Anyone has tried to read there sms from backup files on mac from iPhone?

I have been trying to read my sms backup files I found out where there at on my mac but can't read them.  I was told I needed a sqllite reader but i can't find one that works.
Any ideas?

Get this:
http://supercrazyawesome.com/
And this:
http://menial.co.uk/software/base/

Similar Messages

  • Anyone has tried export Portal from 9.0.4 version and import into 10.1.2

    Anyone has tried doing that?
    I failed in checking of version compatibility when doing import.
    But I think 10.1.2 is higher version, why cannot accept data from 9.0.4?
    Rgds,
    Joe

    We were not even successful doing an import with in 9.0.4 versions. When we tried importing from 9.0.4.99 to 9.0.4.120 (?), it failed the version compatibility check. Is there any way to verify what versions can be successfully imported and then bypass the version check?
    Rgds/Mark M.

  • Is there a log of files/folders deleted from server?

    Is there a log of files/folders deleted from our server that I can look at?

    Hi again Christiaan, I'd be wary of upgrading your server just for this feature. This article mentions the pitfalls of the different server setups, loss of server preferences when upgrading etc...
    The benefits of having file and folder creation/deletion logged could be easily outweighed by the loss of auto setup of users mail and the other features that 'just work' in a standard install.
    Cheers

  • Iphone data recovery from backup file

    Hi,
    My iphone 5 is damaged, I am forced to switch to Nokia N8 as the stop gap arrangement till iPone is repaired/replaced by the service centre. I have iPhone backup file on my computer. How do I recover data from backup file to restore it to Nokia N8.
    Regards

    The iTunes backup of an iPhone is stored in a format that is designed only for use in restoring to an iOS device. There are some 3rd party programs that will read and extract that data however. That would get you to the point of being able to see and use the data on your computer at least. I can't help with how you would then get the data to the Nokia but a Nokia forum might. One example of a backup extractor program that is reputable is http://www.wideanglesoftware.com/ibackupextractor/ but there may be others that are cheaper or free.

  • How do I restore iTunes library from Backup files on External Hard Drive?

    How do I restore iTunes library from Backup files on External Hard Drive and keep the new iTunes library on the External Hard Drive. I have all the media and playlist and .xml .itl files, just want the iTunes to recognise the content.
    I backedup my iTunes content by dragging to External Hard Drive. Formatted and reinstalled OS. My iTunes content is so large, that I wish for the Library and content to remain on the External Hard Drive. I have all the music files and playlists, I just cannot get the iTunes application to display all the content. Hoping to Not have to drag and drop all the content to be recopied into new iTunes organised files.
    Troubleshooting this by researching other conversations on the web, I have come stuck for a solution. One Troubleshoot told me to hold down the Command key and then lauch iTunes and a dialogue box will appear to Choose a new library, however when I try this, no Dialogue box appear to give me the option!?

    It sometimes has that funny switch symbol on it too.  
    tt2

  • When I try to open a document from my file on Mac OS X the following message appears, with the Bluetooth logo: 'SELECT A BLUETOOTH DEVICE ....Select a device to send file ...' I then have to go to the source of the document, e.g. Pages, to open the file.

    When I try to open a document from my file on Mac OS X the following message appears, with the Bluetooth logo: 'SELECT A BLUETOOTH DEVICE ....Select a device to send file ...' I then have to go to the source of the document, (e.g. Pages), to open the file. Please could someone help?

    The Get Info dialog should look something like this:
    The "Change All" button should be at the bottom of the "Open With" section.  This is how it appears in Snow Leopard.  Other OSX versions many be slightly different.
    If something is changing the setting back to something else you may have a deeper problem than I am able to help you with.  What is appearing in the Open with area before you correct it?
    If the problem is still persisting, instead of double clicking on the file to open it, try right or control clicking and then select Open With and choose the proper app from the list.

  • HT4437 how may I add files to time capsule apart from backup files?

    how may I add files to time capsule apart from backup files?
    I'm able to perform backup (time machine). May I add pictures, texts, movies...?
    Thanks

    not sure if this is a spc. appletv question or if you posted it in the wrong forum but there is no way
    for an appletv to access files directly from an time capsule it can only! access a shared lib from itunes from a computer running and running itunes

  • HT203177 My new Time capsule 802.11n (4th generation) remains saving after a long time (3 weeks) but there is no backups files in time machine. It seems that it is working without results. What should I do?

    My new Time capsule 802.11n (4th generation) remains saving after a long time (3 weeks) but there is no backups files in time machine. It seems that it is working without results. What should I do?

    Hello, no experience with TC, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • How to read the backup file of my own iphone...

    how to read the backup file of my own iphone... becase I'm running out of space in my iphone so  need to delete some photos. I wanna know do i have to copy photos to my computer or is it available in the back up file ????

