
> has any tips for using labview with the SR844 they would definitely help.
You should go to NI's web site (www.ni.com) under support and search the
instrument driver database. There are several VIs for SR products. I did not
see any for the 844 but there is one for the 830.
You can get the drivers for a similar instrument and possibly modifiy them for
the 844.
Most vendors use similar drivers for similar instruments.
Kevin Kent

Anyone got an "Out For Delivery" yet?

Just out of curiousity I called CS to inquire. Since lots of people have gotten tracking #'s and I haven't even got a "shipped" email yet.
She went to give me my tracking # and it wasn't showing up. So she checked with her "Supervisor" and said that it hasn't even left the warehouse yet. She said no one's pre-order will leave the warehouse and I should expect delivery on the 10th. I wasn't going to argue with her because that won't get my phone here any faster.
My bank account has not been charged yet, but the 3 cases I bought on ebay yesterday afternoon have cleared the account.
She promised me I do have a phone coming, so maybe the are waiting to charge my account til it ships, which is different than others I know, but whatever.
Just curious if anyone has an "Out for Delivery" yet today?

twinmom05 wrote:
I dont have an OUt for Delivery but when I track it on UPS it sais origin scan in memphis last night around 6 pm, then it was departure scanned out of memphis at 6 this morning, then it arrived in louisville at 9 and departure scanned again at 10. ??? I called UPS and the lady said it should be delivered today since it was sent next day air yesterday.
What are your ??? for? Do you not realize that everytime the phone changes legs of its deliver there is an arrival scan and a dparture scan? That means your phone went from memphis to louisville, sat at louisville for an hour then was placed on a different truck to go out to the nex stop/delivery.

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

Anyone has setup document for R12?

Similar Messages

Maybe you are looking for