Anyone has 'Yourlink'?? Nothing works here with me, really desperate, need HELP, please!

Hi there, I have wireless internet through 'Yourlink.ca'. The cable comes from the roof, goes through a modem and gets plugged into my computer.
I tried everything with my Linksys router, every connection option, a really nice and IT guy helped me for a few days, I tried a crossover cable, nothing works.
The connection from computer to router is fine, but something does not line up from modem to router . . . When I've had everything installed and connected I've had to give in the DNS addresses I have from yourlink by hand to have some and those ones were the only numbers displayed on the 'Status' page.
I really dont know what to do anymore, please can anybody help me?? Yourlink is really not very helpful in that matter, even so they should know what works best with their connections/modems to routers, you get only some very plain answers on the first help level.
There should be an easy explanation to everything, I am starting to loose my mind!
Thanks for any input, even if I tried it already.
... Poldy didn’t know exactly what the Magical Horses were able to do, but she had a strong feeling that their magic would work for the good of all micekind and all mankind, for the good of all creatures both here and far away...

Hello and thanks for helping. Here is the info you wanted:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Beate>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : yourlink.ca
IP Address. . . . . . . . . . . . : 139.142.49.108
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 139.142.49.65
My cable comes directly from the roof where the little dish is installed and before it comes into the room it goes through the modem, so it hangs all together. The modem is on the wall of our sunroom and from there the cable comes into my computer room through the wall.
Hope that is helpful. Thanks very much.
... Poldy didn’t know exactly what the Magical Horses were able to do, but she had a strong feeling that their magic would work for the good of all micekind and all mankind, for the good of all creatures both here and far away...

Similar Messages

My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

Last login: Sun Apr 22 19:11:11 on ttys000
Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
total 40
drwx------   7 ryanmnhs staff   238 5 Nov 23:09 .
drwx------@ 48 ryanmnhs staff 1632 13 Jan 09:53 ..
-rw-r--r--   1 ryanmnhs staff   574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
-rw-r--r--   1 ryanmnhs staff   618 22 Oct 2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
-rw-r--r--   1 ryanmnhs staff   895 4 Sep 2011 [email protected].plist
-rw-r--r--   1 ryanmnhs staff   802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
-rw-r--r--@ 1 ryanmnhs staff   805 6 Sep 2011 com.google.keystone.agent.plist
Marlons-MacBook-Pro:~ ryanmnhs$
,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU...

After updating my Iphone 5 my lock button isnt working well .... Need help please ..

After updating my Iphone 5 my lock button isnt working well .... Need help please ..

First, read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/
See if your phone is affected.

HP Pavilion a6000 desktop with Vista black screen - need help please!

I have an HP Pavilion a6000 desktop with Vista. Yesterday it was working fine and today we have the black screen that reads:
Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to boot from it...Fail
Detecting IDE ATAPI device...
Detecting IDE ATAPI device...
Detecting floppy drive A media...
Drive A error. System halt
I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive. I also pulled out the round battery, waited and then reintstalled. Same problem.
Also, computer emits a single, repeating beep after startup.
HELP!

jjeahall
I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
"There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on. You can search for Bios beep codes in Google. Here is an example of results in Google search"
Link
Also I went into the Troubleshooting Guide for the A6000 and found the following information. You need to use F11 for recovery. See below
Starting System Recovery from system startup
1
Turn off the computer. If necessary, press and hold the On button until the computer
turns off.
2
Remove the HP Personal Media Drive if your computer includes one. Disconnect all
peripheral devices from the computer except the monitor, the keyboard, and the
mouse.
3
Press the On button to turn on the computer.
4
During the startup, do the following to enter the Recovery Manager program:
When the blue screen with the HP Invent logo appears, press the F11 key on the
keyboard. (You have only a few seconds to press the F11 key before the normal
startup process continues.)
5
The computer starts the Recovery Manager program; wait for the onscreen instructions
to display, and then follow those instructions.
6
Complete the computer startup, finish the registration process, and wait until you see
the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
the computer.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

I am running windows 7 and trying to download Firefox 3.6 with no luck. Need help please!