    Always move (copy and delete) your photos from Camera Roll to your computer.
    Camera Roll is the digital camera card.

  • Extract SMS and contacts from Backup File

    Dear all,
    I had my Nokia N80 mobile phone stolen, and the only thing that I have to restore my data is the nbu backup file ( generated by Nokia Ovi Suite).
    Please, Does somebody know how to extract/export my contacts and SMS (text messages) from  nbu backup file?
    I appreciate any help you can give me,
    Thanks

    Hi cjlim,
    thanks a lot for helping
    > There are some 3rd party applications which will open nbu files.
    > The one I am familiar with is called Noki and it is available from nokisoft.com.
    Please, Do you know any free/GNU solution?
    I couldn't extract/export all data that I need using Noki due to the free edition limitations =/
    Does Nokia Ovi Suite support reading and export user data from its backup file?
    > if you are planning on replacing it with another Nokia
    It is not the case, I am planning to buy an Android phone
    thanks a lot,
    Roger

  • Is there any way to remove my hard drive with backup files in it from the exclude these items from backups???

    I currently have a MacBook Air and a 1TB external hard drive, and I run my iPhoto Library from the EHD and as well have TM backup my computer to that same HD. The problem I have is that I don't have a backup of that HD which has all my photos and other media, so If the HD takes a crap I can be in big trouble.
    So what I did is I purchased a new HD (My Cloud from WD) to back up my EHD. While setting everything up I ran into this
    TM included the EHD in the "Exclude these items from backup" list and I can't touch them, and I tried everything. I later found this
    The last sentence of #3 states why I can't.... Since the EHD has a backup file in it, it is excluded.
    So..... Does anybody have any idea of a way around this? Would I have to restart everything and set it up different? Or just have a better and easier way of doing this?? I'll appreciate any help and suggestions.

    What you need, is a dedicated image restauration filter that recognized the regular frequency pattern superimposed onto the prints. You can do this in advanced Image processing packages that let you compute the fourier transform of the image and then suppress or attanuate the frequency bands of the artefact with a band-stop filter.
    But neither Aperture nor PhotoShop have this kind of filter. In Aperture and Photoshop you can only soften the effect by blurring and then exporting a smaller version of the image.
    The algorithm that your scanner uses is probably the best that can be done, even if the resolution is only 100 dpi. 
    Do you still have the negatives? Scanning the negatives at a high resolution may give you better results.
    Regards
    Léonie

  • Read files in Mac from Windows?

    I am using OS X 10.5.6 and Windows XP using Boot Camp. While working on Mac, I can read files from Windows.
    Is there a way to read files on mac when I work on Windows?

    Hi,
    yes there is.
    It's called MacDrive and you have to buy it: http://www.mediafour.com/products/macdrive/
    Without this Windows is not capable of seeing or using the Mac OSX partition.
    Regards
    Stefan

  • Can I migrate files to Mac from PC using iCloud?

    We have just got an iMac and I have been trying to migrate files etc. from our old PC using Migration Assistant, but to no avail. PC says Mac is trying to connect, Mac says it has found PC but that is as far as I can get! Has anyone any suggestion? I am not at all used to Mac, having had PCs for the last 18 years, but I use iPad and iPhone as does my husband, and so we wanted to treat ourselves, expecting we would be able to link up easily with these items. I'm sure it will be, if I ever manage to get our files transferred! Our son suggested it might be possible to use iCloud but I have seen nothing to suggest that - would it be possible?
    Please can anyone advise?

    I don't think using iCloud would work because there is no storage there expect for Mac files. If you can't get Migration Assistant to work, you can copy the files to an external dive and then to the Mac,
    Migration Assistant
    Migration Assistant (2)

  • Lost G2 iPhone & can't sync G3 replacement from backup files

    I lost my G2 original iPhone & replaced it today with a current G3 iPhone but am unable to connect my new G3 iPhone to my G4 Ti Laptop - as it has only a USB 1.0 port (the new G3 requires USB 2.0). So I am unable to directly recover my contacts from my G4 laptop - where there is a recent backup of everything.
    I have a new Macbook Pro 15", to which I have transfered all the files from my G4 from (iPhoto library, & iTunes library) However, the Contacts would not transfer from my G4 to the Macbook Pro during Firewire move....). So, I am looking for a means to get the contacts to my new laptop, & thus to my new G3 iPhone...
    Your comments and suggestions are much appreciated.
    Ward

    Hello fido164,
    To get your contact database from the G4 to the MacBook, you can try the following:
    On the G4, open Address Book and:
    For 10.4.x - choose Backup Address Book from the File Menu
    For 10.5.x - choose Export > Address Book Archive from the File Menu
    Save the resulting file to your Desktop.
    Right-click or Control-click the file and:
    For 10.4.x - choose Create Archive of xxxxxxxxx
    For 10.5.x - choose Compress xxxxxxxxxx
    Move the resulting zip file to the MacBook via CD, thumbdrive, external HD, etc.
    Decompress the file on the Desktop of the MacBook (this will transfer ownership of the file to the User on the MacBook.
    Open Address Book and choose Import > Address Book Archive -- this will import the contact data into Address Book.
    You can find some useful information for backing up Address Book here:
    http://support.apple.com/kb/HT2486
    Charles H.

