Anyone have a diver for samsung Mono Laser Multi-Function Printer SCX-4828FN?

Hi all, does anyone have or know where I can get a new driver for a Samsung SCX-4828FN multifuntion printer?
thanks.

Hi, thanks you for the help. The issue was that the operating system kept responding that tere was an update but when it went lookig for it it couldn't find it at the source. I have since found a partial fix in that I deleted the original printer and installed a generic printer. It works OK. Thanks again Linc and RRFS for your assistance.

Similar Messages

Laser Multi-function printer recommendation

I know I'm probably not supposed to be asking for product recommendations here, but am not sure where else to go (if there are other good forums for this kind of thing, please let me know).
Anyone have any recommendations on a good laser multi-function printer? I'm interested in specific models, but am more interested in brands that are actually friendly to Macs in terms of updating software, providing support, etc. My current model is an HP Laserjet 3052, for which there is still no software update to accommodate for Leopard (which was released months ago).
Any thoughts? Thanks in advance.

After long consideration and being fed up with issues with HP printers in he past (especially with limited functionalities with Mac OS), I bought me a Canon MP560 this summer.
I think it's a great value for money, to refill the ink is reasonably priced (o.k., it could always be cheaper), but my most favorite feature is that I can print and scan from anywhere in the house. So far I am very pleased with both the scanning and printing results. Installation and handling of the SW suite is a child's play.
If I had to print more I would actually look into a Laser / LED MFP... perhaps the Brother MFC-9120CN or its wireless brother MFC-9320CW, which costs actually quite a bit more.
Unfortunately, as it seems, Canon has nothing to offer in this class of printers at reasonable prices that are also rated high.
Just my 10 cents.

Favorite Color Laser Multi Function Printer

Hi,
We have four computers all running OS 10.6 connected to Airport Extreme base. Currently using Brother 5440 inkjet connected via Ethernet to the Airport. It scans from all computers, albeit with an occasional restart of the printer. We're looking to replace it (bad printerhead) with a Multi Function Laser device. I've read many reviews, etc complaining about inability to scan over the network or driver problems (HP 1312) for instance. My printer tech person recommends Canon 8350 or HP 1312. Any thoughts on the best Snow Leopard compatible Color Laser MF Printer?

After long consideration and being fed up with issues with HP printers in he past (especially with limited functionalities with Mac OS), I bought me a Canon MP560 this summer.
I think it's a great value for money, to refill the ink is reasonably priced (o.k., it could always be cheaper), but my most favorite feature is that I can print and scan from anywhere in the house. So far I am very pleased with both the scanning and printing results. Installation and handling of the SW suite is a child's play.
If I had to print more I would actually look into a Laser / LED MFP... perhaps the Brother MFC-9120CN or its wireless brother MFC-9320CW, which costs actually quite a bit more.
Unfortunately, as it seems, Canon has nothing to offer in this class of printers at reasonable prices that are also rated high.
Just my 10 cents.

Anyone have a solution for the ubiquitous problem of the printer not recognizing a new HP cartridge?

I have seen other posts about the HP printers not recognizing that a new HP cartridge has been put in. At the price of the cartridges, this is a most irritating problem, and apparently a weak spot with the HP printers. Mine is not heavily used at all and this is the 2nd time it would not recognize. Thanks.

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Using iMovie 09, when downloading video fromm Samsung HMX- H106SN, The video image is stretched. Anyone have an idea for a fix?

Using iMovie 09, when downloading video from Samsung HMX- H106SN, the video image in iMovie is stretched. I see no obvious way to adjust this in iMovie. When played on HDTV directly from camera using HDMI, the video image is fine. Is this a compatibility issue? Anyone have an idea for a fix?
Thnx, olive.c

Thanks guys! Appreciate the help. Unfortunately I'm just not getting the same quality/file size/performance that I'm getting from the traditional Apple TV export option.
I did however find what I think might even be a better solution for anyone using a mono wireless mic system like myself... use what's called a 3.5mm stereo jack to 3.5mm mono plug adapter. They're only like $5 and not only convert the audio so it comes out of both speakers, but this is probably a better option cause now in post production (iMovie) the other tracks like music etc... are still in stereo.
Here's a link to the adapter on Tiger Direct... http://www.tigerdirect.com/applications/searchtools/item-Details.asp?EdpNo=93027 7&sku=C184-03174&srkey=3.5mm%20mono%20plug%20to%203.5mm%20stereo%20socket
Hope this helps!
Bryan

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

HT4623 I can't seem to get my keypad shortcuts to work on my iphone 4 after the ios6 update. Anyone have a fix for this?? Apple???

I can't seem to get my keypad shortcuts to work on my iphone 4 after the IOS 6 update. Anyone have a resolution for this??? Apple???

Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restoring your iPhone with iTunes from the backup.
Restoring your iPhone with iTunes as a new iPhone or not from the backup.
Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby.

Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

     I'm getting a lot of pop up ads. mostly while using Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
      I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
     Thanks
     Ron

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I am using photoshop cc 2014.2 And when I use save for Web it gives me a dialog box that says it is using Latin characters I've never seen this before. Does anyone have an answer for this problem or do I need to go back to the older version of Photoshop.

I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?

What Firefox version is currently installed on the computer?
You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have a button in JSP page inside an UIWebView by pressing the button i want to run another existing iPhone native application in background only.Do anyone have a solution for this.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another
existing iPhone native application in background only.Do anyone have a solution for this.

Sounds like a virus.... I hope it's not...
Launching Other Apps within an iPhone

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

HT1386 After updating my I phone 4s and I tunes, it downloaded my entire I tunes library to my I phone. I do not wannt all this music on my phone and have tried every thing to correct this with no results.Does anyone have a solution for this

After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone

BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared

Anyone have an Answer for the ipad Hotspot problem in Australia

Anyone have an Answer for the ipad Hotspot problem in Australia

Sorry but we can't really help you unless we know your problem. Enjoy your new iPad

Anyone have a diver for samsung Mono Laser Multi-Function Printer SCX-4828FN?

Similar Messages

Maybe you are looking for