I have found the site where you are supposed to beable to run a "downgraded" firefox but when I downloaded it and the installer came up it would not move forward unless I upgraded to the new 10 point something.
I am running windows 7 premier edition, 64 bit. Am pretty junior to computers so if anyone can help please be very specific and do it point by point, lol.

Just checking:
# Do you try to downgrade, because you had problems upgrading to the latest version? If so, have you tried the suggestions at [[Installing a previous version of Firefox]]?
# What is the actual message, when installing Firefox 3.6? Does it really mention that you need install version 10? Note that the latest version is 9.0.1.
# Did you download the installer from http://www.mozilla.org/en-US/firefox/all-older.html ?

I have an a MacBookPro and my key pad is not working properly. When I type 3 it puts in 3§. It works fine with an external keyboard. Help Please

Hi,
My Keybord on my MacBook Pro is doing the strangest things. If I type a 3 it puts 3§ if I type a 2 it puts a 2` if I type a 4 it puts a 4] and so on. It works fine when I add en external keyboard.
Any Idea's?
Thank you in advance.

Strange, try tapping your option key a few times...
Holding down the option key generates this set of symbols on the number keys: `¡™£¢∞§¶•ªº–≠
Does your computer do the same? (hold option and just tap each key on the number row progressively)
But number plus symbol is a strange sight to see. I don't have an answer for that.

Big Problem With Corrupted Image Library - Need Help Please

I recently updated my Aperture 2 (2.1) with the latest update. Upon doing so, most images in my library now show up in the 'ole maroon box with the message "Unsupported Image Format." This only began after the update. I've spent hours reading threads on here, but no real solution can be found. I've spent a few hours on the phone with Apple Support and in my local store at the Genius Bar. What they're telling me is that my library file has become corrupted. That my preview/thumbnails have become "diconnected" from the actual full size image file. I've tried holding down option + command while starting Aperture in order to "rebuild" it. That's made matters worse in that most, but not all, of my previews/thumbnails now are not showing up. When I go into my home folder and right click on the aperture library icon and keep burrowing in until I get to each image folder, everything seems to be there: the original RAW file, the preview file, the thumbnail file, the edits/changes files. I can even drag the original RAW file out and re-import it and then its fine. But I can't seem to also drag out the edits/retouching/changes. So even if I take each of my 1,300 images out one by one and reimport them, I still lose some 300+ hours of retouching. I can't even bare the thought of this. Does anyone know what the heck is really going on and whether there is some kind of fix for this? I'm just trying to get my library back to where it was before all the trouble started. Unfortunately, I do not have a back up from before I updated the software. Oh, we also tried removing Aperture and reinstalling to go back to 2.0, but the same problem is still there. Lastly, I cannot export any "versions" or "masters" in order to print, upload or email the images. So I'm really stuck here.

Welcome to club. This just happened to me also in a very similar fashion: Upgrade - upgrade works for awhile - and then the maroon screen and unsupported file message.
At least you are still somewhat functional. Very quickly the problem spread to my non Aperture JPEGS (I use Canon software to download from two Canon Cameras and then import into Aperture). At first all was ok with these files despite the issue with Aperture. Then they are started having the same problem once I shutdown the computer and restarted. This quickly spread to killing Aperture where it would not start at all. Then I lost Microsoft Entourage due to a corrupted data base. Rebuilding this data base via Disk Utility Verify and Repair Permissions made Entourage workable (but I lost my data and setup - it created a new instance.
Two calls to Apple made everything worse as every time we went back into Disk Utility, we would only fix problems to have them re-appear when the laptop was restarted.
Went to Genius Bar (twice). They archived and did a reinstall. They had to do this twice. Everything now works except for Aperture which will not launch at all.
Genius Bar told me to use Time Machine to reload Aperture. Three tries using three different backups have now resulted in nothing. I am about to try a clean install using my Aperture Disk. I will report back on this.
One thing I noticed before all this started - I had done a bunch of usual weekly software updates about two weeks ago. I was going on a trip so I let everything run (no issues). Time Machine did all the usual things including giving me the really useful message that my BackUp Disk was now full (meaning it is wiping old versions out). However, I then went to shutdown the machine and FileVault whirled for over 30 minutes before it allowed the machine to shutdown. Usually this is under 3-5 minutes if that long. FileVault has yet to make a re-appearance on any shutdown I have had in past two weeks regardless of changes on HD. Therefore I am wondering if there is a connection here.
I use a MacBook Pro with upgraded memory and HD.