  • I burnt a dvd from a file I exported from quicktime using the share with apple and pc option.  It was burnt directly from the finder. The dvd works perfectly on my mac, and also runs in my windows, but the sound in my windows pc is stammered.

    This is file I created in SnapzPro (which was saved as a Quicktime mov - Animation) of a Powerpoint Presentation.

    Jon, how do I re-compress the Snapz data for dvd playback?
    That depends on your specific work flow strategy. I normally perform the processing in two stages if editing is involved or in a single stage if I don't plan to trim, title, add a narration track, add special effects, and/or add filters to the Snapz Pro X captured screen data.
    In the two-stage process you export the captured data to an intermediate low-compression, high-quality fomat. (This can be the default settings for Snaps Pro X or a more modern editing specific format like ProRes 422/Linear PCM depending on the codec components for which your system is configured and your personal editing preferences.) The Snapz Pro X intermediate file is then edited in the application of your choice and the results are re-compressed to your final target compression format.
    In any case, whether you are re-compressing the data using QT 7 Pro, iMovie, GarageBand, MPEG Streamclip, Snapz Pro X, or similar third-party app that accesses the built-in OS X QT routines, the export process is essentially the same. Whether you use a "Movie to MPEG-4" or "Movie to QT Movie" export, you must export to a data rate limited, multi-pass H.264/AAC compression combination to take advantage of the "Optimize of CD/DVD" option. Specific data rate limits depend on the playback dimensions of the file you are creating, the minimum level of quality you will accept, and the playback speed of the hardware to be used. (I normally target 4X-8X settings for SD content but if you know the recipient has a higher rated optical drive and your content is HD, then you can use higher encode settings for improved quality.)
    I captured the slideshow again in Snapz, and saved it as H264/AAC. Is this good enough?
    If you did not specifically use the "Optimize for..." feature, then the file is automatically targeted for "Computer" playback which assumes playback is from an hard drive which has greater bandwidth/faster throughput than an optical media player. If the target display dimensions are resonably small, the the contextual nature of the H.264 video encoder may or may not be within the playback limitations of an optical drive usually depending on the encode matrix dimensions, graphic complexity of the source data, overall brightness of the scenes, and limitations you may have place on the target file—i.e., the larger the encoding dimensions, the faster the data date and the less likely the file will be compatible with optical drive playback without having to constantly interrupt playback to cache/rebuffer additional data. However, you can always tell the recipient that if this happens, he or she should simply copy the movie file from the CD/DVD to their hard drive for playback.
    What now? Do I open it in Quicktime and use the "share for mac and pc", then right-click on it in the finder and "burn to disc?"
    What you do next depends on how you plan to burn the file. The steps explained above allows you to create a file that is compatible with playback from an optical drive in a QT Player app but is not authored for playback from a commercial DVD Player. Your next step is to burn that file to an optical disc that can be read by your recipient's computer. I my case, I normally burn the disc using a hybrid (HFS Plus/ISO 9660) format which supports HFS Plus, ISO-9660, Rock Ridge, and Joliet with Rock Ridge file systems. How you do this is up to you. You can, for instance, use a third-party app like Toast or Dragon Burn to create a data disc; create/burn an image file with your Disk Utility app (this is a good option if you plan to burn several discs now and/or in the future); create a named "Burn" folder, drop the file to it, and press the burn button; or simply insert a blank optical media disc into you optical drive, change the default disc name to whatever you want, drop your file to the blank media's Finder window, and press the "Burn" button. (NOTE: Burn options may differ depending on the software installed on your system and/or the version of OS X under which you may be operating.)
    Dont see any specs re playback from an optical disc drive? The slideshow is only 3 min long, and I want to avoid turning it into a video DVD using iDVD, iMovie etc, as the quality of the pictures and type degrades badly. Thanks for the help. Been struggling with this for weeks.
    As noted above, this is an encode setting that only becomes active when you are targeting your H.264/AAC encode for multi-pass/data rate limited compression. When active, the "Optimize for..." pop-up allows you to select "computer" (targets playback from a hard drive), "CD/DVD" (targets playback from optical media), or "Streaming" (targets playback from a realtime streaming server) options. This option prevents data rate excursions from exceeding limits normally associated with each of the named types of playback. This option has nothing to do with the file system used to burn the media disc which determines which platforms/OS can read the disc and the file it contains.

Maybe you are looking for