A problem with my mifi 2200 need help please

Hey everyone. I came here to get help with my verizon mifi card that all the sudden after such a great run stops working!
I had bought two mifi 2200 cards at the same time about a year ago. All I did was turn them on and was getting Internet connection wirelessly to my ipad right away. My connection worked for ages and never had a problem until recently. One of the cards stopped working roughly about three months ago. I looked around online for things that perhaps was stopping the device from working. I figured that the device was ready for an update and that was prohibiting the device from working, but here is the weird part; the other card (the exact same one) was working when this first card I mentioned wasn't. The card working continued to work until just recently like a day or so ago. Odd right. Anyway, the first card I connected to the USB cord that was provided in the box into my laptop. I was immediatly prompted to download Verizon Manager. My first time ever getting to this step. I was connected to my Internet connection at home via LAN line because that was my only option to Internet. After the software was downloaded, I was prompted to update firmware in which I did, then I was told to update wifi area coverage information which is just that search for finding local wifi spots, the next one is the important one that never seemed to work. The message read somewhere along the lines of you need to update coverage area information as if in there was some new program via coverage to get the stuff to communicate with the device. I said yes and then a message popped up saying Activation and had this bar going side to side, but after a while was told the programming failed. The device has already been activated so I don't understand the reason for the word Activation. Regardless, I tried doing other things I've read on this forum like resetting the device, turning standby mode to never, and so forth, but none worked. The device powers on/everything is on, and I can connect to the device, but I have no Internet. Please, some one tell me what is going on.
Thank you and hope to hear from you soon.

Sounds like you botched a firmware update and bricked your MiFi.
Have you tried contacting VZW for a replacement device yet?

Re: Having some problems with the 8350i. Need Help Please!

Everyone I talk to hears echo's. I also don't get text messenges until sometimes a full day after they're sent. I wonder if our geographic area dictates why this is happening.. if you search the forum for "echo" there's quite a few people with the same problem. I'm in Florida.

How are you receiving the sms manually?
If your device is new, proceed to change the device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Having some problems with the 8350i. Need Help Please!

I just got the 8350i through Sprint/Nextel and already am having problems receiving text messages and when I finally do receive them (one day later or after turning set off then back on), I have to manually receive the message.
Also, I have customers complaining about an echo on their side of the phone every time they call me. Saw some others where having this problem as well.
Is there anything I can do to fix this? My phone is vital to my business and any help is greatly appreciated!!!
Thnaks!!

How are you receiving the sms manually?
If your device is new, proceed to change the device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Timing and control issues with tween transitions. Need help please!

Hi!
I have a script which sets the duration of the Tween
transition to 20 frames. How can I start another function when the
Tween transition's playback has reached frame 10 of the 20 frames?
The onMotionFinished property only works if I want to
initiate something at the completion of the transition but I want
to start something at a certain frame while it is still running.
var butWebX:Tween = new Tween(butWeb, "_x", Bounce.easeOut,
-300, 5, 20, false);
Also is there any way to control the duration or the speed of
the easing effect in the Tween transition class? ...by frames or
time?
thanks, Attila

There should be a slight symbol of the sim card indicating the direction it is be inserted.
Make sure at your carrier BIS site you do the CHANGE DEVICE and insert the new IMEi and PIN to move the accounts over to the new BB.
Let's get that working first.
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

Trying to sign in to itunes store via windows xp...get to id and pwd and then it says "This Apple ID has not yet been used with the itunes store...please review acct. info" Well how can I use it if you don't let me log in!?

Tyring to sign in to iTunes store viz windows XP...I get to entering my ID and PWD and then the message pops up "This Apple ID has not yet been used with the iTunes store...please review acct. info." HELP! I have cleared DNS, checked proper date & time and deleted SC folder from programs like support suggested--all to no avail.

The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store.

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Anyone has 'Yourlink'?? Nothing works here with me, really desperate, need HELP, please!

Similar Messages

Maybe you are looking for